Tegra: Configure L2 cache control reg properly.
Without this change, kernel fails at calling function cache_clean_flush
during kernel early boot.
Aprocryphally, intended for T114 only, so I check for a T114 SoC.
Works (i.e. dalmore 3.8 kernel now starts printing to console).
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/cpu/tegra-common/cache.c b/arch/arm/cpu/tegra-common/cache.c
new file mode 100644
index 0000000..48e9319
--- /dev/null
+++ b/arch/arm/cpu/tegra-common/cache.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra cache routines */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-tegra/ap.h>
+#include <asm/arch/gp_padctrl.h>
+
+void config_cache(void)
+{
+ struct apb_misc_gp_ctlr *gp =
+ (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
+ u32 reg = 0;
+
+ /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #0x41\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+
+ /* Currently, only T114 needs this L2 cache change to boot Linux */
+ reg = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK);
+ if (reg != (CHIPID_TEGRA114 << HIDREV_CHIPID_SHIFT))
+ return;
+ /*
+ * Systems with an architectural L2 cache must not use the PL310.
+ * Config L2CTLR here for a data RAM latency of 3 cycles.
+ */
+ asm("mrc p15, 1, %0, c9, c0, 2" : : "r" (reg));
+ reg &= ~7;
+ reg |= 2;
+ asm("mcr p15, 1, %0, c9, c0, 2" : : "r" (reg));
+}