drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c
index bdc7be0..e1ddd02 100644
--- a/drivers/clk/altera/clk-agilex.c
+++ b/drivers/clk/altera/clk-agilex.c
@@ -242,7 +242,7 @@
if (!cfg)
return;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* Always force clock manager into boot mode before any configuration */
clk_write_ctrl(plat,
CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE);
diff --git a/drivers/clk/altera/clk-agilex5.c b/drivers/clk/altera/clk-agilex5.c
index 72b9234..716c715 100644
--- a/drivers/clk/altera/clk-agilex5.c
+++ b/drivers/clk/altera/clk-agilex5.c
@@ -263,7 +263,7 @@
clk_write_ctrl(plat,
CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE);
} else {
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* Always force clock manager into boot mode before any configuration */
clk_write_ctrl(plat,
CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE);
diff --git a/drivers/clk/altera/clk-n5x.c b/drivers/clk/altera/clk-n5x.c
index 3e25610..09db250 100644
--- a/drivers/clk/altera/clk-n5x.c
+++ b/drivers/clk/altera/clk-n5x.c
@@ -52,7 +52,7 @@
if (!cfg)
return;
-#if IS_ENABLED(CONFIG_SPL_BUILD)
+#if IS_ENABLED(CONFIG_XPL_BUILD)
/* Always force clock manager into boot mode before any configuration */
clk_write_ctrl(plat,
CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE);
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 16169da..a9937c2 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -378,7 +378,7 @@
* However, still set them for SPL. And still set them if explicitly
* asked.
*/
- if (!(IS_ENABLED(CONFIG_SPL_BUILD) || (gd->flags & GD_FLG_RELOC)))
+ if (!(IS_ENABLED(CONFIG_XPL_BUILD) || (gd->flags & GD_FLG_RELOC)))
if (stage != CLK_DEFAULTS_POST_FORCE)
return 0;
diff --git a/drivers/clk/clk_vexpress_osc.c b/drivers/clk/clk_vexpress_osc.c
index 2e0e7bb..85ac92c 100644
--- a/drivers/clk/clk_vexpress_osc.c
+++ b/drivers/clk/clk_vexpress_osc.c
@@ -37,7 +37,7 @@
return data;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate)
{
int err;
@@ -64,7 +64,7 @@
static struct clk_ops vexpress_osc_clk_ops = {
.get_rate = vexpress_osc_clk_get_rate,
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
.set_rate = vexpress_osc_clk_set_rate,
#endif
};
diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c
index b62b464..a8505f6 100644
--- a/drivers/clk/clk_zynq.c
+++ b/drivers/clk/clk_zynq.c
@@ -43,13 +43,13 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
enum zynq_clk_rclk {mio_clk, emio_clk};
#endif
struct zynq_clk_priv {
ulong ps_clk_freq;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
struct clk gem_emio_clk[2];
#endif
};
@@ -75,7 +75,7 @@
return &slcr_base->uart_clk_ctrl;
case spi0_clk ... spi1_clk:
return &slcr_base->spi_clk_ctrl;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case dci_clk:
return &slcr_base->dci_clk_ctrl;
case gem0_clk:
@@ -150,7 +150,7 @@
return priv->ps_clk_freq * mul;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id)
{
u32 clk_ctrl, srcsel;
@@ -199,7 +199,7 @@
return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv)
{
u32 clk_ctrl, div;
@@ -223,7 +223,7 @@
return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv)
{
u32 clk_ctrl, div0, div1;
@@ -251,7 +251,7 @@
if (!div0)
div0 = 1;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
if (two_divs) {
div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
if (!div1)
@@ -268,7 +268,7 @@
div1);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id)
{
struct clk *parent;
@@ -366,7 +366,7 @@
}
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong zynq_clk_get_rate(struct clk *clk)
{
struct zynq_clk_priv *priv = dev_get_priv(clk->dev);
@@ -502,7 +502,7 @@
static struct clk_ops zynq_clk_ops = {
.get_rate = zynq_clk_get_rate,
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
.set_rate = zynq_clk_set_rate,
#endif
.enable = dummy_enable,
@@ -514,7 +514,7 @@
static int zynq_clk_probe(struct udevice *dev)
{
struct zynq_clk_priv *priv = dev_get_priv(dev);
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
unsigned int i;
char name[16];
int ret;
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index a91c676..bb6958f 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -31,7 +31,7 @@
"sys_pll1_400m", "sys_pll2_125m", "sys_pll3_out",
"audio_pll1_out", "video_pll1_out", };
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static const char * const imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", "sys_pll1_800m",
"sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out",
"video_pll1_out", "sys_pll3_out", };
@@ -95,7 +95,7 @@
"sys_pll1_160m", "sys_pll1_200m", };
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static const char * const imx8mm_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m",
"sys_pll1_40m", "sys_pll3_out", "clk_ext1",
"sys_pll1_80m", "video_pll1_out", };
