| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #ifndef __TMIO_COMMON_H__ |
| #define __TMIO_COMMON_H__ |
| |
| #include <linux/bitops.h> |
| #define TMIO_SD_CMD 0x000 /* command */ |
| #define TMIO_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */ |
| #define TMIO_SD_CMD_MULTI BIT(13) /* multiple block transfer */ |
| #define TMIO_SD_CMD_RD BIT(12) /* 1: read, 0: write */ |
| #define TMIO_SD_CMD_DATA BIT(11) /* data transfer */ |
| #define TMIO_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */ |
| #define TMIO_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */ |
| #define TMIO_SD_CMD_RSP_NONE (3 << 8)/* response: none */ |
| #define TMIO_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */ |
| #define TMIO_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */ |
| #define TMIO_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */ |
| #define TMIO_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */ |
| #define TMIO_SD_ARG 0x008 /* command argument */ |
| #define TMIO_SD_STOP 0x010 /* stop action control */ |
| #define TMIO_SD_STOP_SEC BIT(8) /* use sector count */ |
| #define TMIO_SD_STOP_STP BIT(0) /* issue CMD12 */ |
| #define TMIO_SD_SECCNT 0x014 /* sector counter */ |
| #define TMIO_SD_RSP10 0x018 /* response[39:8] */ |
| #define TMIO_SD_RSP32 0x020 /* response[71:40] */ |
| #define TMIO_SD_RSP54 0x028 /* response[103:72] */ |
| #define TMIO_SD_RSP76 0x030 /* response[127:104] */ |
| #define TMIO_SD_INFO1 0x038 /* IRQ status 1 */ |
| #define TMIO_SD_INFO1_CD BIT(5) /* state of card detect */ |
| #define TMIO_SD_INFO1_INSERT BIT(4) /* card inserted */ |
| #define TMIO_SD_INFO1_REMOVE BIT(3) /* card removed */ |
| #define TMIO_SD_INFO1_CMP BIT(2) /* data complete */ |
| #define TMIO_SD_INFO1_RSP BIT(0) /* response complete */ |
| #define TMIO_SD_INFO2 0x03c /* IRQ status 2 */ |
| #define TMIO_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */ |
| #define TMIO_SD_INFO2_CBSY BIT(14) /* command busy */ |
| #define TMIO_SD_INFO2_SCLKDIVEN BIT(13) /* command setting reg ena */ |
| #define TMIO_SD_INFO2_BWE BIT(9) /* write buffer ready */ |
| #define TMIO_SD_INFO2_BRE BIT(8) /* read buffer ready */ |
| #define TMIO_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */ |
| #define TMIO_SD_INFO2_ERR_RTO BIT(6) /* response time out */ |
| #define TMIO_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */ |
| #define TMIO_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */ |
| #define TMIO_SD_INFO2_ERR_TO BIT(3) /* time out error */ |
| #define TMIO_SD_INFO2_ERR_END BIT(2) /* END bit error */ |
| #define TMIO_SD_INFO2_ERR_CRC BIT(1) /* CRC error */ |
| #define TMIO_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */ |
| #define TMIO_SD_INFO1_MASK 0x040 |
| #define TMIO_SD_INFO2_MASK 0x044 |
| #define TMIO_SD_CLKCTL 0x048 /* clock divisor */ |
| #define TMIO_SD_CLKCTL_DIV_MASK 0x104ff |
| #define TMIO_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */ |
| #define TMIO_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */ |
| #define TMIO_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */ |
| #define TMIO_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */ |
| #define TMIO_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */ |
| #define TMIO_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */ |
| #define TMIO_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */ |
| #define TMIO_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */ |
| #define TMIO_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */ |
| #define TMIO_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */ |
| #define TMIO_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */ |
| #define TMIO_SD_CLKCTL_RCAR_DIV1 0xff /* SDCLK = CLK (RCar ver.) */ |
| #define TMIO_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */ |
| #define TMIO_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */ |
| #define TMIO_SD_SIZE 0x04c /* block size */ |
