ARM: sunxi: Add basic A23 support
The basic blocks of the A23 are similar to the A31 (sun6i). Re-use
sun6i code for initial clock, gpio, and uart setup.
There is no SPL support for A23, as we do not have any documentation
or sample code for DRAM initialization.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 2a42dca..24f1dae 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -12,10 +12,12 @@
obj-y += clock.o
obj-y += pinmux.o
obj-$(CONFIG_SUN6I) += prcm.o
+obj-$(CONFIG_SUN8I) += prcm.o
obj-$(CONFIG_SUN4I) += clock_sun4i.o
obj-$(CONFIG_SUN5I) += clock_sun4i.o
obj-$(CONFIG_SUN6I) += clock_sun6i.o
obj-$(CONFIG_SUN7I) += clock_sun4i.o
+obj-$(CONFIG_SUN8I) += clock_sun6i.o
ifndef CONFIG_SPL_BUILD
obj-y += cpu_info.o
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 7d10f10..134a198 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -110,7 +110,8 @@
/* do some early init */
void s_init(void)
{
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \
+ defined CONFIG_SUN6I || defined CONFIG_SUN8I)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index 40c4e13..4f2a09c 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -27,6 +27,8 @@
puts("CPU: Allwinner A31 (SUN6I)\n");
#elif defined CONFIG_SUN7I
puts("CPU: Allwinner A20 (SUN7I)\n");
+#elif defined CONFIG_SUN8I
+ puts("CPU: Allwinner A23 (SUN8I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");