diff --git a/drivers/adc/adc-uclass.c b/drivers/adc/adc-uclass.c
index a5ef722..a4c20f4 100644
--- a/drivers/adc/adc-uclass.c
+++ b/drivers/adc/adc-uclass.c
@@ -64,7 +64,7 @@
 	}
 
 	if (ret)
-		error("%s: can't enable %s-supply!", dev->name, supply_type);
+		pr_err("%s: can't enable %s-supply!", dev->name, supply_type);
 
 	return ret;
 }
@@ -389,12 +389,12 @@
 	/* Set ADC VDD platdata: polarity, uV, regulator (phandle). */
 	ret = adc_vdd_platdata_set(dev);
 	if (ret)
-		error("%s: Can't update Vdd. Error: %d", dev->name, ret);
+		pr_err("%s: Can't update Vdd. Error: %d", dev->name, ret);
 
 	/* Set ADC VSS platdata: polarity, uV, regulator (phandle). */
 	ret = adc_vss_platdata_set(dev);
 	if (ret)
-		error("%s: Can't update Vss. Error: %d", dev->name, ret);
+		pr_err("%s: Can't update Vss. Error: %d", dev->name, ret);
 
 	return 0;
 }
diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c
index 324d72f..3bb065d 100644
--- a/drivers/adc/exynos-adc.c
+++ b/drivers/adc/exynos-adc.c
@@ -22,7 +22,7 @@
 	struct exynos_adc_v2 *regs = priv->regs;
 
 	if (channel != priv->active_channel) {
-		error("Requested channel is not active!");
+		pr_err("Requested channel is not active!");
 		return -EINVAL;
 	}
 
@@ -80,7 +80,7 @@
 
 	/* Check HW version */
 	if (readl(&regs->version) != ADC_V2_VERSION) {
-		error("This driver supports only ADC v2!");
+		pr_err("This driver supports only ADC v2!");
 		return -ENXIO;
 	}
 
@@ -109,7 +109,7 @@
 
 	priv->regs = (struct exynos_adc_v2 *)devfdt_get_addr(dev);
 	if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) {
-		error("Dev: %s - can't get address!", dev->name);
+		pr_err("Dev: %s - can't get address!", dev->name);
 		return -ENODATA;
 	}
 
diff --git a/drivers/adc/rockchip-saradc.c b/drivers/adc/rockchip-saradc.c
index 0e6271d..a2856db 100644
--- a/drivers/adc/rockchip-saradc.c
+++ b/drivers/adc/rockchip-saradc.c
@@ -46,7 +46,7 @@
 	struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev);
 
 	if (channel != priv->active_channel) {
-		error("Requested channel is not active!");
+		pr_err("Requested channel is not active!");
 		return -EINVAL;
 	}
 
@@ -69,7 +69,7 @@
 	struct rockchip_saradc_priv *priv = dev_get_priv(dev);
 
 	if (channel < 0 || channel >= priv->data->num_channels) {
-		error("Requested channel is invalid!");
+		pr_err("Requested channel is invalid!");
 		return -EINVAL;
 	}
 
@@ -125,7 +125,7 @@
 	data = (struct rockchip_saradc_data *)dev_get_driver_data(dev);
 	priv->regs = (struct rockchip_saradc_regs *)dev_read_addr(dev);
 	if (priv->regs == (struct rockchip_saradc_regs *)FDT_ADDR_T_NONE) {
-		error("Dev: %s - can't get address!", dev->name);
+		pr_err("Dev: %s - can't get address!", dev->name);
 		return -ENODATA;
 	}
 
diff --git a/drivers/adc/sandbox.c b/drivers/adc/sandbox.c
index 3718922..80e8e37 100644
--- a/drivers/adc/sandbox.c
+++ b/drivers/adc/sandbox.c
@@ -61,7 +61,7 @@
 	/* For single-channel conversion mode, check if channel was selected */
 	if ((priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) &&
 	    !(priv->active_channel_mask & (1 << channel))) {
-		error("Request for an inactive channel!");
+		pr_err("Request for an inactive channel!");
 		return -EINVAL;
 	}
 
@@ -82,12 +82,12 @@
 
 	/* Return error for single-channel conversion mode */
 	if (priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) {
-		error("ADC in single-channel mode!");
+		pr_err("ADC in single-channel mode!");
 		return -EPERM;
 	}
 	/* Check channel selection */
 	if (!(priv->active_channel_mask & channel_mask)) {
-		error("Request for an inactive channel!");
+		pr_err("Request for an inactive channel!");
 		return -EINVAL;
 	}
 	/* The conversion must be started before reading the data */
diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
index f614798..b16304b 100644
--- a/drivers/ata/dwc_ahci.c
+++ b/drivers/ata/dwc_ahci.c
@@ -58,19 +58,19 @@
 
 	ret = generic_phy_get_by_name(dev, "sata-phy", &phy);
 	if (ret) {
-		error("can't get the phy from DT\n");
+		pr_err("can't get the phy from DT\n");
 		return ret;
 	}
 
 	ret = generic_phy_init(&phy);
 	if (ret) {
-		error("unable to initialize the sata phy\n");
+		pr_err("unable to initialize the sata phy\n");
 		return ret;
 	}
 
 	ret = generic_phy_power_on(&phy);
 	if (ret) {
-		error("unable to power on the sata phy\n");
+		pr_err("unable to power on the sata phy\n");
 		return ret;
 	}
 
diff --git a/drivers/clk/clk_boston.c b/drivers/clk/clk_boston.c
index 78f1b75..5c05e3d 100644
--- a/drivers/clk/clk_boston.c
+++ b/drivers/clk/clk_boston.c
@@ -67,13 +67,13 @@
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   "regmap", &syscon);
 	if (err) {
-		error("unable to find syscon device\n");
+		pr_err("unable to find syscon device\n");
 		return err;
 	}
 
 	state->regmap = syscon_get_regmap(syscon);
 	if (!state->regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/clk/clk_stm32f7.c b/drivers/clk/clk_stm32f7.c
index 68d6ba0..96a06b8 100644
--- a/drivers/clk/clk_stm32f7.c
+++ b/drivers/clk/clk_stm32f7.c
@@ -224,7 +224,7 @@
 		return sysclk >>= shift;
 		break;
 	default:
-		error("clock index %ld out of range\n", clk->id);
+		pr_err("clock index %ld out of range\n", clk->id);
 		return -EINVAL;
 		break;
 	}
diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c
index fd0e3ab..931e5ef 100644
--- a/drivers/clk/clk_stm32h7.c
+++ b/drivers/clk/clk_stm32h7.c
@@ -472,13 +472,13 @@
 	clk.id = 0;
 	ret = uclass_get_device_by_name(UCLASS_CLK, name, &fixed_clock_dev);
 	if (ret) {
-		error("Can't find clk %s (%d)", name, ret);
+		pr_err("Can't find clk %s (%d)", name, ret);
 		return 0;
 	}
 
 	ret = clk_request(fixed_clock_dev, &clk);
 	if (ret) {
-		error("Can't request %s clk (%d)", name, ret);
+		pr_err("Can't request %s clk (%d)", name, ret);
 		return 0;
 	}
 
@@ -518,7 +518,7 @@
 		break;
 	case RCC_PLLCKSELR_PLLSRC_NO_CLK:
 		/* shouldn't happen */
-		error("wrong value for RCC_PLLCKSELR register\n");
+		pr_err("wrong value for RCC_PLLCKSELR register\n");
 		pllsrc = 0;
 		break;
 	}
@@ -695,7 +695,7 @@
 		break;
 
 	default:
-		error("unexpected gate_offset value (0x%x)\n", gate_offset);
+		pr_err("unexpected gate_offset value (0x%x)\n", gate_offset);
 		return -EINVAL;
 		break;
 	}
@@ -739,13 +739,13 @@
 					   "st,syscfg", &syscon);
 
 	if (err) {
-		error("unable to find syscon device\n");
+		pr_err("unable to find syscon device\n");
 		return err;
 	}
 
 	priv->pwr_regmap = syscon_get_regmap(syscon);
 	if (!priv->pwr_regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index 3a12be7..3661769 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -302,7 +302,7 @@
 		dpll_cfg = &dpll_1600;
 		break;
 	default:
-		error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+		pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
 	}
 	rkclk_set_pll(cru, DPLL, dpll_cfg);
 
@@ -360,7 +360,7 @@
 		break;
 
 	default:
-		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+		pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 		return -EINVAL;
 	}
 
@@ -385,7 +385,7 @@
 		break;
 
 	default:
-		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+		pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 		return -EINVAL;
 	}
 
@@ -530,7 +530,7 @@
 	/* The reset driver does not have a device node, so bind it here */
 	ret = device_bind_driver(gd->dm_root, "rk3368_sysreset", "reset", &dev);
 	if (ret)
-		error("bind RK3368 reset driver failed: ret=%d\n", ret);
+		pr_err("bind RK3368 reset driver failed: ret=%d\n", ret);
 
 	return ret;
 }
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 50faf5d..f45bba4 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -663,7 +663,7 @@
 		break;
 
 	default:
-		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+		pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 		return -EINVAL;
 	}
 
@@ -687,7 +687,7 @@
 		break;
 
 	default:
-		error("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
+		pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
 		return -EINVAL;
 	}
 
@@ -856,7 +856,7 @@
 		{.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
 		break;
 	default:
-		error("Unsupported SDRAM frequency!,%ld\n", set_rate);
+		pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
 	}
 	rkclk_set_pll(&cru->dpll_con[0], &dpll_cfg);
 
diff --git a/drivers/clk/rockchip/clk_rv1108.c b/drivers/clk/rockchip/clk_rv1108.c
index 86e73e4..55741c3 100644
--- a/drivers/clk/rockchip/clk_rv1108.c
+++ b/drivers/clk/rockchip/clk_rv1108.c
@@ -227,7 +227,7 @@
 	/* The reset driver does not have a device node, so bind it here */
 	ret = device_bind_driver(gd->dm_root, "rv1108_sysreset", "reset", &dev);
 	if (ret)
-		error("No Rv1108 reset driver: ret=%d\n", ret);
+		pr_err("No Rv1108 reset driver: ret=%d\n", ret);
 
 	return 0;
 }
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index ff732ac..2c22b62 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -64,14 +64,14 @@
 #endif
 	str_env = env_get("dfu_alt_info");
 	if (!str_env) {
-		error("\"dfu_alt_info\" env variable not defined!\n");
+		pr_err("\"dfu_alt_info\" env variable not defined!\n");
 		return -EINVAL;
 	}
 
 	env_bkp = strdup(str_env);
 	ret = dfu_config_entities(env_bkp, interface, devstr);
 	if (ret) {
-		error("DFU entities configuration failed!\n");
+		pr_err("DFU entities configuration failed!\n");
 		return ret;
 	}
 
@@ -132,7 +132,7 @@
 		return s;
 	}
 
-	error("DFU hash method: %s not supported!\n", s);
+	pr_err("DFU hash method: %s not supported!\n", s);
 	return NULL;
 }
 
@@ -273,7 +273,7 @@
 
 	/* we should be in buffer now (if not then size too large) */
 	if ((dfu->i_buf + size) > dfu->i_buf_end) {
-		error("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
+		pr_err("Buffer overflow! (0x%p + 0x%x > 0x%p)\n", dfu->i_buf,
 		      size, dfu->i_buf_end);
 		dfu_transaction_cleanup(dfu);
 		return -1;
@@ -451,7 +451,7 @@
 	if (s) {
 		ret = hash_lookup_algo(s, &dfu_hash_algo);
 		if (ret)
-			error("Hash algorithm %s not supported\n", s);
+			pr_err("Hash algorithm %s not supported\n", s);
 	}
 
 	dfu = calloc(sizeof(*dfu), dfu_alt_num);
@@ -576,7 +576,7 @@
 		      dp, left, write);
 		ret = dfu_write(dfu, dp, write, i);
 		if (ret) {
-			error("DFU write failed\n");
+			pr_err("DFU write failed\n");
 			return ret;
 		}
 
@@ -586,7 +586,7 @@
 
 	ret = dfu_flush(dfu, NULL, 0, i);
 	if (ret)
-		error("DFU flush failed!");
+		pr_err("DFU flush failed!");
 
 	return ret;
 }
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index 39e10b1..47948d3 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -29,7 +29,7 @@
 
 	mmc = find_mmc_device(dfu->data.mmc.dev_num);
 	if (!mmc) {
-		error("Device MMC %d - not found!", dfu->data.mmc.dev_num);
+		pr_err("Device MMC %d - not found!", dfu->data.mmc.dev_num);
 		return -ENODEV;
 	}
 
@@ -69,11 +69,11 @@
 			       buf);
 		break;
 	default:
-		error("Operation not supported\n");
+		pr_err("Operation not supported\n");
 	}
 
 	if (n != blk_count) {
-		error("MMC operation failed");
+		pr_err("MMC operation failed");
 		if (dfu->data.mmc.hw_partition >= 0)
 			blk_select_hwpart_devnum(IF_TYPE_MMC,
 						 dfu->data.mmc.dev_num,
@@ -312,7 +312,7 @@
 	for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
 		*parg = strsep(&s, " ");
 		if (*parg == NULL) {
-			error("Invalid number of arguments.\n");
+			pr_err("Invalid number of arguments.\n");
 			return -ENODEV;
 		}
 	}
@@ -327,13 +327,13 @@
 
 	mmc = find_mmc_device(dfu->data.mmc.dev_num);
 	if (mmc == NULL) {
-		error("Couldn't find MMC device no. %d.\n",
+		pr_err("Couldn't find MMC device no. %d.\n",
 		      dfu->data.mmc.dev_num);
 		return -ENODEV;
 	}
 
 	if (mmc_init(mmc)) {
-		error("Couldn't init MMC device.\n");
+		pr_err("Couldn't init MMC device.\n");
 		return -ENODEV;
 	}
 
@@ -360,7 +360,7 @@
 		int mmcpart = third_arg;
 
 		if (part_get_info(blk_dev, mmcpart, &partinfo) != 0) {
-			error("Couldn't find part #%d on mmc device #%d\n",
+			pr_err("Couldn't find part #%d on mmc device #%d\n",
 			      mmcpart, mmcdev);
 			return -ENODEV;
 		}
@@ -374,7 +374,7 @@
 	} else if (!strcmp(entity_type, "ext4")) {
 		dfu->layout = DFU_FS_EXT4;
 	} else {
-		error("Memory layout (%s) not supported!\n", entity_type);
+		pr_err("Memory layout (%s) not supported!\n", entity_type);
 		return -ENODEV;
 	}
 
@@ -397,7 +397,7 @@
 		dfu_file_buf = memalign(CONFIG_SYS_CACHELINE_SIZE,
 					CONFIG_SYS_DFU_MAX_FILE_SIZE);
 		if (!dfu_file_buf) {
-			error("Could not memalign 0x%x bytes",
+			pr_err("Could not memalign 0x%x bytes",
 			      CONFIG_SYS_DFU_MAX_FILE_SIZE);
 			return -ENOMEM;
 		}
diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c
index 6e3f531..2b5e05a 100644
--- a/drivers/dfu/dfu_ram.c
+++ b/drivers/dfu/dfu_ram.c
@@ -18,12 +18,12 @@
 				   u64 offset, void *buf, long *len)
 {
 	if (dfu->layout != DFU_RAM_ADDR) {
-		error("unsupported layout: %s\n", dfu_get_layout(dfu->layout));
+		pr_err("unsupported layout: %s\n", dfu_get_layout(dfu->layout));
 		return  -EINVAL;
 	}
 
 	if (offset > dfu->data.ram.size) {
-		error("request exceeds allowed area\n");
+		pr_err("request exceeds allowed area\n");
 		return -EINVAL;
 	}
 
@@ -62,14 +62,14 @@
 	for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) {
 		*parg = strsep(&s, " ");
 		if (*parg == NULL) {
-			error("Invalid number of arguments.\n");
+			pr_err("Invalid number of arguments.\n");
 			return -ENODEV;
 		}
 	}
 
 	dfu->dev_type = DFU_DEV_RAM;
 	if (strcmp(argv[0], "ram")) {
-		error("unsupported device: %s\n", argv[0]);
+		pr_err("unsupported device: %s\n", argv[0]);
 		return -ENODEV;
 	}
 
diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c
index cd71708..62bf797 100644
--- a/drivers/dfu/dfu_tftp.c
+++ b/drivers/dfu/dfu_tftp.c
@@ -43,7 +43,7 @@
 	alt_setting_num = dfu_get_alt(sb);
 	free(sb);
 	if (alt_setting_num < 0) {
-		error("Alt setting [%d] to write not found!",
+		pr_err("Alt setting [%d] to write not found!",
 		      alt_setting_num);
 		ret = -ENODEV;
 		goto done;
@@ -51,7 +51,7 @@
 
 	dfu = dfu_get_entity(alt_setting_num);
 	if (!dfu) {
-		error("DFU entity for alt: %d not found!", alt_setting_num);
+		pr_err("DFU entity for alt: %d not found!", alt_setting_num);
 		ret = -ENODEV;
 		goto done;
 	}
diff --git a/drivers/dma/dma-uclass.c b/drivers/dma/dma-uclass.c
index ea21fd9..3d0ce22 100644
--- a/drivers/dma/dma-uclass.c
+++ b/drivers/dma/dma-uclass.c
@@ -33,7 +33,7 @@
 	}
 
 	if (!dev) {
-		error("No DMA device found that supports %x type\n",
+		pr_err("No DMA device found that supports %x type\n",
 		      transfer_type);
 		return -EPROTONOSUPPORT;
 	}
diff --git a/drivers/dma/lpc32xx_dma.c b/drivers/dma/lpc32xx_dma.c
index 955adfe..63a8a2f 100644
--- a/drivers/dma/lpc32xx_dma.c
+++ b/drivers/dma/lpc32xx_dma.c
@@ -96,7 +96,7 @@
 {
 	if (unlikely(((BIT_MASK(channel) & alloc_ch) == 0) ||
 		     (channel >= DMA_NO_OF_CHANNELS))) {
-		error("Request for xfer on unallocated channel %d", channel);
+		pr_err("Request for xfer on unallocated channel %d", channel);
 		return -1;
 	}
 	writel(BIT_MASK(channel), &dma->int_tc_clear);
@@ -117,7 +117,7 @@
 
