| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Common clock driver for Actions Semi SoCs. |
| * |
| * Copyright (C) 2015 Actions Semi Co., Ltd. |
| * Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| */ |
| |
| #include <dm.h> |
| #include "clk_owl.h" |
| #include <asm/io.h> |
| #if defined(CONFIG_MACH_S900) |
| #include <asm/arch-owl/regs_s900.h> |
| #include <dt-bindings/clock/actions,s900-cmu.h> |
| #elif defined(CONFIG_MACH_S700) |
| #include <asm/arch-owl/regs_s700.h> |
| #include <dt-bindings/clock/actions,s700-cmu.h> |
| #endif |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| |
| #define CMU_DEVCLKEN0_SD0 BIT(22) |
| |
| void owl_clk_init(struct owl_clk_priv *priv) |
| { |
| u32 bus_clk = 0, core_pll, dev_pll; |
| |
| #if defined(CONFIG_MACH_S900) |
| /* Enable ASSIST_PLL */ |
| setbits_le32(priv->base + CMU_ASSISTPLL, BIT(0)); |
| udelay(PLL_STABILITY_WAIT_US); |
| #endif |
| |
| /* Source HOSC to DEV_CLK */ |
| clrbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK); |
| |
| /* Configure BUS_CLK */ |
| bus_clk |= (CMU_PDBGDIV_DIV | CMU_PERDIV_DIV | CMU_NOCDIV_DIV | |
| CMU_DMMCLK_SRC | CMU_APBCLK_DIV | CMU_AHBCLK_DIV | |
| CMU_NOCCLK_SRC | CMU_CORECLK_HOSC); |
| writel(bus_clk, priv->base + CMU_BUSCLK); |
| |
| udelay(PLL_STABILITY_WAIT_US); |
| |
| /* Configure CORE_PLL */ |
| core_pll = readl(priv->base + CMU_COREPLL); |
| core_pll |= (CMU_COREPLL_EN | CMU_COREPLL_HOSC_EN | CMU_COREPLL_OUT); |
| writel(core_pll, priv->base + CMU_COREPLL); |
| |
| udelay(PLL_STABILITY_WAIT_US); |
| |
| /* Configure DEV_PLL */ |
| dev_pll = readl(priv->base + CMU_DEVPLL); |
| dev_pll |= (CMU_DEVPLL_EN | CMU_DEVPLL_OUT); |
| writel(dev_pll, priv->base + CMU_DEVPLL); |
| |
| udelay(PLL_STABILITY_WAIT_US); |
| |
| /* Source CORE_PLL for CORE_CLK */ |
| clrsetbits_le32(priv->base + CMU_BUSCLK, CMU_CORECLK_MASK, |
| CMU_CORECLK_CPLL); |
| |
| /* Source DEV_PLL for DEV_CLK */ |
| setbits_le32(priv->base + CMU_DEVPLL, CMU_DEVPLL_CLK); |
| |
| udelay(PLL_STABILITY_WAIT_US); |
| } |
| |
| int owl_clk_enable(struct clk *clk) |
| { |
| struct owl_clk_priv *priv = dev_get_priv(clk->dev); |
| enum owl_soc model = dev_get_driver_data(clk->dev); |
| |
| switch (clk->id) { |
| case CLK_UART5: |
| if (model != S900) |
| return -EINVAL; |
| /* Source HOSC for UART5 interface */ |
| clrbits_le32(priv->base + CMU_UART5CLK, CMU_UARTCLK_SRC_DEVPLL); |
| /* Enable UART5 interface clock */ |
| setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5); |
| break; |
| case CLK_UART3: |
| if (model != S700) |
| return -EINVAL; |
| /* Source HOSC for UART3 interface */ |
| clrbits_le32(priv->base + CMU_UART3CLK, CMU_UARTCLK_SRC_DEVPLL); |
| /* Enable UART3 interface clock */ |
| setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3); |
| break; |
| case CLK_RMII_REF: |
| case CLK_ETHERNET: |
| setbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH); |
| setbits_le32(priv->base + CMU_ETHERNETPLL, 5); |
| break; |
| case CLK_SD0: |
| setbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int owl_clk_disable(struct clk *clk) |
| { |
| struct owl_clk_priv *priv = dev_get_priv(clk->dev); |
| enum owl_soc model = dev_get_driver_data(clk->dev); |
| |
| switch (clk->id) { |
| case CLK_UART5: |
| if (model != S900) |
| return -EINVAL; |
| /* Disable UART5 interface clock */ |
| clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART5); |
| break; |
| case CLK_UART3: |
| if (model != S700) |
