xen: Add essential and required interface headers
Add essential and required Xen interface headers only taken from
the stable Linux kernel stable/linux-5.7.y at commit
66dfe4522160 Linux 5.7.5.
These are better suited for U-boot than the original headers
from Xen as they are the stripped versions of the same.
At the same time use public protocols from Xen RELEASE-4.13.1, at
commit 6278553325a9 update Xen version to 4.13.1
as those have more comments in them.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
diff --git a/include/xen/interface/event_channel.h b/include/xen/interface/event_channel.h
new file mode 100644
index 0000000..b0e3598
--- /dev/null
+++ b/include/xen/interface/event_channel.h
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * event_channel.h
+ *
+ * Event channels between domains.
+ *
+ * Copyright (c) 2003-2004, K A Fraser.
+ */
+
+#ifndef __XEN_PUBLIC_EVENT_CHANNEL_H__
+#define __XEN_PUBLIC_EVENT_CHANNEL_H__
+
+#include <xen/interface/xen.h>
+
+typedef u32 evtchn_port_t;
+DEFINE_GUEST_HANDLE(evtchn_port_t);
+
+/*
+ * EVTCHNOP_alloc_unbound: Allocate a port in domain <dom> and mark as
+ * accepting interdomain bindings from domain <remote_dom>. A fresh port
+ * is allocated in <dom> and returned as <port>.
+ * NOTES:
+ * 1. If the caller is unprivileged then <dom> must be DOMID_SELF.
+ * 2. <rdom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_alloc_unbound 6
+struct evtchn_alloc_unbound {
+ /* IN parameters */
+ domid_t dom, remote_dom;
+ /* OUT parameters */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_interdomain: Construct an interdomain event channel between
+ * the calling domain and <remote_dom>. <remote_dom,remote_port> must identify
+ * a port that is unbound and marked as accepting bindings from the calling
+ * domain. A fresh port is allocated in the calling domain and returned as
+ * <local_port>.
+ * NOTES:
+ * 2. <remote_dom> may be DOMID_SELF, allowing loopback connections.
+ */
+#define EVTCHNOP_bind_interdomain 0
+struct evtchn_bind_interdomain {
+ /* IN parameters. */
+ domid_t remote_dom;
+ evtchn_port_t remote_port;
+ /* OUT parameters. */
+ evtchn_port_t local_port;
+};
+
+/*
+ * EVTCHNOP_bind_virq: Bind a local event channel to VIRQ <irq> on specified
+ * vcpu.
+ * NOTES:
+ * 1. A virtual IRQ may be bound to at most one event channel per vcpu.
+ * 2. The allocated event channel is bound to the specified vcpu. The binding
+ * may not be changed.
+ */
+#define EVTCHNOP_bind_virq 1
+struct evtchn_bind_virq {
+ /* IN parameters. */
+ u32 virq;
+ u32 vcpu;
+ /* OUT parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_pirq: Bind a local event channel to PIRQ <irq>.
+ * NOTES:
+ * 1. A physical IRQ may be bound to at most one event channel per domain.
+ * 2. Only a sufficiently-privileged domain may bind to a physical IRQ.
+ */
+#define EVTCHNOP_bind_pirq 2
+struct evtchn_bind_pirq {
+ /* IN parameters. */
+ u32 pirq;
+#define BIND_PIRQ__WILL_SHARE 1
+ u32 flags; /* BIND_PIRQ__* */
+ /* OUT parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_bind_ipi: Bind a local event channel to receive events.
+ * NOTES:
+ * 1. The allocated event channel is bound to the specified vcpu. The binding
+ * may not be changed.
+ */
+#define EVTCHNOP_bind_ipi 7
+struct evtchn_bind_ipi {
+ u32 vcpu;
+ /* OUT parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_close: Close a local event channel <port>. If the channel is
+ * interdomain then the remote end is placed in the unbound state
+ * (EVTCHNSTAT_unbound), awaiting a new connection.
+ */
+#define EVTCHNOP_close 3
+struct evtchn_close {
+ /* IN parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_send: Send an event to the remote end of the channel whose local
+ * endpoint is <port>.
+ */
+#define EVTCHNOP_send 4
+struct evtchn_send {
+ /* IN parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_status: Get the current status of the communication channel which
+ * has an endpoint at <dom, port>.
+ * NOTES:
+ * 1. <dom> may be specified as DOMID_SELF.
+ * 2. Only a sufficiently-privileged domain may obtain the status of an event
+ * channel for which <dom> is not DOMID_SELF.
+ */
+#define EVTCHNOP_status 5
+struct evtchn_status {
+ /* IN parameters */
+ domid_t dom;
+ evtchn_port_t port;
+ /* OUT parameters */
+#define EVTCHNSTAT_closed 0 /* Channel is not in use. */
+#define EVTCHNSTAT_unbound 1 /* Channel is waiting interdom connection.*/
+#define EVTCHNSTAT_interdomain 2 /* Channel is connected to remote domain. */
+#define EVTCHNSTAT_pirq 3 /* Channel is bound to a phys IRQ line. */
+#define EVTCHNSTAT_virq 4 /* Channel is bound to a virtual IRQ line */
+#define EVTCHNSTAT_ipi 5 /* Channel is bound to a virtual IPI line */
+ u32 status;
+ u32 vcpu; /* VCPU to which this channel is bound. */
+ union {
+ struct {
+ domid_t dom;
+ } unbound; /* EVTCHNSTAT_unbound */
+ struct {
+ domid_t dom;
+ evtchn_port_t port;
+ } interdomain; /* EVTCHNSTAT_interdomain */
+ u32 pirq; /* EVTCHNSTAT_pirq */
+ u32 virq; /* EVTCHNSTAT_virq */
+ } u;
+};
+
+/*
+ * EVTCHNOP_bind_vcpu: Specify which vcpu a channel should notify when an
+ * event is pending.
+ * NOTES:
+ * 1. IPI- and VIRQ-bound channels always notify the vcpu that initialised
+ * the binding. This binding cannot be changed.
+ * 2. All other channels notify vcpu0 by default. This default is set when
+ * the channel is allocated (a port that is freed and subsequently reused
+ * has its binding reset to vcpu0).
+ */
+#define EVTCHNOP_bind_vcpu 8
+struct evtchn_bind_vcpu {
+ /* IN parameters. */
+ evtchn_port_t port;
+ u32 vcpu;
+};
+
+/*
+ * EVTCHNOP_unmask: Unmask the specified local event-channel port and deliver
+ * a notification to the appropriate VCPU if an event is pending.
+ */
+#define EVTCHNOP_unmask 9
+struct evtchn_unmask {
+ /* IN parameters. */
+ evtchn_port_t port;
+};
+
+/*
+ * EVTCHNOP_reset: Close all event channels associated with specified domain.
+ * NOTES:
+ * 1. <dom> may be specified as DOMID_SELF.
+ * 2. Only a sufficiently-privileged domain may specify other than DOMID_SELF.
+ */
+#define EVTCHNOP_reset 10
+struct evtchn_reset {
+ /* IN parameters. */
+ domid_t dom;
+};
+
+/*
+ * EVTCHNOP_init_control: initialize the control block for the FIFO ABI.
+ */
+#define EVTCHNOP_init_control 11
+struct evtchn_init_control {
+ /* IN parameters. */
+ u64 control_gfn;
+ u32 offset;
+ u32 vcpu;
+ /* OUT parameters. */
+ u8 link_bits;
+ u8 _pad[7];
+};
+
+/*
+ * EVTCHNOP_expand_array: add an additional page to the event array.
+ */
+#define EVTCHNOP_expand_array 12
+struct evtchn_expand_array {
+ /* IN parameters. */
+ u64 array_gfn;
+};
+
+/*
+ * EVTCHNOP_set_priority: set the priority for an event channel.
+ */
+#define EVTCHNOP_set_priority 13
+struct evtchn_set_priority {
+ /* IN parameters. */
+ evtchn_port_t port;
+ u32 priority;
+};
+
+struct evtchn_op {
+ u32 cmd; /* EVTCHNOP_* */
+ union {
+ struct evtchn_alloc_unbound alloc_unbound;
+ struct evtchn_bind_interdomain bind_interdomain;
+ struct evtchn_bind_virq bind_virq;
+ struct evtchn_bind_pirq bind_pirq;
+ struct evtchn_bind_ipi bind_ipi;
+ struct evtchn_close close;
+ struct evtchn_send send;
+ struct evtchn_status status;
+ struct evtchn_bind_vcpu bind_vcpu;
+ struct evtchn_unmask unmask;
+ } u;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(evtchn_op);
+
+/*
+ * 2-level ABI
+ */
+
+#define EVTCHN_2L_NR_CHANNELS (sizeof(xen_ulong_t) * sizeof(xen_ulong_t) * 64)
+
+/*
+ * FIFO ABI
+ */
+
+/* Events may have priorities from 0 (highest) to 15 (lowest). */
+#define EVTCHN_FIFO_PRIORITY_MAX 0
+#define EVTCHN_FIFO_PRIORITY_DEFAULT 7
+#define EVTCHN_FIFO_PRIORITY_MIN 15
+
+#define EVTCHN_FIFO_MAX_QUEUES (EVTCHN_FIFO_PRIORITY_MIN + 1)
+
+typedef u32 event_word_t;
+
+#define EVTCHN_FIFO_PENDING 31
+#define EVTCHN_FIFO_MASKED 30
+#define EVTCHN_FIFO_LINKED 29
+#define EVTCHN_FIFO_BUSY 28
+
+#define EVTCHN_FIFO_LINK_BITS 17
+#define EVTCHN_FIFO_LINK_MASK ((1 << EVTCHN_FIFO_LINK_BITS) - 1)
+
+#define EVTCHN_FIFO_NR_CHANNELS (1 << EVTCHN_FIFO_LINK_BITS)
+
+struct evtchn_fifo_control_block {
+ u32 ready;
+ u32 _rsvd;
+ event_word_t head[EVTCHN_FIFO_MAX_QUEUES];
+};
+
+#endif /* __XEN_PUBLIC_EVENT_CHANNEL_H__ */
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
new file mode 100644
index 0000000..4acd4bd
--- /dev/null
+++ b/include/xen/interface/grant_table.h
@@ -0,0 +1,565 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * grant_table.h
+ *
+ * Interface for granting foreign access to page frames, and receiving
+ * page-ownership transfers.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_GRANT_TABLE_H__
+#define __XEN_PUBLIC_GRANT_TABLE_H__
+
+#include <xen/interface/xen.h>
+
+/***********************************
+ * GRANT TABLE REPRESENTATION
+ */
+
+/* Some rough guidelines on accessing and updating grant-table entries
+ * in a concurrency-safe manner. For more information, Linux contains a
+ * reference implementation for guest OSes (arch/xen/kernel/grant_table.c).
+ *
+ * NB. WMB is a no-op on current-generation x86 processors. However, a
+ * compiler barrier will still be required.
+ *
+ * Introducing a valid entry into the grant table:
+ * 1. Write ent->domid.
+ * 2. Write ent->frame:
+ * GTF_permit_access: Frame to which access is permitted.
+ * GTF_accept_transfer: Pseudo-phys frame slot being filled by new
+ * frame, or zero if none.
+ * 3. Write memory barrier (WMB).
+ * 4. Write ent->flags, inc. valid type.
+ *
+ * Invalidating an unused GTF_permit_access entry:
+ * 1. flags = ent->flags.
+ * 2. Observe that !(flags & (GTF_reading|GTF_writing)).
+ * 3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ * NB. No need for WMB as reuse of entry is control-dependent on success of
+ * step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ *
+ * Invalidating an in-use GTF_permit_access entry:
+ * This cannot be done directly. Request assistance from the domain controller
+ * which can set a timeout on the use of a grant entry and take necessary
+ * action. (NB. This is not yet implemented!).
+ *
+ * Invalidating an unused GTF_accept_transfer entry:
+ * 1. flags = ent->flags.
+ * 2. Observe that !(flags & GTF_transfer_committed). [*]
+ * 3. Check result of SMP-safe CMPXCHG(&ent->flags, flags, 0).
+ * NB. No need for WMB as reuse of entry is control-dependent on success of
+ * step 3, and all architectures guarantee ordering of ctrl-dep writes.
+ * [*] If GTF_transfer_committed is set then the grant entry is 'committed'.
+ * The guest must /not/ modify the grant entry until the address of the
+ * transferred frame is written. It is safe for the guest to spin waiting
+ * for this to occur (detect by observing GTF_transfer_completed in
+ * ent->flags).
+ *
+ * Invalidating a committed GTF_accept_transfer entry:
+ * 1. Wait for (ent->flags & GTF_transfer_completed).
+ *
+ * Changing a GTF_permit_access from writable to read-only:
+ * Use SMP-safe CMPXCHG to set GTF_readonly, while checking !GTF_writing.
+ *
+ * Changing a GTF_permit_access from read-only to writable:
+ * Use SMP-safe bit-setting instruction.
+ */
+
+/*
+ * Reference to a grant entry in a specified domain's grant table.
+ */
+typedef u32 grant_ref_t;
+
+/*
+ * A grant table comprises a packed array of grant entries in one or more
+ * page frames shared between Xen and a guest.
+ * [XEN]: This field is written by Xen and read by the sharing guest.
+ * [GST]: This field is written by the guest and read by Xen.
+ */
+
+/*
+ * Version 1 of the grant table entry structure is maintained purely
+ * for backwards compatibility. New guests should use version 2.
+ */
+struct grant_entry_v1 {
+ /* GTF_xxx: various type and flag information. [XEN,GST] */
+ u16 flags;
+ /* The domain being granted foreign privileges. [GST] */
+ domid_t domid;
+ /*
+ * GTF_permit_access: Frame that @domid is allowed to map and access. [GST]
+ * GTF_accept_transfer: Frame whose ownership transferred by @domid. [XEN]
+ */
+ u32 frame;
+};
+
+/*
+ * Type of grant entry.
+ * GTF_invalid: This grant entry grants no privileges.
+ * GTF_permit_access: Allow @domid to map/access @frame.
+ * GTF_accept_transfer: Allow @domid to transfer ownership of one page frame
+ * to this guest. Xen writes the page number to @frame.
+ * GTF_transitive: Allow @domid to transitively access a subrange of
+ * @trans_grant in @trans_domid. No mappings are allowed.
