sunxi: video: Add lcd output support
Add lcd output support, see the new Kconfig entries and doc/README.video for
how to enable / configure this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index ad38f16..46346ee 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -11,7 +11,9 @@
#include <asm/arch/clock.h>
#include <asm/arch/display.h>
+#include <asm/arch/gpio.h>
#include <asm/global_data.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <errno.h>
#include <fdtdec.h>
@@ -34,6 +36,7 @@
GraphicDevice graphic_device;
bool enabled;
enum sunxi_monitor monitor;
+ unsigned int depth;
} sunxi_display;
/*
@@ -435,6 +438,134 @@
setbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_TCON_ENABLE);
}
+static void sunxi_lcdc_panel_enable(void)
+{
+ int pin;
+
+ /*
+ * Start with backlight disabled to avoid the screen flashing to
+ * white while the lcd inits.
+ */
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
+ if (pin != -1) {
+ gpio_request(pin, "lcd_backlight_enable");
+ gpio_direction_output(pin, 0);
+ }
+
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
+ if (pin != -1) {
+ gpio_request(pin, "lcd_backlight_pwm");
+ /* backlight pwm is inverted, set to 1 to disable backlight */
+ gpio_direction_output(pin, 1);
+ }
+
+ /* Give the backlight some time to turn off and power up the panel. */
+ mdelay(40);
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
+ if (pin != -1) {
+ gpio_request(pin, "lcd_power");
+ gpio_direction_output(pin, 1);
+ }
+}
+
+static void sunxi_lcdc_backlight_enable(void)
+{
+ int pin;
+
+ /*
+ * We want to have scanned out at least one frame before enabling the
+ * backlight to avoid the screen flashing to white when we enable it.
+ */
+ mdelay(40);
+
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
+ if (pin != -1)
+ gpio_direction_output(pin, 1);
+
+ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
+ if (pin != -1) {
+ /* backlight pwm is inverted, set to 0 to enable backlight */
+ gpio_direction_output(pin, 0);
+ }
+}
+
+static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode)
+{
+ int delay;
+
+ delay = mode->lower_margin + mode->vsync_len + mode->upper_margin - 2;
+ return (delay > 30) ? 30 : delay;
+}
+
+static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
+{
+ struct sunxi_lcdc_reg * const lcdc =
+ (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+ int bp, clk_delay, clk_div, clk_double, pin, total, val;
+
+ for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPD0_LCD0);
+
+ sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double);
+
+ /* Use tcon0 */
+ clrsetbits_le32(&lcdc->ctrl, SUNXI_LCDC_CTRL_IO_MAP_MASK,
+ SUNXI_LCDC_CTRL_IO_MAP_TCON0);
+
+ clk_delay = sunxi_lcdc_get_clk_delay(mode);
+ writel(SUNXI_LCDC_TCON0_CTRL_ENABLE |
+ SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(clk_delay), &lcdc->tcon0_ctrl);
+
+ writel(SUNXI_LCDC_TCON0_DCLK_ENABLE |
+ SUNXI_LCDC_TCON0_DCLK_DIV(clk_div), &lcdc->tcon0_dclk);
+
+ writel(SUNXI_LCDC_X(mode->xres) | SUNXI_LCDC_Y(mode->yres),
+ &lcdc->tcon0_timing_active);
+
+ bp = mode->hsync_len + mode->left_margin;
+ total = mode->xres + mode->right_margin + bp;
+ writel(SUNXI_LCDC_TCON0_TIMING_H_TOTAL(total) |
+ SUNXI_LCDC_TCON0_TIMING_H_BP(bp), &lcdc->tcon0_timing_h);
+
+ bp = mode->vsync_len + mode->upper_margin;
+ total = mode->yres + mode->lower_margin + bp;
+ writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) |
+ SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v);
+
+ writel(SUNXI_LCDC_X(mode->hsync_len) | SUNXI_LCDC_Y(mode->vsync_len),
+ &lcdc->tcon0_timing_sync);
+
+ /* We only support hv-sync parallel lcd-s for now */
+ writel(0, &lcdc->tcon0_hv_intf);
+ writel(0, &lcdc->tcon0_cpu_intf);
+
+ if (sunxi_display.depth == 18 || sunxi_display.depth == 16) {
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[0]);
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[1]);
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[2]);
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[3]);
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[4]);
+ writel(SUNXI_LCDC_TCON0_FRM_SEED, &lcdc->tcon0_frm_seed[5]);
+ writel(SUNXI_LCDC_TCON0_FRM_TAB0, &lcdc->tcon0_frm_table[0]);
+ writel(SUNXI_LCDC_TCON0_FRM_TAB1, &lcdc->tcon0_frm_table[1]);
+ writel(SUNXI_LCDC_TCON0_FRM_TAB2, &lcdc->tcon0_frm_table[2]);
+ writel(SUNXI_LCDC_TCON0_FRM_TAB3, &lcdc->tcon0_frm_table[3]);
+ writel(((sunxi_display.depth == 18) ?
