ARM: OMAP4+: Make control module register structure generic
A seperate omap_sys_ctrl_regs structure is defined for
omap4 & 5. If there is any change in control module for
any of the ES versions, a new structure needs to be created.
In order to remove this dependency, making the register
structure generic for all the omap4+ boards.
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index fff89da..e5a5eb6 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -238,10 +238,7 @@
*/
u32 get_device_type(void)
{
- struct omap_sys_ctrl_regs *ctrl =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
- return (readl(&ctrl->control_status) &
+ return (readl((*ctrl)->control_status) &
(DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT;
}
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 18efa6c..892d016 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -39,6 +39,8 @@
(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL;
/*
* The M & N values in the following tables are created using the
@@ -470,4 +472,5 @@
printf("\n INVALID OMAP REVISION ");
}
+ *ctrl = &omap4_ctrl;
}
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index f4123aa..2db517b 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -57,10 +57,6 @@
void do_io_settings(void)
{
u32 lpddr2io;
- struct control_lpddr2io_regs *lpddr2io_regs =
- (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
- struct omap_sys_ctrl_regs *const ctrl =
- (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
u32 omap4_rev = omap_revision();
@@ -72,20 +68,20 @@
lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
/* EMIF1 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io1_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io1_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+ (*ctrl)->control_lpddr2io1_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3);
/* EMIF2 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_0);
+ writel(lpddr2io, (*ctrl)->control_lpddr2io2_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io2_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+ (*ctrl)->control_lpddr2io2_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3);
/*
* Some of these settings (TRIM values) come from eFuse and are
@@ -93,16 +89,16 @@
* calibration of the device. Do the software over-ride only if
* the device is not correctly trimmed
*/
- if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+ if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) {
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_iva_voltage_ctrl);
+ (*ctrl)->control_ldosram_iva_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_mpu_voltage_ctrl);
+ (*ctrl)->control_ldosram_mpu_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_core_voltage_ctrl);
+ (*ctrl)->control_ldosram_core_voltage_ctrl);
}
/*
@@ -110,11 +106,11 @@
* i. unconditionally for all 4430
* ii. only if un-trimmed for 4460
*/
- if (!readl(&ctrl->control_efuse_1))
- writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+ if (!readl((*ctrl)->control_efuse_1))
+ writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1);
- if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2))
- writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+ if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2))
+ writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2);
}
#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 815b9d2..c58ce8d 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -293,3 +293,23 @@
.prm_vc_cfg_i2c_mode = 0x4a307ba8,
.prm_vc_cfg_i2c_clk = 0x4a307bac,
};
+
+struct omap_sys_ctrl_regs const omap4_ctrl = {
+ .control_id_code = 0x4A002204,
+ .control_std_fuse_opp_bgap = 0x4a002260,
+ .control_status = 0x4a0022c4,
+ .control_ldosram_iva_voltage_ctrl = 0x4A002320,
+ .control_ldosram_mpu_voltage_ctrl = 0x4A002324,
