usb: xhci: omap: Remove common dwc3 drv functions calls
Remove all redundant dwc3 driver function calls that
are defined by dwc3 driver
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c
index 912b2bd..3a55208 100644
--- a/drivers/usb/host/xhci-omap.c
+++ b/drivers/usb/host/xhci-omap.c
@@ -34,66 +34,6 @@
int board_usb_init(int index, enum usb_init_type init)
__attribute__((weak, alias("__board_usb_init")));
-static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
-{
- clrsetbits_le32(&dwc3_reg->g_ctl,
- DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
- DWC3_GCTL_PRTCAPDIR(mode));
-}
-
-static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
-{
- /* Before Resetting PHY, put Core in Reset */
- setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
-
- omap_reset_usb_phy(dwc3_reg);
-
- /* After PHYs are stable we can take Core out of reset state */
- clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
-}
-
-static int dwc3_core_init(struct dwc3 *dwc3_reg)
-{
- u32 reg;
- u32 revision;
- unsigned int dwc3_hwparams1;
-
- revision = readl(&dwc3_reg->g_snpsid);
- /* This should read as U3 followed by revision number */
- if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
- puts("this is not a DesignWare USB3 DRD Core\n");
- return -1;
- }
-
- dwc3_core_soft_reset(dwc3_reg);
-
- dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
-
- reg = readl(&dwc3_reg->g_ctl);
- reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
- reg &= ~DWC3_GCTL_DISSCRAMBLE;
- switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
- case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
- reg &= ~DWC3_GCTL_DSBLCLKGTNG;
- break;
- default:
- debug("No power optimization available\n");
- }
-
- /*
- * WORKAROUND: DWC3 revisions <1.90a have a bug
- * where the device can fail to connect at SuperSpeed
- * and falls back to high-speed mode which causes
- * the device to enter a Connect/Disconnect loop
- */
- if ((revision & DWC3_REVISION_MASK) < 0x190a)
- reg |= DWC3_GCTL_U2RSTECN;
-
- writel(reg, &dwc3_reg->g_ctl);
-
- return 0;
-}
-
static int omap_xhci_core_init(struct omap_xhci *omap)
{
int ret = 0;
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
index 63d9301..f9069c7 100644
--- a/drivers/usb/phy/omap_usb_phy.c
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -223,24 +223,6 @@
}
#endif /* CONFIG_AM437X_USB2PHY2_HOST */
-void omap_reset_usb_phy(struct dwc3 *dwc3_reg)
-{
- /* Assert USB3 PHY reset */
- setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
- /* Assert USB2 PHY reset */
- setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
-
- mdelay(100);
-
- /* Clear USB3 PHY reset */
- clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
- /* Clear USB2 PHY reset */
- clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
-
-}
-
void omap_enable_phy(struct omap_xhci *omap)
{
#ifdef CONFIG_OMAP_USB2PHY2_HOST
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 33e534a..ccdfb9c 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -110,6 +110,7 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
index 17fdded..d38b7b5 100644
--- a/include/configs/beagle_x15.h
+++ b/include/configs/beagle_x15.h
@@ -68,6 +68,7 @@
/* USB xHCI HOST */
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
+#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index d84427d..0323c72 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -175,6 +175,7 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2