| return -EINVAL; |
| /* Disable UART3 interface clock */ |
| clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_UART3); |
| break; |
| case CLK_RMII_REF: |
| case CLK_ETHERNET: |
| clrbits_le32(priv->base + CMU_DEVCLKEN1, CMU_DEVCLKEN1_ETH); |
| break; |
| case CLK_SD0: |
| clrbits_le32(priv->base + CMU_DEVCLKEN0, CMU_DEVCLKEN0_SD0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static ulong get_sd_parent_rate(struct owl_clk_priv *priv, u32 dev_index) |
| { |
| ulong rate; |
| u32 reg; |
| |
| reg = readl(priv->base + (CMU_SD0CLK + dev_index * 0x4)); |
| /* Clock output of DEV/NAND_PLL |
| * Range: 48M ~ 756M |
| * Frequency= PLLCLK * 6 |
| */ |
| if (reg & 0x200) |
| rate = readl(priv->base + CMU_NANDPLL) & 0x7f; |
| else |
| rate = readl(priv->base + CMU_DEVPLL) & 0x7f; |
| |
| rate *= 6000000; |
| |
| return rate; |
| } |
| |
| static ulong owl_get_sd_clk_rate(struct owl_clk_priv *priv, int sd_index) |
| { |
| uint div, val; |
| ulong parent_rate = get_sd_parent_rate(priv, sd_index); |
| |
| val = readl(priv->base + (CMU_SD0CLK + sd_index * 0x4)); |
| div = (val & 0x1f) + 1; |
| |
| return (parent_rate / div); |
| } |
| |
| static ulong owl_set_sd_clk_rate(struct owl_clk_priv *priv, ulong rate, |
| int sd_index) |
| { |
| uint div, val; |
| ulong parent_rate = get_sd_parent_rate(priv, sd_index); |
| |
| if (rate == 0) |
| return rate; |
| |
| div = (parent_rate / rate); |
| |
| val = readl(priv->base + (CMU_SD0CLK + sd_index * 0x4)); |
| /* Bits 4..0 is used to program div value and bit 8 to enable |
| * divide by 128 circuit |
| */ |
| val &= ~0x11f; |
| if (div >= 128) { |
| div = div / 128; |
| val |= 0x100; /* enable divide by 128 circuit */ |
| } |
| val |= ((div - 1) & 0x1f); |
| writel(val, priv->base + (CMU_SD0CLK + sd_index * 0x4)); |
| |
| return owl_get_sd_clk_rate(priv, 0); |
| } |
| |
| static ulong owl_clk_get_rate(struct clk *clk) |
| { |
| struct owl_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong rate; |
| |
| switch (clk->id) { |
| case CLK_SD0: |
| rate = owl_get_sd_clk_rate(priv, 0); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return rate; |
| } |
| |
| static ulong owl_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct owl_clk_priv *priv = dev_get_priv(clk->dev); |
| ulong new_rate; |
| |
| switch (clk->id) { |
| case CLK_SD0: |
| new_rate = owl_set_sd_clk_rate(priv, rate, 0); |
| break; |
| default: |
| return -ENOENT; |
| } |
| |
| return new_rate; |
| } |
| |
| static int owl_clk_probe(struct udevice *dev) |
| { |
| struct owl_clk_priv *priv = dev_get_priv(dev); |
| |
| priv->base = dev_read_addr(dev); |
| if (priv->base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| /* setup necessary clocks */ |
| owl_clk_init(priv); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops owl_clk_ops = { |
| .enable = owl_clk_enable, |
| .disable = owl_clk_disable, |
| .get_rate = owl_clk_get_rate, |
| .set_rate = owl_clk_set_rate, |
| }; |
| |
| static const struct udevice_id owl_clk_ids[] = { |
| #if defined(CONFIG_MACH_S900) |
| { .compatible = "actions,s900-cmu", .data = S900 }, |
| #elif defined(CONFIG_MACH_S700) |
| { .compatible = "actions,s700-cmu", .data = S700 }, |
| #endif |
| { } |
| }; |
| |
| U_BOOT_DRIVER(clk_owl) = { |
| .name = "clk_owl", |
| .id = UCLASS_CLK, |
| .of_match = owl_clk_ids, |
| .ops = &owl_clk_ops, |
| .priv_auto = sizeof(struct owl_clk_priv), |
| .probe = owl_clk_probe, |
| }; |