diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index 6586015..1dd5d07 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -13,12 +13,13 @@
 /* Set of oscillator frequencies supported in the internal API. */
 enum clock_osc_freq {
 	/* All in MHz, so 13_0 is 13.0MHz */
-	CLOCK_OSC_FREQ_13_0,
-	CLOCK_OSC_FREQ_19_2,
-	CLOCK_OSC_FREQ_12_0,
-	CLOCK_OSC_FREQ_26_0,
+	CLOCK_OSC_FREQ_13_0 = 0,
+	CLOCK_OSC_FREQ_16_8,
+	CLOCK_OSC_FREQ_19_2 = 4,
 	CLOCK_OSC_FREQ_38_4,
+	CLOCK_OSC_FREQ_12_0 = 8,
 	CLOCK_OSC_FREQ_48_0,
+	CLOCK_OSC_FREQ_26_0 = 12,
 
 	CLOCK_OSC_FREQ_COUNT,
 };
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 77c8ad9..11bffc1 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -28,16 +28,23 @@
 static unsigned pll_rate[CLOCK_ID_COUNT];
 
 /*
- * The oscillator frequency is fixed to one of four set values. Based on this
+ * The oscillator frequency is fixed to one of seven set values. Based on this
  * the other clocks are set up appropriately.
  */
 static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
 	13000000,
+	16800000,
+	       0,
+	       0,
 	19200000,
-	12000000,
-	26000000,
 	38400000,
+	       0,
+	       0,
+	12000000,
 	48000000,
+	       0,
+	       0,
+	26000000,
 };
 
 /* return 1 if a peripheral ID is in range */
@@ -766,6 +773,7 @@
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+	case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */
 		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 456, 12, 1, 8);
 		break;
@@ -776,10 +784,13 @@
 		break;
 
 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+	case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */
 		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		break;
+
 	case CLOCK_OSC_FREQ_19_2:
+	case CLOCK_OSC_FREQ_38_4:
 	default:
 		/*
 		 * These are not supported. It is too early to print a
diff --git a/arch/arm/mach-tegra/cpu.c b/arch/arm/mach-tegra/cpu.c
index 65b15b7..59ca8ae 100644
--- a/arch/arm/mach-tegra/cpu.c
+++ b/arch/arm/mach-tegra/cpu.c
@@ -55,11 +55,18 @@
 	 */
 	{
 		{ .n = 1000, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n =  625, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n = 1000, .m = 12, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n = 1000, .m = 26, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
-		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 38.4 MHz (N/A) */
-		{ .n =    0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 48.0 MHz (N/A) */
 	},
 	/*
 	 * T25: 1.2 GHz
@@ -73,11 +80,18 @@
 	 */
 	{
 		{ .n = 923, .m = 10, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n = 750, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n = 600, .m =  6, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* N/A */
 		{ .n = 600, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
-		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 38.4 MHz (N/A) */
-		{ .n =   0, .m =  0, .p = 0, .cpcon =  0 }, /* OSC: 48.0 MHz (N/A) */
 	},
 	/*
 	 * T30: 600 MHz
@@ -91,11 +105,18 @@
 	 */
 	{
 		{ .n = 600, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
+		{ .n = 600, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 16.8 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
 		{ .n = 500, .m = 16, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
+		{ .n = 500, .m = 16, .p = 0, .cpcon = 8 }, /* OSC: 38.4 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
 		{ .n = 600, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
+		{ .n = 600, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 48.0 MHz */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
+		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* N/A */
 		{ .n = 600, .m = 26, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
-		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* OSC: 38.4 MHz (N/A) */
-		{ .n =   0, .m =  0, .p = 0, .cpcon = 0 }, /* OSC: 48.0 MHz (N/A) */
 	},
 	/*
 	 * T114: 700 MHz
@@ -108,11 +129,18 @@
 	 */
 	{
 		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 16.8 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 38.4 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 48.0 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
-		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 38.4 MHz (N/A) */
-		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 48.0 MHz (N/A) */
 	},
 
 	/*
@@ -126,11 +154,18 @@
 	 */
 	{
 		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 16.8 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 38.4 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 48.0 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
 		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
-		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 38.4 MHz (N/A) */
-		{ .n =   0, .m = 0, .p = 0 }, /* OSC: 48.0 MHz (N/A) */
 	},
 
 	/*
@@ -143,12 +178,19 @@
 	 * PLLX_BASE  m       7: 0    8
 	 */
 	{
-		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz = 702   MHz*/
-		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz = 700.8 MHz*/
-		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz = 696   MHz*/
-		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz = 702   MHz*/
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz = 702   MHz */
+		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 16.0 MHz = 702   MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz = 700.8 MHz */
 		{ .n =  36, .m = 1, .p = 1 }, /* OSC: 38.4 MHz = 691.2 MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz = 696   MHz */
 		{ .n =  58, .m = 2, .p = 1 }, /* OSC: 48.0 MHz = 696   MHz */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n =   0, .m = 0, .p = 0 }, /* (N/A) */
+		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz = 702   MHz */
 	},
 };
 
diff --git a/arch/arm/mach-tegra/tegra114/clock.c b/arch/arm/mach-tegra/tegra114/clock.c
index 703a231..143f868 100644
--- a/arch/arm/mach-tegra/tegra114/clock.c
+++ b/arch/arm/mach-tegra/tegra114/clock.c
@@ -459,8 +459,7 @@
 