 	/* Check if given channel is valid */
 	if (unlikely(channel >= DMA_NO_OF_CHANNELS)) {
-		error("Request for status on unallocated channel %d", channel);
+		pr_err("Request for status on unallocated channel %d", channel);
 		return -1;
 	}
 
@@ -129,7 +129,7 @@
 			break;
 
 		if (get_timer(start) > CONFIG_SYS_HZ) {
-			error("DMA status timeout channel %d\n", channel);
+			pr_err("DMA status timeout channel %d\n", channel);
 			return -ETIMEDOUT;
 		}
 		udelay(1);
@@ -138,7 +138,7 @@
 	if (unlikely(readl(&dma->raw_err_stat) & BIT_MASK(channel))) {
 		setbits_le32(&dma->int_err_clear, BIT_MASK(channel));
 		setbits_le32(&dma->raw_err_stat, BIT_MASK(channel));
-		error("DMA error on channel %d\n", channel);
+		pr_err("DMA error on channel %d\n", channel);
 		return -1;
 	}
 	setbits_le32(&dma->int_tc_clear, BIT_MASK(channel));
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
index 39e9793..635eb78 100644
--- a/drivers/dma/ti-edma3.c
+++ b/drivers/dma/ti-edma3.c
@@ -491,7 +491,7 @@
 		__edma3_transfer(priv->base, 1, dst, src, len);
 		break;
 	default:
-		error("Transfer type not implemented in DMA driver\n");
+		pr_err("Transfer type not implemented in DMA driver\n");
 		break;
 	}
 
diff --git a/drivers/i2c/i2c-gpio.c b/drivers/i2c/i2c-gpio.c
index aeeb304..4e8fa21 100644
--- a/drivers/i2c/i2c-gpio.c
+++ b/drivers/i2c/i2c-gpio.c
@@ -322,7 +322,7 @@
 
 	return 0;
 error:
-	error("Can't get %s gpios! Error: %d", dev->name, ret);
+	pr_err("Can't get %s gpios! Error: %d", dev->name, ret);
 	return ret;
 }
 
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index c98c627..5d33815 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -755,7 +755,7 @@
 
 	ret = __omap24_i2c_setspeed(i2c_base, speed, &adap->waitdelay);
 	if (ret) {
-		error("%s: set i2c speed failed\n", __func__);
+		pr_err("%s: set i2c speed failed\n", __func__);
 		return ret;
 	}
 
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index bf5fefa..196f236 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -549,7 +549,7 @@
 	}
 
 	if (list_empty(solutions)) {
-		error("%s: no Prescaler solution\n", __func__);
+		pr_err("%s: no Prescaler solution\n", __func__);
 		ret = -EPERM;
 	}
 
@@ -627,7 +627,7 @@
 	}
 
 	if (!s) {
-		error("%s: no solution at all\n", __func__);
+		pr_err("%s: no solution at all\n", __func__);
 		ret = -EPERM;
 	}
 
@@ -643,14 +643,14 @@
 	int ret;
 
 	if (setup->speed >= STM32_I2C_SPEED_END) {
-		error("%s: speed out of bound {%d/%d}\n", __func__,
+		pr_err("%s: speed out of bound {%d/%d}\n", __func__,
 		      setup->speed, STM32_I2C_SPEED_END - 1);
 		return -EINVAL;
 	}
 
 	if ((setup->rise_time > i2c_specs[setup->speed].rise_max) ||
 	    (setup->fall_time > i2c_specs[setup->speed].fall_max)) {
-		error("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
+		pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n",
 		      __func__,
 		      setup->rise_time, i2c_specs[setup->speed].rise_max,
 		      setup->fall_time, i2c_specs[setup->speed].fall_max);
@@ -658,13 +658,13 @@
 	}
 
 	if (setup->dnf > STM32_I2C_DNF_MAX) {
-		error("%s: DNF out of bound %d/%d\n", __func__,
+		pr_err("%s: DNF out of bound %d/%d\n", __func__,
 		      setup->dnf, STM32_I2C_DNF_MAX);
 		return -EINVAL;
 	}
 
 	if (setup->speed_freq > i2c_specs[setup->speed].rate) {
-		error("%s: Freq {%d/%d}\n", __func__,
+		pr_err("%s: Freq {%d/%d}\n", __func__,
 		      setup->speed_freq, i2c_specs[setup->speed].rate);
 		return -EINVAL;
 	}
@@ -711,7 +711,7 @@
 	setup->clock_src = clk_get_rate(&i2c_priv->clk);
 
 	if (!setup->clock_src) {
-		error("%s: clock rate is 0\n", __func__);
+		pr_err("%s: clock rate is 0\n", __func__);
 		return -EINVAL;
 	}
 
@@ -734,7 +734,7 @@
 	} while (ret);
 
 	if (ret) {
-		error("%s: impossible to compute I2C timings.\n", __func__);
+		pr_err("%s: impossible to compute I2C timings.\n", __func__);
 		return ret;
 	}
 
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 3255e8e..7d23e51 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -372,12 +372,12 @@
 
 	ret = reset_get_by_name(dev, "i2c", &i2c_bus->reset_ctl);
 	if (ret) {
-		error("reset_get_by_name() failed: %d\n", ret);
+		pr_err("reset_get_by_name() failed: %d\n", ret);
 		return ret;
 	}
 	ret = clk_get_by_name(dev, "div-clk", &i2c_bus->clk);
 	if (ret) {
-		error("clk_get_by_name() failed: %d\n", ret);
+		pr_err("clk_get_by_name() failed: %d\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/misc/tegra186_bpmp.c b/drivers/misc/tegra186_bpmp.c
index d61bacf..1fdf8ef 100644
--- a/drivers/misc/tegra186_bpmp.c
+++ b/drivers/misc/tegra186_bpmp.c
@@ -44,7 +44,7 @@
 
 	ret = tegra_ivc_write_get_next_frame(&priv->ivc, &ivc_frame);
 	if (ret) {
-		error("tegra_ivc_write_get_next_frame() failed: %d\n", ret);
+		pr_err("tegra_ivc_write_get_next_frame() failed: %d\n", ret);
 		return ret;
 	}
 
@@ -55,7 +55,7 @@
 
 	ret = tegra_ivc_write_advance(&priv->ivc);
 	if (ret) {
-		error("tegra_ivc_write_advance() failed: %d\n", ret);
+		pr_err("tegra_ivc_write_advance() failed: %d\n", ret);
 		return ret;
 	}
 
@@ -63,7 +63,7 @@
 	for (;;) {
 		ret = tegra_ivc_channel_notified(&priv->ivc);
 		if (ret) {
-			error("tegra_ivc_channel_notified() failed: %d\n", ret);
+			pr_err("tegra_ivc_channel_notified() failed: %d\n", ret);
 			return ret;
 		}
 
@@ -73,7 +73,7 @@
 
 		/* Timeout 20ms; roughly 10x current max observed duration */
 		if ((timer_get_us() - start_time) > 20 * 1000) {
-			error("tegra_ivc_read_get_next_frame() timed out (%d)\n",
+			pr_err("tegra_ivc_read_get_next_frame() timed out (%d)\n",
 			      ret);
 			return -ETIMEDOUT;
 		}
@@ -86,12 +86,12 @@
 
 	ret = tegra_ivc_read_advance(&priv->ivc);
 	if (ret) {
-		error("tegra_ivc_write_advance() failed: %d\n", ret);
+		pr_err("tegra_ivc_write_advance() failed: %d\n", ret);
 		return ret;
 	}
 
 	if (err) {
-		error("BPMP responded with error %d\n", err);
+		pr_err("BPMP responded with error %d\n", err);
 		/* err isn't a U-Boot error code, so don't that */
 		return -EIO;
 	}
@@ -144,14 +144,14 @@
 	ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev),
 					      "shmem", NULL, 0, index, &args);
 	if (ret < 0) {
-		error("fdtdec_parse_phandle_with_args() failed: %d\n", ret);
+		pr_err("fdtdec_parse_phandle_with_args() failed: %d\n", ret);
 		return ret;
 	}
 
 	reg = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, args.node,
 						 "reg", 0, NULL, true);
 	if (reg == FDT_ADDR_T_NONE) {
-		error("fdtdec_get_addr_size_auto_noparent() failed\n");
+		pr_err("fdtdec_get_addr_size_auto_noparent() failed\n");
 		return -ENODEV;
 	}
 
@@ -166,7 +166,7 @@
 
 	ret = mbox_send(&priv->mbox, NULL);
 	if (ret)
-		error("mbox_send() failed: %d\n", ret);
+		pr_err("mbox_send() failed: %d\n", ret);
 }
 
 static int tegra186_bpmp_probe(struct udevice *dev)
@@ -179,18 +179,18 @@
 
 	ret = mbox_get_by_index(dev, 0, &priv->mbox);
 	if (ret) {
-		error("mbox_get_by_index() failed: %d\n", ret);
+		pr_err("mbox_get_by_index() failed: %d\n", ret);
 		return ret;
 	}
 
 	tx_base = tegra186_bpmp_get_shmem(dev, 0);
 	if (IS_ERR_VALUE(tx_base)) {
-		error("tegra186_bpmp_get_shmem failed for tx_base\n");
+		pr_err("tegra186_bpmp_get_shmem failed for tx_base\n");
 		return tx_base;
 	}
 	rx_base = tegra186_bpmp_get_shmem(dev, 1);
 	if (IS_ERR_VALUE(rx_base)) {
-		error("tegra186_bpmp_get_shmem failed for rx_base\n");
+		pr_err("tegra186_bpmp_get_shmem failed for rx_base\n");
 		return rx_base;
 	}
 	debug("shmem: rx=%lx, tx=%lx\n", rx_base, tx_base);
@@ -198,7 +198,7 @@
 	ret = tegra_ivc_init(&priv->ivc, rx_base, tx_base, BPMP_IVC_FRAME_COUNT,
 			     BPMP_IVC_FRAME_SIZE, tegra186_bpmp_ivc_notify);
 	if (ret) {
-		error("tegra_ivc_init() failed: %d\n", ret);
+		pr_err("tegra_ivc_init() failed: %d\n", ret);
 		return ret;
 	}
 
@@ -211,7 +211,7 @@
 
 		/* Timeout 100ms */
 		if ((timer_get_us() - start_time) > 100 * 1000) {
-			error("Initial IVC reset timed out (%d)\n", ret);
+			pr_err("Initial IVC reset timed out (%d)\n", ret);
 			ret = -ETIMEDOUT;
 			goto err_free_mbox;
 		}
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 40f7892..5edd383 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -155,7 +155,7 @@
 
 	priv = malloc(sizeof(struct dwmci_exynos_priv_data));
 	if (!priv) {
-		error("dwmci_exynos_priv_data malloc fail!\n");
+		pr_err("dwmci_exynos_priv_data malloc fail!\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c
index d795198..44a8ef8 100644
--- a/drivers/mmc/hi6220_dw_mmc.c
+++ b/drivers/mmc/hi6220_dw_mmc.c
@@ -44,7 +44,7 @@
 
 	host = calloc(1, sizeof(struct dwmci_host));
 	if (!host) {
-		error("dwmci_host calloc failed!\n");
+		pr_err("dwmci_host calloc failed!\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
index d8b5888..a98c1eb 100644
--- a/drivers/mmc/sti_sdhci.c
+++ b/drivers/mmc/sti_sdhci.c
@@ -43,7 +43,7 @@
 	if (plat->instance) {
 		ret = reset_deassert(&plat->reset);
 		if (ret < 0) {
-			error("MMC1 deassert failed: %d", ret);
+			pr_err("MMC1 deassert failed: %d", ret);
 			return ret;
 		}
 	}
diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c
index 0e1f40b..0bf7135 100644
--- a/drivers/mmc/stm32_sdmmc2.c
+++ b/drivers/mmc/stm32_sdmmc2.c
@@ -569,7 +569,7 @@
 	case 1:
 		break;
 	default:
-		error("invalid \"bus-width\" property, force to 1\n");
+		pr_err("invalid \"bus-width\" property, force to 1\n");
 	}
 
 	upriv->mmc = &plat->mmc;
diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
index 2b7cb7f..490a01f 100644
--- a/drivers/mmc/xenon_sdhci.c
+++ b/drivers/mmc/xenon_sdhci.c
@@ -159,7 +159,7 @@
 	}
 
 	if (time <= 0) {
-		error("Failed to enable MMC internal clock in time\n");
+		pr_err("Failed to enable MMC internal clock in time\n");
 		return -ETIMEDOUT;
 	}
 
@@ -187,7 +187,7 @@
 	}
 
 	if (time <= 0) {
-		error("Failed to init MMC PHY in time\n");
+		pr_err("Failed to init MMC PHY in time\n");
 		return -ETIMEDOUT;
 	}
 
diff --git a/drivers/mtd/nand/lpc32xx_nand_mlc.c b/drivers/mtd/nand/lpc32xx_nand_mlc.c
index 3af7e6d..e1b3670 100644
--- a/drivers/mtd/nand/lpc32xx_nand_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_nand_mlc.c
@@ -583,21 +583,21 @@
 	/* identify chip */
 	ret = nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_CHIPS, NULL);
 	if (ret) {
-		error("nand_scan_ident returned %i", ret);
+		pr_err("nand_scan_ident returned %i", ret);
 		return;
 	}
 
 	/* finish scanning the chip */
 	ret = nand_scan_tail(mtd);
 	if (ret) {
-		error("nand_scan_tail returned %i", ret);
+		pr_err("nand_scan_tail returned %i", ret);
 		return;
 	}
 
 	/* chip is good, register it */
 	ret = nand_register(0, mtd);
 	if (ret)
-		error("nand_register returned %i", ret);
+		pr_err("nand_register returned %i", ret);
 }
 
 #else /* defined(CONFIG_SPL_BUILD) */
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 0042a7b..6ab3c8a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1559,7 +1559,7 @@
 
 		pdata->num_cs = fdtdec_get_int(blob, node, "num-cs", 1);
 		if (pdata->num_cs != 1) {
-			error("pxa3xx driver supports single CS only\n");
+			pr_err("pxa3xx driver supports single CS only\n");
 			break;
 		}
 
diff --git a/drivers/net/bcm-sf2-eth-gmac.c b/drivers/net/bcm-sf2-eth-gmac.c
index 9ff72fa..a2b594e 100644
--- a/drivers/net/bcm-sf2-eth-gmac.c
+++ b/drivers/net/bcm-sf2-eth-gmac.c
@@ -610,7 +610,7 @@
 
 	/* Busy wait timeout is 1ms */
 	if (gmac_mii_busywait(1000)) {
-		error("%s: Prepare MII read: MII/MDIO busy\n", __func__);
+		pr_err("%s: Prepare MII read: MII/MDIO busy\n", __func__);
 		return -1;
 	}
 
@@ -622,7 +622,7 @@
 	writel(tmp, GMAC_MII_DATA_ADDR);
 
 	if (gmac_mii_busywait(1000)) {
-		error("%s: MII read failure: MII/MDIO busy\n", __func__);
+		pr_err("%s: MII read failure: MII/MDIO busy\n", __func__);
 		return -1;
 	}
 
@@ -638,7 +638,7 @@
 
 	/* Busy wait timeout is 1ms */
 	if (gmac_mii_busywait(1000)) {
-		error("%s: Prepare MII write: MII/MDIO busy\n", __func__);
+		pr_err("%s: Prepare MII write: MII/MDIO busy\n", __func__);
 		return -1;
 	}
 
@@ -651,7 +651,7 @@
 	writel(tmp, GMAC_MII_DATA_ADDR);
 
 	if (gmac_mii_busywait(1000)) {
-		error("%s: MII write failure: MII/MDIO busy\n", __func__);
+		pr_err("%s: MII write failure: MII/MDIO busy\n", __func__);
 		return -1;
 	}
 
@@ -742,7 +742,7 @@
 	} else if (speed == 10) {
 		speed_cfg = 0;
 	} else {
-		error("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
+		pr_err("%s: Invalid GMAC speed(%d)!\n", __func__, speed);
 		return -1;
 	}
 
@@ -820,7 +820,7 @@
 	writel(0, GMAC0_INT_STATUS_ADDR);
 
 	if (dma_init(dma) < 0) {
-		error("%s: GMAC dma_init failed\n", __func__);
+		pr_err("%s: GMAC dma_init failed\n", __func__);
 		goto err_exit;
 	}
 