+ .control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_pbiaslite = 0x4A100600,
+ .control_lpddr2io1_0 = 0x4A100638,
+ .control_lpddr2io1_1 = 0x4A10063C,
+ .control_lpddr2io1_2 = 0x4A100640,
+ .control_lpddr2io1_3 = 0x4A100644,
+ .control_lpddr2io2_0 = 0x4A100648,
+ .control_lpddr2io2_1 = 0x4A10064C,
+ .control_lpddr2io2_2 = 0x4A100650,
+ .control_lpddr2io2_3 = 0x4A100654,
+ .control_efuse_1 = 0x4A100700,
+ .control_efuse_2 = 0x4A100704,
+};
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 13e618d..320d5bb 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -39,6 +39,8 @@
(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
struct vcores_data const **omap_vcores =
(struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
+struct omap_sys_ctrl_regs const **ctrl =
+ (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL;
static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
{125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
@@ -433,4 +435,6 @@
default:
printf("\n INVALID OMAP REVISION ");
}
+
+ *ctrl = &omap5_ctrl;
}
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index 4def422..1863c69 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -56,76 +56,71 @@
/* LPDDR2 specific IO settings */
static void io_settings_lpddr2(void)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_0));
+ (*ctrl)->control_ddrch1_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch1_1));
+ (*ctrl)->control_ddrch1_1);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_0));
+ (*ctrl)->control_ddrch2_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
- &(ioregs_base->control_ddrch2_1));
+ (*ctrl)->control_ddrch2_1);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_0));
+ (*ctrl)->control_lpddr2ch1_0);
writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
- &(ioregs_base->control_lpddr2ch1_1));
+ (*ctrl)->control_lpddr2ch1_1);
writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
- &(ioregs_base->control_ddrio_0));
+ (*ctrl)->control_ddrio_0);
writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
- &(ioregs_base->control_ddrio_1));
+ (*ctrl)->control_ddrio_1);
writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
- &(ioregs_base->control_ddrio_2));
+ (*ctrl)->control_ddrio_2);
}
/* DDR3 specific IO settings */
static void io_settings_ddr3(void)
{
u32 io_settings = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch1_0));
+ (*ctrl)->control_ddr3ch1_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_0));
+ (*ctrl)->control_ddrch1_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch1_1));
+ (*ctrl)->control_ddrch1_1);
writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddr3ch2_0));
+ (*ctrl)->control_ddr3ch2_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_0));
+ (*ctrl)->control_ddrch2_0);
writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
- &(ioregs_base->control_ddrch2_1));
+ (*ctrl)->control_ddrch2_1);
writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_0));
+ (*ctrl)->control_ddrio_0);
writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_1));
+ (*ctrl)->control_ddrio_1);
writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE,
- &(ioregs_base->control_ddrio_2));
+ (*ctrl)->control_ddrio_2);
/* omap5432 does not use lpddr2 */
- writel(0x0, &(ioregs_base->control_lpddr2ch1_0));
- writel(0x0, &(ioregs_base->control_lpddr2ch1_1));
+ writel(0x0, (*ctrl)->control_lpddr2ch1_0);
+ writel(0x0, (*ctrl)->control_lpddr2ch1_1);
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
+ (*ctrl)->control_emif1_sdram_config_ext);
writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ (*ctrl)->control_emif2_sdram_config_ext);
/* Disable DLL select */
- io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif1_sdram_config));