+ SUNXI_LCDC_TCON0_FRM_CTRL_RGB666 :
+ SUNXI_LCDC_TCON0_FRM_CTRL_RGB565),
+ &lcdc->tcon0_frm_ctrl);
+ }
+
+ val = 0;
+ if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
+ val |= SUNXI_LCDC_TCON_HSYNC_MASK;
+ if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
+ val |= SUNXI_LCDC_TCON_VSYNC_MASK;
+ writel(val, &lcdc->tcon0_io_polarity);
+
+ writel(0, &lcdc->tcon0_io_tristate);
+}
+
static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
int *clk_div, int *clk_double)
{
@@ -618,7 +749,12 @@
}
break;
case sunxi_monitor_lcd:
- /* TODO */
+ sunxi_lcdc_panel_enable();
+ sunxi_composer_mode_set(mode, address);
+ sunxi_lcdc_tcon0_mode_set(mode);
+ sunxi_composer_enable();
+ sunxi_lcdc_enable();
+ sunxi_lcdc_backlight_enable();
break;
case sunxi_monitor_vga:
break;
@@ -641,11 +777,11 @@
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
const struct ctfb_res_modes *mode;
- struct ctfb_res_modes edid_mode;
+ struct ctfb_res_modes custom;
const char *options;
- unsigned int depth;
int i, ret, hpd, edid;
char mon[16];
+ char *lcd_mode = CONFIG_VIDEO_LCD_MODE;
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
@@ -653,7 +789,8 @@
CONFIG_SUNXI_FB_SIZE >> 10);
gd->fb_base = gd->ram_top;
- video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, &depth, &options);
+ video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode,
+ &sunxi_display.depth, &options);
hpd = video_get_option_int(options, "hpd", 1);
edid = video_get_option_int(options, "edid", 1);
sunxi_display.monitor = sunxi_monitor_dvi;
@@ -678,16 +815,26 @@
ret = sunxi_hdmi_hpd_detect();
if (ret) {
printf("HDMI connected: ");
- if (edid && sunxi_hdmi_edid_get_mode(&edid_mode) == 0)
- mode = &edid_mode;
+ if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0)
+ mode = &custom;
break;
}
if (!hpd)
break; /* User has requested to ignore hpd */
sunxi_hdmi_shutdown();
- return NULL;
+
+ if (lcd_mode[0] == 0)
+ return NULL; /* No LCD, bail */
+
+ /* Fall back / through to LCD */
+ sunxi_display.monitor = sunxi_monitor_lcd;
case sunxi_monitor_lcd:
+ if (lcd_mode[0]) {
+ sunxi_display.depth = video_get_params(&custom, lcd_mode);
+ mode = &custom;
+ break;
+ }
printf("LCD not supported on this board\n");
return NULL;
case sunxi_monitor_vga:
@@ -729,16 +876,31 @@
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
int offset, ret;
+ const char *pipeline = NULL;
if (!sunxi_display.enabled)
return 0;
+
+ switch (sunxi_display.monitor) {
+ case sunxi_monitor_none:
+ return 0;
+ case sunxi_monitor_dvi:
+ case sunxi_monitor_hdmi:
+ pipeline = "de_be0-lcd0-hdmi";
+ break;
+ case sunxi_monitor_lcd:
+ pipeline = "de_be0-lcd0";
+ break;
+ case sunxi_monitor_vga:
+ break;
+ }
- /* Find a framebuffer node, with pipeline == "de_be0-lcd0-hdmi" */
+ /* Find a prefilled simpefb node, matching out pipeline config */
offset = fdt_node_offset_by_compatible(blob, -1,
"allwinner,simple-framebuffer");
while (offset >= 0) {
ret = fdt_find_string(blob, offset, "allwinner,pipeline",
- "de_be0-lcd0-hdmi");
+ pipeline);
if (ret == 0)
break;
offset = fdt_node_offset_by_compatible(blob, offset,