+ */
+#define GTF_invalid (0U << 0)
+#define GTF_permit_access (1U << 0)
+#define GTF_accept_transfer (2U << 0)
+#define GTF_transitive (3U << 0)
+#define GTF_type_mask (3U << 0)
+
+/*
+ * Subflags for GTF_permit_access.
+ * GTF_readonly: Restrict @domid to read-only mappings and accesses. [GST]
+ * GTF_reading: Grant entry is currently mapped for reading by @domid. [XEN]
+ * GTF_writing: Grant entry is currently mapped for writing by @domid. [XEN]
+ * GTF_sub_page: Grant access to only a subrange of the page. @domid
+ * will only be allowed to copy from the grant, and not
+ * map it. [GST]
+ */
+#define _GTF_readonly (2)
+#define GTF_readonly (1U << _GTF_readonly)
+#define _GTF_reading (3)
+#define GTF_reading (1U << _GTF_reading)
+#define _GTF_writing (4)
+#define GTF_writing (1U << _GTF_writing)
+#define _GTF_sub_page (8)
+#define GTF_sub_page (1U << _GTF_sub_page)
+
+/*
+ * Subflags for GTF_accept_transfer:
+ * GTF_transfer_committed: Xen sets this flag to indicate that it is committed
+ * to transferring ownership of a page frame. When a guest sees this flag
+ * it must /not/ modify the grant entry until GTF_transfer_completed is
+ * set by Xen.
+ * GTF_transfer_completed: It is safe for the guest to spin-wait on this flag
+ * after reading GTF_transfer_committed. Xen will always write the frame
+ * address, followed by ORing this flag, in a timely manner.
+ */
+#define _GTF_transfer_committed (2)
+#define GTF_transfer_committed (1U << _GTF_transfer_committed)
+#define _GTF_transfer_completed (3)
+#define GTF_transfer_completed (1U << _GTF_transfer_completed)
+
+/*
+ * Version 2 grant table entries. These fulfil the same role as
+ * version 1 entries, but can represent more complicated operations.
+ * Any given domain will have either a version 1 or a version 2 table,
+ * and every entry in the table will be the same version.
+ *
+ * The interface by which domains use grant references does not depend
+ * on the grant table version in use by the other domain.
+ */
+
+/*
+ * Version 1 and version 2 grant entries share a common prefix. The
+ * fields of the prefix are documented as part of struct
+ * grant_entry_v1.
+ */
+struct grant_entry_header {
+ u16 flags;
+ domid_t domid;
+};
+
+/*
+ * Version 2 of the grant entry structure, here is a union because three
+ * different types are suppotted: full_page, sub_page and transitive.
+ */
+union grant_entry_v2 {
+ struct grant_entry_header hdr;
+
+ /*
+ * This member is used for V1-style full page grants, where either:
+ *
+ * -- hdr.type is GTF_accept_transfer, or
+ * -- hdr.type is GTF_permit_access and GTF_sub_page is not set.
+ *
+ * In that case, the frame field has the same semantics as the
+ * field of the same name in the V1 entry structure.
+ */
+ struct {
+ struct grant_entry_header hdr;
+ u32 pad0;
+ u64 frame;
+ } full_page;
+
+ /*
+ * If the grant type is GTF_grant_access and GTF_sub_page is set,
+ * @domid is allowed to access bytes [@page_off,@page_off+@length)
+ * in frame @frame.
+ */
+ struct {
+ struct grant_entry_header hdr;
+ u16 page_off;
+ u16 length;
+ u64 frame;
+ } sub_page;
+
+ /*
+ * If the grant is GTF_transitive, @domid is allowed to use the
+ * grant @gref in domain @trans_domid, as if it was the local
+ * domain. Obviously, the transitive access must be compatible
+ * with the original grant.
+ */
+ struct {
+ struct grant_entry_header hdr;
+ domid_t trans_domid;
+ u16 pad0;
+ grant_ref_t gref;
+ } transitive;
+
+ u32 __spacer[4]; /* Pad to a power of two */
+};
+
+typedef u16 grant_status_t;
+
+/***********************************
+ * GRANT TABLE QUERIES AND USES
+ */
+
+/*
+ * Handle to track a mapping created via a grant reference.
+ */
+typedef u32 grant_handle_t;
+
+/*
+ * GNTTABOP_map_grant_ref: Map the grant entry (<dom>,<ref>) for access
+ * by devices and/or host CPUs. If successful, <handle> is a tracking number
+ * that must be presented later to destroy the mapping(s). On error, <handle>
+ * is a negative status code.
+ * NOTES:
+ * 1. If GNTMAP_device_map is specified then <dev_bus_addr> is the address
+ * via which I/O devices may access the granted frame.
+ * 2. If GNTMAP_host_map is specified then a mapping will be added at
+ * either a host virtual address in the current address space, or at
+ * a PTE at the specified machine address. The type of mapping to
+ * perform is selected through the GNTMAP_contains_pte flag, and the
+ * address is specified in <host_addr>.
+ * 3. Mappings should only be destroyed via GNTTABOP_unmap_grant_ref. If a
+ * host mapping is destroyed by other means then it is *NOT* guaranteed
+ * to be accounted to the correct grant reference!
+ */
+#define GNTTABOP_map_grant_ref 0
+struct gnttab_map_grant_ref {
+ /* IN parameters. */
+ u64 host_addr;
+ u32 flags; /* GNTMAP_* */
+ grant_ref_t ref;
+ domid_t dom;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+ grant_handle_t handle;
+ u64 dev_bus_addr;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_map_grant_ref);
+
+/*
+ * GNTTABOP_unmap_grant_ref: Destroy one or more grant-reference mappings
+ * tracked by <handle>. If <host_addr> or <dev_bus_addr> is zero, that
+ * field is ignored. If non-zero, they must refer to a device/host mapping
+ * that is tracked by <handle>
+ * NOTES:
+ * 1. The call may fail in an undefined manner if either mapping is not
+ * tracked by <handle>.
+ * 3. After executing a batch of unmaps, it is guaranteed that no stale
+ * mappings will remain in the device or host TLBs.
+ */
+#define GNTTABOP_unmap_grant_ref 1
+struct gnttab_unmap_grant_ref {
+ /* IN parameters. */
+ u64 host_addr;
+ u64 dev_bus_addr;
+ grant_handle_t handle;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_unmap_grant_ref);
+
+/*
+ * GNTTABOP_setup_table: Set up a grant table for <dom> comprising at least
+ * <nr_frames> pages. The frame addresses are written to the <frame_list>.
+ * Only <nr_frames> addresses are written, even if the table is larger.
+ * NOTES:
+ * 1. <dom> may be specified as DOMID_SELF.
+ * 2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ * 3. Xen may not support more than a single grant-table page per domain.
+ */
+#define GNTTABOP_setup_table 2
+struct gnttab_setup_table {
+ /* IN parameters. */
+ domid_t dom;
+ u32 nr_frames;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+
+ GUEST_HANDLE(xen_pfn_t)frame_list;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table);
+
+/*
+ * GNTTABOP_dump_table: Dump the contents of the grant table to the
+ * xen console. Debugging use only.
+ */
+#define GNTTABOP_dump_table 3
+struct gnttab_dump_table {
+ /* IN parameters. */
+ domid_t dom;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_dump_table);
+
+/*
+ * GNTTABOP_transfer_grant_ref: Transfer <frame> to a foreign domain. The
+ * foreign domain has previously registered its interest in the transfer via
+ * <domid, ref>.
+ *
+ * Note that, even if the transfer fails, the specified page no longer belongs
+ * to the calling domain *unless* the error is GNTST_bad_page.
+ */
+#define GNTTABOP_transfer 4
+struct gnttab_transfer {
+ /* IN parameters. */
+ xen_pfn_t mfn;
+ domid_t domid;
+ grant_ref_t ref;
+ /* OUT parameters. */
+ s16 status;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_transfer);
+
+/*
+ * GNTTABOP_copy: Hypervisor based copy
+ * source and destinations can be eithers MFNs or, for foreign domains,
+ * grant references. the foreign domain has to grant read/write access
+ * in its grant table.
+ *
+ * The flags specify what type source and destinations are (either MFN
+ * or grant reference).
+ *
+ * Note that this can also be used to copy data between two domains
+ * via a third party if the source and destination domains had previously
+ * grant appropriate access to their pages to the third party.
+ *
+ * source_offset specifies an offset in the source frame, dest_offset
+ * the offset in the target frame and len specifies the number of
+ * bytes to be copied.
+ */
+
+#define _GNTCOPY_source_gref (0)
+#define GNTCOPY_source_gref (1 << _GNTCOPY_source_gref)
+#define _GNTCOPY_dest_gref (1)
+#define GNTCOPY_dest_gref (1 << _GNTCOPY_dest_gref)
+
+#define GNTTABOP_copy 5
+struct gnttab_copy {
+ /* IN parameters. */
+ struct {
+ union {
+ grant_ref_t ref;
+ xen_pfn_t gmfn;
+ } u;
+ domid_t domid;
+ u16 offset;
+ } source, dest;
+ u16 len;
+ u16 flags; /* GNTCOPY_* */
+ /* OUT parameters. */
+ s16 status;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_copy);
+
+/*
+ * GNTTABOP_query_size: Query the current and maximum sizes of the shared
+ * grant table.
+ * NOTES:
+ * 1. <dom> may be specified as DOMID_SELF.
+ * 2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ */
+#define GNTTABOP_query_size 6
+struct gnttab_query_size {
+ /* IN parameters. */
+ domid_t dom;
+ /* OUT parameters. */
+ u32 nr_frames;
+ u32 max_nr_frames;
+ s16 status; /* GNTST_* */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_query_size);
+
+/*
+ * GNTTABOP_unmap_and_replace: Destroy one or more grant-reference mappings
+ * tracked by <handle> but atomically replace the page table entry with one
+ * pointing to the machine address under <new_addr>. <new_addr> will be
+ * redirected to the null entry.
+ * NOTES:
+ * 1. The call may fail in an undefined manner if either mapping is not
+ * tracked by <handle>.
+ * 2. After executing a batch of unmaps, it is guaranteed that no stale
+ * mappings will remain in the device or host TLBs.
+ */
+#define GNTTABOP_unmap_and_replace 7
+struct gnttab_unmap_and_replace {
+ /* IN parameters. */
+ u64 host_addr;
+ u64 new_addr;
+ grant_handle_t handle;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_unmap_and_replace);
+
+/*
+ * GNTTABOP_set_version: Request a particular version of the grant
+ * table shared table structure. This operation can only be performed
+ * once in any given domain. It must be performed before any grants
+ * are activated; otherwise, the domain will be stuck with version 1.
+ * The only defined versions are 1 and 2.
+ */
+#define GNTTABOP_set_version 8
+struct gnttab_set_version {
+ /* IN parameters */
+ u32 version;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_set_version);
+
+/*
+ * GNTTABOP_get_status_frames: Get the list of frames used to store grant
+ * status for <dom>. In grant format version 2, the status is separated
+ * from the other shared grant fields to allow more efficient synchronization
+ * using barriers instead of atomic cmpexch operations.
+ * <nr_frames> specify the size of vector <frame_list>.
+ * The frame addresses are returned in the <frame_list>.
+ * Only <nr_frames> addresses are returned, even if the table is larger.
+ * NOTES:
+ * 1. <dom> may be specified as DOMID_SELF.
+ * 2. Only a sufficiently-privileged domain may specify <dom> != DOMID_SELF.
+ */
+#define GNTTABOP_get_status_frames 9
+struct gnttab_get_status_frames {
+ /* IN parameters. */
+ u32 nr_frames;
+ domid_t dom;
+ /* OUT parameters. */
+ s16 status; /* GNTST_* */
+
+ GUEST_HANDLE(u64)frame_list;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_status_frames);
+
+/*
+ * GNTTABOP_get_version: Get the grant table version which is in
+ * effect for domain <dom>.
+ */
+#define GNTTABOP_get_version 10
+struct gnttab_get_version {
+ /* IN parameters */
+ domid_t dom;
+ u16 pad;
+ /* OUT parameters */
+ u32 version;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_get_version);
+
+/*
+ * Issue one or more cache maintenance operations on a portion of a
+ * page granted to the calling domain by a foreign domain.
+ */
+#define GNTTABOP_cache_flush 12
+struct gnttab_cache_flush {
+ union {
+ u64 dev_bus_addr;
+ grant_ref_t ref;
+ } a;
+ u16 offset; /* offset from start of grant */
+ u16 length; /* size within the grant */
+#define GNTTAB_CACHE_CLEAN (1 << 0)
+#define GNTTAB_CACHE_INVAL (1 << 1)
+#define GNTTAB_CACHE_SOURCE_GREF (1 << 31)
+ u32 op;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(gnttab_cache_flush);
+
+/*
+ * Bitfield values for update_pin_status.flags.
+ */
+ /* Map the grant entry for access by I/O devices. */
+#define _GNTMAP_device_map (0)
+#define GNTMAP_device_map (1 << _GNTMAP_device_map)
+/* Map the grant entry for access by host CPUs. */
+#define _GNTMAP_host_map (1)
+#define GNTMAP_host_map (1 << _GNTMAP_host_map)
+/* Accesses to the granted frame will be restricted to read-only access. */
+#define _GNTMAP_readonly (2)
+#define GNTMAP_readonly (1 << _GNTMAP_readonly)
+/*
+ * GNTMAP_host_map subflag:
+ * 0 => The host mapping is usable only by the guest OS.
+ * 1 => The host mapping is usable by guest OS + current application.
+ */
+#define _GNTMAP_application_map (3)
+#define GNTMAP_application_map (1 << _GNTMAP_application_map)
+
+/*
+ * GNTMAP_contains_pte subflag:
+ * 0 => This map request contains a host virtual address.
+ * 1 => This map request contains the machine addess of the PTE to update.
+ */
+#define _GNTMAP_contains_pte (4)
+#define GNTMAP_contains_pte (1 << _GNTMAP_contains_pte)
+
+/*
+ * Bits to be placed in guest kernel available PTE bits (architecture
+ * dependent; only supported when XENFEAT_gnttab_map_avail_bits is set).
+ */
+#define _GNTMAP_guest_avail0 (16)
+#define GNTMAP_guest_avail_mask ((u32)~0 << _GNTMAP_guest_avail0)
+
+/*
+ * Values for error status returns. All errors are -ve.