+ (*ctrl)->control_port_emif1_sdram_config);
- io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config))
+ io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
& 0xFFEFFFFF);
writel(io_settings,
- &(ioregs_base->control_port_emif2_sdram_config));
+ (*ctrl)->control_port_emif2_sdram_config);
}
/*
@@ -134,62 +129,60 @@
void do_io_settings(void)
{
u32 io_settings = 0, mask = 0;
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
/* Impedance settings EMMC, C2C 1,2, hsi2 */
mask = (ds_mask << 2) | (ds_mask << 8) |
(ds_mask << 16) | (ds_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_0) &
(~mask);
io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) |
(ds_45_ohm << 18) | (ds_60_ohm << 2);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_0);
/* Impedance settings Mcspi2 */
mask = (ds_mask << 30);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 30);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_1);
/* Impedance settings C2C 3,4 */
mask = (ds_mask << 14) | (ds_mask << 16);
- io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart1io_padconf_2) &
(~mask);
io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16);
- writel(io_settings, &(ioregs_base->control_smart1io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart1io_padconf_2);
/* Slew rate settings EMMC, C2C 1,2 */
mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_0) &
(~mask);
io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_0));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_0);
/* Slew rate settings hsi2, Mcspi2 */
mask = (sc_mask << 24) | (sc_mask << 28);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_1) &
(~mask);
io_settings |= (sc_fast << 28) | (sc_fast << 24);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_1);
/* Slew rate settings C2C 3,4 */
mask = (sc_mask << 16) | (sc_mask << 18);
- io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) &
+ io_settings = readl((*ctrl)->control_smart2io_padconf_2) &
(~mask);
io_settings |= (sc_na << 16) | (sc_na << 18);
- writel(io_settings, &(ioregs_base->control_smart2io_padconf_2));
+ writel(io_settings, (*ctrl)->control_smart2io_padconf_2);
/* impedance and slew rate settings for usb */
mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) |
(usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14);
- io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) &
+ io_settings = readl((*ctrl)->control_smart3io_padconf_1) &
(~mask);
io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) |
(ds_60_ohm << 23) | (sc_fast << 20) |
(sc_fast << 17) | (sc_fast << 14);
- writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
+ writel(io_settings, (*ctrl)->control_smart3io_padconf_1);
if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
io_settings_lpddr2();
@@ -197,25 +190,22 @@
io_settings_ddr3();
/* Efuse settings */
- writel(EFUSE_1, &(ioregs_base->control_efuse_1));
- writel(EFUSE_2, &(ioregs_base->control_efuse_2));
- writel(EFUSE_3, &(ioregs_base->control_efuse_3));
- writel(EFUSE_4, &(ioregs_base->control_efuse_4));
+ writel(EFUSE_1, (*ctrl)->control_efuse_1);
+ writel(EFUSE_2, (*ctrl)->control_efuse_2);
+ writel(EFUSE_3, (*ctrl)->control_efuse_3);
+ writel(EFUSE_4, (*ctrl)->control_efuse_4);
}
#endif
void config_data_eye_leveling_samples(u32 emif_base)
{
- struct omap_sys_ctrl_regs *ioregs_base =
- (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
-
/*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/
if (emif_base == EMIF1_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif1_sdram_config_ext));
+ (*ctrl)->control_emif1_sdram_config_ext);
else if (emif_base == EMIF2_BASE)
writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
- &(ioregs_base->control_emif2_sdram_config_ext));
+ (*ctrl)->control_emif2_sdram_config_ext);
}
void init_omap_revision(void)