@@ -357,7 +357,7 @@
imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
/* clks not needed in SPL stage */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
clk_dm(IMX8MM_CLK_ENET_AXI,
imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels,
base + 0x8880));
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 125215e..be15ebd 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -37,7 +37,7 @@
"sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out",
"video_pll_out", "sys_pll3_out", };
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static const char * const imx8mn_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m",
"sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out",
"video_pll_out", "clk_ext4", };
@@ -97,7 +97,7 @@
"sys_pll3_out", "audio_pll1_out", "video_pll_out",
"audio_pll2_out", "sys_pll1_133m", };
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static const char * const imx8mn_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m",
"sys_pll1_40m", "sys_pll3_out", "clk_ext1",
"sys_pll1_80m", "video_pll_out", };
@@ -359,7 +359,7 @@
imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));
/* clks not needed in SPL stage */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
clk_dm(IMX8MN_CLK_ENET_REF,
imx8m_clk_composite("enet_ref", imx8mn_enet_ref_sels,
base + 0xa980));
diff --git a/drivers/clk/imx/clk-imxrt1020.c b/drivers/clk/imx/clk-imxrt1020.c
index c80b029..752434c 100644
--- a/drivers/clk/imx/clk-imxrt1020.c
+++ b/drivers/clk/imx/clk-imxrt1020.c
@@ -124,7 +124,7 @@
clk_dm(IMXRT1020_CLK_SEMC,
imx_clk_gate2("semc", "semc_podf", base + 0x74, 4));
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
struct clk *clk, *clk1;
clk_get_by_id(IMXRT1020_CLK_SEMC_SEL, &clk1);
diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c
index 754f394..788e065 100644
--- a/drivers/clk/imx/clk-imxrt1050.c
+++ b/drivers/clk/imx/clk-imxrt1050.c
@@ -180,7 +180,7 @@
struct clk *clk, *clk1;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* bypass pll1 before setting its rate */
clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk);
clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1);
diff --git a/drivers/clk/rockchip/clk_px30.c b/drivers/clk/rockchip/clk_px30.c
index d7825c6..22ede1c 100644
--- a/drivers/clk/rockchip/clk_px30.c
+++ b/drivers/clk/rockchip/clk_px30.c
@@ -989,7 +989,7 @@
return px30_peri_get_clk(priv, clk_id);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong px30_crypto_get_clk(struct px30_clk_priv *priv, ulong clk_id)
{
struct px30_cru *cru = priv->cru;
@@ -1261,7 +1261,7 @@
case HCLK_PERI_PRE:
rate = px30_peri_get_clk(priv, clk->id);
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case SCLK_CRYPTO:
case SCLK_CRYPTO_APK:
rate = px30_crypto_get_clk(priv, clk->id);
@@ -1345,7 +1345,7 @@
case HCLK_PERI_PRE:
ret = px30_peri_set_clk(priv, clk->id, rate);
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case SCLK_CRYPTO:
case SCLK_CRYPTO_APK:
ret = px30_crypto_set_clk(priv, clk->id, rate);
diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c
index f569a10..d8b03e1 100644
--- a/drivers/clk/rockchip/clk_rk3188.c
+++ b/drivers/clk/rockchip/clk_rk3188.c
@@ -80,7 +80,7 @@
"divisors on line " __stringify(__LINE__));
/* Keep divisors as low as possible to reduce jitter and power usage */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
#endif
@@ -371,7 +371,7 @@
return rockchip_spi_get_clk(cru, gclk_rate, periph);
}
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,
bool has_bwadj)
{
@@ -557,7 +557,7 @@
return PTR_ERR(priv->grf);
priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3188_clk_plat *plat = dev_get_plat(dev);
diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c
index 432a792..43c44fa 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -223,7 +223,7 @@
return 0;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define VCO_MAX_KHZ 2200000
#define VCO_MIN_KHZ 440000
#define FREF_MAX_KHZ 2200000
@@ -421,7 +421,7 @@
return rockchip_i2s_get_clk(cru, gclk_rate);
}
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
static void rkclk_init(struct rockchip_cru *cru, struct rk3288_grf *grf)
{
@@ -819,7 +819,7 @@
case SCLK_SPI2:
new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate);
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case SCLK_I2S0:
new_rate = rockchip_i2s_set_clk(cru, gclk_rate, rate);
break;
@@ -973,7 +973,7 @@
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR(priv->grf))
return PTR_ERR(priv->grf);
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3288_clk_plat *plat = dev_get_plat(dev);
diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c
index 9137dbe..7701a97 100644
--- a/drivers/clk/rockchip/clk_rk3328.c
+++ b/drivers/clk/rockchip/clk_rk3328.c
@@ -582,7 +582,7 @@