@@ -855,7 +855,7 @@
 	writel(tmp, GMAC_MII_CTRL_ADDR);
 
 	if (gmac_mii_busywait(1000)) {
-		error("%s: Configure MDIO: MII/MDIO busy\n", __func__);
+		pr_err("%s: Configure MDIO: MII/MDIO busy\n", __func__);
 		goto err_exit;
 	}
 
diff --git a/drivers/net/bcm-sf2-eth.c b/drivers/net/bcm-sf2-eth.c
index e274736..9056f71 100644
--- a/drivers/net/bcm-sf2-eth.c
+++ b/drivers/net/bcm-sf2-eth.c
@@ -40,7 +40,7 @@
 
 	rc = eth->mac_init(dev);
 	if (rc) {
-		error("%s: Couldn't cofigure MAC!\n", __func__);
+		pr_err("%s: Couldn't cofigure MAC!\n", __func__);
 		return rc;
 	}
 
@@ -90,7 +90,7 @@
 		debug(".");
 		i++;
 		if (i > 20) {
-			error("%s: Tx timeout: retried 20 times\n", __func__);
+			pr_err("%s: Tx timeout: retried 20 times\n", __func__);
 			rc = -1;
 			break;
 		}
@@ -117,7 +117,7 @@
 			debug("\nNO More Rx\n");
 			break;
 		} else if ((rcvlen == 0) || (rcvlen > RX_BUF_SIZE)) {
-			error("%s: Wrong Ethernet packet size (%d B), skip!\n",
+			pr_err("%s: Wrong Ethernet packet size (%d B), skip!\n",
 			      __func__, rcvlen);
 			break;
 		} else {
@@ -166,9 +166,9 @@
 	 */
 	for (i = 0; i < eth->port_num; i++) {
 		if (phy_startup(eth->port[i])) {
-			error("%s: PHY %d startup failed!\n", __func__, i);
+			pr_err("%s: PHY %d startup failed!\n", __func__, i);
 			if (i == CONFIG_BCM_SF2_ETH_DEFAULT_PORT) {
-				error("%s: No default port %d!\n", __func__, i);
+				pr_err("%s: No default port %d!\n", __func__, i);
 				return -1;
 			}
 		}
@@ -205,13 +205,13 @@
 
 	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
 	if (dev == NULL) {
-		error("%s: Not enough memory!\n", __func__);
+		pr_err("%s: Not enough memory!\n", __func__);
 		return -1;
 	}
 
 	eth = (struct eth_info *)malloc(sizeof(struct eth_info));
 	if (eth == NULL) {
-		error("%s: Not enough memory!\n", __func__);
+		pr_err("%s: Not enough memory!\n", __func__);
 		return -1;
 	}
 
@@ -234,7 +234,7 @@
 	if (gmac_add(dev)) {
 		free(eth);
 		free(dev);
-		error("%s: Adding GMAC failed!\n", __func__);
+		pr_err("%s: Adding GMAC failed!\n", __func__);
 		return -1;
 	}
 #else
@@ -263,7 +263,7 @@
 
 	rc = bcm_sf2_eth_init(dev);
 	if (rc != 0) {
-		error("%s: configuration failed!\n", __func__);
+		pr_err("%s: configuration failed!\n", __func__);
 		return -1;
 	}
 
diff --git a/drivers/net/cpsw-common.c b/drivers/net/cpsw-common.c
index 8970ee0..0dc83ab 100644
--- a/drivers/net/cpsw-common.c
+++ b/drivers/net/cpsw-common.c
@@ -29,14 +29,14 @@
 
 	syscon = fdtdec_lookup_phandle(fdt, node, "syscon");
 	if (syscon < 0) {
-		error("Syscon offset not found\n");
+		pr_err("Syscon offset not found\n");
 		return -ENOENT;
 	}
 
 	addr = (u32)map_physmem(fdt_translate_address(fdt, syscon, &gmii),
 				sizeof(u32), MAP_NOCACHE);
 	if (addr == FDT_ADDR_T_NONE) {
-		error("Not able to get syscon address to get mac efuse address\n");
+		pr_err("Not able to get syscon address to get mac efuse address\n");
 		return -ENOENT;
 	}
 
@@ -69,14 +69,14 @@
 
 	syscon = fdtdec_lookup_phandle(fdt, node, "syscon");
 	if (syscon < 0) {
-		error("Syscon offset not found\n");
+		pr_err("Syscon offset not found\n");
 		return -ENOENT;
 	}
 
 	addr = (u32)map_physmem(fdt_translate_address(fdt, syscon, &gmii),
 				sizeof(u32), MAP_NOCACHE);
 	if (addr == FDT_ADDR_T_NONE) {
-		error("Not able to get syscon address to get mac efuse address\n");
+		pr_err("Not able to get syscon address to get mac efuse address\n");
 		return -ENOENT;
 	}
 
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index d7db0fc..b72258f 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -1368,7 +1368,7 @@
 
 			mdio_base = cpsw_get_addr_by_node(fdt, subnode);
 			if (mdio_base == FDT_ADDR_T_NONE) {
-				error("Not able to get MDIO address space\n");
+				pr_err("Not able to get MDIO address space\n");
 				return -ENOENT;
 			}
 			priv->data.mdio_base = mdio_base;
@@ -1407,7 +1407,7 @@
 								    subnode);
 
 			if (priv->data.gmii_sel == FDT_ADDR_T_NONE) {
-				error("Not able to get gmii_sel reg address\n");
+				pr_err("Not able to get gmii_sel reg address\n");
 				return -ENOENT;
 			}
 
@@ -1418,7 +1418,7 @@
 			phy_sel_compat = fdt_getprop(fdt, subnode, "compatible",
 						     NULL);
 			if (!phy_sel_compat) {
-				error("Not able to get gmii_sel compatible\n");
+				pr_err("Not able to get gmii_sel compatible\n");
 				return -ENOENT;
 			}
 		}
@@ -1434,7 +1434,7 @@
 
 	ret = ti_cm_get_macid(dev, active_slave, pdata->enetaddr);
 	if (ret < 0) {
-		error("cpsw read efuse mac failed\n");
+		pr_err("cpsw read efuse mac failed\n");
 		return ret;
 	}
 
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 5c4315f..00076cf 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -377,7 +377,7 @@
 
 	ret = eqos_mdio_wait_idle(eqos);
 	if (ret) {
-		error("MDIO not idle at entry");
+		pr_err("MDIO not idle at entry");
 		return ret;
 	}
 
@@ -397,7 +397,7 @@
 
 	ret = eqos_mdio_wait_idle(eqos);
 	if (ret) {
-		error("MDIO read didn't complete");
+		pr_err("MDIO read didn't complete");
 		return ret;
 	}
 
@@ -421,7 +421,7 @@
 
 	ret = eqos_mdio_wait_idle(eqos);
 	if (ret) {
-		error("MDIO not idle at entry");
+		pr_err("MDIO not idle at entry");
 		return ret;
 	}
 
@@ -443,7 +443,7 @@
 
 	ret = eqos_mdio_wait_idle(eqos);
 	if (ret) {
-		error("MDIO read didn't complete");
+		pr_err("MDIO read didn't complete");
 		return ret;
 	}
 
@@ -459,37 +459,37 @@
 
 	ret = clk_enable(&eqos->clk_slave_bus);
 	if (ret < 0) {
-		error("clk_enable(clk_slave_bus) failed: %d", ret);
+		pr_err("clk_enable(clk_slave_bus) failed: %d", ret);
 		goto err;
 	}
 
 	ret = clk_enable(&eqos->clk_master_bus);
 	if (ret < 0) {
-		error("clk_enable(clk_master_bus) failed: %d", ret);
+		pr_err("clk_enable(clk_master_bus) failed: %d", ret);
 		goto err_disable_clk_slave_bus;
 	}
 
 	ret = clk_enable(&eqos->clk_rx);
 	if (ret < 0) {
-		error("clk_enable(clk_rx) failed: %d", ret);
+		pr_err("clk_enable(clk_rx) failed: %d", ret);
 		goto err_disable_clk_master_bus;
 	}
 
 	ret = clk_enable(&eqos->clk_ptp_ref);
 	if (ret < 0) {
-		error("clk_enable(clk_ptp_ref) failed: %d", ret);
+		pr_err("clk_enable(clk_ptp_ref) failed: %d", ret);
 		goto err_disable_clk_rx;
 	}
 
 	ret = clk_set_rate(&eqos->clk_ptp_ref, 125 * 1000 * 1000);
 	if (ret < 0) {
-		error("clk_set_rate(clk_ptp_ref) failed: %d", ret);
+		pr_err("clk_set_rate(clk_ptp_ref) failed: %d", ret);
 		goto err_disable_clk_ptp_ref;
 	}
 
 	ret = clk_enable(&eqos->clk_tx);
 	if (ret < 0) {
-		error("clk_enable(clk_tx) failed: %d", ret);
+		pr_err("clk_enable(clk_tx) failed: %d", ret);
 		goto err_disable_clk_ptp_ref;
 	}
 
@@ -533,7 +533,7 @@
 
 	ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 1);
 	if (ret < 0) {
-		error("dm_gpio_set_value(phy_reset, assert) failed: %d", ret);
+		pr_err("dm_gpio_set_value(phy_reset, assert) failed: %d", ret);
 		return ret;
 	}
 
@@ -541,13 +541,13 @@
 
 	ret = dm_gpio_set_value(&eqos->phy_reset_gpio, 0);
 	if (ret < 0) {
-		error("dm_gpio_set_value(phy_reset, deassert) failed: %d", ret);
+		pr_err("dm_gpio_set_value(phy_reset, deassert) failed: %d", ret);
 		return ret;
 	}
 
 	ret = reset_assert(&eqos->reset_ctl);
 	if (ret < 0) {
-		error("reset_assert() failed: %d", ret);
+		pr_err("reset_assert() failed: %d", ret);
 		return ret;
 	}
 
@@ -555,7 +555,7 @@
 
 	ret = reset_deassert(&eqos->reset_ctl);
 	if (ret < 0) {
-		error("reset_deassert() failed: %d", ret);
+		pr_err("reset_deassert() failed: %d", ret);
 		return ret;
 	}
 
@@ -591,14 +591,14 @@
 	ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
 			   EQOS_AUTO_CAL_STATUS_ACTIVE, true, 10, false);
 	if (ret) {
-		error("calibrate didn't start");
+		pr_err("calibrate didn't start");
 		goto failed;
 	}
 
 	ret = wait_for_bit(__func__, &eqos->tegra186_regs->auto_cal_status,
 			   EQOS_AUTO_CAL_STATUS_ACTIVE, false, 10, false);
 	if (ret) {
-		error("calibrate didn't finish");
+		pr_err("calibrate didn't finish");
 		goto failed;
 	}
 
@@ -713,13 +713,13 @@
 		rate = 2.5 * 1000 * 1000;
 		break;
 	default:
-		error("invalid speed %d", eqos->phy->speed);
+		pr_err("invalid speed %d", eqos->phy->speed);
 		return -EINVAL;
 	}
 
 	ret = clk_set_rate(&eqos->clk_tx, rate);
 	if (ret < 0) {
-		error("clk_set_rate(tx_clk, %lu) failed: %d", rate, ret);
+		pr_err("clk_set_rate(tx_clk, %lu) failed: %d", rate, ret);
 		return ret;
 	}
 
@@ -739,7 +739,7 @@
 	else
 		ret = eqos_set_half_duplex(dev);
 	if (ret < 0) {
-		error("eqos_set_*_duplex() failed: %d", ret);
+		pr_err("eqos_set_*_duplex() failed: %d", ret);
 		return ret;
 	}
 
@@ -757,24 +757,24 @@
 		ret = eqos_set_mii_speed_10(dev);
 		break;
 	default:
-		error("invalid speed %d", eqos->phy->speed);
+		pr_err("invalid speed %d", eqos->phy->speed);
 		return -EINVAL;
 	}
 	if (ret < 0) {
-		error("eqos_set_*mii_speed*() failed: %d", ret);
+		pr_err("eqos_set_*mii_speed*() failed: %d", ret);
 		return ret;
 	}
 
 	if (en_calibration) {
 		ret = eqos_calibrate_pads_tegra186(dev);
 		if (ret < 0) {
-			error("eqos_calibrate_pads_tegra186() failed: %d", ret);
+			pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
 			return ret;
 		}
 	} else {
 		ret = eqos_disable_calibration_tegra186(dev);
 		if (ret < 0) {
-			error("eqos_disable_calibration_tegra186() failed: %d",
+			pr_err("eqos_disable_calibration_tegra186() failed: %d",
 			      ret);
 			return ret;
 		}
@@ -782,7 +782,7 @@
 
 	ret = eqos_set_tx_clk_speed_tegra186(dev);
 	if (ret < 0) {
-		error("eqos_set_tx_clk_speed_tegra186() failed: %d", ret);
+		pr_err("eqos_set_tx_clk_speed_tegra186() failed: %d", ret);
 		return ret;
 	}
 
@@ -848,13 +848,13 @@
 
 	ret = eqos_start_clks_tegra186(dev);
 	if (ret < 0) {
-		error("eqos_start_clks_tegra186() failed: %d", ret);
+		pr_err("eqos_start_clks_tegra186() failed: %d", ret);
 		goto err;
 	}
 
 	ret = eqos_start_resets_tegra186(dev);
 	if (ret < 0) {
-		error("eqos_start_resets_tegra186() failed: %d", ret);
+		pr_err("eqos_start_resets_tegra186() failed: %d", ret);
 		goto err_stop_clks;
 	}
 
@@ -865,13 +865,13 @@
 	ret = wait_for_bit(__func__, &eqos->dma_regs->mode,
 			   EQOS_DMA_MODE_SWR, false, 10, false);
 	if (ret) {
-		error("EQOS_DMA_MODE_SWR stuck");
+		pr_err("EQOS_DMA_MODE_SWR stuck");
 		goto err_stop_resets;
 	}
 
 	ret = eqos_calibrate_pads_tegra186(dev);
 	if (ret < 0) {
-		error("eqos_calibrate_pads_tegra186() failed: %d", ret);
+		pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
 		goto err_stop_resets;
 	}
 
@@ -881,28 +881,28 @@
 
 	eqos->phy = phy_connect(eqos->mii, 0, dev, 0);
 	if (!eqos->phy) {
-		error("phy_connect() failed");
+		pr_err("phy_connect() failed");
 		goto err_stop_resets;
 	}
 	ret = phy_config(eqos->phy);
 	if (ret < 0) {
-		error("phy_config() failed: %d", ret);
+		pr_err("phy_config() failed: %d", ret);
 		goto err_shutdown_phy;
 	}
 	ret = phy_startup(eqos->phy);
 	if (ret < 0) {
-		error("phy_startup() failed: %d", ret);
+		pr_err("phy_startup() failed: %d", ret);
 		goto err_shutdown_phy;
 	}
 
 	if (!eqos->phy->link) {
-		error("No link");
+		pr_err("No link");
 		goto err_shutdown_phy;
 	}
 
 	ret = eqos_adjust_link(dev);
 	if (ret < 0) {
-		error("eqos_adjust_link() failed: %d", ret);
+		pr_err("eqos_adjust_link() failed: %d", ret);
 		goto err_shutdown_phy;
 	}
 
@@ -1119,7 +1119,7 @@
 err_stop_clks:
 	eqos_stop_clks_tegra186(dev);
 err:
-	error("FAILED: %d", ret);
+	pr_err("FAILED: %d", ret);
 	return ret;
 }
 
@@ -1361,7 +1361,7 @@
 
 	ret = reset_get_by_name(dev, "eqos", &eqos->reset_ctl);
 	if (ret) {
-		error("reset_get_by_name(rst) failed: %d", ret);
+		pr_err("reset_get_by_name(rst) failed: %d", ret);
 		return ret;
 	}
 
@@ -1369,38 +1369,38 @@
 				   &eqos->phy_reset_gpio,
 				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
 	if (ret) {
-		error("gpio_request_by_name(phy reset) failed: %d", ret);
+		pr_err("gpio_request_by_name(phy reset) failed: %d", ret);
 		goto err_free_reset_eqos;
 	}
 
 	ret = clk_get_by_name(dev, "slave_bus", &eqos->clk_slave_bus);
 	if (ret) {
-		error("clk_get_by_name(slave_bus) failed: %d", ret);
+		pr_err("clk_get_by_name(slave_bus) failed: %d", ret);
 		goto err_free_gpio_phy_reset;
 	}
 
 	ret = clk_get_by_name(dev, "master_bus", &eqos->clk_master_bus);
 	if (ret) {
-		error("clk_get_by_name(master_bus) failed: %d", ret);
+		pr_err("clk_get_by_name(master_bus) failed: %d", ret);
 		goto err_free_clk_slave_bus;
 	}
 
 	ret = clk_get_by_name(dev, "rx", &eqos->clk_rx);
 	if (ret) {
-		error("clk_get_by_name(rx) failed: %d", ret);
+		pr_err("clk_get_by_name(rx) failed: %d", ret);
 		goto err_free_clk_master_bus;
 	}
 
 	ret = clk_get_by_name(dev, "ptp_ref", &eqos->clk_ptp_ref);
 	if (ret) {
-		error("clk_get_by_name(ptp_ref) failed: %d", ret);
+		pr_err("clk_get_by_name(ptp_ref) failed: %d", ret);
 		goto err_free_clk_rx;
 		return ret;
 	}
 
 	ret = clk_get_by_name(dev, "tx", &eqos->clk_tx);
 	if (ret) {
-		error("clk_get_by_name(tx) failed: %d", ret);
+		pr_err("clk_get_by_name(tx) failed: %d", ret);
 		goto err_free_clk_ptp_ref;
 	}
 
