clk: sunxi: Store the array sizes in the CCU descriptor
The reset array size is currently used for bounds checking in the reset
driver. The same bounds check should really be done in the clock driver.
Currently, the array size is provided to the reset driver separately
from the CCU descriptor, which is a bit strange. Let's do this the usual
way, with the array sizes next to the arrays themselves.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[Andre: add F1C100s support]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/clk/sunxi/clk_f1c100s.c b/drivers/clk/sunxi/clk_f1c100s.c
index 72cf8a6..cb0159e 100644
--- a/drivers/clk/sunxi/clk_f1c100s.c
+++ b/drivers/clk/sunxi/clk_f1c100s.c
@@ -50,6 +50,8 @@
static const struct ccu_desc f1c100s_ccu_desc = {
.gates = f1c100s_gates,
.resets = f1c100s_resets,
+ .num_gates = ARRAY_SIZE(f1c100s_gates),
+ .num_resets = ARRAY_SIZE(f1c100s_resets),
};
static int f1c100s_clk_bind(struct udevice *dev)