mpc85xx: Adding more registers and options
This patch exposes more registers which can be used by the DDR drivers or
interactive debugging. U-boot doesn't use all the registers in DDRC.
When advanced tuning is required, writing to those registers is needed.
Add writing to cdr1, cdr2, err_disable, err_int_en and debug registers
Add options to override rcw, address parity to RDIMMs.
Use array for debug registers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 3de2113..04aeb40 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -120,6 +120,11 @@
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
unsigned int ddr_eor;
+ unsigned int ddr_cdr1;
+ unsigned int ddr_cdr2;
+ unsigned int err_disable;
+ unsigned int err_int_en;
+ unsigned int debug[32];
} fsl_ddr_cfg_regs_t;
typedef struct memctl_options_partial_s {
@@ -175,6 +180,7 @@
/* mirrior DIMMs for DDR3 */
unsigned int mirrored_dimm;
unsigned int quad_rank_present;
+ unsigned int ap_en; /* address parity enable for RDIMM */
/* Global Timing Parameters */
unsigned int cas_latency_override;
@@ -210,6 +216,12 @@
unsigned int zq_en;
/* Write leveling */
unsigned int wrlvl_en;
+ /* RCW override for RDIMM */
+ unsigned int rcw_override;
+ unsigned int rcw_1;
+ unsigned int rcw_2;
+ /* control register 1 */
+ unsigned int ddr_cdr1;
} memctl_options_t;
extern phys_size_t fsl_ddr_sdram(void);
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 93a9e6c..6bd83ba 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -222,25 +222,8 @@
u32 capture_ext_address; /* Error Extended Addr Capture */
u32 err_sbe; /* Single-Bit ECC Error Management */
u8 res11[164];
- u32 debug_1;
- u32 debug_2;
- u32 debug_3;
- u32 debug_4;
- u32 debug_5;
- u32 debug_6;
- u32 debug_7;
- u32 debug_8;
- u32 debug_9;
- u32 debug_10;
- u32 debug_11;
- u32 debug_12;
- u32 debug_13;
- u32 debug_14;
- u32 debug_15;
- u32 debug_16;
- u32 debug_17;
- u32 debug_18;
- u8 res12[184];
+ u32 debug[32]; /* debug_1 to debug_32 */
+ u8 res12[128];
} ccsr_ddr_t;
#define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */