arm64: dts: rockchip: add stdout path on Qnap-TS433
As most Rockchip boards do, the TS433 also uses uart2 for its serial
output. Set the correct chosen entry for it.
Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-6-heiko@sntech.de
[ upstream commit: e1cb5d8a92e41171bf4d5ddc459bd96372500901 ]
(cherry picked from commit 1e1af2af2192490a3d174624ac1bb976aa6afffa)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index da735c4..be1c228 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -13,6 +13,10 @@
model = "Qnap TS-433-4G NAS System 4-Bay";
compatible = "qnap,ts433", "rockchip,rk3568";
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
dc_12v: regulator-dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";