@@ -1454,7 +1454,7 @@
 
 	eqos->regs = devfdt_get_addr(dev);
 	if (eqos->regs == FDT_ADDR_T_NONE) {
-		error("devfdt_get_addr() failed");
+		pr_err("devfdt_get_addr() failed");
 		return -ENODEV;
 	}
 	eqos->mac_regs = (void *)(eqos->regs + EQOS_MAC_REGS_BASE);
@@ -1464,19 +1464,19 @@
 
 	ret = eqos_probe_resources_core(dev);
 	if (ret < 0) {
-		error("eqos_probe_resources_core() failed: %d", ret);
+		pr_err("eqos_probe_resources_core() failed: %d", ret);
 		return ret;
 	}
 
 	ret = eqos_probe_resources_tegra186(dev);
 	if (ret < 0) {
-		error("eqos_probe_resources_tegra186() failed: %d", ret);
+		pr_err("eqos_probe_resources_tegra186() failed: %d", ret);
 		goto err_remove_resources_core;
 	}
 
 	eqos->mii = mdio_alloc();
 	if (!eqos->mii) {
-		error("mdio_alloc() failed");
+		pr_err("mdio_alloc() failed");
 		goto err_remove_resources_tegra;
 	}
 	eqos->mii->read = eqos_mdio_read;
@@ -1486,7 +1486,7 @@
 
 	ret = mdio_register(eqos->mii);
 	if (ret < 0) {
-		error("mdio_register() failed: %d", ret);
+		pr_err("mdio_register() failed: %d", ret);
 		goto err_free_mdio;
 	}
 
diff --git a/drivers/net/ep93xx_eth.c b/drivers/net/ep93xx_eth.c
index a94191b..bc45706 100644
--- a/drivers/net/ep93xx_eth.c
+++ b/drivers/net/ep93xx_eth.c
@@ -324,7 +324,7 @@
 			debug("reporting %d bytes...\n", len);
 		} else {
 			/* Do we have an erroneous packet? */
-			error("packet rx error, status %08X %08X",
+			pr_err("packet rx error, status %08X %08X",
 				priv->rx_sq.current->word1,
 				priv->rx_sq.current->word2);
 			dump_rx_descriptor_queue(dev);
@@ -401,7 +401,7 @@
 		; /* noop */
 
 	if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
-		error("packet tx error, status %08X",
+		pr_err("packet tx error, status %08X",
 			priv->tx_sq.current->word1);
 		dump_tx_descriptor_queue(dev);
 		dump_tx_status_queue(dev);
@@ -452,7 +452,7 @@
 
 	priv = malloc(sizeof(*priv));
 	if (!priv) {
-		error("malloc() failed");
+		pr_err("malloc() failed");
 		goto eth_init_failed_0;
 	}
 	memset(priv, 0, sizeof(*priv));
@@ -462,34 +462,34 @@
 	priv->tx_dq.base = calloc(NUMTXDESC,
 				sizeof(struct tx_descriptor));
 	if (priv->tx_dq.base == NULL) {
-		error("calloc() failed");
+		pr_err("calloc() failed");
 		goto eth_init_failed_1;
 	}
 
 	priv->tx_sq.base = calloc(NUMTXDESC,
 				sizeof(struct tx_status));
 	if (priv->tx_sq.base == NULL) {
-		error("calloc() failed");
+		pr_err("calloc() failed");
 		goto eth_init_failed_2;
 	}
 
 	priv->rx_dq.base = calloc(NUMRXDESC,
 				sizeof(struct rx_descriptor));
 	if (priv->rx_dq.base == NULL) {
-		error("calloc() failed");
+		pr_err("calloc() failed");
 		goto eth_init_failed_3;
 	}
 
 	priv->rx_sq.base = calloc(NUMRXDESC,
 				sizeof(struct rx_status));
 	if (priv->rx_sq.base == NULL) {
-		error("calloc() failed");
+		pr_err("calloc() failed");
 		goto eth_init_failed_4;
 	}
 
 	dev = malloc(sizeof *dev);
 	if (dev == NULL) {
-		error("malloc() failed");
+		pr_err("malloc() failed");
 		goto eth_init_failed_5;
 	}
 	memset(dev, 0, sizeof *dev);
diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c
index 72ef42c..21ccab4 100644
--- a/drivers/net/keystone_net.c
+++ b/drivers/net/keystone_net.c
@@ -757,7 +757,7 @@
 	qm_init();
 
 	if (ksnav_init(priv->netcp_pktdma, &priv->net_rx_buffs)) {
-		error("ksnav_init failed\n");
+		pr_err("ksnav_init failed\n");
 		goto err_knav_init;
 	}
 
@@ -773,7 +773,7 @@
 
 		phy_startup(priv->phydev);
 		if (priv->phydev->link == 0) {
-			error("phy startup failed\n");
+			pr_err("phy startup failed\n");
 			goto err_phy_start;
 		}
 	}
@@ -923,7 +923,7 @@
 		 */
 		mdio_bus = mdio_alloc();
 		if (!mdio_bus) {
-			error("MDIO alloc failed\n");
+			pr_err("MDIO alloc failed\n");
 			return -ENOMEM;
 		}
 		priv->mdio_bus = mdio_bus;
@@ -935,7 +935,7 @@
 
 		ret = mdio_register(mdio_bus);
 		if (ret) {
-			error("MDIO bus register failed\n");
+			pr_err("MDIO bus register failed\n");
 			return ret;
 		}
 	} else {
@@ -1011,7 +1011,7 @@
 					slave_name, offset_to_ofnode(slave),
 					&sl_dev);
 			if (ret) {
-				error("ks2_net - not able to bind slave interfaces\n");
+				pr_err("ks2_net - not able to bind slave interfaces\n");
 				return ret;
 			}
 		}
@@ -1031,7 +1031,7 @@
 		ret = device_bind_driver_to_node(dev, "eth_ks2_sl", slave_name,
 					offset_to_ofnode(slave), &sl_dev);
 		if (ret) {
-			error("ks2_net - not able to bind slave interfaces\n");
+			pr_err("ks2_net - not able to bind slave interfaces\n");
 			return ret;
 		}
 	}
@@ -1074,7 +1074,7 @@
 
 		mdio = fdt_parent_offset(fdt, phy);
 		if (mdio < 0) {
-			error("mdio dt not found\n");
+			pr_err("mdio dt not found\n");
 			return -ENODEV;
 		}
 		priv->mdio_base = (void *)fdtdec_get_addr(fdt, mdio, "reg");
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index 7d920d4..b5bd25e 100644
--- a/drivers/pci/pci_tegra.c
+++ b/drivers/pci/pci_tegra.c
@@ -369,7 +369,7 @@
 
 	addr = ofnode_get_property(node, "assigned-addresses", &len);
 	if (!addr) {
-		error("property \"assigned-addresses\" not found");
+		pr_err("property \"assigned-addresses\" not found");
 		return -FDT_ERR_NOTFOUND;
 	}
 
@@ -460,7 +460,7 @@
 
 	err = ofnode_read_u32_default(node, "nvidia,num-lanes", -1);
 	if (err < 0) {
-		error("failed to parse \"nvidia,num-lanes\" property");
+		pr_err("failed to parse \"nvidia,num-lanes\" property");
 		return err;
 	}
 
@@ -468,7 +468,7 @@
 
 	err = ofnode_read_pci_addr(node, 0, "reg", &addr);
 	if (err < 0) {
-		error("failed to parse \"reg\" property");
+		pr_err("failed to parse \"reg\" property");
 		return err;
 	}
 
@@ -491,25 +491,25 @@
 
 	err = dev_read_resource(dev, 0, &pcie->pads);
 	if (err < 0) {
-		error("resource \"pads\" not found");
+		pr_err("resource \"pads\" not found");
 		return err;
 	}
 
 	err = dev_read_resource(dev, 1, &pcie->afi);
 	if (err < 0) {
-		error("resource \"afi\" not found");
+		pr_err("resource \"afi\" not found");
 		return err;
 	}
 
 	err = dev_read_resource(dev, 2, &pcie->cs);
 	if (err < 0) {
-		error("resource \"cs\" not found");
+		pr_err("resource \"cs\" not found");
 		return err;
 	}
 
 	err = tegra_pcie_board_init();
 	if (err < 0) {
-		error("tegra_pcie_board_init() failed: err=%d", err);
+		pr_err("tegra_pcie_board_init() failed: err=%d", err);
 		return err;
 	}
 
@@ -518,7 +518,7 @@
 	if (pcie->phy) {
 		err = tegra_xusb_phy_prepare(pcie->phy);
 		if (err < 0) {
-			error("failed to prepare PHY: %d", err);
+			pr_err("failed to prepare PHY: %d", err);
 			return err;
 		}
 	}
@@ -530,7 +530,7 @@
 
 		err = tegra_pcie_parse_port_info(subnode, &index, &num_lanes);
 		if (err < 0) {
-			error("failed to obtain root port info");
+			pr_err("failed to obtain root port info");
 			continue;
 		}
 
@@ -560,7 +560,7 @@
 	err = tegra_pcie_get_xbar_config(dev_ofnode(dev), lanes, id,
 					 &pcie->xbar);
 	if (err < 0) {
-		error("invalid lane configuration");
+		pr_err("invalid lane configuration");
 		return err;
 	}
 
@@ -574,31 +574,31 @@
 
 	ret = power_domain_on(&pcie->pwrdom);
 	if (ret) {
-		error("power_domain_on() failed: %d\n", ret);
+		pr_err("power_domain_on() failed: %d\n", ret);
 		return ret;
 	}
 
 	ret = clk_enable(&pcie->clk_afi);
 	if (ret) {
-		error("clk_enable(afi) failed: %d\n", ret);
+		pr_err("clk_enable(afi) failed: %d\n", ret);
 		return ret;
 	}
 
 	ret = clk_enable(&pcie->clk_pex);
 	if (ret) {
-		error("clk_enable(pex) failed: %d\n", ret);
+		pr_err("clk_enable(pex) failed: %d\n", ret);
 		return ret;
 	}
 
 	ret = reset_deassert(&pcie->reset_afi);
 	if (ret) {
-		error("reset_deassert(afi) failed: %d\n", ret);
+		pr_err("reset_deassert(afi) failed: %d\n", ret);
 		return ret;
 	}
 
 	ret = reset_deassert(&pcie->reset_pex);
 	if (ret) {
-		error("reset_deassert(pex) failed: %d\n", ret);
+		pr_err("reset_deassert(pex) failed: %d\n", ret);
 		return ret;
 	}
 
@@ -618,14 +618,14 @@
 
 	err = tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
 	if (err < 0) {
-		error("failed to power off PCIe partition: %d", err);
+		pr_err("failed to power off PCIe partition: %d", err);
 		return err;
 	}
 
 	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
 						PERIPH_ID_PCIE);
 	if (err < 0) {
-		error("failed to power up PCIe partition: %d", err);
+		pr_err("failed to power up PCIe partition: %d", err);
 		return err;
 	}
 
@@ -645,7 +645,7 @@
 
 	err = tegra_plle_enable();
 	if (err < 0) {
-		error("failed to enable PLLE: %d\n", err);
+		pr_err("failed to enable PLLE: %d\n", err);
 		return err;
 	}
 
@@ -705,7 +705,7 @@
 	/* wait for the PLL to lock */
 	err = tegra_pcie_pll_wait(pcie, 500);
 	if (err < 0) {
-		error("PLL failed to lock: %d", err);
+		pr_err("PLL failed to lock: %d", err);
 		return err;
 	}
 
@@ -769,7 +769,7 @@
 		err = tegra_pcie_phy_enable(pcie);
 
 	if (err < 0) {
-		error("failed to power on PHY: %d\n", err);
+		pr_err("failed to power on PHY: %d\n", err);
 		return err;
 	}
 #endif
@@ -778,7 +778,7 @@
 #ifdef CONFIG_TEGRA186
 	err = reset_deassert(&pcie->reset_pcie_x);
 	if (err) {
-		error("reset_deassert(pcie_x) failed: %d\n", err);
+		pr_err("reset_deassert(pcie_x) failed: %d\n", err);
 		return err;
 	}
 #else
@@ -1143,25 +1143,25 @@
 
 	err = tegra_pcie_power_on(pcie);
 	if (err < 0) {
-		error("failed to power on");
+		pr_err("failed to power on");
 		return err;
 	}
 
 	err = tegra_pcie_enable_controller(pcie);
 	if (err < 0) {
-		error("failed to enable controller");
+		pr_err("failed to enable controller");
 		return err;
 	}
 
 	err = tegra_pcie_setup_translations(dev);
 	if (err < 0) {
-		error("failed to decode ranges");
+		pr_err("failed to decode ranges");
 		return err;
 	}
 
 	err = tegra_pcie_enable(pcie);
 	if (err < 0) {
-		error("failed to enable PCIe");
+		pr_err("failed to enable PCIe");
 		return err;
 	}
 
diff --git a/drivers/pci/pcie_xilinx.c b/drivers/pci/pcie_xilinx.c
index 4ba32df..6425825 100644
--- a/drivers/pci/pcie_xilinx.c
+++ b/drivers/pci/pcie_xilinx.c
@@ -187,7 +187,7 @@
 	err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
 			       0, &reg_res);
 	if (err < 0) {
-		error("\"reg\" resource not found\n");
+		pr_err("\"reg\" resource not found\n");
 		return err;
 	}
 
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 3ac405a..3718788 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -509,7 +509,7 @@
 				debug("Read from reg = %p - value = 0x%x\n",
 				      hpipe_addr + HPIPE_LANE_STATUS1_REG,
 				      data);
-				error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+				pr_err("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
 				ret = 0;
 			}
 		}
@@ -633,7 +633,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
-		error("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
+		pr_err("HPIPE_LANE_STATUS1_PCLK_EN_MASK is 0\n");
 		ret = 0;
 	}
 
@@ -666,14 +666,14 @@
 			gd->fdt_blob, sata_node, "marvell,armada-8k-ahci");
 
 	if (sata_node == 0) {
-		error("SATA node not found in FDT\n");
+		pr_err("SATA node not found in FDT\n");
 		return 0;
 	}
 
 	sata_base = (void __iomem *)fdtdec_get_addr_size_auto_noparent(
 		gd->fdt_blob, sata_node, "reg", 0, NULL, true);
 	if (sata_base == NULL) {
-		error("SATA address not found in FDT\n");
+		pr_err("SATA address not found in FDT\n");
 		return 0;
 	}
 
@@ -976,7 +976,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      hpipe_addr + HPIPE_LANE_STATUS1_REG, data);
-		error("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
+		pr_err("SD_EXTERNAL_STATUS0_PLL_TX is %d, SD_EXTERNAL_STATUS0_PLL_RX is %d\n",
 		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK),
 		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK));
 		ret = 0;
@@ -1099,7 +1099,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+		pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
 		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
 		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
 		ret = 0;
@@ -1117,7 +1117,7 @@
 	data = polling_with_timeout(addr, data, mask, 100);
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+		pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
 		ret = 0;
 	}
 
@@ -1398,7 +1398,7 @@
 	data = polling_with_timeout(addr, data, mask, 15000);
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n", sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+		pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
 		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
 		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
 		ret = 0;
@@ -1418,7 +1418,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+		pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
 		ret = 0;
 	}
 
@@ -1577,7 +1577,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
+		pr_err("SD_EXTERNAL_STATUS0_PLL_RX is %d, SD_EXTERNAL_STATUS0_PLL_TX is %d\n",
 		      (data & SD_EXTERNAL_STATUS0_PLL_RX_MASK),
 		      (data & SD_EXTERNAL_STATUS0_PLL_TX_MASK));
 		ret = 0;
@@ -1596,7 +1596,7 @@
 	if (data != 0) {
 		debug("Read from reg = %p - value = 0x%x\n",
 		      sd_ip_addr + SD_EXTERNAL_STATUS0_REG, data);
-		error("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
+		pr_err("SD_EXTERNAL_STATUS0_RX_INIT is 0\n");
 		ret = 0;
 	}
 
