configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode
For USB DFU boot mode there is a limitation on the load address of boot
images that they have to be less than 0x70001000. Therefore, move the
SPL_TEXT_BASE address to 0x70000000.
Currently ATF is being loaded at 0x70000000, if the SPL is being loaded at
0x70000000 then ATF would overwrite SPL image when loaded. Therefore, move
the location of ATF to a latter location in SRAM, past the SPL image. Also
rearrange the EEPROM and BSS data on top of ATF.
Given below is the placement of various data sections in SRAM
┌──────────────────────────────────────┐0x70000000
│ │
│ │
│ │
│ SPL IMAGE (Max size 1.5 MB) │
│ │
│ │
│ │
├──────────────────────────────────────┤0x7017FFFF
│ │
│ SPL STACK │
│ │
├──────────────────────────────────────┤0x70192727
│ GLOBAL DATA(216 B) │
├──────────────────────────────────────┤0x701927FF
│ │
│ INITIAL HEAP (32 KB) │
│ │
├──────────────────────────────────────┤0x7019A7FF
│ │
│ BSS (20 KB) │
├──────────────────────────────────────┤0x7019F7FF
│ EEPROM DATA (2 KB) │
├──────────────────────────────────────┤0x7019FFFF
│ │
│ │
│ ATF (123 KB) │
│ │
│ │
├──────────────────────────────────────┤0x701BEBFB
│ BOOT PARAMETER INDEX TABLE (5124 B)│
├──────────────────────────────────────┤0x701BFFFF
│ │
│SYSFW FIREWALLED DUE TO A BUG (128 KB)│
│ │
├──────────────────────────────────────┤0x701DFFFF
│ │
│ DMSC CODE AREA (128 KB) │
│ │
└──────────────────────────────────────┘0x701FFFFF
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210604163043.12811-9-a-govindraju@ti.com
diff --git a/arch/arm/mach-k3/include/mach/am64_hardware.h b/arch/arm/mach-k3/include/mach/am64_hardware.h
index 4ee41ad..9638343 100644
--- a/arch/arm/mach-k3/include/mach/am64_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am64_hardware.h
@@ -7,8 +7,6 @@
#ifndef __ASM_ARCH_AM64_HARDWARE_H
#define __ASM_ARCH_AM64_HARDWARE_H
-#include <config.h>
-
#define CTRL_MMR0_BASE 0x43000000
#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
@@ -54,7 +52,7 @@
#define ROM_ENTENDED_BOOT_DATA_INFO 0x701beb00
-/* Use Last 1K as Scratch pad */
-#define TI_SRAM_SCRATCH_BOARD_EEPROM_START 0x701bfc00
+/* Use Last 2K as Scratch pad */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START 0x7019f800
#endif /* __ASM_ARCH_DRA8_HARDWARE_H */
diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig
index 249b0db..8894ac1 100644
--- a/configs/am64x_evm_a53_defconfig
+++ b/configs/am64x_evm_a53_defconfig
@@ -5,6 +5,7 @@
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_NR_DRAM_BANKS=2
CONFIG_SOC_K3_AM642=y
+CONFIG_K3_ATF_LOAD_ADDR=0x701a0000
CONFIG_TARGET_AM642_A53_EVM=y
CONFIG_ENV_SIZE=0x20000
CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig
index 2810fa1..de0c814 100644
--- a/configs/am64x_evm_r5_defconfig
+++ b/configs/am64x_evm_r5_defconfig
@@ -10,7 +10,7 @@
CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
-CONFIG_SPL_TEXT_BASE=0x70020000
+CONFIG_SPL_TEXT_BASE=0x70000000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
index 7c30e50..7c9bdc2 100644
--- a/include/configs/am64x_evm.h
+++ b/include/configs/am64x_evm.h
@@ -12,6 +12,7 @@
#include <linux/sizes.h>
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
+#include <asm/arch/am64_hardware.h>
/* DDR Configuration */
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
@@ -43,7 +44,7 @@
* location filled in by the boot ROM that we want to read out without any
* interference from the C context.
*/
-#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
+#define CONFIG_SPL_BSS_START_ADDR (TI_SRAM_SCRATCH_BOARD_EEPROM_START -\
CONFIG_SPL_BSS_MAX_SIZE)
/* Set the stack right below the SPL BSS section */
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR