cyclic: Use schedule() instead of WATCHDOG_RESET()
Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c
index 06bf5ac..61bfd17 100644
--- a/drivers/mtd/nand/raw/atmel_nand.c
+++ b/drivers/mtd/nand/raw/atmel_nand.c
@@ -420,7 +420,7 @@
while (--timeout) {
if (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_CALC_DONE)
break;
- WATCHDOG_RESET();
+ schedule();
udelay(1);
}
@@ -558,7 +558,7 @@
while (--timeout) {
if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
break;
- WATCHDOG_RESET();
+ schedule();
udelay(1);
}
@@ -598,7 +598,7 @@
while (--timeout) {
if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY))
break;
- WATCHDOG_RESET();
+ schedule();
udelay(1);
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 1a1a757..215b9ba 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -595,7 +595,7 @@
if (status & NAND_STATUS_READY)
break;
- WATCHDOG_RESET();
+ schedule();
}
};
@@ -2342,7 +2342,7 @@
while (1) {
unsigned int ecc_failures = mtd->ecc_stats.failed;
- WATCHDOG_RESET();
+ schedule();
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
@@ -2695,7 +2695,7 @@
page = realpage & chip->pagemask;
while (1) {
- WATCHDOG_RESET();
+ schedule();
if (ops->mode == MTD_OPS_RAW)
ret = chip->ecc.read_oob_raw(mtd, chip, page);
@@ -3263,7 +3263,7 @@
else
use_bufpoi = 0;
- WATCHDOG_RESET();
+ schedule();
/* Partial page write?, or need to use bounce buffer */
if (use_bufpoi) {
pr_debug("%s: using write bounce buffer for buf@%p\n",
@@ -3556,7 +3556,7 @@
instr->state = MTD_ERASING;
while (len) {
- WATCHDOG_RESET();
+ schedule();
/* Check if we have a bad block, we do not erase bad blocks! */
if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) <<
diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c
index 5150607..b2345dc 100644
--- a/drivers/mtd/nand/raw/nand_util.c
+++ b/drivers/mtd/nand/raw/nand_util.c
@@ -103,7 +103,7 @@
erased_length < erase_length;
erase.addr += mtd->erasesize) {
- WATCHDOG_RESET();
+ schedule();
if (opts->lim && (erase.addr >= (opts->offset + opts->lim))) {
puts("Size of erase exceeds limit\n");
@@ -638,7 +638,7 @@
size_t block_offset = offset & (mtd->erasesize - 1);
size_t write_size, truncated_write_size;
- WATCHDOG_RESET();
+ schedule();
if (nand_block_isbad(mtd, block_start)) {
printf("Skip bad block 0x%08llx\n", block_start);
@@ -753,7 +753,7 @@
size_t block_offset = offset & (mtd->erasesize - 1);
size_t read_length;
- WATCHDOG_RESET();
+ schedule();
if (nand_block_isbad(mtd, offset & ~(mtd->erasesize - 1))) {
printf("Skipping bad block 0x%08llx\n",