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index cdc4864..0f58b2f 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -304,3 +304,77 @@
.prm_sldo_mm_setup = 0x4ae07bd4,
.prm_sldo_mm_ctrl = 0x4ae07bd8,
};
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+ .control_status = 0x4A002134,
+ .control_paconf_global = 0x4A002DA0,
+ .control_paconf_mode = 0x4A002DA4,
+ .control_smart1io_padconf_0 = 0x4A002DA8,
+ .control_smart1io_padconf_1 = 0x4A002DAC,
+ .control_smart1io_padconf_2 = 0x4A002DB0,
+ .control_smart2io_padconf_0 = 0x4A002DB4,
+ .control_smart2io_padconf_1 = 0x4A002DB8,
+ .control_smart2io_padconf_2 = 0x4A002DBC,
+ .control_smart3io_padconf_0 = 0x4A002DC0,
+ .control_smart3io_padconf_1 = 0x4A002DC4,
+ .control_pbias = 0x4A002E00,
+ .control_i2c_0 = 0x4A002E04,
+ .control_camera_rx = 0x4A002E08,
+ .control_hdmi_tx_phy = 0x4A002E0C,
+ .control_uniportm = 0x4A002E10,
+ .control_dsiphy = 0x4A002E14,
+ .control_mcbsplp = 0x4A002E18,
+ .control_usb2phycore = 0x4A002E1C,
+ .control_hdmi_1 = 0x4A002E20,
+ .control_hsi = 0x4A002E24,
+ .control_ddr3ch1_0 = 0x4A002E30,
+ .control_ddr3ch2_0 = 0x4A002E34,
+ .control_ddrch1_0 = 0x4A002E38,
+ .control_ddrch1_1 = 0x4A002E3C,
+ .control_ddrch2_0 = 0x4A002E40,
+ .control_ddrch2_1 = 0x4A002E44,
+ .control_lpddr2ch1_0 = 0x4A002E48,
+ .control_lpddr2ch1_1 = 0x4A002E4C,
+ .control_ddrio_0 = 0x4A002E50,
+ .control_ddrio_1 = 0x4A002E54,
+ .control_ddrio_2 = 0x4A002E58,
+ .control_hyst_1 = 0x4A002E5C,
+ .control_usbb_hsic_control = 0x4A002E60,
+ .control_c2c = 0x4A002E64,
+ .control_core_control_spare_rw = 0x4A002E68,
+ .control_core_control_spare_r = 0x4A002E6C,
+ .control_core_control_spare_r_c0 = 0x4A002E70,
+ .control_srcomp_north_side = 0x4A002E74,
+ .control_srcomp_south_side = 0x4A002E78,
+ .control_srcomp_east_side = 0x4A002E7C,
+ .control_srcomp_west_side = 0x4A002E80,
+ .control_srcomp_code_latch = 0x4A002E84,
+ .control_port_emif1_sdram_config = 0x4AE0C110,
+ .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
+ .control_port_emif2_sdram_config = 0x4AE0C118,
+ .control_emif1_sdram_config_ext = 0x4AE0C144,
+ .control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
+ .control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
+ .control_padconf_mode = 0x4AE0CDA8,
+ .control_xtal_oscillator = 0x4AE0CDAC,
+ .control_i2c_2 = 0x4AE0CDB0,
+ .control_ckobuffer = 0x4AE0CDB4,
+ .control_wkup_control_spare_rw = 0x4AE0CDB8,
+ .control_wkup_control_spare_r = 0x4AE0CDBC,
+ .control_wkup_control_spare_r_c0 = 0x4AE0CDC0,
+ .control_srcomp_east_side_wkup = 0x4AE0CDC4,
+ .control_efuse_1 = 0x4AE0CDC8,
+ .control_efuse_2 = 0x4AE0CDCC,
+ .control_efuse_3 = 0x4AE0CDD0,
+ .control_efuse_4 = 0x4AE0CDD4,
+ .control_efuse_5 = 0x4AE0CDD8,
+ .control_efuse_6 = 0x4AE0CDDC,
+ .control_efuse_7 = 0x4AE0CDE0,
+ .control_efuse_8 = 0x4AE0CDE4,
+ .control_efuse_9 = 0x4AE0CDE8,
+ .control_efuse_10 = 0x4AE0CDEC,
+ .control_efuse_11 = 0x4AE0CDF0,
+ .control_efuse_12 = 0x4AE0CDF4,
+ .control_efuse_13 = 0x4AE0CDF8,
+};
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 73edd9d..5f321fe 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -132,34 +132,6 @@
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- unsigned int pad1[129];
- unsigned int control_id_code; /* 0x4A002204 */
- unsigned int pad11[22];
- unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */
- unsigned int pad2[24]; /* 0x4a002264 */
- unsigned int control_status; /* 0x4a0022c4 */
- unsigned int pad3[22]; /* 0x4a0022c8 */
- unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
- unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
- unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
- unsigned int pad4[260277];
- unsigned int control_pbiaslite; /* 0x4A100600 */
- unsigned int pad5[63];
- unsigned int control_efuse_1; /* 0x4A100700 */