@@ -1742,7 +1742,7 @@
 	mask = data;
 	data = polling_with_timeout(addr, data, mask, 100);
 	if (data != 0) {
-		error("Impedance calibration is not done\n");
+		pr_err("Impedance calibration is not done\n");
 		debug("Read from reg = %p - value = 0x%x\n", addr, data);
 		ret = 0;
 	}
@@ -1751,7 +1751,7 @@
 	mask = data;
 	data = polling_with_timeout(addr, data, mask, 100);
 	if (data != 0) {
-		error("PLL calibration is not done\n");
+		pr_err("PLL calibration is not done\n");
 		debug("Read from reg = %p - value = 0x%x\n", addr, data);
 		ret = 0;
 	}
@@ -1761,7 +1761,7 @@
 	mask = data;
 	data = polling_with_timeout(addr, data, mask, 100);
 	if (data != 0) {
-		error("PLL is not ready\n");
+		pr_err("PLL is not ready\n");
 		debug("Read from reg = %p - value = 0x%x\n", addr, data);
 		ret = 0;
 	}
@@ -1818,7 +1818,7 @@
 					  cp110_utmi_data[i].usb_cfg_addr,
 					  cp110_utmi_data[i].utmi_cfg_addr,
 					  cp110_utmi_data[i].utmi_phy_port)) {
-			error("Failed to initialize UTMI PHY %d\n", i);
+			pr_err("Failed to initialize UTMI PHY %d\n", i);
 			continue;
 		}
 		printf("UTMI PHY %d initialized to ", i);
@@ -1864,7 +1864,7 @@
 			(void __iomem *)fdtdec_get_addr_size_auto_noparent(
 				gd->fdt_blob, node, "reg", 0, NULL, true);
 		if (cp110_utmi_data[i].utmi_base_addr == NULL) {
-			error("UTMI PHY base address is invalid\n");
+			pr_err("UTMI PHY base address is invalid\n");
 			i++;
 			continue;
 		}
@@ -1874,7 +1874,7 @@
 			(void __iomem *)fdtdec_get_addr_size_auto_noparent(
 				gd->fdt_blob, node, "reg", 1, NULL, true);
 		if (cp110_utmi_data[i].usb_cfg_addr == NULL) {
-			error("UTMI PHY base address is invalid\n");
+			pr_err("UTMI PHY base address is invalid\n");
 			i++;
 			continue;
 		}
@@ -1884,7 +1884,7 @@
 			(void __iomem *)fdtdec_get_addr_size_auto_noparent(
 				gd->fdt_blob, node, "reg", 2, NULL, true);
 		if (cp110_utmi_data[i].utmi_cfg_addr == NULL) {
-			error("UTMI PHY base address is invalid\n");
+			pr_err("UTMI PHY base address is invalid\n");
 			i++;
 			continue;
 		}
@@ -1896,7 +1896,7 @@
 		cp110_utmi_data[i].utmi_phy_port = fdtdec_get_int(
 			gd->fdt_blob, node, "utmi-port", UTMI_PHY_INVALID);
 		if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_INVALID) {
-			error("UTMI PHY port type is invalid\n");
+			pr_err("UTMI PHY port type is invalid\n");
 			i++;
 			continue;
 		}
@@ -2049,7 +2049,7 @@
 			 * PHY_TYPE_UNCONNECTED state.
 			 */
 			ptr_comphy_map->type = PHY_TYPE_UNCONNECTED;
-			error("PLL is not locked - Failed to initialize lane %d\n",
+			pr_err("PLL is not locked - Failed to initialize lane %d\n",
 			      lane);
 		}
 	}
diff --git a/drivers/phy/sti_usb_phy.c b/drivers/phy/sti_usb_phy.c
index 0e0b1c0..88fcfbb 100644
--- a/drivers/phy/sti_usb_phy.c
+++ b/drivers/phy/sti_usb_phy.c
@@ -47,13 +47,13 @@
 
 	ret = reset_deassert(&phy->global_ctl);
 	if (ret < 0) {
-		error("PHY global deassert failed: %d", ret);
+		pr_err("PHY global deassert failed: %d", ret);
 		return ret;
 	}
 
 	ret = reset_deassert(&phy->port_ctl);
 	if (ret < 0)
-		error("PHY port deassert failed: %d", ret);
+		pr_err("PHY port deassert failed: %d", ret);
 
 	return ret;
 }
@@ -85,13 +85,13 @@
 
 	ret = reset_assert(&phy->port_ctl);
 	if (ret < 0) {
-		error("PHY port assert failed: %d", ret);
+		pr_err("PHY port assert failed: %d", ret);
 		return ret;
 	}
 
 	ret = reset_assert(&phy->global_ctl);
 	if (ret < 0)
-		error("PHY global assert failed: %d", ret);
+		pr_err("PHY global assert failed: %d", ret);
 
 	return ret;
 }
@@ -114,20 +114,20 @@
 					 &syscfg_phandle);
 
 	if (ret < 0) {
-		error("Can't get syscfg phandle: %d\n", ret);
+		pr_err("Can't get syscfg phandle: %d\n", ret);
 		return ret;
 	}
 
 	ret = uclass_get_device_by_ofnode(UCLASS_SYSCON, syscfg_phandle.node,
 					  &syscon);
 	if (ret) {
-		error("unable to find syscon device (%d)\n", ret);
+		pr_err("unable to find syscon device (%d)\n", ret);
 		return ret;
 	}
 
 	priv->regmap = syscon_get_regmap(syscon);
 	if (!priv->regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
@@ -137,12 +137,12 @@
 					   ARRAY_SIZE(cells));
 
 	if (count < 0) {
-		error("Bad PHY st,syscfg property %d\n", count);
+		pr_err("Bad PHY st,syscfg property %d\n", count);
 		return -EINVAL;
 	}
 
 	if (count > PHYPARAM_NB) {
-		error("Unsupported PHY param count %d\n", count);
+		pr_err("Unsupported PHY param count %d\n", count);
 		return -EINVAL;
 	}
 
@@ -152,14 +152,14 @@
 	/* get global reset control */
 	ret = reset_get_by_name(dev, "global", &priv->global_ctl);
 	if (ret) {
-		error("can't get global reset for %s (%d)", dev->name, ret);
+		pr_err("can't get global reset for %s (%d)", dev->name, ret);
 		return ret;
 	}
 
 	/* get port reset control */
 	ret = reset_get_by_name(dev, "port", &priv->port_ctl);
 	if (ret) {
-		error("can't get port reset for %s (%d)", dev->name, ret);
+		pr_err("can't get port reset for %s (%d)", dev->name, ret);
 		return ret;
 	}
 
diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c
index 680e32f..babf2ff 100644
--- a/drivers/phy/ti-pipe3-phy.c
+++ b/drivers/phy/ti-pipe3-phy.c
@@ -261,7 +261,7 @@
 	} while (--timeout);
 
 	if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
-		error("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+		pr_err("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
 		      __func__, val);
 		return -EBUSY;
 	}
@@ -284,14 +284,14 @@
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   name, &syscon);
 	if (err) {
-		error("unable to find syscon device for %s (%d)\n",
+		pr_err("unable to find syscon device for %s (%d)\n",
 		      name, err);
 		return NULL;
 	}
 
 	regmap = syscon_get_regmap(syscon);
 	if (IS_ERR(regmap)) {
-		error("unable to find regmap for %s (%ld)\n",
+		pr_err("unable to find regmap for %s (%ld)\n",
 		      name, PTR_ERR(regmap));
 		return NULL;
 	}
@@ -299,7 +299,7 @@
 	cell = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), name,
 			   &len);
 	if (len < 2*sizeof(fdt32_t)) {
-		error("offset not available for %s\n", name);
+		pr_err("offset not available for %s\n", name);
 		return NULL;
 	}
 
@@ -318,13 +318,13 @@
 
 	addr = devfdt_get_addr_size_index(dev, 2, &sz);
 	if (addr == FDT_ADDR_T_NONE) {
-		error("missing pll ctrl address\n");
+		pr_err("missing pll ctrl address\n");
 		return -EINVAL;
 	}
 
 	pipe3->pll_ctrl_base = map_physmem(addr, sz, MAP_NOCACHE);
 	if (!pipe3->pll_ctrl_base) {
-		error("unable to remap pll ctrl\n");
+		pr_err("unable to remap pll ctrl\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index 27165b0..2bf853e 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -578,7 +578,7 @@
 
 	info->base = (void __iomem *)devfdt_get_addr(dev);
 	if (!info->base) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/pinctrl/pinctrl-sti.c b/drivers/pinctrl/pinctrl-sti.c
index 40341b4..735e412 100644
--- a/drivers/pinctrl/pinctrl-sti.c
+++ b/drivers/pinctrl/pinctrl-sti.c
@@ -142,7 +142,7 @@
 		break;
 
 	default:
-		error("%s invalid direction value: 0x%x\n",
+		pr_err("%s invalid direction value: 0x%x\n",
 		      __func__, pin_desc->dir);
 		BUG();
 		break;
@@ -237,14 +237,14 @@
 						     prop_name, "#gpio-cells",
 						     0, 0, &args);
 		if (ret < 0) {
-			error("Can't get the gpio bank phandle: %d\n", ret);
+			pr_err("Can't get the gpio bank phandle: %d\n", ret);
 			return ret;
 		}
 
 		bank_name = fdt_getprop(blob, args.node, "st,bank-name",
 					&count);
 		if (count < 0) {
-			error("Can't find bank-name property %d\n", count);
+			pr_err("Can't find bank-name property %d\n", count);
 			return -EINVAL;
 		}
 
@@ -254,12 +254,12 @@
 						   prop_name, cells,
 						   ARRAY_SIZE(cells));
 		if (count < 0) {
-			error("Bad pin configuration array %d\n", count);
+			pr_err("Bad pin configuration array %d\n", count);
 			return -EINVAL;
 		}
 
 		if (count > MAX_STI_PINCONF_ENTRIES) {
-			error("Unsupported pinconf array count %d\n", count);
+			pr_err("Unsupported pinconf array count %d\n", count);
 			return -EINVAL;
 		}
 
@@ -284,13 +284,13 @@
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   "st,syscfg", &syscon);
 	if (err) {
-		error("unable to find syscon device\n");
+		pr_err("unable to find syscon device\n");
 		return err;
 	}
 
 	plat->regmap = syscon_get_regmap(syscon);
 	if (!plat->regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c
index bf2a86c..51fdfb3 100644
--- a/drivers/pinctrl/pinctrl_stm32.c
+++ b/drivers/pinctrl/pinctrl_stm32.c
@@ -160,7 +160,7 @@
 
 		config_node = fdt_node_offset_by_phandle(fdt, phandle);
 		if (config_node < 0) {
-			error("prop pinctrl-0 index %d invalid phandle\n", i);
+			pr_err("prop pinctrl-0 index %d invalid phandle\n", i);
 			return -EINVAL;
 		}
 
diff --git a/drivers/power/pmic/as3722.c b/drivers/power/pmic/as3722.c
index 4efe8ee..3b0427e 100644
--- a/drivers/power/pmic/as3722.c
+++ b/drivers/power/pmic/as3722.c
@@ -46,14 +46,14 @@
 
 	ret = pmic_reg_read(dev, AS3722_ASIC_ID1);
 	if (ret < 0) {
-		error("failed to read ID1 register: %d", ret);
+		pr_err("failed to read ID1 register: %d", ret);
 		return ret;
 	}
 	*idp = ret;
 
 	ret = pmic_reg_read(dev, AS3722_ASIC_ID2);
 	if (ret < 0) {
-		error("failed to read ID2 register: %d", ret);
+		pr_err("failed to read ID2 register: %d", ret);
 		return ret;
 	}
 	*revisionp = ret;
@@ -71,7 +71,7 @@
 
 	ret = pmic_reg_write(dev, AS3722_SD_VOLTAGE(sd), value);
 	if (ret < 0) {
-		error("failed to write SD%u voltage register: %d", sd, ret);
+		pr_err("failed to write SD%u voltage register: %d", sd, ret);
 		return ret;
 	}
 
@@ -87,7 +87,7 @@
 
 	ret = pmic_reg_write(dev, AS3722_LDO_VOLTAGE(ldo), value);
 	if (ret < 0) {
-		error("failed to write LDO%u voltage register: %d", ldo,
+		pr_err("failed to write LDO%u voltage register: %d", ldo,
 		      ret);
 		return ret;
 	}
@@ -102,12 +102,12 @@
 
 	ret = as3722_read_id(dev, &id, &revision);
 	if (ret < 0) {
-		error("failed to read ID: %d", ret);
+		pr_err("failed to read ID: %d", ret);
 		return ret;
 	}
 
 	if (id != AS3722_DEVICE_ID) {
-		error("unknown device");
+		pr_err("unknown device");
 		return -ENOENT;
 	}
 
diff --git a/drivers/power/pmic/as3722_gpio.c b/drivers/power/pmic/as3722_gpio.c
index d0b681c..5cf4cb6 100644
--- a/drivers/power/pmic/as3722_gpio.c
+++ b/drivers/power/pmic/as3722_gpio.c
@@ -26,7 +26,7 @@
 
 	err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
 	if (err) {
-		error("failed to configure GPIO#%u: %d", gpio, err);
+		pr_err("failed to configure GPIO#%u: %d", gpio, err);
 		return err;
 	}
 
@@ -46,7 +46,7 @@
 
 	err = pmic_reg_read(pmic, AS3722_GPIO_SIGNAL_OUT);
 	if (err < 0) {
-		error("failed to read GPIO signal out register: %d", err);
+		pr_err("failed to read GPIO signal out register: %d", err);
 		return err;
 	}
 	value = err;
@@ -61,7 +61,7 @@
 
 	err = pmic_reg_write(pmic, AS3722_GPIO_SIGNAL_OUT, value);
 	if (err) {
-		error("failed to set GPIO#%u %s: %d", gpio, l, err);
+		pr_err("failed to set GPIO#%u %s: %d", gpio, l, err);
 		return err;
 	}
 
@@ -84,13 +84,13 @@
 
 	err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
 	if (err) {
-		error("failed to configure GPIO#%u as output: %d", gpio, err);
+		pr_err("failed to configure GPIO#%u as output: %d", gpio, err);
 		return err;
 	}
 
 	err = as3722_gpio_set_value(pmic, gpio, value);
 	if (err < 0) {
-		error("failed to set GPIO#%u high: %d", gpio, err);
+		pr_err("failed to set GPIO#%u high: %d", gpio, err);
 		return err;
 	}
 
diff --git a/drivers/power/pmic/i2c_pmic_emul.c b/drivers/power/pmic/i2c_pmic_emul.c
index 2d35d09..38a2a04 100644
--- a/drivers/power/pmic/i2c_pmic_emul.c
+++ b/drivers/power/pmic/i2c_pmic_emul.c
@@ -31,7 +31,7 @@
 	struct sandbox_i2c_pmic_plat_data *plat = dev_get_platdata(emul);
 
 	if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
-		error("Request exceeds PMIC register range! Max register: %#x",
+		pr_err("Request exceeds PMIC register range! Max register: %#x",
 		      SANDBOX_PMIC_REG_COUNT);
 		return -EFAULT;
 	}
@@ -68,7 +68,7 @@
 	len--;
 
 	if (plat->rw_reg + len > SANDBOX_PMIC_REG_COUNT) {
-		error("Request exceeds PMIC register range! Max register: %#x",
+		pr_err("Request exceeds PMIC register range! Max register: %#x",
 		      SANDBOX_PMIC_REG_COUNT);
 	}
 
@@ -111,7 +111,7 @@
 					     SANDBOX_PMIC_REG_COUNT);
 
 	if (!reg_defaults) {
-		error("Property \"reg-defaults\" not found for device: %s!",
+		pr_err("Property \"reg-defaults\" not found for device: %s!",
 		      emul->name);
 		return -EINVAL;
 	}
diff --git a/drivers/power/pmic/lp873x.c b/drivers/power/pmic/lp873x.c
index f505468..95c2b7e 100644
--- a/drivers/power/pmic/lp873x.c
+++ b/drivers/power/pmic/lp873x.c
@@ -27,7 +27,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -37,7 +37,7 @@
 static int lp873x_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
diff --git a/drivers/power/pmic/lp87565.c b/drivers/power/pmic/lp87565.c
index 782a46c..506769e 100644
--- a/drivers/power/pmic/lp87565.c
+++ b/drivers/power/pmic/lp87565.c
@@ -29,7 +29,7 @@
 
 	ret = dm_i2c_write(dev, reg, buff, len);
 	if (ret)
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
@@ -40,7 +40,7 @@
 
 	ret = dm_i2c_read(dev, reg, buff, len);
 	if (ret)
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
diff --git a/drivers/power/pmic/max77686.c b/drivers/power/pmic/max77686.c
index ceca9f9..b3ed849 100644
--- a/drivers/power/pmic/max77686.c
+++ b/drivers/power/pmic/max77686.c
@@ -31,7 +31,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -41,7 +41,7 @@
 static int max77686_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
diff --git a/drivers/power/pmic/max8997.c b/drivers/power/pmic/max8997.c
index f749d7d..5ebeb8a 100644
--- a/drivers/power/pmic/max8997.c
+++ b/drivers/power/pmic/max8997.c
@@ -26,7 +26,7 @@
 
 	ret = dm_i2c_write(dev, reg, buff, len);
 	if (ret)
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
@@ -37,7 +37,7 @@
 
 	ret = dm_i2c_read(dev, reg, buff, len);
 	if (ret)
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
diff --git a/drivers/power/pmic/max8998.c b/drivers/power/pmic/max8998.c
index 7c4773c..a7e0469 100644
--- a/drivers/power/pmic/max8998.c
+++ b/drivers/power/pmic/max8998.c
@@ -26,7 +26,7 @@
 
 	ret = dm_i2c_write(dev, reg, buff, len);
 	if (ret)
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
@@ -37,7 +37,7 @@
 
 	ret = dm_i2c_read(dev, reg, buff, len);
 	if (ret)
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
diff --git a/drivers/power/pmic/palmas.c b/drivers/power/pmic/palmas.c
index 804c0d1..1e1ecb3 100644
--- a/drivers/power/pmic/palmas.c
+++ b/drivers/power/pmic/palmas.c
@@ -27,7 +27,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -37,7 +37,7 @@
 static int palmas_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c
index 5f361c7..a06cbc0 100644
--- a/drivers/power/pmic/pfuze100.c
+++ b/drivers/power/pmic/pfuze100.c
@@ -33,7 +33,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -43,7 +43,7 @@
 static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
diff --git a/drivers/power/pmic/s2mps11.c b/drivers/power/pmic/s2mps11.c
index 9d83059..522105e 100644
--- a/drivers/power/pmic/s2mps11.c
+++ b/drivers/power/pmic/s2mps11.c
@@ -27,7 +27,7 @@
 
 	ret = dm_i2c_write(dev, reg, buff, len);
 	if (ret)
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
@@ -38,7 +38,7 @@
 
 	ret = dm_i2c_read(dev, reg, buff, len);
 	if (ret)
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 
 	return ret;
 }
diff --git a/drivers/power/pmic/s5m8767.c b/drivers/power/pmic/s5m8767.c
index f8ae5ea..3812e24 100644
--- a/drivers/power/pmic/s5m8767.c
+++ b/drivers/power/pmic/s5m8767.c
@@ -30,7 +30,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -40,7 +40,7 @@
 static int s5m8767_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
diff --git a/drivers/power/pmic/sandbox.c b/drivers/power/pmic/sandbox.c
index 6763303..e8d6fac 100644
--- a/drivers/power/pmic/sandbox.c
+++ b/drivers/power/pmic/sandbox.c
@@ -31,7 +31,7 @@
 			      const uint8_t *buff, int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -42,7 +42,7 @@
 			     uint8_t *buff, int len)
 {
 	if (dm_i2c_read(dev, reg, buff, len)) {
-		error("read error from device: %p register: %#x!", dev, reg);
+		pr_err("read error from device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -52,7 +52,7 @@
 static int sandbox_pmic_bind(struct udevice *dev)
 {
 	if (!pmic_bind_children(dev, dev_ofnode(dev), pmic_children_info))
-		error("%s:%d PMIC: %s - no child found!", __func__, __LINE__,
+		pr_err("%s:%d PMIC: %s - no child found!", __func__, __LINE__,
 							  dev->name);
 