return rk3328_spi_get_clk(cru);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong rk3328_vop_get_clk(struct rk3328_clk_priv *priv, ulong clk_id)
{
struct rk3328_cru *cru = priv->cru;
@@ -746,7 +746,7 @@
case SCLK_SPI:
ret = rk3328_spi_set_clk(priv->cru, rate);
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case DCLK_LCDC:
case ACLK_VOP_PRE:
case ACLK_VIO_PRE:
diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index d894398..630253f 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -50,7 +50,7 @@
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \
"divisors on line " __stringify(__LINE__));
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
+#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2);
static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2);
#if !defined(CONFIG_TPL_BUILD)
@@ -88,7 +88,7 @@
}
}
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
+#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id,
const struct pll_div *div)
{
@@ -130,7 +130,7 @@
}
#endif
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
+#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static void rkclk_init(struct rk3368_cru *cru)
{
u32 apllb, aplll, dpll, cpll, gpll;
@@ -157,7 +157,7 @@
}
#endif
-#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC)
+#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC)
static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id)
{
u32 div, con, con_id, rate;
@@ -469,7 +469,7 @@
case SCLK_SPI0 ... SCLK_SPI2:
rate = rk3368_spi_get_clk(priv->cru, clk->id);
break;
-#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC)
+#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC)
case HCLK_SDMMC:
case HCLK_EMMC:
rate = rk3368_mmc_get_clk(priv->cru, clk->id);
@@ -500,7 +500,7 @@
ret = rk3368_ddr_set_clk(priv->cru, rate);
break;
#endif
-#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC)
+#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC)
case HCLK_SDMMC:
case HCLK_EMMC:
ret = rk3368_mmc_set_clk(clk, rate);
@@ -586,7 +586,7 @@
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
+#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
rkclk_init(priv->cru);
#endif
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 8992404..155ea8d 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -56,7 +56,7 @@
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
-#if !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_XPL_BUILD)
static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
#endif
@@ -1464,7 +1464,7 @@
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
init_clocks = true;
#elif CONFIG_IS_ENABLED(HANDOFF)
if (!(gd->flags & GD_FLG_RELOC)) {
@@ -1658,7 +1658,7 @@
.set_rate = rk3399_pmuclk_set_rate,
};
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static void pmuclk_init(struct rk3399_pmucru *pmucru)
{
u32 pclk_div;
@@ -1676,7 +1676,7 @@
static int rk3399_pmuclk_probe(struct udevice *dev)
{
-#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD)
+#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_XPL_BUILD)
struct rk3399_pmuclk_priv *priv = dev_get_priv(dev);
#endif
@@ -1686,7 +1686,7 @@
priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
pmuclk_init(priv->pmucru);
#endif
return 0;
diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c
index 3556350..977699d 100644
--- a/drivers/clk/rockchip/clk_rk3568.c
+++ b/drivers/clk/rockchip/clk_rk3568.c
@@ -91,7 +91,7 @@
RK3568_PMU_MODE, 2, 10, 0, rk3568_pll_rates),
};
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong
rk3568_pmu_pll_set_rate(struct rk3568_clk_priv *priv,
ulong pll_id, ulong rate)
@@ -1707,7 +1707,7 @@
return rk3568_emmc_get_bclk(priv);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong rk3568_aclk_vop_get_clk(struct rk3568_clk_priv *priv)
{
struct rk3568_cru *cru = priv->cru;
@@ -2413,7 +2413,7 @@
case TCLK_EMMC:
rate = OSC_HZ;
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case ACLK_VOP:
rate = rk3568_aclk_vop_get_clk(priv);
break;
@@ -2594,7 +2594,7 @@
case TCLK_EMMC:
ret = OSC_HZ;
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case ACLK_VOP:
ret = rk3568_aclk_vop_set_clk(priv, rate);
break;
@@ -2894,7 +2894,7 @@
priv->gpll_hz = GPLL_HZ;
}
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
ret = rk3568_bus_set_clk(priv, ACLK_BUS, 150000000);
if (ret < 0)
printf("Fail to set the ACLK_BUS clock.\n");
diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c
index db1384d..6042fc1 100644
--- a/drivers/clk/rockchip/clk_rk3588.c
+++ b/drivers/clk/rockchip/clk_rk3588.c
@@ -65,7 +65,7 @@
RK3588_MODE_CON0, 0, 15, 0, rk3588_pll_rates),
[PPLL] = PLL(pll_rk3588, PLL_PPLL, RK3588_PMU_PLL_CON(128),
RK3588_MODE_CON0, 10, 15, 0, rk3588_pll_rates),
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/*
* The SPLL is part of the SBUSCRU, not the main CRU and as
* such only directly accessible during the SPL stage.