- unsigned int control_efuse_2; /* 0x4A100704 */
-};
-
-struct control_lpddr2io_regs {
- unsigned int control_lpddr2io1_0;
- unsigned int control_lpddr2io1_1;
- unsigned int control_lpddr2io1_2;
- unsigned int control_lpddr2io1_3;
- unsigned int control_lpddr2io2_0;
- unsigned int control_lpddr2io2_1;
- unsigned int control_lpddr2io2_2;
- unsigned int control_lpddr2io2_3;
-};
#endif /* __ASSEMBLY__ */
/*
@@ -181,7 +153,8 @@
#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* ROM code defines */
/* Boot device */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 4bf555a..a91da7d 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -131,87 +131,6 @@
#define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT)
#define DEVICE_GP 0x3
-struct omap_sys_ctrl_regs {
- u32 pad0[77]; /* 0x4A002000 */
- u32 control_status; /* 0x4A002134 */
- u32 pad1[794]; /* 0x4A002138 */
- u32 control_paconf_global; /* 0x4A002DA0 */
- u32 control_paconf_mode; /* 0x4A002DA4 */
- u32 control_smart1io_padconf_0; /* 0x4A002DA8 */
- u32 control_smart1io_padconf_1; /* 0x4A002DAC */
- u32 control_smart1io_padconf_2; /* 0x4A002DB0 */
- u32 control_smart2io_padconf_0; /* 0x4A002DB4 */
- u32 control_smart2io_padconf_1; /* 0x4A002DB8 */
- u32 control_smart2io_padconf_2; /* 0x4A002DBC */
- u32 control_smart3io_padconf_0; /* 0x4A002DC0 */
- u32 control_smart3io_padconf_1; /* 0x4A002DC4 */
- u32 pad2[14];
- u32 control_pbias; /* 0x4A002E00 */
- u32 control_i2c_0; /* 0x4A002E04 */
- u32 control_camera_rx; /* 0x4A002E08 */
- u32 control_hdmi_tx_phy; /* 0x4A002E0C */
- u32 control_uniportm; /* 0x4A002E10 */
- u32 control_dsiphy; /* 0x4A002E14 */
- u32 control_mcbsplp; /* 0x4A002E18 */
- u32 control_usb2phycore; /* 0x4A002E1C */
- u32 control_hdmi_1; /*0x4A002E20*/
- u32 control_hsi; /*0x4A002E24*/
- u32 pad3[2];
- u32 control_ddr3ch1_0; /*0x4A002E30*/
- u32 control_ddr3ch2_0; /*0x4A002E34*/
- u32 control_ddrch1_0; /*0x4A002E38*/
- u32 control_ddrch1_1; /*0x4A002E3C*/
- u32 control_ddrch2_0; /*0x4A002E40*/
- u32 control_ddrch2_1; /*0x4A002E44*/
- u32 control_lpddr2ch1_0; /*0x4A002E48*/
- u32 control_lpddr2ch1_1; /*0x4A002E4C*/
- u32 control_ddrio_0; /*0x4A002E50*/
- u32 control_ddrio_1; /*0x4A002E54*/
- u32 control_ddrio_2; /*0x4A002E58*/
- u32 control_hyst_1; /*0x4A002E5C*/
- u32 control_usbb_hsic_control; /*0x4A002E60*/
- u32 control_c2c; /*0x4A002E64*/
- u32 control_core_control_spare_rw; /*0x4A002E68*/
- u32 control_core_control_spare_r; /*0x4A002E6C*/
- u32 control_core_control_spare_r_c0; /*0x4A002E70*/
- u32 control_srcomp_north_side; /*0x4A002E74*/
- u32 control_srcomp_south_side; /*0x4A002E78*/
- u32 control_srcomp_east_side; /*0x4A002E7C*/
- u32 control_srcomp_west_side; /*0x4A002E80*/
- u32 control_srcomp_code_latch; /*0x4A002E84*/
- u32 pad4[3679394];
- u32 control_port_emif1_sdram_config; /*0x4AE0C110*/
- u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/
- u32 control_port_emif2_sdram_config; /*0x4AE0C118*/
- u32 pad5[10];
- u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */
- u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */
- u32 pad6[789];
- u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */
- u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */
- u32 control_padconf_mode; /* 0x4AE0CDA8 */
- u32 control_xtal_oscillator; /* 0x4AE0CDAC */
- u32 control_i2c_2; /* 0x4AE0CDB0 */
- u32 control_ckobuffer; /* 0x4AE0CDB4 */
- u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */
- u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */
- u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */
- u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */
- u32 control_efuse_1; /* 0x4AE0CDC8 */
- u32 control_efuse_2; /* 0x4AE0CDCC */
- u32 control_efuse_3; /* 0x4AE0CDD0 */
- u32 control_efuse_4; /* 0x4AE0CDD4 */