| #define TMIO_SD_OPTION 0x050 |
| #define TMIO_SD_OPTION_WIDTH_MASK (5 << 13) |
| #define TMIO_SD_OPTION_WIDTH_1 (4 << 13) |
| #define TMIO_SD_OPTION_WIDTH_4 (0 << 13) |
| #define TMIO_SD_OPTION_WIDTH_8 (1 << 13) |
| #define TMIO_SD_BUF 0x060 /* read/write buffer */ |
| #define TMIO_SD_EXTMODE 0x1b0 |
| #define TMIO_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */ |
| #define TMIO_SD_SOFT_RST 0x1c0 |
| #define TMIO_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */ |
| #define TMIO_SD_VERSION 0x1c4 /* version register */ |
| #define TMIO_SD_VERSION_IP 0xff /* IP version */ |
| #define TMIO_SD_HOST_MODE 0x1c8 |
| #define TMIO_SD_IF_MODE 0x1cc |
| #define TMIO_SD_IF_MODE_DDR BIT(0) /* DDR mode */ |
| #define TMIO_SD_VOLT 0x1e4 /* voltage switch */ |
| #define TMIO_SD_VOLT_MASK (3 << 0) |
| #define TMIO_SD_VOLT_OFF (0 << 0) |
| #define TMIO_SD_VOLT_330 (1 << 0)/* 3.3V signal */ |
| #define TMIO_SD_VOLT_180 (2 << 0)/* 1.8V signal */ |
| #define TMIO_SD_DMA_MODE 0x410 |
| #define TMIO_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */ |
| #define TMIO_SD_DMA_MODE_BUS_WIDTH (BIT(5) | BIT(4)) /* RCar, 64bit */ |
| #define TMIO_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */ |
| #define TMIO_SD_DMA_CTL 0x414 |
| #define TMIO_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */ |
| #define TMIO_SD_DMA_RST 0x418 |
| #define TMIO_SD_DMA_RST_RD BIT(9) |
| #define TMIO_SD_DMA_RST_WR BIT(8) |
| #define TMIO_SD_DMA_INFO1 0x420 |
| #define TMIO_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete (uniphier) */ |
| #define TMIO_SD_DMA_INFO1_END_RD BIT(17) /* DMA from device is complete (renesas) */ |
| #define TMIO_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */ |
| #define TMIO_SD_DMA_INFO1_MASK 0x424 |
| #define TMIO_SD_DMA_INFO2 0x428 |
| #define TMIO_SD_DMA_INFO2_ERR_RD BIT(17) |
| #define TMIO_SD_DMA_INFO2_ERR_WR BIT(16) |
| #define TMIO_SD_DMA_INFO2_MASK 0x42c |
| #define TMIO_SD_DMA_ADDR_L 0x440 |
| #define TMIO_SD_DMA_ADDR_H 0x444 |
| |
| /* alignment required by the DMA engine of this controller */ |
| #define TMIO_SD_DMA_MINALIGN 0x10 |
| |
| struct tmio_sd_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct tmio_sd_priv { |
| void __iomem *regbase; |
| unsigned int version; |
| u32 caps; |
| u32 read_poll_flag; |
| u32 idma_bus_width; |
| #define TMIO_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */ |
| #define TMIO_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */ |
| #define TMIO_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */ |
| #define TMIO_SD_CAP_64BIT BIT(3) /* Controller is 64bit */ |
| #define TMIO_SD_CAP_16BIT BIT(4) /* Controller is 16bit */ |
| #define TMIO_SD_CAP_RCAR_GEN2 BIT(5) /* Renesas RCar version of IP */ |
| #define TMIO_SD_CAP_RCAR_GEN3 BIT(6) /* Renesas RCar version of IP */ |
| #define TMIO_SD_CAP_RCAR_UHS BIT(7) /* Renesas RCar UHS/SDR modes */ |
| #define TMIO_SD_CAP_RCAR \ |
| (TMIO_SD_CAP_RCAR_GEN2 | TMIO_SD_CAP_RCAR_GEN3) |
| #ifdef CONFIG_DM_REGULATOR |
| struct udevice *vqmmc_dev; |
| #endif |
| #if CONFIG_IS_ENABLED(CLK) |
| struct clk clk; |
| #endif |
| #if CONFIG_IS_ENABLED(RENESAS_SDHI) |
| unsigned int smpcmp; |
| u8 tap_set; |
| u8 tap_num; |
| u8 nrtaps; |
| bool needs_adjust_hs400; |
| bool adjust_hs400_enable; |
| u8 adjust_hs400_offset; |
| u8 adjust_hs400_calibrate; |
| u8 hs400_bad_tap; |
| const u8 *adjust_hs400_calib_table; |
| u32 quirks; |
| bool needs_clkh_fallback; |
| #endif |
| ulong (*clk_get_rate)(struct tmio_sd_priv *); |
| }; |
| |
| int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data); |
| int tmio_sd_set_ios(struct udevice *dev); |
| int tmio_sd_get_cd(struct udevice *dev); |
| |
| int tmio_sd_bind(struct udevice *dev); |
| int tmio_sd_probe(struct udevice *dev, u32 quirks); |
| |
| u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg); |
| void tmio_sd_writel(struct tmio_sd_priv *priv, |
| u32 val, unsigned int reg); |
| |
| #endif /* __TMIO_COMMON_H__ */ |