 	/* Always return success for this device - allows for PMIC I/O */
diff --git a/drivers/power/pmic/tps65090.c b/drivers/power/pmic/tps65090.c
index 4565e3b..ee5358b 100644
--- a/drivers/power/pmic/tps65090.c
+++ b/drivers/power/pmic/tps65090.c
@@ -29,7 +29,7 @@
 			  int len)
 {
 	if (dm_i2c_write(dev, reg, buff, len)) {
-		error("write error to device: %p register: %#x!", dev, reg);
+		pr_err("write error to device: %p register: %#x!", dev, reg);
 		return -EIO;
 	}
 
@@ -42,7 +42,7 @@
 
 	ret = dm_i2c_read(dev, reg, buff, len);
 	if (ret) {
-		error("read error %d from device: %p register: %#x!", ret, dev,
+		pr_err("read error %d from device: %p register: %#x!", ret, dev,
 		      reg);
 		return -EIO;
 	}
diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c
index 35c2922..97b4a98 100644
--- a/drivers/power/regulator/fixed.c
+++ b/drivers/power/regulator/fixed.c
@@ -117,7 +117,7 @@
 
 	ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
 	if (ret) {
-		error("Can't set regulator : %s gpio to: %d\n", dev->name,
+		pr_err("Can't set regulator : %s gpio to: %d\n", dev->name,
 		      enable);
 		return ret;
 	}
diff --git a/drivers/power/regulator/gpio-regulator.c b/drivers/power/regulator/gpio-regulator.c
index 42391c6..1031a03 100644
--- a/drivers/power/regulator/gpio-regulator.c
+++ b/drivers/power/regulator/gpio-regulator.c
@@ -109,7 +109,7 @@
 
 	ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
 	if (ret) {
-		error("Can't set regulator : %s gpio to: %d\n", dev->name,
+		pr_err("Can't set regulator : %s gpio to: %d\n", dev->name,
 		      enable);
 		return ret;
 	}
diff --git a/drivers/power/regulator/max77686.c b/drivers/power/regulator/max77686.c
index 8780806..2212d36 100644
--- a/drivers/power/regulator/max77686.c
+++ b/drivers/power/regulator/max77686.c
@@ -98,7 +98,7 @@
 	if (hex >= 0 && hex <= hex_max)
 		return hex;
 
-	error("Value: %d uV is wrong for BUCK%d", uV, buck);
+	pr_err("Value: %d uV is wrong for BUCK%d", uV, buck);
 	return -EINVAL;
 }
 
@@ -134,7 +134,7 @@
 	return uV;
 
 bad_hex:
-	error("Value: %#x is wrong for BUCK%d", hex, buck);
+	pr_err("Value: %#x is wrong for BUCK%d", hex, buck);
 	return -EINVAL;
 }
 
@@ -160,7 +160,7 @@
 	if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
 		return hex;
 
-	error("Value: %d uV is wrong for LDO%d", uV, ldo);
+	pr_err("Value: %d uV is wrong for LDO%d", uV, ldo);
 	return -EINVAL;
 }
 
@@ -189,7 +189,7 @@
 	return uV;
 
 bad_hex:
-	error("Value: %#x is wrong for ldo%d", hex, ldo);
+	pr_err("Value: %#x is wrong for ldo%d", hex, ldo);
 	return -EINVAL;
 }
 
@@ -328,7 +328,7 @@
 
 	ldo = dev->driver_data;
 	if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
-		error("Wrong ldo number: %d", ldo);
+		pr_err("Wrong ldo number: %d", ldo);
 		return -EINVAL;
 	}
 
@@ -366,7 +366,7 @@
 
 	buck = dev->driver_data;
 	if (buck < 1 || buck > MAX77686_BUCK_NUM) {
-		error("Wrong buck number: %d", buck);
+		pr_err("Wrong buck number: %d", buck);
 		return -EINVAL;
 	}
 
@@ -423,7 +423,7 @@
 
 	ldo = dev->driver_data;
 	if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
-		error("Wrong ldo number: %d", ldo);
+		pr_err("Wrong ldo number: %d", ldo);
 		return -EINVAL;
 	}
 
@@ -493,7 +493,7 @@
 	}
 
 	if (mode == 0xff) {
-		error("Wrong mode: %d for ldo%d", *opmode, ldo);
+		pr_err("Wrong mode: %d for ldo%d", *opmode, ldo);
 		return -EINVAL;
 	}
 
@@ -545,7 +545,7 @@
 
 	buck = dev->driver_data;
 	if (buck < 1 || buck > MAX77686_BUCK_NUM) {
-		error("Wrong buck number: %d", buck);
+		pr_err("Wrong buck number: %d", buck);
 		return -EINVAL;
 	}
 
@@ -614,7 +614,7 @@
 	}
 
 	if (mode == 0xff) {
-		error("Wrong mode: %d for buck: %d\n", *opmode, buck);
+		pr_err("Wrong mode: %d for buck: %d\n", *opmode, buck);
 		return -EINVAL;
 	}
 
diff --git a/drivers/power/regulator/pbias_regulator.c b/drivers/power/regulator/pbias_regulator.c
index 914500b..116b7f4 100644
--- a/drivers/power/regulator/pbias_regulator.c
+++ b/drivers/power/regulator/pbias_regulator.c
@@ -70,14 +70,14 @@
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   "syscon", &syscon);
 	if (err) {
-		error("%s: unable to find syscon device (%d)\n", __func__,
+		pr_err("%s: unable to find syscon device (%d)\n", __func__,
 		      err);
 		return err;
 	}
 
 	regmap = syscon_get_regmap(syscon);
 	if (IS_ERR(regmap)) {
-		error("%s: unable to find regmap (%ld)\n", __func__,
+		pr_err("%s: unable to find regmap (%ld)\n", __func__,
 		      PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
@@ -85,7 +85,7 @@
 
 	err = dev_read_resource(dev, 0, &res);
 	if (err) {
-		error("%s: unable to find offset (%d)\n", __func__, err);
+		pr_err("%s: unable to find offset (%d)\n", __func__, err);
 		return err;
 	}
 	priv->offset = res.start;
diff --git a/drivers/power/regulator/sandbox.c b/drivers/power/regulator/sandbox.c
index 06c09fd..f980a17 100644
--- a/drivers/power/regulator/sandbox.c
+++ b/drivers/power/regulator/sandbox.c
@@ -87,7 +87,7 @@
 	int ret;
 
 	if (dev->driver_data > output_count) {
-		error("Unknown regulator number: %lu for PMIC %s!",
+		pr_err("Unknown regulator number: %lu for PMIC %s!",
 		      dev->driver_data, dev->name);
 		return -EINVAL;
 	}
@@ -95,7 +95,7 @@
 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
 	ret = pmic_read(dev->parent, reg, &reg_val, 1);
 	if (ret) {
-		error("PMIC read failed: %d\n",  ret);
+		pr_err("PMIC read failed: %d\n",  ret);
 		return ret;
 	}
 
@@ -115,14 +115,14 @@
 	int max_value;
 
 	if (dev->driver_data > output_count) {
-		error("Unknown regulator number: %lu for PMIC %s!",
+		pr_err("Unknown regulator number: %lu for PMIC %s!",
 		      dev->driver_data, dev->name);
 		return -EINVAL;
 	}
 
 	max_value = range[dev->driver_data - 1].max;
 	if (value > max_value) {
-		error("Wrong value for %s: %lu. Max is: %d.",
+		pr_err("Wrong value for %s: %lu. Max is: %d.",
 		      dev->name, dev->driver_data, max_value);
 		return -EINVAL;
 	}
@@ -134,7 +134,7 @@
 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + reg_type;
 	ret = pmic_write(dev->parent, reg, &reg_val, 1);
 	if (ret) {
-		error("PMIC write failed: %d\n",  ret);
+		pr_err("PMIC write failed: %d\n",  ret);
 		return ret;
 	}
 
@@ -154,7 +154,7 @@
 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
 	ret = pmic_read(dev->parent, reg, &reg_val, 1);
 	if (ret) {
-		error("PMIC read failed: %d\n",  ret);
+		pr_err("PMIC read failed: %d\n",  ret);
 		return ret;
 	}
 
@@ -163,7 +163,7 @@
 			return uc_pdata->mode[i].id;
 	}
 
-	error("Unknown operation mode for %s!", dev->name);
+	pr_err("Unknown operation mode for %s!", dev->name);
 	return -EINVAL;
 }
 
@@ -188,14 +188,14 @@
 	}
 
 	if (reg_val == -1) {
-		error("Unknown operation mode for %s!", dev->name);
+		pr_err("Unknown operation mode for %s!", dev->name);
 		return -EINVAL;
 	}
 
 	reg = (dev->driver_data - 1) * OUT_REG_COUNT + OUT_REG_OM;
 	ret = pmic_write(dev->parent, reg, (uint8_t *)&reg_val, 1);
 	if (ret) {
-		error("PMIC write failed: %d\n",  ret);
+		pr_err("PMIC write failed: %d\n",  ret);
 		return ret;
 	}
 
diff --git a/drivers/ram/rockchip/dmc-rk3368.c b/drivers/ram/rockchip/dmc-rk3368.c
index 7577ff0..bfcb1dd 100644
--- a/drivers/ram/rockchip/dmc-rk3368.c
+++ b/drivers/ram/rockchip/dmc-rk3368.c
@@ -230,7 +230,7 @@
 	tmp = get_timer(0);
 	do {
 		if (get_timer(tmp) > timeout_ms) {
-			error("%s: POWER_UP_START did not complete in %ld ms\n",
+			pr_err("%s: POWER_UP_START did not complete in %ld ms\n",
 			      __func__, timeout_ms);
 			return -ETIME;
 		}
@@ -422,7 +422,7 @@
 	tmp = get_timer(0);
 	do {
 		if (get_timer(tmp) > timeout_ms) {
-			error("%s: DFI init did not complete within %ld ms\n",
+			pr_err("%s: DFI init did not complete within %ld ms\n",
 			      __func__, timeout_ms);
 			return -ETIME;
 		}
@@ -457,7 +457,7 @@
 	u32 tfaw_as_ps;
 
 	if (params->ddr_speed_bin != DDR3_1600K) {
-		error("%s: unimplemented DDR3 speed bin %d\n",
+		pr_err("%s: unimplemented DDR3 speed bin %d\n",
 		      __func__, params->ddr_speed_bin);
 		return -1;
 	}
@@ -585,7 +585,7 @@
 	tmp = get_timer(0);
 	do {
 		if (get_timer(tmp) > timeout_ms) {
-			error("%s: did not complete within %ld ms\n",
+			pr_err("%s: did not complete within %ld ms\n",
 			      __func__, timeout_ms);
 			return -ETIME;
 		}
@@ -625,7 +625,7 @@
 	}
 
 	if (col == 8) {
-		error("%s: col detect error\n", __func__);
+		pr_err("%s: col detect error\n", __func__);
 		return -EINVAL;
 	}
 
@@ -644,7 +644,7 @@
 	}
 
 	if (row == 11) {
-		error("%s: row detect error\n", __func__);
+		pr_err("%s: row detect error\n", __func__);
 		return -EINVAL;
 	}
 
@@ -764,7 +764,7 @@
 		}
 	}
 
-	error("%s: ddrconf (NIU config) not found\n", __func__);
+	pr_err("%s: ddrconf (NIU config) not found\n", __func__);
 	return -EINVAL;
 }
 
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 5ed4b03..76c1fe8 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -551,7 +551,7 @@
 	tmp = get_timer(0);
 	do {
 		if (get_timer(tmp) > timeout_ms) {
-			error("DRAM (%s): phy failed to lock within  %ld ms\n",
+			pr_err("DRAM (%s): phy failed to lock within  %ld ms\n",
 			      __func__, timeout_ms);
 			return -ETIME;
 		}
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index b1b0289..fdf088e 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -262,7 +262,7 @@
 		bank_name = (char *)ofnode_get_name(bank_node);
 		strsep(&bank_name, "@");
 		if (!bank_name) {
-			error("missing sdram bank index");
+			pr_err("missing sdram bank index");
 			return -EINVAL;
 		}
 
@@ -271,7 +271,7 @@
 			       (long unsigned int *)&bank_params->target_bank);
 
 		if (bank_params->target_bank >= MAX_SDRAM_BANK) {
-			error("Found bank %d , but only bank 0 and 1 are supported",
+			pr_err("Found bank %d , but only bank 0 and 1 are supported",
 			      bank_params->target_bank);
 			return -EINVAL;
 		}
@@ -285,7 +285,7 @@
 						  sizeof(struct stm32_sdram_control));
 
 		if (!params->bank_params[bank].sdram_control) {
-			error("st,sdram-control not found for %s",
+			pr_err("st,sdram-control not found for %s",
 			      ofnode_get_name(bank_node));
 			return -EINVAL;
 		}
@@ -298,7 +298,7 @@
 						  sizeof(struct stm32_sdram_timing));
 
 		if (!params->bank_params[bank].sdram_timing) {
-			error("st,sdram-timing not found for %s",
+			pr_err("st,sdram-timing not found for %s",
 			      ofnode_get_name(bank_node));
 			return -EINVAL;
 		}
diff --git a/drivers/reset/sti-reset.c b/drivers/reset/sti-reset.c
index a79708c..024b996 100644
--- a/drivers/reset/sti-reset.c
+++ b/drivers/reset/sti-reset.c
@@ -201,20 +201,20 @@
 	node = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
 					     compatible);
 	if (node < 0) {
-		error("unable to find %s node\n", compatible);
+		pr_err("unable to find %s node\n", compatible);
 		return node;
 	}
 
 	ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, node, &syscon);
 	if (ret) {
-		error("%s: uclass_get_device_by_of_offset failed: %d\n",
+		pr_err("%s: uclass_get_device_by_of_offset failed: %d\n",
 		      __func__, ret);
 		return ret;
 	}
 
 	regmap = syscon_get_regmap(syscon);
 	if (!regmap) {
-		error("unable to get regmap for %s\n", syscon->name);
+		pr_err("unable to get regmap for %s\n", syscon->name);
 		return -ENODEV;
 	}
 
@@ -251,7 +251,7 @@
 			if (ch->deassert_cnt > 0)
 				return 0;
 		} else
-			error("Reset balancing error: reset_ctl=%p dev=%p id=%lu\n",
+			pr_err("Reset balancing error: reset_ctl=%p dev=%p id=%lu\n",
 			      reset_ctl, reset_ctl->dev, reset_ctl->id);
 	}
 
@@ -268,7 +268,7 @@
 	reg = (void __iomem *)base + ch->ack_offset;
 	if (wait_for_bit(__func__, reg, BIT(ch->ack_bit), ctrl_val,
 			 1000, false)) {
-		error("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
+		pr_err("Stuck on waiting ack reset_ctl=%p dev=%p id=%lu\n",
 		      reset_ctl, reset_ctl->dev, reset_ctl->id);
 
 		return -ETIMEDOUT;
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index e2f8342..228e714 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -474,7 +474,7 @@
 	ret = gpio_request_list_by_name(bus, "cs-gpios", priv->cs_gpios,
 					ARRAY_SIZE(priv->cs_gpios), 0);
 	if (ret < 0) {
-		error("Can't get %s gpios! Error: %d", bus->name, ret);
+		pr_err("Can't get %s gpios! Error: %d", bus->name, ret);
 		return ret;
 	}
 
diff --git a/drivers/spi/lpc32xx_ssp.c b/drivers/spi/lpc32xx_ssp.c
index c5b766c..e2a593b 100644
--- a/drivers/spi/lpc32xx_ssp.c
+++ b/drivers/spi/lpc32xx_ssp.c
@@ -66,17 +66,17 @@
 	/* we only set up SSP0 for now, so ignore bus */
 
 	if (mode & SPI_3WIRE) {
-		error("3-wire mode not supported");
+		pr_err("3-wire mode not supported");
 		return NULL;
 	}
 
 	if (mode & SPI_SLAVE) {
-		error("slave mode not supported\n");
+		pr_err("slave mode not supported\n");
 		return NULL;
 	}
 
 	if (mode & SPI_PREAMBLE) {
-		error("preamble byte skipping not supported\n");
+		pr_err("preamble byte skipping not supported\n");
 		return NULL;
 	}
 
diff --git a/drivers/sysreset/sysreset_sti.c b/drivers/sysreset/sysreset_sti.c
index 9b58aa8..bf698a7 100644
--- a/drivers/sysreset/sysreset_sti.c
+++ b/drivers/sysreset/sysreset_sti.c
@@ -39,7 +39,7 @@
 					     "st,syscfg", NULL, 0, 0,
 					     &syscfg_phandle);
 	if (ret < 0) {
-		error("Can't get syscfg phandle: %d\n", ret);
+		pr_err("Can't get syscfg phandle: %d\n", ret);
 		return ret;
 	}
 
