atmel_mci: Show SR when block read fails
Show controller status as well as card status when an error occurs
during block read.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index cf48be1..f59dfb5 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -198,11 +198,11 @@
/* Put the device into Transfer state */
ret = mmc_cmd(MMC_CMD_SELECT_CARD, mmc_rca << 16, resp, R1 | NCR);
- if (ret) goto fail;
+ if (ret) goto out;
/* Set block length */
ret = mmc_cmd(MMC_CMD_SET_BLOCKLEN, mmc_blkdev.blksz, resp, R1 | NCR);
- if (ret) goto fail;
+ if (ret) goto out;
pr_debug("MCI_DTOR = %08lx\n", mmci_readl(DTOR));
@@ -211,7 +211,7 @@
start * mmc_blkdev.blksz, resp,
(R1 | NCR | TRCMD_START | TRDIR_READ
| TRTYP_BLOCK));
- if (ret) goto fail;
+ if (ret) goto out;
ret = -EIO;
wordcount = 0;
@@ -219,7 +219,7 @@
do {
status = mmci_readl(SR);
if (status & (ERROR_FLAGS | MMCI_BIT(OVRE)))
- goto fail;
+ goto read_error;
} while (!(status & MMCI_BIT(RXRDY)));
if (status & MMCI_BIT(RXRDY)) {
@@ -244,9 +244,10 @@
mmc_cmd(MMC_CMD_SELECT_CARD, 0, resp, NCR);
return i;
-fail:
+read_error:
mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
- printf("mmc: bread failed, card status = %08x\n", card_status);
+ printf("mmc: bread failed, status = %08x, card status = %08x\n",
+ status, card_status);
goto out;
}