- u32 control_efuse_5; /* 0x4AE0CDD8 */
- u32 control_efuse_6; /* 0x4AE0CDDC */
- u32 control_efuse_7; /* 0x4AE0CDE0 */
- u32 control_efuse_8; /* 0x4AE0CDE4 */
- u32 control_efuse_9; /* 0x4AE0CDE8 */
- u32 control_efuse_10; /* 0x4AE0CDEC */
- u32 control_efuse_11; /* 0x4AE0CDF0 */
- u32 control_efuse_12; /* 0x4AE0CDF4 */
- u32 control_efuse_13; /* 0x4AE0CDF8 */
-};
-
/* Output impedance control */
#define ds_120_ohm 0x0
#define ds_60_ohm 0x1
@@ -274,7 +193,8 @@
#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14)
#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18)
#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C)
-#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20)
+#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24)
/* Silicon revisions */
#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index eee6893..2115687 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -326,6 +326,94 @@
u32 prm_vc_cfg_channel;
};
+struct omap_sys_ctrl_regs {
+ u32 control_status;
+ u32 control_id_code;
+ u32 control_std_fuse_opp_bgap;
+ u32 control_ldosram_iva_voltage_ctrl;
+ u32 control_ldosram_mpu_voltage_ctrl;
+ u32 control_ldosram_core_voltage_ctrl;
+ u32 control_paconf_global;
+ u32 control_paconf_mode;
+ u32 control_smart1io_padconf_0;
+ u32 control_smart1io_padconf_1;
+ u32 control_smart1io_padconf_2;
+ u32 control_smart2io_padconf_0;
+ u32 control_smart2io_padconf_1;
+ u32 control_smart2io_padconf_2;
+ u32 control_smart3io_padconf_0;
+ u32 control_smart3io_padconf_1;
+ u32 control_pbias;
+ u32 control_i2c_0;
+ u32 control_camera_rx;
+ u32 control_hdmi_tx_phy;
+ u32 control_uniportm;
+ u32 control_dsiphy;
+ u32 control_mcbsplp;
+ u32 control_usb2phycore;
+ u32 control_hdmi_1;
+ u32 control_hsi;
+ u32 control_ddr3ch1_0;
+ u32 control_ddr3ch2_0;
+ u32 control_ddrch1_0;
+ u32 control_ddrch1_1;
+ u32 control_ddrch2_0;
+ u32 control_ddrch2_1;
+ u32 control_lpddr2ch1_0;
+ u32 control_lpddr2ch1_1;
+ u32 control_ddrio_0;
+ u32 control_ddrio_1;
+ u32 control_ddrio_2;
+ u32 control_lpddr2io1_0;
+ u32 control_lpddr2io1_1;
+ u32 control_lpddr2io1_2;
+ u32 control_lpddr2io1_3;
+ u32 control_lpddr2io2_0;
+ u32 control_lpddr2io2_1;
+ u32 control_lpddr2io2_2;
+ u32 control_lpddr2io2_3;
+ u32 control_hyst_1;
+ u32 control_usbb_hsic_control;
+ u32 control_c2c;
+ u32 control_core_control_spare_rw;
+ u32 control_core_control_spare_r;
+ u32 control_core_control_spare_r_c0;
+ u32 control_srcomp_north_side;
+ u32 control_srcomp_south_side;
+ u32 control_srcomp_east_side;
+ u32 control_srcomp_west_side;
+ u32 control_srcomp_code_latch;
+ u32 control_pbiaslite;
+ u32 control_port_emif1_sdram_config;
+ u32 control_port_emif1_lpddr2_nvm_config;
+ u32 control_port_emif2_sdram_config;
+ u32 control_emif1_sdram_config_ext;
+ u32 control_emif2_sdram_config_ext;
+ u32 control_smart1nopmio_padconf_0;
+ u32 control_smart1nopmio_padconf_1;
+ u32 control_padconf_mode;
+ u32 control_xtal_oscillator;
+ u32 control_i2c_2;
+ u32 control_ckobuffer;
+ u32 control_wkup_control_spare_rw;
+ u32 control_wkup_control_spare_r;
+ u32 control_wkup_control_spare_r_c0;
+ u32 control_srcomp_east_side_wkup;
+ u32 control_efuse_1;
+ u32 control_efuse_2;
+ u32 control_efuse_3;
+ u32 control_efuse_4;
+ u32 control_efuse_5;
+ u32 control_efuse_6;
+ u32 control_efuse_7;
+ u32 control_efuse_8;
+ u32 control_efuse_9;
+ u32 control_efuse_10;
+ u32 control_efuse_11;
+ u32 control_efuse_12;
+ u32 control_efuse_13;
+};
+
struct dpll_params {
u32 m;
u32 n;
@@ -390,6 +478,9 @@
extern struct dplls const **dplls_data;
extern struct vcores_data const **omap_vcores;
extern const u32 sys_clk_array[8];
+extern struct omap_sys_ctrl_regs const **ctrl;
+extern struct omap_sys_ctrl_regs const omap4_ctrl;
+extern struct omap_sys_ctrl_regs const omap5_ctrl;
void hw_data_init(void);