+ */
+#define GNTST_okay (0) /* Normal return. */
+#define GNTST_general_error (-1) /* General undefined error. */
+#define GNTST_bad_domain (-2) /* Unrecognsed domain id. */
+#define GNTST_bad_gntref (-3) /* Unrecognised or inappropriate gntref. */
+#define GNTST_bad_handle (-4) /* Unrecognised or inappropriate handle. */
+#define GNTST_bad_virt_addr (-5) /* Inappropriate virtual address to map. */
+#define GNTST_bad_dev_addr (-6) /* Inappropriate device address to unmap.*/
+#define GNTST_no_device_space (-7) /* Out of space in I/O MMU. */
+#define GNTST_permission_denied (-8) /* Not enough privilege for operation. */
+#define GNTST_bad_page (-9) /* Specified page was invalid for op. */
+#define GNTST_bad_copy_arg (-10) /* copy arguments cross page boundary. */
+#define GNTST_address_too_big (-11) /* transfer page address too large. */
+#define GNTST_eagain (-12) /* Operation not done; try again. */
+
+#define GNTTABOP_error_msgs { \
+ "okay", \
+ "undefined error", \
+ "unrecognised domain id", \
+ "invalid grant reference", \
+ "invalid mapping handle", \
+ "invalid virtual address", \
+ "invalid device address", \
+ "no spare translation slot in the I/O MMU", \
+ "permission denied", \
+ "bad page", \
+ "copy arguments cross page boundary", \
+ "page address size too large", \
+ "operation not done; try again" \
+}
+
+#endif /* __XEN_PUBLIC_GRANT_TABLE_H__ */
diff --git a/include/xen/interface/hvm/hvm_op.h b/include/xen/interface/hvm/hvm_op.h
new file mode 100644
index 0000000..605d943
--- /dev/null
+++ b/include/xen/interface/hvm/hvm_op.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * hvm_op.h
+ *
+ * Copyright (c) 2007, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_HVM_HVM_OP_H__
+#define __XEN_PUBLIC_HVM_HVM_OP_H__
+
+/* Get/set subcommands: the second argument of the hypercall is a
+ * pointer to a xen_hvm_param struct.
+ */
+#define HVMOP_set_param 0
+#define HVMOP_get_param 1
+struct xen_hvm_param {
+ domid_t domid; /* IN */
+ u32 index; /* IN */
+ u64 value; /* IN/OUT */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_param);
+
+/* Hint from PV drivers for pagetable destruction. */
+#define HVMOP_pagetable_dying 9
+struct xen_hvm_pagetable_dying {
+ /* Domain with a pagetable about to be destroyed. */
+ domid_t domid;
+ /* guest physical address of the toplevel pagetable dying */
+ aligned_u64 gpa;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_pagetable_dying);
+
+enum hvmmem_type_t {
+ HVMMEM_ram_rw, /* Normal read/write guest RAM */
+ HVMMEM_ram_ro, /* Read-only; writes are discarded */
+ HVMMEM_mmio_dm, /* Reads and write go to the device model */
+};
+
+#define HVMOP_get_mem_type 15
+/* Return hvmmem_type_t for the specified pfn. */
+struct xen_hvm_get_mem_type {
+ /* Domain to be queried. */
+ domid_t domid;
+ /* OUT variable. */
+ u16 mem_type;
+ u16 pad[2]; /* align next field on 8-byte boundary */
+ /* IN variable. */
+ u64 pfn;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_get_mem_type);
+
+#endif /* __XEN_PUBLIC_HVM_HVM_OP_H__ */
diff --git a/include/xen/interface/hvm/params.h b/include/xen/interface/hvm/params.h
new file mode 100644
index 0000000..a81bb5e
--- /dev/null
+++ b/include/xen/interface/hvm/params.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * params.h
+ *
+ * HVM parameters. HVM (Hardware Virtual Machine) is the type of instance
+ * that mimics bare-metal server setup which provides better hardware
+ * isolation.
+ */
+
+#ifndef __XEN_PUBLIC_HVM_PARAMS_H__
+#define __XEN_PUBLIC_HVM_PARAMS_H__
+
+#include <xen/interface/hvm/hvm_op.h>
+
+/*
+ * Parameter space for HVMOP_{set,get}_param.
+ */
+
+#define HVM_PARAM_CALLBACK_IRQ 0
+/*
+ * How should CPU0 event-channel notifications be delivered?
+ *
+ * If val == 0 then CPU0 event-channel notifications are not delivered.
+ * If val != 0, val[63:56] encodes the type, as follows:
+ */
+
+#define HVM_PARAM_CALLBACK_TYPE_GSI 0
+/*
+ * val[55:0] is a delivery GSI. GSI 0 cannot be used, as it aliases val == 0,
+ * and disables all notifications.
+ */
+
+#define HVM_PARAM_CALLBACK_TYPE_PCI_INTX 1
+/*
+ * val[55:0] is a delivery PCI INTx line:
+ * Domain = val[47:32], Bus = val[31:16] DevFn = val[15:8], IntX = val[1:0]
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+#define HVM_PARAM_CALLBACK_TYPE_VECTOR 2
+/*
+ * val[7:0] is a vector number. Check for XENFEAT_hvm_callback_vector to know
+ * if this delivery method is available.
+ */
+#elif defined(__arm__) || defined(__aarch64__)
+#define HVM_PARAM_CALLBACK_TYPE_PPI 2
+/*
+ * val[55:16] needs to be zero.
+ * val[15:8] is interrupt flag of the PPI used by event-channel:
+ * bit 8: the PPI is edge(1) or level(0) triggered
+ * bit 9: the PPI is active low(1) or high(0)
+ * val[7:0] is a PPI number used by event-channel.
+ * This is only used by ARM/ARM64 and masking/eoi the interrupt associated to
+ * the notification is handled by the interrupt controller.
+ */
+#endif
+
+#define HVM_PARAM_STORE_PFN 1
+#define HVM_PARAM_STORE_EVTCHN 2
+
+#define HVM_PARAM_PAE_ENABLED 4
+
+#define HVM_PARAM_IOREQ_PFN 5
+
+#define HVM_PARAM_BUFIOREQ_PFN 6
+
+/*
+ * Set mode for virtual timers (currently x86 only):
+ * delay_for_missed_ticks (default):
+ * Do not advance a vcpu's time beyond the correct delivery time for
+ * interrupts that have been missed due to preemption. Deliver missed
+ * interrupts when the vcpu is rescheduled and advance the vcpu's virtual
+ * time stepwise for each one.
+ * no_delay_for_missed_ticks:
+ * As above, missed interrupts are delivered, but guest time always tracks
+ * wallclock (i.e., real) time while doing so.
+ * no_missed_ticks_pending:
+ * No missed interrupts are held pending. Instead, to ensure ticks are
+ * delivered at some non-zero rate, if we detect missed ticks then the
+ * internal tick alarm is not disabled if the VCPU is preempted during the
+ * next tick period.
+ * one_missed_tick_pending:
+ * Missed interrupts are collapsed together and delivered as one 'late tick'.
+ * Guest time always tracks wallclock (i.e., real) time.
+ */
+#define HVM_PARAM_TIMER_MODE 10
+#define HVMPTM_delay_for_missed_ticks 0
+#define HVMPTM_no_delay_for_missed_ticks 1
+#define HVMPTM_no_missed_ticks_pending 2
+#define HVMPTM_one_missed_tick_pending 3
+
+/* Boolean: Enable virtual HPET (high-precision event timer)? (x86-only) */
+#define HVM_PARAM_HPET_ENABLED 11
+
+/* Identity-map page directory used by Intel EPT when CR0.PG=0. */
+#define HVM_PARAM_IDENT_PT 12
+
+/* Device Model domain, defaults to 0. */
+#define HVM_PARAM_DM_DOMAIN 13
+
+/* ACPI S state: currently support S0 and S3 on x86. */
+#define HVM_PARAM_ACPI_S_STATE 14
+
+/* TSS used on Intel when CR0.PE=0. */
+#define HVM_PARAM_VM86_TSS 15
+
+/* Boolean: Enable aligning all periodic vpts to reduce interrupts */
+#define HVM_PARAM_VPT_ALIGN 16
+
+/* Console debug shared memory ring and event channel */
+#define HVM_PARAM_CONSOLE_PFN 17
+#define HVM_PARAM_CONSOLE_EVTCHN 18
+
+#define HVM_NR_PARAMS 19
+
+#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
new file mode 100644
index 0000000..38b4d7c
--- /dev/null
+++ b/include/xen/interface/io/blkif.h
@@ -0,0 +1,701 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * blkif.h
+ *
+ * Unified block-device I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2003-2004, Keir Fraser
+ * Copyright (c) 2012, Spectra Logic Corporation
+ */
+
+#ifndef __XEN_PUBLIC_IO_BLKIF_H__
+#define __XEN_PUBLIC_IO_BLKIF_H__
+
+#include "ring.h"
+#include "../grant_table.h"
+
+/*
+ * Front->back notifications: When enqueuing a new request, sending a
+ * notification can be made conditional on req_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Backends must set
+ * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
+ *
+ * Back->front notifications: When enqueuing a new response, sending a
+ * notification can be made conditional on rsp_event (i.e., the generic
+ * hold-off mechanism provided by the ring macros). Frontends must set
+ * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
+ */
+
+#ifndef blkif_vdev_t
+#define blkif_vdev_t u16
+#endif
+#define blkif_sector_t u64
+
+/*
+ * Feature and Parameter Negotiation
+ * =================================
+ * The two halves of a Xen block driver utilize nodes within the XenStore to
+ * communicate capabilities and to negotiate operating parameters. This
+ * section enumerates these nodes which reside in the respective front and
+ * backend portions of the XenStore, following the XenBus convention.
+ *
+ * All data in the XenStore is stored as strings. Nodes specifying numeric
+ * values are encoded in decimal. Integer value ranges listed below are
+ * expressed as fixed sized integer types capable of storing the conversion
+ * of a properly formated node string, without loss of information.
+ *
+ * Any specified default value is in effect if the corresponding XenBus node
+ * is not present in the XenStore.
+ *
+ * XenStore nodes in sections marked "PRIVATE" are solely for use by the
+ * driver side whose XenBus tree contains them.
+ *
+ * XenStore nodes marked "DEPRECATED" in their notes section should only be
+ * used to provide interoperability with legacy implementations.
+ *
+ * See the XenBus state transition diagram below for details on when XenBus
+ * nodes must be published and when they can be queried.
+ *
+ *****************************************************************************
+ * Backend XenBus Nodes
+ *****************************************************************************
+ *
+ *------------------ Backend Device Identification (PRIVATE) ------------------
+ *
+ * mode
+ * Values: "r" (read only), "w" (writable)
+ *
+ * The read or write access permissions to the backing store to be
+ * granted to the frontend.
+ *
+ * params
+ * Values: string
+ *
+ * A free formatted string providing sufficient information for the
+ * hotplug script to attach the device and provide a suitable
+ * handler (ie: a block device) for blkback to use.
+ *
+ * physical-device
+ * Values: "MAJOR:MINOR"
+ * Notes: 11
+ *
+ * MAJOR and MINOR are the major number and minor number of the
+ * backing device respectively.
+ *
+ * physical-device-path
+ * Values: path string
+ *
+ * A string that contains the absolute path to the disk image. On
+ * NetBSD and Linux this is always a block device, while on FreeBSD
+ * it can be either a block device or a regular file.
+ *
+ * type
+ * Values: "file", "phy", "tap"
+ *
+ * The type of the backing device/object.
+ *
+ *
+ * direct-io-safe
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ *
+ * The underlying storage is not affected by the direct IO memory
+ * lifetime bug. See:
+ * http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
+ *
+ * Therefore this option gives the backend permission to use
+ * O_DIRECT, notwithstanding that bug.
+ *
+ * That is, if this option is enabled, use of O_DIRECT is safe,
+ * in circumstances where we would normally have avoided it as a
+ * workaround for that bug. This option is not relevant for all
+ * backends, and even not necessarily supported for those for
+ * which it is relevant. A backend which knows that it is not
+ * affected by the bug can ignore this option.
+ *
+ * This option doesn't require a backend to use O_DIRECT, so it
+ * should not be used to try to control the caching behaviour.
+ *
+ *--------------------------------- Features ---------------------------------
+ *
+ * feature-barrier
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ *
+ * A value of "1" indicates that the backend can process requests
+ * containing the BLKIF_OP_WRITE_BARRIER request opcode. Requests
+ * of this type may still be returned at any time with the
+ * BLKIF_RSP_EOPNOTSUPP result code.
+ *
+ * feature-flush-cache
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ *
+ * A value of "1" indicates that the backend can process requests
+ * containing the BLKIF_OP_FLUSH_DISKCACHE request opcode. Requests
+ * of this type may still be returned at any time with the
+ * BLKIF_RSP_EOPNOTSUPP result code.
+ *
+ * feature-discard
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ *
+ * A value of "1" indicates that the backend can process requests
+ * containing the BLKIF_OP_DISCARD request opcode. Requests
+ * of this type may still be returned at any time with the
+ * BLKIF_RSP_EOPNOTSUPP result code.
+ *
+ * feature-persistent
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ * Notes: 7
+ *
+ * A value of "1" indicates that the backend can keep the grants used
+ * by the frontend driver mapped, so the same set of grants should be
+ * used in all transactions. The maximum number of grants the backend
+ * can map persistently depends on the implementation, but ideally it
+ * should be RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST. Using this
+ * feature the backend doesn't need to unmap each grant, preventing
+ * costly TLB flushes. The backend driver should only map grants
+ * persistently if the frontend supports it. If a backend driver chooses
+ * to use the persistent protocol when the frontend doesn't support it,
+ * it will probably hit the maximum number of persistently mapped grants
+ * (due to the fact that the frontend won't be reusing the same grants),
+ * and fall back to non-persistent mode. Backend implementations may
+ * shrink or expand the number of persistently mapped grants without
+ * notifying the frontend depending on memory constraints (this might
+ * cause a performance degradation).
+ *
+ * If a backend driver wants to limit the maximum number of persistently
+ * mapped grants to a value less than RING_SIZE *
+ * BLKIF_MAX_SEGMENTS_PER_REQUEST a LRU strategy should be used to
+ * discard the grants that are less commonly used. Using a LRU in the
+ * backend driver paired with a LIFO queue in the frontend will
+ * allow us to have better performance in this scenario.