@@ -47,14 +47,14 @@
 					     syscfg_phandle.node,
 					     &syscon);
 	if (ret) {
-		error("%s: uclass_get_device_by_of_offset failed: %d\n",
+		pr_err("%s: uclass_get_device_by_of_offset failed: %d\n",
 		      __func__, ret);
 		return ret;
 	}
 
 	regmap = syscon_get_regmap(syscon);
 	if (!regmap) {
-		error("unable to get regmap for %s\n", syscon->name);
+		pr_err("unable to get regmap for %s\n", syscon->name);
 		return -ENODEV;
 	}
 
diff --git a/drivers/sysreset/sysreset_syscon.c b/drivers/sysreset/sysreset_syscon.c
index 3818fae..3abce7f 100644
--- a/drivers/sysreset/sysreset_syscon.c
+++ b/drivers/sysreset/sysreset_syscon.c
@@ -45,13 +45,13 @@
 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
 					   "regmap", &syscon);
 	if (err) {
-		error("unable to find syscon device\n");
+		pr_err("unable to find syscon device\n");
 		return err;
 	}
 
 	priv->regmap = syscon_get_regmap(syscon);
 	if (!priv->regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/sysreset/sysreset_watchdog.c b/drivers/sysreset/sysreset_watchdog.c
index 304ed05..ab250ae 100644
--- a/drivers/sysreset/sysreset_watchdog.c
+++ b/drivers/sysreset/sysreset_watchdog.c
@@ -38,7 +38,7 @@
 	err = uclass_get_device_by_phandle(UCLASS_WDT, dev,
 					   "wdt", &priv->wdt);
 	if (err) {
-		error("unable to find wdt device\n");
+		pr_err("unable to find wdt device\n");
 		return err;
 	}
 
diff --git a/drivers/tpm/tpm_tis_infineon.c b/drivers/tpm/tpm_tis_infineon.c
index ef3ff0d..e3e20d8 100644
--- a/drivers/tpm/tpm_tis_infineon.c
+++ b/drivers/tpm/tpm_tis_infineon.c
@@ -539,7 +539,7 @@
 	}
 
 	if (chip->chip_type != UNKNOWN && vendor != expected_did_vid) {
-		error("Vendor id did not match! ID was %08x\n", vendor);
+		pr_err("Vendor id did not match! ID was %08x\n", vendor);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 35c2dc1..e8432bb 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -28,7 +28,7 @@
 
 	dr_mode = fdt_getprop(fdt, node, "dr_mode", NULL);
 	if (!dr_mode) {
-		error("usb dr_mode not found\n");
+		pr_err("usb dr_mode not found\n");
 		return USB_DR_MODE_UNKNOWN;
 	}
 
diff --git a/drivers/usb/eth/mcs7830.c b/drivers/usb/eth/mcs7830.c
index 4abef5d..941d612 100644
--- a/drivers/usb/eth/mcs7830.c
+++ b/drivers/usb/eth/mcs7830.c
@@ -418,25 +418,25 @@
 
 	rc = mcs7830_set_autoneg(udev);
 	if (rc < 0) {
-		error("setting autoneg failed\n");
+		pr_err("setting autoneg failed\n");
 		return rc;
 	}
 
 	rc = mcs7830_write_mchash(udev, priv);
 	if (rc < 0) {
-		error("failed to set multicast hash\n");
+		pr_err("failed to set multicast hash\n");
 		return rc;
 	}
 
 	rc = mcs7830_write_config(udev, priv);
 	if (rc < 0) {
-		error("failed to set configuration\n");
+		pr_err("failed to set configuration\n");
 		return rc;
 	}
 
 	rc = mcs7830_apply_fixup(udev);
 	if (rc < 0) {
-		error("fixup application failed\n");
+		pr_err("fixup application failed\n");
 		return rc;
 	}
 
@@ -541,11 +541,11 @@
 	debug("%s() RX want len %d, got len %d, rc %d\n",
 	      __func__, wantlen, gotlen, rc);
 	if (rc != 0) {
-		error("RX: failed to receive\n");
+		pr_err("RX: failed to receive\n");
 		return rc;
 	}
 	if (gotlen > wantlen) {
-		error("RX: got too many bytes (%d)\n", gotlen);
+		pr_err("RX: got too many bytes (%d)\n", gotlen);
 		return -EIO;
 	}
 
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 9df6d32..ad2f606 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1456,7 +1456,7 @@
 
 	ret = driver->bind(&udc->gadget);
 	if (ret) {
-		error("driver->bind() returned %d\n", ret);
+		pr_err("driver->bind() returned %d\n", ret);
 		udc->driver = NULL;
 	}
 
@@ -1468,7 +1468,7 @@
 	struct at91_udc *udc = controller;
 
 	if (!driver || !driver->unbind || !driver->disconnect) {
-		error("bad paramter\n");
+		pr_err("bad paramter\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index ad31703..c0a95a9 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1228,7 +1228,7 @@
 
 	ret = driver->bind(&udc->gadget);
 	if (ret) {
-		error("driver->bind() returned %d\n", ret);
+		pr_err("driver->bind() returned %d\n", ret);
 		udc->driver = NULL;
 	}
 
@@ -1240,7 +1240,7 @@
 	struct usba_udc *udc = &controller;
 
 	if (!driver || !driver->unbind || !driver->disconnect) {
-		error("bad paramter\n");
+		pr_err("bad paramter\n");
 		return -EINVAL;
 	}
 
@@ -1261,7 +1261,7 @@
 
 	eps = malloc(sizeof(struct usba_ep) * pdata->num_ep);
 	if (!eps) {
-		error("failed to alloc eps\n");
+		pr_err("failed to alloc eps\n");
 		return NULL;
 	}
 
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index cb44374..088811c 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -835,7 +835,7 @@
 			    ROUND(sizeof(struct usb_ctrlrequest),
 				  CONFIG_SYS_CACHELINE_SIZE));
 	if (!usb_ctrl) {
-		error("No memory available for UDC!\n");
+		pr_err("No memory available for UDC!\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2cf5c8d..2e0ff45 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1059,7 +1059,7 @@
 			&& dev->config
 			&& dev->tx_qlen != 0) {
 		/* tx fifo is full, but we can't clear it...*/
-		error("can't change configurations");
+		pr_err("can't change configurations");
 		return -ESPIPE;
 	}
 	eth_reset_config(dev);
@@ -1233,7 +1233,7 @@
 	/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
 	status = rndis_msg_parser(dev->rndis_config, (u8 *) req->buf);
 	if (status < 0)
-		error("%s: rndis parse error %d", __func__, status);
+		pr_err("%s: rndis parse error %d", __func__, status);
 }
 
 #endif	/* RNDIS */
@@ -1554,7 +1554,7 @@
 	retval = usb_ep_queue(dev->out_ep, req, gfp_flags);
 
 	if (retval)
-		error("rx submit --> %d", retval);
+		pr_err("rx submit --> %d", retval);
 
 	return retval;
 }
@@ -1624,7 +1624,7 @@
 fail2:
 	usb_ep_free_request(dev->in_ep, dev->tx_req);
 fail1:
-	error("can't alloc requests");
+	pr_err("can't alloc requests");
 	return -1;
 }
 
@@ -2060,7 +2060,7 @@
 		 * anything less functional on CDC-capable hardware,
 		 * so we fail in this case.
 		 */
-		error("controller '%s' not recognized",
+		pr_err("controller '%s' not recognized",
 			gadget->name);
 		return -ENODEV;
 	}
@@ -2121,7 +2121,7 @@
 	in_ep = usb_ep_autoconfig(gadget, &fs_source_desc);
 	if (!in_ep) {
 autoconf_fail:
-		error("can't autoconfigure on %s\n",
+		pr_err("can't autoconfigure on %s\n",
 			gadget->name);
 		return -ENODEV;
 	}
@@ -2142,7 +2142,7 @@
 		if (status_ep) {
 			status_ep->driver_data = status_ep;	/* claim */
 		} else if (rndis) {
-			error("can't run RNDIS on %s", gadget->name);
+			pr_err("can't run RNDIS on %s", gadget->name);
 			return -ENODEV;
 #ifdef CONFIG_USB_ETH_CDC
 		} else if (cdc) {
@@ -2244,7 +2244,7 @@
 	if (rndis) {
 		status = rndis_init();
 		if (status < 0) {
-			error("can't init RNDIS, %d", status);
+			pr_err("can't init RNDIS, %d", status);
 			goto fail;
 		}
 	}
@@ -2335,7 +2335,7 @@
 	return 0;
 
 fail:
-	error("%s failed, status = %d", __func__, status);
+	pr_err("%s failed, status = %d", __func__, status);
 	eth_unbind(gadget);
 	return status;
 }
@@ -2350,7 +2350,7 @@
 
 	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
 	if (!dev || ret) {
-		error("No USB device found\n");
+		pr_err("No USB device found\n");
 		return -ENODEV;
 	}
 
@@ -2369,7 +2369,7 @@
 
 #ifdef CONFIG_DM_USB
 	if (dm_usb_init(dev)) {
-		error("USB ether not found\n");
+		pr_err("USB ether not found\n");
 		return -ENODEV;
 	}
 #else
@@ -2393,11 +2393,11 @@
 			sizeof(host_addr));
 
 	if (!is_eth_addr_valid(dev_addr)) {
-		error("Need valid 'usbnet_devaddr' to be set");
+		pr_err("Need valid 'usbnet_devaddr' to be set");
 		goto fail;
 	}
 	if (!is_eth_addr_valid(host_addr)) {
-		error("Need valid 'usbnet_hostaddr' to be set");
+		pr_err("Need valid 'usbnet_hostaddr' to be set");
 		goto fail;
 	}
 
@@ -2427,7 +2427,7 @@
 	while (!dev->network_started) {
 		/* Handle control-c and timeouts */
 		if (ctrlc() || (get_timer(ts) > timeout)) {
-			error("The remote end did not respond in time.");
+			pr_err("The remote end did not respond in time.");
 			goto fail;
 		}
 		usb_gadget_handle_interrupts(0);
@@ -2456,7 +2456,7 @@
 		rndis_pkt = malloc(length +
 					sizeof(struct rndis_packet_msg_type));
 		if (!rndis_pkt) {
-			error("No memory to alloc RNDIS packet");
+			pr_err("No memory to alloc RNDIS packet");
 			goto drop;
 		}
 		rndis_add_hdr(rndis_pkt, length);
@@ -2574,7 +2574,7 @@
 
 	ret = _usb_eth_recv(priv);
 	if (ret) {
-		error("error packet receive\n");
+		pr_err("error packet receive\n");
 		return ret;
 	}
 
@@ -2585,7 +2585,7 @@
 		net_process_received_packet(net_rx_packets[0],
 					    dev->rx_req->length);
 	} else {
-		error("dev->rx_req invalid");
+		pr_err("dev->rx_req invalid");
 	}
 	packet_received = 0;
 	rx_submit(dev, dev->rx_req, 0);
@@ -2641,7 +2641,7 @@
 
 	ret = _usb_eth_recv(priv);
 	if (ret) {
-		error("error packet receive\n");
+		pr_err("error packet receive\n");
 		return ret;
 	}
 
@@ -2650,7 +2650,7 @@
 			*packetp = (uchar *)net_rx_packets[0];
 			return ethdev->rx_req->length;
 		} else {
-			error("dev->rx_req invalid");
+			pr_err("dev->rx_req invalid");
 			return -EFAULT;
 		}
 	}
@@ -2706,13 +2706,13 @@
 
 	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &usb_dev);
 	if (!usb_dev || ret) {
-		error("No USB device found\n");
+		pr_err("No USB device found\n");
 		return ret;
 	}
 
 	ret = device_bind_driver(usb_dev, "usb_ether", "usb_ether", &dev);
 	if (!dev || ret) {
-		error("usb - not able to bind usb_ether device\n");
+		pr_err("usb - not able to bind usb_ether device\n");
 		return ret;
 	}
 
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index f3382a9..7acffb6 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -410,7 +410,7 @@
 
 	strsep(&cmd, ":");
 	if (!cmd) {
-		error("missing variable");
+		pr_err("missing variable");
 		fastboot_tx_write_str("FAILmissing var");
 		return;
 	}
@@ -593,7 +593,7 @@
 
 	strsep(&cmd, ":");
 	if (!cmd) {
-		error("missing partition name");
+		pr_err("missing partition name");
 		fastboot_tx_write_str("FAILmissing partition name");
 		return;
 	}
@@ -645,7 +645,7 @@
 
 	strsep(&cmd, ":");
 	if (!cmd) {
-		error("missing partition name");
+		pr_err("missing partition name");
 		fastboot_tx_write_str("FAILmissing partition name");
 		return;
 	}
@@ -718,7 +718,7 @@
 	}
 
 	if (!func_cb) {
-		error("unknown command: %.*s", req->actual, cmdbuf);
+		pr_err("unknown command: %.*s", req->actual, cmdbuf);
 		fastboot_tx_write_str("FAILunknown command");
 	} else {
 		if (req->actual < req->length) {
@@ -726,7 +726,7 @@
 			buf[req->actual] = 0;
 			func_cb(ep, req);
 		} else {
-			error("buffer overflow");
+			pr_err("buffer overflow");
 			fastboot_tx_write_str("FAILbuffer overflow");
 		}
 	}
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 0fae66b..fd3da92 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -237,12 +237,12 @@
 	u8 report = data[0];
 
 	if (status != 0) {
-		error("Status: %d", status);
+		pr_err("Status: %d", status);
 		return;
 	}
 
 	if (report != 1) {
-		error("Unexpected report %d", report);
+		pr_err("Unexpected report %d", report);
 		return;
 	}
 
@@ -309,7 +309,7 @@
 		sdp->next_state = SDP_STATE_IDLE;
 		break;
 	default:
-		error("Unknown command: %04x\n", be16_to_cpu(cmd->cmd));
+		pr_err("Unknown command: %04x\n", be16_to_cpu(cmd->cmd));
 	}
 }
 
@@ -322,12 +322,12 @@
 	int datalen = req->length - 1;
 
 	if (status != 0) {
-		error("Status: %d", status);
+		pr_err("Status: %d", status);
 		return;
 	}
 
 	if (report != 2) {
-		error("Unexpected report %d", report);
+		pr_err("Unexpected report %d", report);
 		return;
 	}
 
@@ -360,7 +360,7 @@
 		sdp->state = SDP_STATE_TX_SEC_CONF;
 		break;
 	default:
-		error("Invalid state: %d", sdp->state);
+		pr_err("Invalid state: %d", sdp->state);
 	}
 }
 
@@ -370,7 +370,7 @@
 	int status = req->status;
 
 	if (status != 0) {
-		error("Status: %d", status);
+		pr_err("Status: %d", status);
 		return;
 	}
 
@@ -393,7 +393,7 @@
 			sdp->state = SDP_STATE_IDLE;
 		break;
 	default:
-		error("Wrong State: %d", sdp->state);
+		pr_err("Wrong State: %d", sdp->state);
 		sdp->state = SDP_STATE_IDLE;
 		break;
 	}
diff --git a/drivers/usb/gadget/f_thor.c b/drivers/usb/gadget/f_thor.c
index cd4d9e6..18f233a 100644
--- a/drivers/usb/gadget/f_thor.c
+++ b/drivers/usb/gadget/f_thor.c
@@ -174,7 +174,7 @@
 					transfer_buffer, THOR_STORE_UNIT_SIZE,
 					(*cnt)++);
 			if (ret) {
-				error("DFU write failed [%d] cnt: %d",
+				pr_err("DFU write failed [%d] cnt: %d",
 				      ret, *cnt);
 				return ret;
 			}
@@ -218,20 +218,20 @@
 
 	dfu_entity = dfu_get_entity(alt_setting_num);
 	if (!dfu_entity) {
-		error("Alt setting: %d entity not found!\n", alt_setting_num);
+		pr_err("Alt setting: %d entity not found!\n", alt_setting_num);
 		return -ENOENT;
 	}
 
 	transfer_buffer = dfu_get_buf(dfu_entity);
 	if (!transfer_buffer) {
-		error("Transfer buffer not allocated!");
+		pr_err("Transfer buffer not allocated!");
 		return -ENXIO;
 	}
 
 	if (left) {
 		ret = dfu_write(dfu_entity, transfer_buffer, left, cnt++);
 		if (ret) {
-			error("DFU write failed [%d]: left: %llu", ret, left);
+			pr_err("DFU write failed [%d]: left: %llu", ret, left);
 			return ret;
 		}
 	}
@@ -245,7 +245,7 @@
 	 */
 	ret = dfu_flush(dfu_entity, transfer_buffer, 0, cnt);
 	if (ret)
-		error("DFU flush failed!");
+		pr_err("DFU flush failed!");
 
 	return ret;
 }
@@ -285,7 +285,7 @@
 
 		alt_setting_num = dfu_get_alt(f_name);
 		if (alt_setting_num < 0) {
-			error("Alt setting [%d] to write not found!",
+			pr_err("Alt setting [%d] to write not found!",
 			      alt_setting_num);
 			rsp->ack = -ENODEV;
 			ret = rsp->ack;
@@ -311,7 +311,7 @@
 		debug("DL EXIT\n");
 		break;
 	default:
-		error("Operation not supported: %d", rqt->rqt_data);
+		pr_err("Operation not supported: %d", rqt->rqt_data);
 		ret = -ENOTSUPP;
 	}
 