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field. Note that T30/T114 support 3 new higher freqs, but we map back
- * to the old T20 freqs. Support for the higher oscillators is TBD.
+ * field. Note that T30+ supports 3 new higher freqs.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -469,12 +468,7 @@
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-
-	if (reg & 1)				/* one of the newer freqs */
-		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
-
-	return reg >> 2;	/* Map to most common (T20) freqs */
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 }
 
 /* Returns a pointer to the clock source register for a peripheral */
@@ -674,6 +668,7 @@
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+	case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
 		break;
@@ -684,10 +679,12 @@
 		break;
 
 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+	case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
 		break;
 	case CLOCK_OSC_FREQ_19_2:
+	case CLOCK_OSC_FREQ_38_4:
 	default:
 		/*
 		 * These are not supported. It is too early to print a
diff --git a/arch/arm/mach-tegra/tegra124/clock.c b/arch/arm/mach-tegra/tegra124/clock.c
index bbfe184..da38b26 100644
--- a/arch/arm/mach-tegra/tegra124/clock.c
+++ b/arch/arm/mach-tegra/tegra124/clock.c
@@ -601,8 +601,7 @@
 
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field. Note that Tegra30+ support 3 new higher freqs, but we map back
- * to the old T20 freqs. Support for the higher oscillators is TBD.
+ * field. Note that T30+ supports 3 new higher freqs.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -611,12 +610,7 @@
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-
-	if (reg & 1)				/* one of the newer freqs */
-		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
-
-	return reg >> 2;	/* Map to most common (T20) freqs */
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 }
 
 /* Returns a pointer to the clock source register for a peripheral */
@@ -854,6 +848,7 @@
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+	case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
 		break;
@@ -864,10 +859,12 @@
 		break;
 
 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+	case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
 		break;
 	case CLOCK_OSC_FREQ_19_2:
+	case CLOCK_OSC_FREQ_38_4:
 	default:
 		/*
 		 * These are not supported. It is too early to print a
diff --git a/arch/arm/mach-tegra/tegra20/clock.c b/arch/arm/mach-tegra/tegra20/clock.c
index 3b50a81..8c12743 100644
--- a/arch/arm/mach-tegra/tegra20/clock.c
+++ b/arch/arm/mach-tegra/tegra20/clock.c
@@ -399,7 +399,9 @@
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	return reg << 2;
 }
 
 /* Returns a pointer to the clock source register for a peripheral */
diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c
index 10c2478..330753f 100644
--- a/arch/arm/mach-tegra/tegra210/clock.c
+++ b/arch/arm/mach-tegra/tegra210/clock.c
@@ -672,8 +672,7 @@
 
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field. Note that Tegra30+ support 3 new higher freqs, but we map back
- * to the old T20 freqs. Support for the higher oscillators is TBD.
+ * field. Note that T30+ supports 3 new higher freqs.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -682,22 +681,7 @@
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-	/*
-	 * 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz,
-	 * 8 = 12MHz, 9 = 48MHz,  12 = 26MHz
-	 */
-	if (reg == 5) {
-		debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg);
-		/* Map it to the 5th CLOCK_OSC_ enum, i.e. 4 */
-		return 4;
-	}
-
-	/*
-	 * Map to most common (T20) freqs (except 38.4, handled above):
-	 *  13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3
-	 */
-	return reg >> 2;
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 }
 
 /* Returns a pointer to the clock source register for a peripheral */
@@ -986,6 +970,7 @@
 	 */
 	switch (clock_get_osc_freq()) {
 	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+	case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
 		break;
@@ -996,6 +981,7 @@
 		break;
 
 	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+	case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */
 		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
 		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
 		break;
diff --git a/arch/arm/mach-tegra/tegra30/clock.c b/arch/arm/mach-tegra/tegra30/clock.c
index c835cd0..449b66e 100644
--- a/arch/arm/mach-tegra/tegra30/clock.c
+++ b/arch/arm/mach-tegra/tegra30/clock.c
@@ -439,8 +439,7 @@
 
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field. Note that T30 supports 3 new higher freqs, but we map back
- * to the old T20 freqs. Support for the higher oscillators is TBD.
+ * field. Note that T30+ supports 3 new higher freqs.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -449,12 +448,7 @@
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-
-	if (reg & 1)			/* one of the newer freqs */
-		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
-
-	return reg >> 2;	/* Map to most common (T20) freqs */
+	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 }
 
 /* Returns a pointer to the clock source register for a peripheral */