+ *
+ *----------------------- Request Transport Parameters ------------------------
+ *
+ * max-ring-page-order
+ * Values: <uint32_t>
+ * Default Value: 0
+ * Notes: 1, 3
+ *
+ * The maximum supported size of the request ring buffer in units of
+ * lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages,
+ * etc.).
+ *
+ * max-ring-pages
+ * Values: <uint32_t>
+ * Default Value: 1
+ * Notes: DEPRECATED, 2, 3
+ *
+ * The maximum supported size of the request ring buffer in units of
+ * machine pages. The value must be a power of 2.
+ *
+ *------------------------- Backend Device Properties -------------------------
+ *
+ * discard-enable
+ * Values: 0/1 (boolean)
+ * Default Value: 1
+ *
+ * This optional property, set by the toolstack, instructs the backend
+ * to offer (or not to offer) discard to the frontend. If the property
+ * is missing the backend should offer discard if the backing storage
+ * actually supports it.
+ *
+ * discard-alignment
+ * Values: <uint32_t>
+ * Default Value: 0
+ * Notes: 4, 5
+ *
+ * The offset, in bytes from the beginning of the virtual block device,
+ * to the first, addressable, discard extent on the underlying device.
+ *
+ * discard-granularity
+ * Values: <uint32_t>
+ * Default Value: <"sector-size">
+ * Notes: 4
+ *
+ * The size, in bytes, of the individually addressable discard extents
+ * of the underlying device.
+ *
+ * discard-secure
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ * Notes: 10
+ *
+ * A value of "1" indicates that the backend can process BLKIF_OP_DISCARD
+ * requests with the BLKIF_DISCARD_SECURE flag set.
+ *
+ * info
+ * Values: <uint32_t> (bitmap)
+ *
+ * A collection of bit flags describing attributes of the backing
+ * device. The VDISK_* macros define the meaning of each bit
+ * location.
+ *
+ * sector-size
+ * Values: <uint32_t>
+ *
+ * The logical block size, in bytes, of the underlying storage. This
+ * must be a power of two with a minimum value of 512.
+ *
+ * NOTE: Because of implementation bugs in some frontends this must be
+ * set to 512, unless the frontend advertizes a non-zero value
+ * in its "feature-large-sector-size" xenbus node. (See below).
+ *
+ * physical-sector-size
+ * Values: <uint32_t>
+ * Default Value: <"sector-size">
+ *
+ * The physical block size, in bytes, of the backend storage. This
+ * must be an integer multiple of "sector-size".
+ *
+ * sectors
+ * Values: <u64>
+ *
+ * The size of the backend device, expressed in units of "sector-size".
+ * The product of "sector-size" and "sectors" must also be an integer
+ * multiple of "physical-sector-size", if that node is present.
+ *
+ *****************************************************************************
+ * Frontend XenBus Nodes
+ *****************************************************************************
+ *
+ *----------------------- Request Transport Parameters -----------------------
+ *
+ * event-channel
+ * Values: <uint32_t>
+ *
+ * The identifier of the Xen event channel used to signal activity
+ * in the ring buffer.
+ *
+ * ring-ref
+ * Values: <uint32_t>
+ * Notes: 6
+ *
+ * The Xen grant reference granting permission for the backend to map
+ * the sole page in a single page sized ring buffer.
+ *
+ * ring-ref%u
+ * Values: <uint32_t>
+ * Notes: 6
+ *
+ * For a frontend providing a multi-page ring, a "number of ring pages"
+ * sized list of nodes, each containing a Xen grant reference granting
+ * permission for the backend to map the page of the ring located
+ * at page index "%u". Page indexes are zero based.
+ *
+ * protocol
+ * Values: string (XEN_IO_PROTO_ABI_*)
+ * Default Value: XEN_IO_PROTO_ABI_NATIVE
+ *
+ * The machine ABI rules governing the format of all ring request and
+ * response structures.
+ *
+ * ring-page-order
+ * Values: <uint32_t>
+ * Default Value: 0
+ * Maximum Value: MAX(ffs(max-ring-pages) - 1, max-ring-page-order)
+ * Notes: 1, 3
+ *
+ * The size of the frontend allocated request ring buffer in units
+ * of lb(machine pages). (e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages,
+ * etc.).
+ *
+ * num-ring-pages
+ * Values: <uint32_t>
+ * Default Value: 1
+ * Maximum Value: MAX(max-ring-pages,(0x1 << max-ring-page-order))
+ * Notes: DEPRECATED, 2, 3
+ *
+ * The size of the frontend allocated request ring buffer in units of
+ * machine pages. The value must be a power of 2.
+ *
+ *--------------------------------- Features ---------------------------------
+ *
+ * feature-persistent
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ * Notes: 7, 8, 9
+ *
+ * A value of "1" indicates that the frontend will reuse the same grants
+ * for all transactions, allowing the backend to map them with write
+ * access (even when it should be read-only). If the frontend hits the
+ * maximum number of allowed persistently mapped grants, it can fallback
+ * to non persistent mode. This will cause a performance degradation,
+ * since the the backend driver will still try to map those grants
+ * persistently. Since the persistent grants protocol is compatible with
+ * the previous protocol, a frontend driver can choose to work in
+ * persistent mode even when the backend doesn't support it.
+ *
+ * It is recommended that the frontend driver stores the persistently
+ * mapped grants in a LIFO queue, so a subset of all persistently mapped
+ * grants gets used commonly. This is done in case the backend driver
+ * decides to limit the maximum number of persistently mapped grants
+ * to a value less than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST.
+ *
+ * feature-large-sector-size
+ * Values: 0/1 (boolean)
+ * Default Value: 0
+ *
+ * A value of "1" indicates that the frontend will correctly supply and
+ * interpret all sector-based quantities in terms of the "sector-size"
+ * value supplied in the backend info, whatever that may be set to.
+ * If this node is not present or its value is "0" then it is assumed
+ * that the frontend requires that the logical block size is 512 as it
+ * is hardcoded (which is the case in some frontend implementations).
+ *
+ *------------------------- Virtual Device Properties -------------------------
+ *
+ * device-type
+ * Values: "disk", "cdrom", "floppy", etc.
+ *
+ * virtual-device
+ * Values: <uint32_t>
+ *
+ * A value indicating the physical device to virtualize within the
+ * frontend's domain. (e.g. "The first ATA disk", "The third SCSI
+ * disk", etc.)
+ *
+ * See docs/misc/vbd-interface.txt for details on the format of this
+ * value.
+ *
+ * Notes
+ * -----
+ * (1) Multi-page ring buffer scheme first developed in the Citrix XenServer
+ * PV drivers.
+ * (2) Multi-page ring buffer scheme first used in some RedHat distributions
+ * including a distribution deployed on certain nodes of the Amazon
+ * EC2 cluster.
+ * (3) Support for multi-page ring buffers was implemented independently,
+ * in slightly different forms, by both Citrix and RedHat/Amazon.
+ * For full interoperability, block front and backends should publish
+ * identical ring parameters, adjusted for unit differences, to the
+ * XenStore nodes used in both schemes.
+ * (4) Devices that support discard functionality may internally allocate space
+ * (discardable extents) in units that are larger than the exported logical
+ * block size. If the backing device has such discardable extents the
+ * backend should provide both discard-granularity and discard-alignment.
+ * Providing just one of the two may be considered an error by the frontend.
+ * Backends supporting discard should include discard-granularity and
+ * discard-alignment even if it supports discarding individual sectors.
+ * Frontends should assume discard-alignment == 0 and discard-granularity
+ * == sector size if these keys are missing.
+ * (5) The discard-alignment parameter allows a physical device to be
+ * partitioned into virtual devices that do not necessarily begin or
+ * end on a discardable extent boundary.
+ * (6) When there is only a single page allocated to the request ring,
+ * 'ring-ref' is used to communicate the grant reference for this
+ * page to the backend. When using a multi-page ring, the 'ring-ref'
+ * node is not created. Instead 'ring-ref0' - 'ring-refN' are used.
+ * (7) When using persistent grants data has to be copied from/to the page
+ * where the grant is currently mapped. The overhead of doing this copy
+ * however doesn't suppress the speed improvement of not having to unmap
+ * the grants.
+ * (8) The frontend driver has to allow the backend driver to map all grants
+ * with write access, even when they should be mapped read-only, since
+ * further requests may reuse these grants and require write permissions.
+ * (9) Linux implementation doesn't have a limit on the maximum number of
+ * grants that can be persistently mapped in the frontend driver, but
+ * due to the frontent driver implementation it should never be bigger
+ * than RING_SIZE * BLKIF_MAX_SEGMENTS_PER_REQUEST.
+ *(10) The discard-secure property may be present and will be set to 1 if the
+ * backing device supports secure discard.
+ *(11) Only used by Linux and NetBSD.
+ */
+
+/*
+ * Multiple hardware queues/rings:
+ * If supported, the backend will write the key "multi-queue-max-queues" to
+ * the directory for that vbd, and set its value to the maximum supported
+ * number of queues.
+ * Frontends that are aware of this feature and wish to use it can write the
+ * key "multi-queue-num-queues" with the number they wish to use, which must be
+ * greater than zero, and no more than the value reported by the backend in
+ * "multi-queue-max-queues".
+ *
+ * For frontends requesting just one queue, the usual event-channel and
+ * ring-ref keys are written as before, simplifying the backend processing
+ * to avoid distinguishing between a frontend that doesn't understand the
+ * multi-queue feature, and one that does, but requested only one queue.
+ *
+ * Frontends requesting two or more queues must not write the toplevel
+ * event-channel and ring-ref keys, instead writing those keys under sub-keys
+ * having the name "queue-N" where N is the integer ID of the queue/ring for
+ * which those keys belong. Queues are indexed from zero.
+ * For example, a frontend with two queues must write the following set of
+ * queue-related keys:
+ *
+ * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vbd/0/queue-0 = ""
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref = "<ring-ref#0>"
+ * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>"
+ * /local/domain/1/device/vbd/0/queue-1 = ""
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref = "<ring-ref#1>"
+ * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>"
+ *
+ * It is also possible to use multiple queues/rings together with
+ * feature multi-page ring buffer.
+ * For example, a frontend requests two queues/rings and the size of each ring
+ * buffer is two pages must write the following set of related keys:
+ *
+ * /local/domain/1/device/vbd/0/multi-queue-num-queues = "2"
+ * /local/domain/1/device/vbd/0/ring-page-order = "1"
+ * /local/domain/1/device/vbd/0/queue-0 = ""
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref0 = "<ring-ref#0>"
+ * /local/domain/1/device/vbd/0/queue-0/ring-ref1 = "<ring-ref#1>"
+ * /local/domain/1/device/vbd/0/queue-0/event-channel = "<evtchn#0>"
+ * /local/domain/1/device/vbd/0/queue-1 = ""
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref0 = "<ring-ref#2>"
+ * /local/domain/1/device/vbd/0/queue-1/ring-ref1 = "<ring-ref#3>"
+ * /local/domain/1/device/vbd/0/queue-1/event-channel = "<evtchn#1>"
+ *
+ */
+
+/*
+ * STATE DIAGRAMS
+ *
+ *****************************************************************************
+ * Startup *
+ *****************************************************************************
+ *
+ * Tool stack creates front and back nodes with state XenbusStateInitialising.
+ *
+ * Front Back
+ * ================================= =====================================
+ * XenbusStateInitialising XenbusStateInitialising
+ * o Query virtual device o Query backend device identification
+ * properties. data.
+ * o Setup OS device instance. o Open and validate backend device.
+ * o Publish backend features and
+ * transport parameters.
+ * |
+ * |
+ * V
+ * XenbusStateInitWait
+ *
+ * o Query backend features and
+ * transport parameters.
+ * o Allocate and initialize the
+ * request ring.
+ * o Publish transport parameters
+ * that will be in effect during
+ * this connection.
+ * |
+ * |
+ * V
+ * XenbusStateInitialised
+ *
+ * o Query frontend transport parameters.
+ * o Connect to the request ring and
+ * event channel.
+ * o Publish backend device properties.
+ * |
+ * |
+ * V
+ * XenbusStateConnected
+ *
+ * o Query backend device properties.
+ * o Finalize OS virtual device
+ * instance.
+ * |
+ * |
+ * V
+ * XenbusStateConnected
+ *
+ * Note: Drivers that do not support any optional features, or the negotiation
+ * of transport parameters, can skip certain states in the state machine:
+ *
+ * o A frontend may transition to XenbusStateInitialised without
+ * waiting for the backend to enter XenbusStateInitWait. In this
+ * case, default transport parameters are in effect and any
+ * transport parameters published by the frontend must contain
+ * their default values.
+ *
+ * o A backend may transition to XenbusStateInitialised, bypassing
+ * XenbusStateInitWait, without waiting for the frontend to first
+ * enter the XenbusStateInitialised state. In this case, default
+ * transport parameters are in effect and any transport parameters
+ * published by the backend must contain their default values.
+ *
+ * Drivers that support optional features and/or transport parameter
+ * negotiation must tolerate these additional state transition paths.
+ * In general this means performing the work of any skipped state
+ * transition, if it has not already been performed, in addition to the
+ * work associated with entry into the current state.
+ */
+
+/*
+ * REQUEST CODES.
+ */
+#define BLKIF_OP_READ 0
+#define BLKIF_OP_WRITE 1
+/*
+ * All writes issued prior to a request with the BLKIF_OP_WRITE_BARRIER
+ * operation code ("barrier request") must be completed prior to the
+ * execution of the barrier request. All writes issued after the barrier
+ * request must not execute until after the completion of the barrier request.
+ *
+ * Optional. See "feature-barrier" XenBus node documentation above.
+ */
+#define BLKIF_OP_WRITE_BARRIER 2
+/*
+ * Commit any uncommitted contents of the backing device's volatile cache
+ * to stable storage.
+ *
+ * Optional. See "feature-flush-cache" XenBus node documentation above.
+ */
+#define BLKIF_OP_FLUSH_DISKCACHE 3
+/*
+ * Used in SLES sources for device specific command packet
+ * contained within the request. Reserved for that purpose.
+ */
+#define BLKIF_OP_RESERVED_1 4
+/*
+ * Indicate to the backend device that a region of storage is no longer in
+ * use, and may be discarded at any time without impact to the client. If
+ * the BLKIF_DISCARD_SECURE flag is set on the request, all copies of the
+ * discarded region on the device must be rendered unrecoverable before the
+ * command returns.
