net: designware: Fix alignment of buffer descriptors
It's important that buffer descriptors are aligned in accordance to GMAC
data bus width (32/64/128-bit). It's safe to align to 128-bit (16-bytes)
for every bus width type.
If buffer descriptor is improperly aligned GMAC discards lower bits of
provided address and as a result reads from improper location that
doesn't match expected fields.
Commit ef76025a99247cdb8f927a2c9f15400678dfb599 "net: Multiple
updates/enhancements to designware.c" introduced another structure
member "link_printed" right before buffer descriptors while "padding"
member was left untouched. This together with alignment of structure
itself to 16-byte boundary forces buffer descriptoprs always to be
4-byte aligned that causes driver complete disfunction if GMAC bus width
is 64 or 128-bit.
Proposed change makes sure all buffer descriptors are 16-byte (128-bit)
aligned.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Patch: 277902
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
index e80002a..5440c92 100644
--- a/drivers/net/designware.h
+++ b/drivers/net/designware.h
@@ -112,7 +112,7 @@
u32 dmamac_cntl;
void *dmamac_addr;
struct dmamacdescr *dmamac_next;
-};
+} __aligned(16);
/*
* txrx_status definitions
@@ -224,8 +224,7 @@
u32 tx_currdescnum;
u32 rx_currdescnum;
u32 phy_configured;
- int link_printed;
- u32 padding;
+ u32 link_printed;
struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
@@ -237,7 +236,7 @@
struct eth_dma_regs *dma_regs_p;
struct eth_device *dev;
-} __attribute__ ((aligned(8)));
+};
/* Speed specific definitions */
#define SPEED_10M 1