@@ -342,7 +342,7 @@
 		puts("RQT: UPLOAD not supported!\n");
 		break;
 	default:
-		error("unknown request (%d)", rqt->rqt);
+		pr_err("unknown request (%d)", rqt->rqt);
 	}
 
 	return ret;
@@ -541,7 +541,7 @@
 
 		status = usb_ep_queue(dev->out_ep, dev->out_req, 0);
 		if (status) {
-			error("kill %s:  resubmit %d bytes --> %d",
+			pr_err("kill %s:  resubmit %d bytes --> %d",
 			      dev->out_ep->name, dev->out_req->length, status);
 			usb_ep_set_halt(dev->out_ep);
 			return -EAGAIN;
@@ -575,7 +575,7 @@
 
 	status = usb_ep_queue(dev->in_ep, dev->in_req, 0);
 	if (status) {
-		error("kill %s:  resubmit %d bytes --> %d",
+		pr_err("kill %s:  resubmit %d bytes --> %d",
 		      dev->in_ep->name, dev->in_req->length, status);
 		usb_ep_set_halt(dev->in_ep);
 	}
@@ -608,7 +608,7 @@
 	case -ESHUTDOWN:		/* disconnect from host */
 	case -EREMOTEIO:                /* short read */
 	case -EOVERFLOW:
-		error("ERROR:%d", status);
+		pr_err("ERROR:%d", status);
 		break;
 	}
 
@@ -664,7 +664,7 @@
 		break;
 
 	default:
-		error("thor_setup: unknown request: %d", ctrl->bRequest);
+		pr_err("thor_setup: unknown request: %d", ctrl->bRequest);
 	}
 
 	if (value >= 0) {
@@ -973,7 +973,7 @@
 		debug("Communication Data interface\n");
 		result = thor_eps_setup(f);
 		if (result)
-			error("%s: EPs setup failed!", __func__);
+			pr_err("%s: EPs setup failed!", __func__);
 		dev->configuration_done = 1;
 		break;
 	}
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 0ed72d5..1293e18 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -179,7 +179,7 @@
 
 	ret = regulator_set_enable(vbus_supply, true);
 	if (ret) {
-		error("Error enabling vbus supply\n");
+		pr_err("Error enabling vbus supply\n");
 		return ret;
 	}
 
diff --git a/drivers/usb/host/dwc3-sti-glue.c b/drivers/usb/host/dwc3-sti-glue.c
index 02ad311..6dc656a 100644
--- a/drivers/usb/host/dwc3-sti-glue.c
+++ b/drivers/usb/host/dwc3-sti-glue.c
@@ -71,7 +71,7 @@
 		break;
 
 	default:
-		error("Unsupported mode of operation %d\n", plat->mode);
+		pr_err("Unsupported mode of operation %d\n", plat->mode);
 		return -EINVAL;
 	}
 	writel(val, plat->syscfg_base + plat->syscfg_offset);
@@ -113,7 +113,7 @@
 	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
 				   "reg", reg, ARRAY_SIZE(reg));
 	if (ret) {
-		error("unable to find st,stih407-dwc3 reg property(%d)\n", ret);
+		pr_err("unable to find st,stih407-dwc3 reg property(%d)\n", ret);
 		return ret;
 	}
 
@@ -124,14 +124,14 @@
 	ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "st,syscfg",
 					   &syscon);
 	if (ret) {
-		error("unable to find syscon device (%d)\n", ret);
+		pr_err("unable to find syscon device (%d)\n", ret);
 		return ret;
 	}
 
 	/* get syscfg-reg base address */
 	regmap = syscon_get_regmap(syscon);
 	if (!regmap) {
-		error("unable to find regmap\n");
+		pr_err("unable to find regmap\n");
 		return -ENODEV;
 	}
 	plat->syscfg_base = regmap->base;
@@ -139,14 +139,14 @@
 	/* get powerdown reset */
 	ret = reset_get_by_name(dev, "powerdown", &plat->powerdown_ctl);
 	if (ret) {
-		error("can't get powerdown reset for %s (%d)", dev->name, ret);
+		pr_err("can't get powerdown reset for %s (%d)", dev->name, ret);
 		return ret;
 	}
 
 	/* get softreset reset */
 	ret = reset_get_by_name(dev, "softreset", &plat->softreset_ctl);
 	if (ret)
-		error("can't get soft reset for %s (%d)", dev->name, ret);
+		pr_err("can't get soft reset for %s (%d)", dev->name, ret);
 
 	return ret;
 };
@@ -159,14 +159,14 @@
 	/* check if one subnode is present */
 	dwc3_node = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
 	if (dwc3_node <= 0) {
-		error("Can't find subnode for %s\n", dev->name);
+		pr_err("Can't find subnode for %s\n", dev->name);
 		return -ENODEV;
 	}
 
 	/* check if the subnode compatible string is the dwc3 one*/
 	if (fdt_node_check_compatible(gd->fdt_blob, dwc3_node,
 				      "snps,dwc3") != 0) {
-		error("Can't find dwc3 subnode for %s\n", dev->name);
+		pr_err("Can't find dwc3 subnode for %s\n", dev->name);
 		return -ENODEV;
 	}
 
@@ -187,13 +187,13 @@
 	/* deassert both powerdown and softreset */
 	ret = reset_deassert(&plat->powerdown_ctl);
 	if (ret < 0) {
-		error("DWC3 powerdown reset deassert failed: %d", ret);
+		pr_err("DWC3 powerdown reset deassert failed: %d", ret);
 		return ret;
 	}
 
 	ret = reset_deassert(&plat->softreset_ctl);
 	if (ret < 0) {
-		error("DWC3 soft reset deassert failed: %d", ret);
+		pr_err("DWC3 soft reset deassert failed: %d", ret);
 		goto softreset_err;
 	}
 
@@ -208,14 +208,14 @@
 init_err:
 	ret = reset_assert(&plat->softreset_ctl);
 	if (ret < 0) {
-		error("DWC3 soft reset deassert failed: %d", ret);
+		pr_err("DWC3 soft reset deassert failed: %d", ret);
 		return ret;
 	}
 
 softreset_err:
 	ret = reset_assert(&plat->powerdown_ctl);
 	if (ret < 0)
-		error("DWC3 powerdown reset deassert failed: %d", ret);
+		pr_err("DWC3 powerdown reset deassert failed: %d", ret);
 
 	return ret;
 }
@@ -228,13 +228,13 @@
 	/* assert both powerdown and softreset */
 	ret = reset_assert(&plat->powerdown_ctl);
 	if (ret < 0) {
-		error("DWC3 powerdown reset deassert failed: %d", ret);
+		pr_err("DWC3 powerdown reset deassert failed: %d", ret);
 		return ret;
 	}
 
 	ret = reset_assert(&plat->softreset_ctl);
 	if (ret < 0)
-		error("DWC3 soft reset deassert failed: %d", ret);
+		pr_err("DWC3 soft reset deassert failed: %d", ret);
 
 	return ret;
 }
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
index 18e1e0e..1cb92c0 100644
--- a/drivers/usb/host/ehci-generic.c
+++ b/drivers/usb/host/ehci-generic.c
@@ -51,7 +51,7 @@
 				break;
 			err = clk_enable(&priv->clocks[i]);
 			if (err) {
-				error("failed to enable clock %d\n", i);
+				pr_err("failed to enable clock %d\n", i);
 				clk_free(&priv->clocks[i]);
 				goto clk_err;
 			}
@@ -59,7 +59,7 @@
 		}
 	} else {
 		if (clock_nb != -ENOENT) {
-			error("failed to get clock phandle(%d)\n", clock_nb);
+			pr_err("failed to get clock phandle(%d)\n", clock_nb);
 			return clock_nb;
 		}
 	}
@@ -80,7 +80,7 @@
 				break;
 
 			if (reset_deassert(&priv->resets[i])) {
-				error("failed to deassert reset %d\n", i);
+				pr_err("failed to deassert reset %d\n", i);
 				reset_free(&priv->resets[i]);
 				goto reset_err;
 			}
@@ -88,7 +88,7 @@
 		}
 	} else {
 		if (reset_nb != -ENOENT) {
-			error("failed to get reset phandle(%d)\n", reset_nb);
+			pr_err("failed to get reset phandle(%d)\n", reset_nb);
 			goto clk_err;
 		}
 	}
@@ -96,14 +96,14 @@
 	err = generic_phy_get_by_index(dev, 0, &priv->phy);
 	if (err) {
 		if (err != -ENOENT) {
-			error("failed to get usb phy\n");
+			pr_err("failed to get usb phy\n");
 			goto reset_err;
 		}
 	} else {
 
 		err = generic_phy_init(&priv->phy);
 		if (err) {
-			error("failed to init usb phy\n");
+			pr_err("failed to init usb phy\n");
 			goto reset_err;
 		}
 	}
@@ -122,17 +122,17 @@
 	if (generic_phy_valid(&priv->phy)) {
 		ret = generic_phy_exit(&priv->phy);
 		if (ret)
-			error("failed to release phy\n");
+			pr_err("failed to release phy\n");
 	}
 
 reset_err:
 	ret = reset_release_all(priv->resets, priv->reset_count);
 	if (ret)
-		error("failed to assert all resets\n");
+		pr_err("failed to assert all resets\n");
 clk_err:
 	ret = clk_release_all(priv->clocks, priv->clock_count);
 	if (ret)
-		error("failed to disable all clocks\n");
+		pr_err("failed to disable all clocks\n");
 
 	return err;
 }
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index e22ee97..bf55a71 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -47,14 +47,14 @@
 
 			err = clk_enable(&priv->clocks[i]);
 			if (err) {
-				error("failed to enable clock %d\n", i);
+				pr_err("failed to enable clock %d\n", i);
 				clk_free(&priv->clocks[i]);
 				goto clk_err;
 			}
 			priv->clock_count++;
 		}
 	} else if (clock_nb != -ENOENT) {
-		error("failed to get clock phandle(%d)\n", clock_nb);
+		pr_err("failed to get clock phandle(%d)\n", clock_nb);
 		return clock_nb;
 	}
 
@@ -74,28 +74,28 @@
 
 			err = reset_deassert(&priv->resets[i]);
 			if (err) {
-				error("failed to deassert reset %d\n", i);
+				pr_err("failed to deassert reset %d\n", i);
 				reset_free(&priv->resets[i]);
 				goto reset_err;
 			}
 			priv->reset_count++;
 		}
 	} else if (reset_nb != -ENOENT) {
-		error("failed to get reset phandle(%d)\n", reset_nb);
+		pr_err("failed to get reset phandle(%d)\n", reset_nb);
 		goto clk_err;
 	}
 
 	err = generic_phy_get_by_index(dev, 0, &priv->phy);
 	if (err) {
 		if (err != -ENOENT) {
-			error("failed to get usb phy\n");
+			pr_err("failed to get usb phy\n");
 			goto reset_err;
 		}
 	} else {
 
 		err = generic_phy_init(&priv->phy);
 		if (err) {
-			error("failed to init usb phy\n");
+			pr_err("failed to init usb phy\n");
 			goto reset_err;
 		}
 	}
@@ -110,17 +110,17 @@
 	if (generic_phy_valid(&priv->phy)) {
 		ret = generic_phy_exit(&priv->phy);
 		if (ret)
-			error("failed to release phy\n");
+			pr_err("failed to release phy\n");
 	}
 
 reset_err:
 	ret = reset_release_all(priv->resets, priv->reset_count);
 	if (ret)
-		error("failed to assert all resets\n");
+		pr_err("failed to assert all resets\n");
 clk_err:
 	ret = clk_release_all(priv->clocks, priv->clock_count);
 	if (ret)
-		error("failed to disable all clocks\n");
+		pr_err("failed to disable all clocks\n");
 
 	return err;
 }
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 4191a89..258d1cd 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -128,13 +128,13 @@
 	ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy);
 	if (ret) {
 		if (ret != -ENOENT) {
-			error("Failed to get USB PHY for %s\n", dev->name);
+			pr_err("Failed to get USB PHY for %s\n", dev->name);
 			return ret;
 		}
 	} else {
 		ret = generic_phy_init(&plat->usb_phy);
 		if (ret) {
-			error("Can't init USB PHY for %s\n", dev->name);
+			pr_err("Can't init USB PHY for %s\n", dev->name);
 			return ret;
 		}
 	}
@@ -161,7 +161,7 @@
 	if (generic_phy_valid(&plat->usb_phy)) {
 		ret = generic_phy_exit(&plat->usb_phy);
 		if (ret) {
-			error("Can't deinit USB PHY for %s\n", dev->name);
+			pr_err("Can't deinit USB PHY for %s\n", dev->name);
 			return ret;
 		}
 	}
diff --git a/drivers/usb/host/xhci-rockchip.c b/drivers/usb/host/xhci-rockchip.c
index ca3abff..b1f9884 100644
--- a/drivers/usb/host/xhci-rockchip.c
+++ b/drivers/usb/host/xhci-rockchip.c
@@ -46,7 +46,7 @@
 	 */
 	plat->hcd_base = dev_read_addr(dev);
 	if (plat->hcd_base == FDT_ADDR_T_NONE) {
-		error("Can't get the XHCI register base address\n");
+		pr_err("Can't get the XHCI register base address\n");
 		return -ENXIO;
 	}
 
@@ -60,7 +60,7 @@
 	}
 
 	if (plat->phy_base == FDT_ADDR_T_NONE) {
-		error("Can't get the usbphy register address\n");
+		pr_err("Can't get the usbphy register address\n");
 		return -ENXIO;
 	}
 
@@ -117,7 +117,7 @@
 
 	ret = dwc3_core_init(rkxhci->dwc3_reg);
 	if (ret) {
-		error("failed to initialize core\n");
+		pr_err("failed to initialize core\n");
 		return ret;
 	}
 
@@ -149,14 +149,14 @@
 	if (plat->vbus_supply) {
 		ret = regulator_set_enable(plat->vbus_supply, true);
 		if (ret) {
-			error("XHCI: failed to set VBus supply\n");
+			pr_err("XHCI: failed to set VBus supply\n");
 			return ret;
 		}
 	}
 
 	ret = rockchip_xhci_core_init(ctx, dev);
 	if (ret) {
-		error("XHCI: failed to initialize controller\n");
+		pr_err("XHCI: failed to initialize controller\n");
 		return ret;
 	}
 
@@ -179,7 +179,7 @@
 	if (plat->vbus_supply) {
 		ret = regulator_set_enable(plat->vbus_supply, false);
 		if (ret)
-			error("XHCI: failed to set VBus supply\n");
+			pr_err("XHCI: failed to set VBus supply\n");
 	}
 
 	return ret;
diff --git a/drivers/usb/musb-new/ti-musb.c b/drivers/usb/musb-new/ti-musb.c
index de10131..233857a 100644
--- a/drivers/usb/musb-new/ti-musb.c
+++ b/drivers/usb/musb-new/ti-musb.c
@@ -106,7 +106,7 @@
 							  "mentor,multipoint",
 							  -1);
 	if (platdata->musb_config.multipoint < 0) {
-		error("MUSB multipoint DT entry missing\n");
+		pr_err("MUSB multipoint DT entry missing\n");
 		return -ENOENT;
 	}
 
@@ -115,14 +115,14 @@
 	platdata->musb_config.num_eps = fdtdec_get_int(fdt, node,
 						       "mentor,num-eps", -1);
 	if (platdata->musb_config.num_eps < 0) {
-		error("MUSB num-eps DT entry missing\n");
+		pr_err("MUSB num-eps DT entry missing\n");
 		return -ENOENT;
 	}
 
 	platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node,
 							"mentor,ram-bits", -1);
 	if (platdata->musb_config.ram_bits < 0) {
-		error("MUSB ram-bits DT entry missing\n");
+		pr_err("MUSB ram-bits DT entry missing\n");
 		return -ENOENT;
 	}
 
@@ -132,7 +132,7 @@
 
 	platdata->plat.power = fdtdec_get_int(fdt, node, "mentor,power", -1);
 	if (platdata->plat.power < 0) {
-		error("MUSB mentor,power DT entry missing\n");
+		pr_err("MUSB mentor,power DT entry missing\n");
 		return -ENOENT;
 	}
 
@@ -183,7 +183,7 @@
 
 	ret = ti_musb_ofdata_to_platdata(dev);
 	if (ret) {
-		error("platdata dt parse error\n");
+		pr_err("platdata dt parse error\n");
 		return ret;
 	}
 
@@ -229,7 +229,7 @@
 			ret = device_bind_driver_to_node(parent, "ti-musb-host",
 					name, offset_to_ofnode(node), &dev);
 			if (ret) {
-				error("musb - not able to bind usb host node\n");
+				pr_err("musb - not able to bind usb host node\n");
 				return ret;
 			}
 			break;
diff --git a/drivers/video/am335x-fb.c b/drivers/video/am335x-fb.c
index bb5cc97..a8b3e74 100644
--- a/drivers/video/am335x-fb.c
+++ b/drivers/video/am335x-fb.c
@@ -128,7 +128,7 @@
 		raster_ctrl |= LCD_TFT_24BPP_MODE;
 		break;
 	default:
-		error("am335x-fb: invalid bpp value: %d\n", panel->bpp);
+		pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
 		return -1;
 	}