+ *
+ * This operation is analogous to performing a trim (ATA) or unamp (SCSI),
+ * command on a native device.
+ *
+ * More information about trim/unmap operations can be found at:
+ * http://t13.org/Documents/UploadedDocuments/docs2008/
+ * e07154r6-Data_Set_Management_Proposal_for_ATA-ACS2.doc
+ * http://www.seagate.com/staticfiles/support/disc/manuals/
+ * Interface%20manuals/100293068c.pdf
+ *
+ * Optional. See "feature-discard", "discard-alignment",
+ * "discard-granularity", and "discard-secure" in the XenBus node
+ * documentation above.
+ */
+#define BLKIF_OP_DISCARD 5
+
+/*
+ * Recognized if "feature-max-indirect-segments" in present in the backend
+ * xenbus info. The "feature-max-indirect-segments" node contains the maximum
+ * number of segments allowed by the backend per request. If the node is
+ * present, the frontend might use blkif_request_indirect structs in order to
+ * issue requests with more than BLKIF_MAX_SEGMENTS_PER_REQUEST (11). The
+ * maximum number of indirect segments is fixed by the backend, but the
+ * frontend can issue requests with any number of indirect segments as long as
+ * it's less than the number provided by the backend. The indirect_grefs field
+ * in blkif_request_indirect should be filled by the frontend with the
+ * grant references of the pages that are holding the indirect segments.
+ * These pages are filled with an array of blkif_request_segment that hold the
+ * information about the segments. The number of indirect pages to use is
+ * determined by the number of segments an indirect request contains. Every
+ * indirect page can contain a maximum of
+ * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to
+ * calculate the number of indirect pages to use we have to do
+ * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))).
+ *
+ * If a backend does not recognize BLKIF_OP_INDIRECT, it should *not*
+ * create the "feature-max-indirect-segments" node!
+ */
+#define BLKIF_OP_INDIRECT 6
+
+/*
+ * Maximum scatter/gather segments per request.
+ * This is carefully chosen so that sizeof(blkif_ring_t) <= PAGE_SIZE.
+ * NB. This could be 12 if the ring indexes weren't stored in the same page.
+ */
+#define BLKIF_MAX_SEGMENTS_PER_REQUEST 11
+
+/*
+ * Maximum number of indirect pages to use per request.
+ */
+#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8
+
+/*
+ * NB. 'first_sect' and 'last_sect' in blkif_request_segment, as well as
+ * 'sector_number' in blkif_request, blkif_request_discard and
+ * blkif_request_indirect are sector-based quantities. See the description
+ * of the "feature-large-sector-size" frontend xenbus node above for
+ * more information.
+ */
+struct blkif_request_segment {
+ grant_ref_t gref; /* reference to I/O buffer frame */
+ /* @first_sect: first sector in frame to transfer (inclusive). */
+ /* @last_sect: last sector in frame to transfer (inclusive). */
+ u8 first_sect, last_sect;
+};
+
+/*
+ * Starting ring element for any I/O request.
+ */
+struct blkif_request {
+ u8 operation; /* BLKIF_OP_??? */
+ u8 nr_segments; /* number of segments */
+ blkif_vdev_t handle; /* only for read/write requests */
+ u64 id; /* private guest value, echoed in resp */
+ blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */
+ struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+};
+
+/*
+ * Cast to this structure when blkif_request.operation == BLKIF_OP_DISCARD
+ * sizeof(struct blkif_request_discard) <= sizeof(struct blkif_request)
+ */
+struct blkif_request_discard {
+ u8 operation; /* BLKIF_OP_DISCARD */
+ u8 flag; /* BLKIF_DISCARD_SECURE or zero */
+#define BLKIF_DISCARD_SECURE (1 << 0) /* ignored if discard-secure=0 */
+ blkif_vdev_t handle; /* same as for read/write requests */
+ u64 id; /* private guest value, echoed in resp */
+ blkif_sector_t sector_number;/* start sector idx on disk */
+ u64 nr_sectors; /* number of contiguous sectors to discard*/
+};
+
+struct blkif_request_indirect {
+ u8 operation; /* BLKIF_OP_INDIRECT */
+ u8 indirect_op; /* BLKIF_OP_{READ/WRITE} */
+ u16 nr_segments; /* number of segments */
+ u64 id; /* private guest value, echoed in resp */
+ blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */
+ blkif_vdev_t handle; /* same as for read/write requests */
+ grant_ref_t indirect_grefs[BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST];
+#ifdef __i386__
+ u64 pad; /* Make it 64 byte aligned on i386 */
+#endif
+};
+
+struct blkif_response {
+ u64 id; /* copied from request */
+ u8 operation; /* copied from request */
+ s16 status; /* BLKIF_RSP_??? */
+};
+
+/*
+ * STATUS RETURN CODES.
+ */
+ /* Operation not supported (only happens on barrier writes). */
+#define BLKIF_RSP_EOPNOTSUPP -2
+ /* Operation failed for some unspecified reason (-EIO). */
+#define BLKIF_RSP_ERROR -1
+ /* Operation completed successfully. */
+#define BLKIF_RSP_OKAY 0
+
+/*
+ * Generate blkif ring structures and types.
+ */
+DEFINE_RING_TYPES(blkif, struct blkif_request, struct blkif_response);
+
+#define VDISK_CDROM 0x1
+#define VDISK_REMOVABLE 0x2
+#define VDISK_READONLY 0x4
+
+#endif /* __XEN_PUBLIC_IO_BLKIF_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/io/console.h b/include/xen/interface/io/console.h
new file mode 100644
index 0000000..d4dccc7
--- /dev/null
+++ b/include/xen/interface/io/console.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * console.h
+ *
+ * Console I/O interface for Xen guest OSes.
+ *
+ * Copyright (c) 2005, Keir Fraser
+ */
+
+#ifndef __XEN_PUBLIC_IO_CONSOLE_H__
+#define __XEN_PUBLIC_IO_CONSOLE_H__
+
+typedef u32 XENCONS_RING_IDX;
+
+#define MASK_XENCONS_IDX(idx, ring) ((idx) & (sizeof(ring) - 1))
+
+struct xencons_interface {
+ char in[1024];
+ char out[2048];
+ XENCONS_RING_IDX in_cons, in_prod;
+ XENCONS_RING_IDX out_cons, out_prod;
+};
+
+#ifdef XEN_WANT_FLEX_CONSOLE_RING
+#include "ring.h"
+DEFINE_XEN_FLEX_RING(xencons);
+#endif
+
+#endif /* __XEN_PUBLIC_IO_CONSOLE_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/io/protocols.h b/include/xen/interface/io/protocols.h
new file mode 100644
index 0000000..5aa0aaa
--- /dev/null
+++ b/include/xen/interface/io/protocols.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * protocols.h
+ *
+ * Copyright (c) 2008, Keir Fraser
+ *
+ * Xen protocols, which are used as ABI rules governing the format of all
+ * ring request and response structures.
+ */
+
+#ifndef __XEN_PROTOCOLS_H__
+#define __XEN_PROTOCOLS_H__
+
+#define XEN_IO_PROTO_ABI_X86_32 "x86_32-abi"
+#define XEN_IO_PROTO_ABI_X86_64 "x86_64-abi"
+#define XEN_IO_PROTO_ABI_ARM "arm-abi"
+
+#if defined(__i386__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_32
+#elif defined(__x86_64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_X86_64
+#elif defined(__arm__) || defined(__aarch64__)
+# define XEN_IO_PROTO_ABI_NATIVE XEN_IO_PROTO_ABI_ARM
+#else
+# error arch fixup needed here
+#endif
+
+#endif
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
new file mode 100644
index 0000000..3c5c87d
--- /dev/null
+++ b/include/xen/interface/io/ring.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * ring.h
+ *
+ * Shared producer-consumer ring macros.
+ *
+ * Tim Deegan and Andrew Warfield November 2004.
+ */
+
+#ifndef __XEN_PUBLIC_IO_RING_H__
+#define __XEN_PUBLIC_IO_RING_H__
+
+/*
+ * When #include'ing this header, you need to provide the following
+ * declaration upfront:
+ * - standard integers types (u8, u16, etc)
+ * They are provided by stdint.h of the standard headers.
+ *
+ * In addition, if you intend to use the FLEX macros, you also need to
+ * provide the following, before invoking the FLEX macros:
+ * - size_t
+ * - memcpy
+ * - grant_ref_t
+ * These declarations are provided by string.h of the standard headers,
+ * and grant_table.h from the Xen public headers.
+ */
+
+#include <xen/interface/grant_table.h>
+
+typedef unsigned int RING_IDX;
+
+/* Round a 32-bit unsigned constant down to the nearest power of two. */
+#define __RD2(_x) (((_x) & 0x00000002) ? 0x2 : ((_x) & 0x1))
+#define __RD4(_x) (((_x) & 0x0000000c) ? __RD2((_x) >> 2) << 2 : __RD2(_x))
+#define __RD8(_x) (((_x) & 0x000000f0) ? __RD4((_x) >> 4) << 4 : __RD4(_x))
+#define __RD16(_x) (((_x) & 0x0000ff00) ? __RD8((_x) >> 8) << 8 : __RD8(_x))
+#define __RD32(_x) (((_x) & 0xffff0000) ? __RD16((_x) >> 16) << 16 : __RD16(_x))
+
+/*
+ * Calculate size of a shared ring, given the total available space for the
+ * ring and indexes (_sz), and the name tag of the request/response structure.
+ * A ring contains as many entries as will fit, rounded down to the nearest
+ * power of two (so we can mask with (size-1) to loop around).
+ */
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+
+/*
+ * Macros to make the correct C datatypes for a new kind of ring.
+ *
+ * To make a new ring datatype, you need to have two message structures,
+ * let's say request_t, and response_t already defined.
+ *
+ * In a header where you want the ring datatype declared, you then do:
+ *
+ * DEFINE_RING_TYPES(mytag, request_t, response_t);
+ *
+ * These expand out to give you a set of types, as you can see below.
+ * The most important of these are:
+ *
+ * mytag_sring_t - The shared ring.
+ * mytag_front_ring_t - The 'front' half of the ring.
+ * mytag_back_ring_t - The 'back' half of the ring.
+ *
+ * To initialize a ring in your code you need to know the location and size
+ * of the shared memory area (PAGE_SIZE, for instance). To initialise
+ * the front half:
+ *
+ * mytag_front_ring_t front_ring;
+ * SHARED_RING_INIT((mytag_sring_t *)shared_page);
+ * FRONT_RING_INIT(&front_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
+ *
+ * Initializing the back follows similarly (note that only the front
+ * initializes the shared ring):
+ *
+ * mytag_back_ring_t back_ring;
+ * BACK_RING_INIT(&back_ring, (mytag_sring_t *)shared_page, PAGE_SIZE);
+ */
+
+#define DEFINE_RING_TYPES(__name, __req_t, __rsp_t) \
+ \
+/* Shared ring entry */ \
+union __name##_sring_entry { \
+ __req_t req; \
+ __rsp_t rsp; \
+}; \
+ \
+/* Shared ring page */ \
+struct __name##_sring { \
+ RING_IDX req_prod, req_event; \
+ RING_IDX rsp_prod, rsp_event; \
+ union { \
+ struct { \
+ u8 smartpoll_active; \
+ } netif; \
+ struct { \
+ u8 msg; \
+ } tapif_user; \
+ u8 pvt_pad[4]; \
+ } pvt; \
+ u8 __pad[44]; \
+ union __name##_sring_entry ring[1]; /* variable-length */ \
+}; \
+ \
+/* "Front" end's private variables */ \
+struct __name##_front_ring { \
+ RING_IDX req_prod_pvt; \
+ RING_IDX rsp_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
+/* "Back" end's private variables */ \
+struct __name##_back_ring { \
+ RING_IDX rsp_prod_pvt; \
+ RING_IDX req_cons; \
+ unsigned int nr_ents; \
+ struct __name##_sring *sring; \
+}; \
+ \
+/* Syntactic sugar */ \
+typedef struct __name##_sring __name##_sring_t; \
+typedef struct __name##_front_ring __name##_front_ring_t; \
+typedef struct __name##_back_ring __name##_back_ring_t
+
+/*
+ * Macros for manipulating rings.
+ *
+ * FRONT_RING_whatever works on the "front end" of a ring: here
+ * requests are pushed on to the ring and responses taken off it.
+ *
+ * BACK_RING_whatever works on the "back end" of a ring: here
+ * requests are taken off the ring and responses put on.
+ *
+ * N.B. these macros do NO INTERLOCKS OR FLOW CONTROL.
+ * This is OK in 1-for-1 request-response situations where the
+ * requestor (front end) never has more than RING_SIZE()-1
+ * outstanding requests.
+ */
+
+/* Initialising empty rings */
+#define SHARED_RING_INIT(_s) do { \
+ (_s)->req_prod = (_s)->rsp_prod = 0; \
+ (_s)->req_event = (_s)->rsp_event = 1; \
+ (void)memset((_s)->pvt.pvt_pad, 0, sizeof((_s)->pvt.pvt_pad)); \
+ (void)memset((_s)->__pad, 0, sizeof((_s)->__pad)); \
+} while (0)
+
+#define FRONT_RING_INIT(_r, _s, __size) do { \
+ (_r)->req_prod_pvt = 0; \
+ (_r)->rsp_cons = 0; \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
+} while (0)
+
+#define BACK_RING_INIT(_r, _s, __size) do { \
+ (_r)->rsp_prod_pvt = 0; \
+ (_r)->req_cons = 0; \
+ (_r)->nr_ents = __RING_SIZE(_s, __size); \
+ (_r)->sring = (_s); \
+} while (0)
+
+/* How big is this ring? */
+#define RING_SIZE(_r) \
+ ((_r)->nr_ents)
+
+/* Number of free requests (for use on front side only). */
+#define RING_FREE_REQUESTS(_r) \
+ (RING_SIZE(_r) - ((_r)->req_prod_pvt - (_r)->rsp_cons))
+
+/* Test if there is an empty slot available on the front ring.