@@ -76,7 +76,7 @@
};
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
/*
*
* rational_best_approximation(31415, 10000,
@@ -875,7 +875,7 @@
return rk3588_mmc_get_clk(priv, clk_id);
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static ulong rk3588_aux16m_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
{
struct rk3588_cru *cru = priv->cru;
@@ -1600,7 +1600,7 @@
case CLK_GPU:
rate = 200000000;
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case CLK_AUX16M_0:
case CLK_AUX16M_1:
rate = rk3588_aux16m_get_clk(priv, clk->id);
@@ -1760,7 +1760,7 @@
case CLK_150M_SRC:
ret = 0;
break;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
case CLK_AUX16M_0:
case CLK_AUX16M_1:
ret = rk3588_aux16m_set_clk(priv, clk->id, rate);
@@ -1965,7 +1965,7 @@
priv->sync_kernel = false;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
rockchip_pll_set_rate(&rk3588_pll_clks[B0PLL], priv->cru,
B0PLL, LPLL_HZ);
rockchip_pll_set_rate(&rk3588_pll_clks[B1PLL], priv->cru,
@@ -2051,7 +2051,7 @@
.probe = rk3588_clk_probe,
};
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define SCRU_BASE 0xfd7d0000
#define SBUSCRU_BASE 0xfd7d8000
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
index aa26d3a..de55504 100644
--- a/drivers/clk/sifive/sifive-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -670,7 +670,7 @@
__prci_wrpll_read_cfg0(pd, pc->pwd);
}
- if (IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (IS_ENABLED(CONFIG_XPL_BUILD)) {
if (device_is_compatible(dev, "sifive,fu740-c000-prci")) {
u32 prci_pll_reg;
unsigned long parent_rate;
diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c
index 5810358..6d2bfb3 100644
--- a/drivers/clk/starfive/clk-jh7110-pll.c
+++ b/drivers/clk/starfive/clk-jh7110-pll.c
@@ -348,10 +348,10 @@
return ERR_PTR(ret);
}
- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL0)
+ if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL0)
jh7110_pllx_set_rate(clk, 1000000000);
- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL2)
+ if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL2)
jh7110_pllx_set_rate(clk, 1188000000);
return clk;
diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c
index 204ac17..4044edf 100644
--- a/drivers/clk/stm32/clk-stm32mp1.c
+++ b/drivers/clk/stm32/clk-stm32mp1.c
@@ -26,7 +26,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
/* activate clock tree initialization in the driver */
#define STM32MP1_CLOCK_TREE_INIT
#endif
@@ -2279,7 +2279,7 @@
dev_err(dev, "clock tree initialization failed (%d)\n", result);
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#if defined(VERBOSE_DEBUG)
/* display debug information for probe after relocation */
if (gd->flags & GD_FLG_RELOC)
@@ -2314,7 +2314,7 @@
.disable = stm32mp1_clk_disable,
.get_rate = stm32mp1_clk_get_rate,
.set_rate = stm32mp1_clk_set_rate,
-#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD)
+#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_XPL_BUILD)
.dump = stm32mp1_clk_dump,
#endif
};