+ * (This is only meaningful from the front. )
+ */
+#define RING_FULL(_r) \
+ (RING_FREE_REQUESTS(_r) == 0)
+
+/* Test if there are outstanding messages to be processed on a ring. */
+#define RING_HAS_UNCONSUMED_RESPONSES(_r) \
+ ((_r)->sring->rsp_prod - (_r)->rsp_cons)
+
+#ifdef __GNUC__
+#define RING_HAS_UNCONSUMED_REQUESTS(_r) ({ \
+ unsigned int req = (_r)->sring->req_prod - (_r)->req_cons; \
+ unsigned int rsp = RING_SIZE(_r) - \
+ ((_r)->req_cons - (_r)->rsp_prod_pvt); \
+ req < rsp ? req : rsp; \
+})
+#else
+/* Same as above, but without the nice GCC ({ ... }) syntax. */
+#define RING_HAS_UNCONSUMED_REQUESTS(_r) \
+ ((((_r)->sring->req_prod - (_r)->req_cons) < \
+ (RING_SIZE(_r) - ((_r)->req_cons - (_r)->rsp_prod_pvt))) ? \
+ ((_r)->sring->req_prod - (_r)->req_cons) : \
+ (RING_SIZE(_r) - ((_r)->req_cons - (_r)->rsp_prod_pvt)))
+#endif
+
+/* Direct access to individual ring elements, by index. */
+#define RING_GET_REQUEST(_r, _idx) \
+ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].req))
+
+/*
+ * Get a local copy of a request.
+ *
+ * Use this in preference to RING_GET_REQUEST() so all processing is
+ * done on a local copy that cannot be modified by the other end.
+ *
+ * Note that https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145 may cause this
+ * to be ineffective where _req is a struct which consists of only bitfields.
+ */
+#define RING_COPY_REQUEST(_r, _idx, _req) do { \
+ /* Use volatile to force the copy into _req. */ \
+ *(_req) = *(volatile typeof(_req))RING_GET_REQUEST(_r, _idx); \
+} while (0)
+
+#define RING_GET_RESPONSE(_r, _idx) \
+ (&((_r)->sring->ring[((_idx) & (RING_SIZE(_r) - 1))].rsp))
+
+/* Loop termination condition: Would the specified index overflow the ring? */
+#define RING_REQUEST_CONS_OVERFLOW(_r, _cons) \
+ (((_cons) - (_r)->rsp_prod_pvt) >= RING_SIZE(_r))
+
+/* Ill-behaved frontend determination: Can there be this many requests? */
+#define RING_REQUEST_PROD_OVERFLOW(_r, _prod) \
+ (((_prod) - (_r)->rsp_prod_pvt) > RING_SIZE(_r))
+
+#define RING_PUSH_REQUESTS(_r) do { \
+ xen_wmb(); /* back sees requests /before/ updated producer index */ \
+ (_r)->sring->req_prod = (_r)->req_prod_pvt; \
+} while (0)
+
+#define RING_PUSH_RESPONSES(_r) do { \
+ xen_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = (_r)->rsp_prod_pvt; \
+} while (0)
+
+/*
+ * Notification hold-off (req_event and rsp_event):
+ *
+ * When queueing requests or responses on a shared ring, it may not always be
+ * necessary to notify the remote end. For example, if requests are in flight
+ * in a backend, the front may be able to queue further requests without
+ * notifying the back (if the back checks for new requests when it queues
+ * responses).
+ *
+ * When enqueuing requests or responses:
+ *
+ * Use RING_PUSH_{REQUESTS,RESPONSES}_AND_CHECK_NOTIFY(). The second argument
+ * is a boolean return value. True indicates that the receiver requires an
+ * asynchronous notification.
+ *
+ * After dequeuing requests or responses (before sleeping the connection):
+ *
+ * Use RING_FINAL_CHECK_FOR_REQUESTS() or RING_FINAL_CHECK_FOR_RESPONSES().
+ * The second argument is a boolean return value. True indicates that there
+ * are pending messages on the ring (i.e., the connection should not be put
+ * to sleep).
+ *
+ * These macros will set the req_event/rsp_event field to trigger a
+ * notification on the very next message that is enqueued. If you want to
+ * create batches of work (i.e., only receive a notification after several
+ * messages have been enqueued) then you will need to create a customised
+ * version of the FINAL_CHECK macro in your own code, which sets the event
+ * field appropriately.
+ */
+
+#define RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->req_prod; \
+ RING_IDX __new = (_r)->req_prod_pvt; \
+ xen_wmb(); /* back sees requests /before/ updated producer index */ \
+ (_r)->sring->req_prod = __new; \
+ xen_mb(); /* back sees new requests /before/ we check req_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->req_event) < \
+ (RING_IDX)(__new - __old)); \
+} while (0)
+
+#define RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(_r, _notify) do { \
+ RING_IDX __old = (_r)->sring->rsp_prod; \
+ RING_IDX __new = (_r)->rsp_prod_pvt; \
+ xen_wmb(); /* front sees resps /before/ updated producer index */ \
+ (_r)->sring->rsp_prod = __new; \
+ xen_mb(); /* front sees new resps /before/ we check rsp_event */ \
+ (_notify) = ((RING_IDX)(__new - (_r)->sring->rsp_event) < \
+ (RING_IDX)(__new - __old)); \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_REQUESTS(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+ if (_work_to_do) \
+ break; \
+ (_r)->sring->req_event = (_r)->req_cons + 1; \
+ xen_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_REQUESTS(_r); \
+} while (0)
+
+#define RING_FINAL_CHECK_FOR_RESPONSES(_r, _work_to_do) do { \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+ if (_work_to_do) \
+ break; \
+ (_r)->sring->rsp_event = (_r)->rsp_cons + 1; \
+ xen_mb(); \
+ (_work_to_do) = RING_HAS_UNCONSUMED_RESPONSES(_r); \
+} while (0)
+
+/*
+ * DEFINE_XEN_FLEX_RING_AND_INTF defines two monodirectional rings and
+ * functions to check if there is data on the ring, and to read and
+ * write to them.
+ *
+ * DEFINE_XEN_FLEX_RING is similar to DEFINE_XEN_FLEX_RING_AND_INTF, but
+ * does not define the indexes page. As different protocols can have
+ * extensions to the basic format, this macro allow them to define their
+ * own struct.
+ *
+ * XEN_FLEX_RING_SIZE
+ * Convenience macro to calculate the size of one of the two rings
+ * from the overall order.
+ *
+ * $NAME_mask
+ * Function to apply the size mask to an index, to reduce the index
+ * within the range [0-size].
+ *
+ * $NAME_read_packet
+ * Function to read data from the ring. The amount of data to read is
+ * specified by the "size" argument.
+ *
+ * $NAME_write_packet
+ * Function to write data to the ring. The amount of data to write is
+ * specified by the "size" argument.
+ *
+ * $NAME_get_ring_ptr
+ * Convenience function that returns a pointer to read/write to the
+ * ring at the right location.
+ *
+ * $NAME_data_intf
+ * Indexes page, shared between frontend and backend. It also
+ * contains the array of grant refs.
+ *
+ * $NAME_queued
+ * Function to calculate how many bytes are currently on the ring,
+ * ready to be read. It can also be used to calculate how much free
+ * space is currently on the ring (XEN_FLEX_RING_SIZE() -
+ * $NAME_queued()).
+ */
+
+#ifndef XEN_PAGE_SHIFT
+/* The PAGE_SIZE for ring protocols and hypercall interfaces is always
+ * 4K, regardless of the architecture, and page granularity chosen by
+ * operating systems.
+ */
+#define XEN_PAGE_SHIFT 12
+#endif
+#define XEN_FLEX_RING_SIZE(order) \
+ (1UL << ((order) + XEN_PAGE_SHIFT - 1))
+
+#define DEFINE_XEN_FLEX_RING(name) \
+static inline RING_IDX name##_mask(RING_IDX idx, RING_IDX ring_size) \
+{ \
+ return idx & (ring_size - 1); \
+} \
+ \
+static inline unsigned char *name##_get_ring_ptr(unsigned char *buf, \
+ RING_IDX idx, \
+ RING_IDX ring_size) \
+{ \
+ return buf + name##_mask(idx, ring_size); \
+} \
+ \
+static inline void name##_read_packet(void *opaque, \
+ const unsigned char *buf, \
+ size_t size, \
+ RING_IDX masked_prod, \
+ RING_IDX *masked_cons, \
+ RING_IDX ring_size) \
+{ \
+ if (*masked_cons < masked_prod || \
+ size <= ring_size - *masked_cons) { \
+ memcpy(opaque, buf + *masked_cons, size); \
+ } else { \
+ memcpy(opaque, buf + *masked_cons, ring_size - *masked_cons); \
+ memcpy((unsigned char *)opaque + ring_size - *masked_cons, buf, \
+ size - (ring_size - *masked_cons)); \
+ } \
+ *masked_cons = name##_mask(*masked_cons + size, ring_size); \
+} \
+ \
+static inline void name##_write_packet(unsigned char *buf, \
+ const void *opaque, \
+ size_t size, \
+ RING_IDX *masked_prod, \
+ RING_IDX masked_cons, \
+ RING_IDX ring_size) \
+{ \
+ if (*masked_prod < masked_cons || \
+ size <= ring_size - *masked_prod) { \
+ memcpy(buf + *masked_prod, opaque, size); \
+ } else { \
+ memcpy(buf + *masked_prod, opaque, ring_size - *masked_prod); \
+ memcpy(buf, (unsigned char *)opaque + (ring_size - *masked_prod), \
+ size - (ring_size - *masked_prod)); \
+ } \
+ *masked_prod = name##_mask(*masked_prod + size, ring_size); \
+} \
+ \
+static inline RING_IDX name##_queued(RING_IDX prod, \
+ RING_IDX cons, \
+ RING_IDX ring_size) \
+{ \
+ RING_IDX size; \
+ \
+ if (prod == cons) \
+ return 0; \
+ \
+ prod = name##_mask(prod, ring_size); \
+ cons = name##_mask(cons, ring_size); \
+ \
+ if (prod == cons) \
+ return ring_size; \
+ \
+ if (prod > cons) \
+ size = prod - cons; \
+ else \
+ size = ring_size - (cons - prod); \
+ return size; \
+} \
+ \
+struct name##_data { \
+ unsigned char *in; /* half of the allocation */ \
+ unsigned char *out; /* half of the allocation */ \
+}
+
+#define DEFINE_XEN_FLEX_RING_AND_INTF(name) \
+struct name##_data_intf { \
+ RING_IDX in_cons, in_prod; \
+ \
+ u8 pad1[56]; \
+ \
+ RING_IDX out_cons, out_prod; \
+ \
+ u8 pad2[56]; \
+ \
+ RING_IDX ring_order; \
+ grant_ref_t ref[]; \
+}; \
+DEFINE_XEN_FLEX_RING(name)
+
+#endif /* __XEN_PUBLIC_IO_RING_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/io/xenbus.h b/include/xen/interface/io/xenbus.h
new file mode 100644
index 0000000..946d46d
--- /dev/null
+++ b/include/xen/interface/io/xenbus.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * xenbus.h
+ *
+ * Xenbus protocol details.
+ *
+ * Copyright (C) 2005 XenSource Ltd.
+ */
+
+#ifndef _XEN_PUBLIC_IO_XENBUS_H
+#define _XEN_PUBLIC_IO_XENBUS_H
+
+/*
+ * The state of either end of the Xenbus, i.e. the current communication
+ * status of initialisation across the bus. States here imply nothing about
+ * the state of the connection between the driver and the kernel's device
+ * layers.
+ */
+enum xenbus_state {
+ XenbusStateUnknown = 0,
+
+ XenbusStateInitialising = 1,
+
+ /*
+ * InitWait: Finished early initialisation but waiting for information
+ * from the peer or hotplug scripts.
+ */
+ XenbusStateInitWait = 2,
+
+ /*
+ * Initialised: Waiting for a connection from the peer.
+ */
+ XenbusStateInitialised = 3,
+
+ XenbusStateConnected = 4,
+
+ /*
+ * Closing: The device is being closed due to an error or an unplug event.
+ */
+ XenbusStateClosing = 5,
+
+ XenbusStateClosed = 6,
+
+ /*
+ * Reconfiguring: The device is being reconfigured.
+ */
+ XenbusStateReconfiguring = 7,
+
+ XenbusStateReconfigured = 8
+};
+
+typedef enum xenbus_state XenbusState;
+
+#endif /* _XEN_PUBLIC_IO_XENBUS_H */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h
new file mode 100644
index 0000000..f20d9c5
--- /dev/null
+++ b/include/xen/interface/io/xs_wire.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * Details of the "wire" protocol between Xen Store Daemon and client
+ * library or guest kernel.
+ *
+ * Copyright (C) 2005 Rusty Russell IBM Corporation
+ */
+
+#ifndef _XS_WIRE_H
+#define _XS_WIRE_H
+
+enum xsd_sockmsg_type {
+ XS_CONTROL,
+#define XS_DEBUG XS_CONTROL
+ XS_DIRECTORY,
+ XS_READ,
+ XS_GET_PERMS,
+ XS_WATCH,
+ XS_UNWATCH,
+ XS_TRANSACTION_START,
+ XS_TRANSACTION_END,
+ XS_INTRODUCE,
+ XS_RELEASE,
+ XS_GET_DOMAIN_PATH,
+ XS_WRITE,
+ XS_MKDIR,
+ XS_RM,
+ XS_SET_PERMS,
+ XS_WATCH_EVENT,
+ XS_ERROR,
+ XS_IS_DOMAIN_INTRODUCED,
+ XS_RESUME,
+ XS_SET_TARGET,
+ /* XS_RESTRICT has been removed */
+ XS_RESET_WATCHES = XS_SET_TARGET + 2,
+ XS_DIRECTORY_PART,
+
+ XS_TYPE_COUNT, /* Number of valid types. */
+
+ XS_INVALID = 0xffff /* Guaranteed to remain an invalid type */
+};
+
+#define XS_WRITE_NONE "NONE"
+#define XS_WRITE_CREATE "CREATE"
+#define XS_WRITE_CREATE_EXCL "CREATE|EXCL"
+
+/* We hand errors as strings, for portability. */
+struct xsd_errors {
+ int errnum;
+ const char *errstring;
+};
+
+#ifdef EINVAL
+#define XSD_ERROR(x) { x, #x }
+/* LINTED: static unused */
+static struct xsd_errors xsd_errors[]
+#if defined(__GNUC__)
+__attribute__((unused))
+#endif
+ = {
+ XSD_ERROR(EINVAL),
+ XSD_ERROR(EACCES),
+ XSD_ERROR(EEXIST),
+ XSD_ERROR(EISDIR),
+ XSD_ERROR(ENOENT),
+ XSD_ERROR(ENOMEM),
+ XSD_ERROR(ENOSPC),
+ XSD_ERROR(EIO),
+ XSD_ERROR(ENOTEMPTY),
+ XSD_ERROR(ENOSYS),
+ XSD_ERROR(EROFS),
+ XSD_ERROR(EBUSY),
+ XSD_ERROR(EAGAIN),
+ XSD_ERROR(EISCONN),
+ XSD_ERROR(E2BIG)
+};
+#endif
+
+struct xsd_sockmsg {
+ u32 type; /* XS_??? */
+ u32 req_id;/* Request identifier, echoed in daemon's response. */
+ u32 tx_id; /* Transaction id (0 if not related to a transaction). */
+ u32 len; /* Length of data following this. */
+
+ /* Generally followed by nul-terminated string(s). */
+};
+
+enum xs_watch_type {
+ XS_WATCH_PATH = 0,
+ XS_WATCH_TOKEN
+};
+
+/*
+ * `incontents 150 xenstore_struct XenStore wire protocol.
+ *
+ * Inter-domain shared memory communications.
+ */
+#define XENSTORE_RING_SIZE 1024
+typedef u32 XENSTORE_RING_IDX;
+#define MASK_XENSTORE_IDX(idx) ((idx) & (XENSTORE_RING_SIZE - 1))
+struct xenstore_domain_interface {
+ char req[XENSTORE_RING_SIZE]; /* Requests to xenstore daemon. */
+ char rsp[XENSTORE_RING_SIZE]; /* Replies and async watch events. */
+ XENSTORE_RING_IDX req_cons, req_prod;
+ XENSTORE_RING_IDX rsp_cons, rsp_prod;
+ u32 server_features; /* Bitmap of features supported by the server */
+ u32 connection;
+};
+
+/* Violating this is very bad. See docs/misc/xenstore.txt. */
+#define XENSTORE_PAYLOAD_MAX 4096
+
+/* Violating these just gets you an error back */
+#define XENSTORE_ABS_PATH_MAX 3072
+#define XENSTORE_REL_PATH_MAX 2048
+
+/* The ability to reconnect a ring */
+#define XENSTORE_SERVER_FEATURE_RECONNECTION 1
+
+/* Valid values for the connection field */
+#define XENSTORE_CONNECTED 0 /* the steady-state */
+#define XENSTORE_RECONNECT 1 /* guest has initiated a reconnect */
+
+#endif /* _XS_WIRE_H */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 8
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
new file mode 100644
index 0000000..59a95db
--- /dev/null
+++ b/include/xen/interface/memory.h
@@ -0,0 +1,332 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * memory.h
+ *
+ * Memory reservation and information.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_MEMORY_H__
+#define __XEN_PUBLIC_MEMORY_H__
+
+/*
+ * Increase or decrease the specified domain's memory reservation. Returns a
+ * -ve errcode on failure, or the # extents successfully allocated or freed.
+ * arg == addr of struct xen_memory_reservation.
+ */
+#define XENMEM_increase_reservation 0
+#define XENMEM_decrease_reservation 1
+#define XENMEM_populate_physmap 6
+struct xen_memory_reservation {
+ /*
+ * XENMEM_increase_reservation:
+ * OUT: MFN (*not* GMFN) bases of extents that were allocated
+ * XENMEM_decrease_reservation:
+ * IN: GMFN bases of extents to free
+ * XENMEM_populate_physmap:
+ * IN: GPFN bases of extents to populate with memory
+ * OUT: GMFN bases of extents that were allocated
+ * (NB. This command also updates the mach_to_phys translation table)
+ */
+ GUEST_HANDLE(xen_pfn_t)extent_start;
+
+ /* Number of extents, and size/alignment of each (2^extent_order pages). */
+ xen_ulong_t nr_extents;
+ unsigned int extent_order;
+
+ /*
+ * Maximum # bits addressable by the user of the allocated region (e.g.,
+ * I/O devices often have a 32-bit limitation even in 64-bit systems). If
+ * zero then the user has no addressing restriction.
+ * This field is not used by XENMEM_decrease_reservation.
+ */
+ unsigned int address_bits;
+
+ /*
+ * Domain whose reservation is being changed.
+ * Unprivileged domains can specify only DOMID_SELF.
+ */
+ domid_t domid;
+
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation);
+
+/*
+ * An atomic exchange of memory pages. If return code is zero then
+ * @out.extent_list provides GMFNs of the newly-allocated memory.
+ * Returns zero on complete success, otherwise a negative error code.
+ * On complete success then always @nr_exchanged == @in.nr_extents.
+ * On partial success @nr_exchanged indicates how much work was done.
+ */
+#define XENMEM_exchange 11
+struct xen_memory_exchange {
+ /*
+ * [IN] Details of memory extents to be exchanged (GMFN bases).
+ * Note that @in.address_bits is ignored and unused.
+ */
+ struct xen_memory_reservation in;
+
+ /*
+ * [IN/OUT] Details of new memory extents.
+ * We require that:
+ * 1. @in.domid == @out.domid
+ * 2. @in.nr_extents << @in.extent_order ==
+ * @out.nr_extents << @out.extent_order
+ * 3. @in.extent_start and @out.extent_start lists must not overlap
+ * 4. @out.extent_start lists GPFN bases to be populated
+ * 5. @out.extent_start is overwritten with allocated GMFN bases
+ */
+ struct xen_memory_reservation out;
+
+ /*
+ * [OUT] Number of input extents that were successfully exchanged:
+ * 1. The first @nr_exchanged input extents were successfully
+ * deallocated.
+ * 2. The corresponding first entries in the output extent list correctly
+ * indicate the GMFNs that were successfully exchanged.
+ * 3. All other input and output extents are untouched.
+ * 4. If not all input exents are exchanged then the return code of this
+ * command will be non-zero.
+ * 5. THIS FIELD MUST BE INITIALISED TO ZERO BY THE CALLER!
+ */
+ xen_ulong_t nr_exchanged;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_exchange);
+/*
+ * Returns the maximum machine frame number of mapped RAM in this system.
+ * This command always succeeds (it never returns an error code).
+ * arg == NULL.
+ */
+#define XENMEM_maximum_ram_page 2
+
+/*
+ * Returns the current or maximum memory reservation, in pages, of the
+ * specified domain (may be DOMID_SELF). Returns -ve errcode on failure.
+ * arg == addr of domid_t.
+ */
+#define XENMEM_current_reservation 3
+#define XENMEM_maximum_reservation 4
+
+/*
+ * Returns a list of MFN bases of 2MB extents comprising the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table do not implement
+ * this command.
+ * arg == addr of xen_machphys_mfn_list_t.
+ */
+#define XENMEM_machphys_mfn_list 5
+struct xen_machphys_mfn_list {
+ /*
+ * Size of the 'extent_start' array. Fewer entries will be filled if the
+ * machphys table is smaller than max_extents * 2MB.
+ */
+ unsigned int max_extents;
+
+ /*
+ * Pointer to buffer to fill with list of extent starts. If there are
+ * any large discontiguities in the machine address space, 2MB gaps in
+ * the machphys table will be represented by an MFN base of zero.
+ */
+ GUEST_HANDLE(xen_pfn_t)extent_start;
+
+ /*
+ * Number of extents written to the above array. This will be smaller
+ * than 'max_extents' if the machphys table is smaller than max_e * 2MB.
+ */
+ unsigned int nr_extents;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
+
+/*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping 12
+struct xen_machphys_mapping {
+ xen_ulong_t v_start, v_end; /* Start and end virtual addresses. */
+ xen_ulong_t max_mfn; /* Maximum MFN that can be looked up. */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
+#define XENMAPSPACE_shared_info 0 /* shared info page */
+#define XENMAPSPACE_grant_table 1 /* grant table page */
+#define XENMAPSPACE_gmfn 2 /* GMFN */
+#define XENMAPSPACE_gmfn_range 3 /* GMFN range, XENMEM_add_to_physmap only. */
+#define XENMAPSPACE_gmfn_foreign 4 /* GMFN from another dom,
+ * XENMEM_add_to_physmap_range only.
+ */
+#define XENMAPSPACE_dev_mmio 5 /* device mmio region */
+
+/*
+ * Sets the GPFN at which a particular page appears in the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_add_to_physmap_t.
+ */
+#define XENMEM_add_to_physmap 7
+struct xen_add_to_physmap {
+ /* Which domain to change the mapping for. */
+ domid_t domid;
+
+ /* Number of pages to go through for gmfn_range */
+ u16 size;
+
+ /* Source mapping space. */
+ unsigned int space;
+
+ /* Index into source mapping space. */
+ xen_ulong_t idx;
+
+ /* GPFN where the source mapping page should appear. */
+ xen_pfn_t gpfn;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
+
+/*** REMOVED ***/
+/*#define XENMEM_translate_gpfn_list 8*/
+
+#define XENMEM_add_to_physmap_range 23
+struct xen_add_to_physmap_range {
+ /* IN */
+ /* Which domain to change the mapping for. */
+ domid_t domid;
+ u16 space; /* => enum phys_map_space */
+
+ /* Number of pages to go through */
+ u16 size;
+ domid_t foreign_domid; /* IFF gmfn_foreign */
+
+ /* Indexes into space being mapped. */
+ GUEST_HANDLE(xen_ulong_t)idxs;
+
+ /* GPFN in domid where the source mapping page should appear. */
+ GUEST_HANDLE(xen_pfn_t)gpfns;
+
+ /* OUT */
+
+ /* Per index error code. */
+ GUEST_HANDLE(int)errs;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap_range);
+
+/*
+ * Returns the pseudo-physical memory map as it was when the domain
+ * was started (specified by XENMEM_set_memory_map).
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_memory_map 9
+struct xen_memory_map {
+ /*
+ * On call the number of entries which can be stored in buffer. On
+ * return the number of entries which have been stored in
+ * buffer.
+ */
+ unsigned int nr_entries;
+
+ /*
+ * Entries in the buffer are in the same format as returned by the
+ * BIOS INT 0x15 EAX=0xE820 call.
+ */
+ GUEST_HANDLE(void)buffer;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_memory_map);
+
+/*
+ * Returns the real physical memory map. Passes the same structure as
+ * XENMEM_memory_map.
+ * arg == addr of struct xen_memory_map.
+ */
+#define XENMEM_machine_memory_map 10
+
+/*
+ * Unmaps the page appearing at a particular GPFN from the specified guest's
+ * pseudophysical address space.
+ * arg == addr of xen_remove_from_physmap_t.
+ */
+#define XENMEM_remove_from_physmap 15
+struct xen_remove_from_physmap {
+ /* Which domain to change the mapping for. */
+ domid_t domid;
+
+ /* GPFN of the current mapping of the page. */
+ xen_pfn_t gpfn;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_remove_from_physmap);
+
+/*
+ * Get the pages for a particular guest resource, so that they can be
+ * mapped directly by a tools domain.
+ */
+#define XENMEM_acquire_resource 28
+struct xen_mem_acquire_resource {
+ /* IN - The domain whose resource is to be mapped */
+ domid_t domid;
+ /* IN - the type of resource */
+ u16 type;
+
+#define XENMEM_resource_ioreq_server 0
+#define XENMEM_resource_grant_table 1
+
+ /*
+ * IN - a type-specific resource identifier, which must be zero
+ * unless stated otherwise.
+ *
+ * type == XENMEM_resource_ioreq_server -> id == ioreq server id
+ * type == XENMEM_resource_grant_table -> id defined below
+ */
+ u32 id;
+
+#define XENMEM_resource_grant_table_id_shared 0
+#define XENMEM_resource_grant_table_id_status 1
+
+ /* IN/OUT - As an IN parameter number of frames of the resource
+ * to be mapped. However, if the specified value is 0 and
+ * frame_list is NULL then this field will be set to the
+ * maximum value supported by the implementation on return.
+ */
+ u32 nr_frames;
+ /*
+ * OUT - Must be zero on entry. On return this may contain a bitwise
+ * OR of the following values.
+ */
+ u32 flags;
+
+ /* The resource pages have been assigned to the calling domain */
+#define _XENMEM_rsrc_acq_caller_owned 0
+#define XENMEM_rsrc_acq_caller_owned (1u << _XENMEM_rsrc_acq_caller_owned)
+
+ /*
+ * IN - the index of the initial frame to be mapped. This parameter
+ * is ignored if nr_frames is 0.
+ */
+ u64 frame;
+
+#define XENMEM_resource_ioreq_server_frame_bufioreq 0
+#define XENMEM_resource_ioreq_server_frame_ioreq(n) (1 + (n))
+
+ /*
+ * IN/OUT - If the tools domain is PV then, upon return, frame_list
+ * will be populated with the MFNs of the resource.
+ * If the tools domain is HVM then it is expected that, on
+ * entry, frame_list will be populated with a list of GFNs
+ * that will be mapped to the MFNs of the resource.
+ * If -EIO is returned then the frame_list has only been
+ * partially mapped and it is up to the caller to unmap all
+ * the GFNs.
+ * This parameter may be NULL if nr_frames is 0.
+ */
+ GUEST_HANDLE(xen_pfn_t)frame_list;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(xen_mem_acquire_resource);
+
+#endif /* __XEN_PUBLIC_MEMORY_H__ */
diff --git a/include/xen/interface/sched.h b/include/xen/interface/sched.h
new file mode 100644
index 0000000..387589b
--- /dev/null
+++ b/include/xen/interface/sched.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * sched.h
+ *
+ * Scheduler state interactions
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_SCHED_H__
+#define __XEN_PUBLIC_SCHED_H__
+
+#include <xen/interface/event_channel.h>
+
+/*
+ * Guest Scheduler Operations
+ *
+ * The SCHEDOP interface provides mechanisms for a guest to interact
+ * with the scheduler, including yield, blocking and shutting itself
+ * down.
+ */
+
+/*
+ * The prototype for this hypercall is:
+ * long HYPERVISOR_sched_op(enum sched_op cmd, void *arg, ...)
+ *
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == Operation-specific extra argument(s), as described below.
+ * ... == Additional Operation-specific extra arguments, described below.
+ *
+ * Versions of Xen prior to 3.0.2 provided only the following legacy version
+ * of this hypercall, supporting only the commands yield, block and shutdown:
+ * long sched_op(int cmd, unsigned long arg)
+ * @cmd == SCHEDOP_??? (scheduler operation).
+ * @arg == 0 (SCHEDOP_yield and SCHEDOP_block)
+ * == SHUTDOWN_* code (SCHEDOP_shutdown)
+ *
+ * This legacy version is available to new guests as:
+ * long HYPERVISOR_sched_op_compat(enum sched_op cmd, unsigned long arg)
+ */
+
+/*
+ * Voluntarily yield the CPU.
+ * @arg == NULL.
+ */
+#define SCHEDOP_yield 0
+
+/*
+ * Block execution of this VCPU until an event is received for processing.
+ * If called with event upcalls masked, this operation will atomically
+ * reenable event delivery and check for pending events before blocking the
+ * VCPU. This avoids a "wakeup waiting" race.
+ * @arg == NULL.
+ */
+#define SCHEDOP_block 1
+
+/*
+ * Halt execution of this domain (all VCPUs) and notify the system controller.
+ * @arg == pointer to sched_shutdown structure.
+ *
+ * If the sched_shutdown_t reason is SHUTDOWN_suspend then
+ * x86 PV guests must also set RDX (EDX for 32-bit guests) to the MFN
+ * of the guest's start info page. RDX/EDX is the third hypercall
+ * argument.
+ *
+ * In addition, which reason is SHUTDOWN_suspend this hypercall
+ * returns 1 if suspend was cancelled or the domain was merely
+ * checkpointed, and 0 if it is resuming in a new domain.
+ */
+#define SCHEDOP_shutdown 2
+
+/*
+ * Poll a set of event-channel ports. Return when one or more are pending. An
+ * optional timeout may be specified.
+ * @arg == pointer to sched_poll structure.
+ */
+#define SCHEDOP_poll 3
+
+/*
+ * Declare a shutdown for another domain. The main use of this function is
+ * in interpreting shutdown requests and reasons for fully-virtualized
+ * domains. A para-virtualized domain may use SCHEDOP_shutdown directly.
+ * @arg == pointer to sched_remote_shutdown structure.
+ */
+#define SCHEDOP_remote_shutdown 4
+
+/*
+ * Latch a shutdown code, so that when the domain later shuts down it
+ * reports this code to the control tools.
+ * @arg == sched_shutdown, as for SCHEDOP_shutdown.
+ */
+#define SCHEDOP_shutdown_code 5
+
+/*
+ * Setup, poke and destroy a domain watchdog timer.
+ * @arg == pointer to sched_watchdog structure.
+ * With id == 0, setup a domain watchdog timer to cause domain shutdown
+ * after timeout, returns watchdog id.
+ * With id != 0 and timeout == 0, destroy domain watchdog timer.
+ * With id != 0 and timeout != 0, poke watchdog timer and set new timeout.
+ */
+#define SCHEDOP_watchdog 6
+
+/*
+ * Override the current vcpu affinity by pinning it to one physical cpu or
+ * undo this override restoring the previous affinity.
+ * @arg == pointer to sched_pin_override structure.
+ *
+ * A negative pcpu value will undo a previous pin override and restore the
+ * previous cpu affinity.
+ * This call is allowed for the hardware domain only and requires the cpu
+ * to be part of the domain's cpupool.
+ */
+#define SCHEDOP_pin_override 7
+
+struct sched_shutdown {
+ unsigned int reason; /* SHUTDOWN_* => shutdown reason */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(sched_shutdown);
+
+struct sched_poll {
+ GUEST_HANDLE(evtchn_port_t)ports;
+ unsigned int nr_ports;
+ u64 timeout;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(sched_poll);
+
+struct sched_remote_shutdown {
+ domid_t domain_id; /* Remote domain ID */
+ unsigned int reason; /* SHUTDOWN_* => shutdown reason */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(sched_remote_shutdown);
+
+struct sched_watchdog {
+ u32 id; /* watchdog ID */
+ u32 timeout; /* timeout */
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(sched_watchdog);
+
+struct sched_pin_override {
+ s32 pcpu;
+};
+
+DEFINE_GUEST_HANDLE_STRUCT(sched_pin_override);
+
+/*
+ * Reason codes for SCHEDOP_shutdown. These may be interpreted by control
+ * software to determine the appropriate action. For the most part, Xen does
+ * not care about the shutdown code.
+ */
+#define SHUTDOWN_poweroff 0 /* Domain exited normally. Clean up and kill. */
+#define SHUTDOWN_reboot 1 /* Clean up, kill, and then restart. */
+#define SHUTDOWN_suspend 2 /* Clean up, save suspend info, kill. */
+#define SHUTDOWN_crash 3 /* Tell controller we've crashed. */
+#define SHUTDOWN_watchdog 4 /* Restart because watchdog time expired. */
+
+/*
+ * Domain asked to perform 'soft reset' for it. The expected behavior is to
+ * reset internal Xen state for the domain returning it to the point where it
+ * was created but leaving the domain's memory contents and vCPU contexts
+ * intact. This will allow the domain to start over and set up all Xen specific
+ * interfaces again.
+ */
+#define SHUTDOWN_soft_reset 5
+#define SHUTDOWN_MAX 5 /* Maximum valid shutdown reason. */
+
+#endif /* __XEN_PUBLIC_SCHED_H__ */
diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
new file mode 100644
index 0000000..eec8ab7
--- /dev/null
+++ b/include/xen/interface/xen.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: MIT
+ *
+ * xen.h
+ *
+ * Guest OS interface to Xen.
+ *
+ * Copyright (c) 2004, K A Fraser
+ */
+
+#ifndef __XEN_PUBLIC_XEN_H__
+#define __XEN_PUBLIC_XEN_H__
+
+#include <xen/arm/interface.h>
+
+/*
+ * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS).
+ */
+
+/*
+ * x86_32: EAX = vector; EBX, ECX, EDX, ESI, EDI = args 1, 2, 3, 4, 5.
+ * EAX = return value
+ * (argument registers may be clobbered on return)
+ * x86_64: RAX = vector; RDI, RSI, RDX, R10, R8, R9 = args 1, 2, 3, 4, 5, 6.
+ * RAX = return value
+ * (argument registers not clobbered on return; RCX, R11 are)
+ */
+#define __HYPERVISOR_set_trap_table 0
+#define __HYPERVISOR_mmu_update 1
+#define __HYPERVISOR_set_gdt 2
+#define __HYPERVISOR_stack_switch 3
+#define __HYPERVISOR_set_callbacks 4
+#define __HYPERVISOR_fpu_taskswitch 5
+#define __HYPERVISOR_sched_op_compat 6
+#define __HYPERVISOR_platform_op 7
+#define __HYPERVISOR_set_debugreg 8
+#define __HYPERVISOR_get_debugreg 9
+#define __HYPERVISOR_update_descriptor 10
+#define __HYPERVISOR_memory_op 12
+#define __HYPERVISOR_multicall 13
+#define __HYPERVISOR_update_va_mapping 14
+#define __HYPERVISOR_set_timer_op 15
+#define __HYPERVISOR_event_channel_op_compat 16
+#define __HYPERVISOR_xen_version 17
+#define __HYPERVISOR_console_io 18
+#define __HYPERVISOR_physdev_op_compat 19
+#define __HYPERVISOR_grant_table_op 20
+#define __HYPERVISOR_vm_assist 21
+#define __HYPERVISOR_update_va_mapping_otherdomain 22
+#define __HYPERVISOR_iret 23 /* x86 only */
+#define __HYPERVISOR_vcpu_op 24
+#define __HYPERVISOR_set_segment_base 25 /* x86/64 only */
+#define __HYPERVISOR_mmuext_op 26
+#define __HYPERVISOR_xsm_op 27
+#define __HYPERVISOR_nmi_op 28
+#define __HYPERVISOR_sched_op 29
+#define __HYPERVISOR_callback_op 30
+#define __HYPERVISOR_xenoprof_op 31
+#define __HYPERVISOR_event_channel_op 32
+#define __HYPERVISOR_physdev_op 33
+#define __HYPERVISOR_hvm_op 34
+#define __HYPERVISOR_sysctl 35
+#define __HYPERVISOR_domctl 36
+#define __HYPERVISOR_kexec_op 37
+#define __HYPERVISOR_tmem_op 38
+#define __HYPERVISOR_xc_reserved_op 39 /* reserved for XenClient */
+#define __HYPERVISOR_xenpmu_op 40
+#define __HYPERVISOR_dm_op 41
+
+/* Architecture-specific hypercall definitions. */
+#define __HYPERVISOR_arch_0 48
+#define __HYPERVISOR_arch_1 49
+#define __HYPERVISOR_arch_2 50
+#define __HYPERVISOR_arch_3 51
+#define __HYPERVISOR_arch_4 52
+#define __HYPERVISOR_arch_5 53
+#define __HYPERVISOR_arch_6 54
+#define __HYPERVISOR_arch_7 55
+
+#ifndef __ASSEMBLY__
+
+typedef u16 domid_t;
+
+/* Domain ids >= DOMID_FIRST_RESERVED cannot be used for ordinary domains. */
+#define DOMID_FIRST_RESERVED (0x7FF0U)
+
+/* DOMID_SELF is used in certain contexts to refer to oneself. */
+#define DOMID_SELF (0x7FF0U)
+
+/*
+ * DOMID_IO is used to restrict page-table updates to mapping I/O memory.
+ * Although no Foreign Domain need be specified to map I/O pages, DOMID_IO
+ * is useful to ensure that no mappings to the OS's own heap are accidentally
+ * installed. (e.g., in Linux this could cause havoc as reference counts
+ * aren't adjusted on the I/O-mapping code path).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, but in that context can
+ * be specified by any calling domain.
+ */
+#define DOMID_IO (0x7FF1U)
+
+/*
+ * DOMID_XEN is used to allow privileged domains to map restricted parts of
+ * Xen's heap space (e.g., the machine_to_phys table).
+ * This only makes sense in MMUEXT_SET_FOREIGNDOM, and is only permitted if
+ * the caller is privileged.
+ */
+#define DOMID_XEN (0x7FF2U)
+
+/* DOMID_COW is used as the owner of sharable pages */
+#define DOMID_COW (0x7FF3U)
+
+/* DOMID_INVALID is used to identify pages with unknown owner. */
+#define DOMID_INVALID (0x7FF4U)
+
+/* Idle domain. */
+#define DOMID_IDLE (0x7FFFU)
+
+struct vcpu_info {
+ /*
+ * 'evtchn_upcall_pending' is written non-zero by Xen to indicate
+ * a pending notification for a particular VCPU. It is then cleared
+ * by the guest OS /before/ checking for pending work, thus avoiding
+ * a set-and-check race. Note that the mask is only accessed by Xen
+ * on the CPU that is currently hosting the VCPU. This means that the
+ * pending and mask flags can be updated by the guest without special
+ * synchronisation (i.e., no need for the x86 LOCK prefix).
+ * This may seem suboptimal because if the pending flag is set by
+ * a different CPU then an IPI may be scheduled even when the mask
+ * is set. However, note:
+ * 1. The task of 'interrupt holdoff' is covered by the per-event-
+ * channel mask bits. A 'noisy' event that is continually being
+ * triggered can be masked at source at this very precise
+ * granularity.
+ * 2. The main purpose of the per-VCPU mask is therefore to restrict
+ * reentrant execution: whether for concurrency control, or to
+ * prevent unbounded stack usage. Whatever the purpose, we expect
+ * that the mask will be asserted only for short periods at a time,
+ * and so the likelihood of a 'spurious' IPI is suitably small.
+ * The mask is read before making an event upcall to the guest: a
+ * non-zero mask therefore guarantees that the VCPU will not receive
+ * an upcall activation. The mask is cleared when the VCPU requests
+ * to block: this avoids wakeup-waiting races.
+ */
+ u8 evtchn_upcall_pending;
+ u8 evtchn_upcall_mask;
+ xen_ulong_t evtchn_pending_sel;
+ struct arch_vcpu_info arch;
+ struct pvclock_vcpu_time_info time;
+}; /* 64 bytes (x86) */
+
+/*
+ * Xen/kernel shared data -- pointer provided in start_info.
+ * NB. We expect that this struct is smaller than a page.
+ */
+struct shared_info {
+ struct vcpu_info vcpu_info[MAX_VIRT_CPUS];
+
+ /*
+ * A domain can create "event channels" on which it can send and receive
+ * asynchronous event notifications. There are three classes of event that
+ * are delivered by this mechanism:
+ * 1. Bi-directional inter- and intra-domain connections. Domains must
+ * arrange out-of-band to set up a connection (usually by allocating
+ * an unbound 'listener' port and avertising that via a storage service
+ * such as xenstore).
+ * 2. Physical interrupts. A domain with suitable hardware-access
+ * privileges can bind an event-channel port to a physical interrupt
+ * source.
+ * 3. Virtual interrupts ('events'). A domain can bind an event-channel
+ * port to a virtual interrupt source, such as the virtual-timer
+ * device or the emergency console.
+ *
+ * Event channels are addressed by a "port index". Each channel is
+ * associated with two bits of information:
+ * 1. PENDING -- notifies the domain that there is a pending notification
+ * to be processed. This bit is cleared by the guest.
+ * 2. MASK -- if this bit is clear then a 0->1 transition of PENDING
+ * will cause an asynchronous upcall to be scheduled. This bit is only
+ * updated by the guest. It is read-only within Xen. If a channel
+ * becomes pending while the channel is masked then the 'edge' is lost
+ * (i.e., when the channel is unmasked, the guest must manually handle
+ * pending notifications as no upcall will be scheduled by Xen).
+ *
+ * To expedite scanning of pending notifications, any 0->1 pending
+ * transition on an unmasked channel causes a corresponding bit in a
+ * per-vcpu selector word to be set. Each bit in the selector covers a
+ * 'C long' in the PENDING bitfield array.
+ */
+ xen_ulong_t evtchn_pending[sizeof(xen_ulong_t) * 8];
+ xen_ulong_t evtchn_mask[sizeof(xen_ulong_t) * 8];
+
+ /*
+ * Wallclock time: updated only by control software. Guests should base
+ * their gettimeofday() syscall on this wallclock-base value.
+ */
+ struct pvclock_wall_clock wc;
+
+ struct arch_shared_info arch;
+
+};
+
+#else /* __ASSEMBLY__ */
+
+/* In assembly code we cannot use C numeric constant suffixes. */
+#define mk_unsigned_long(x) x
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __XEN_PUBLIC_XEN_H__ */