dm: fsl_i2c: Rename I2C register structure

Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/board/keymile/km83xx/km83xx_i2c.c b/board/keymile/km83xx/km83xx_i2c.c
index c961937..f0b528d 100644
--- a/board/keymile/km83xx/km83xx_i2c.c
+++ b/board/keymile/km83xx/km83xx_i2c.c
@@ -13,31 +13,33 @@
 
 static void i2c_write_start_seq(void)
 {
-	struct fsl_i2c *dev;
-	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
+	struct fsl_i2c_base *base;
+	base = (struct fsl_i2c_base *)(CONFIG_SYS_IMMR +
+			CONFIG_SYS_I2C_OFFSET);
 	udelay(DELAY_ABORT_SEQ);
-	out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
+	out_8(&base->cr, (I2C_CR_MEN | I2C_CR_MSTA));
 	udelay(DELAY_ABORT_SEQ);
-	out_8(&dev->cr, (I2C_CR_MEN));
+	out_8(&base->cr, (I2C_CR_MEN));
 }
 
 int i2c_make_abort(void)
 {
-	struct fsl_i2c *dev;
-	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
+	struct fsl_i2c_base *base;
+	base = (struct fsl_i2c_base *)(CONFIG_SYS_IMMR +
+			CONFIG_SYS_I2C_OFFSET);
 	uchar   last;
 	int     nbr_read = 0;
 	int     i = 0;
 	int	    ret = 0;
 
 	/* wait after each operation to finsh with a delay */
-	out_8(&dev->cr, (I2C_CR_MSTA));
+	out_8(&base->cr, (I2C_CR_MSTA));
 	udelay(DELAY_ABORT_SEQ);
-	out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
+	out_8(&base->cr, (I2C_CR_MEN | I2C_CR_MSTA));
 	udelay(DELAY_ABORT_SEQ);
-	in_8(&dev->dr);
+	in_8(&base->dr);
 	udelay(DELAY_ABORT_SEQ);
-	last = in_8(&dev->dr);
+	last = in_8(&base->dr);
 	nbr_read++;
 
 	/*
@@ -47,7 +49,7 @@
 	while (((last & 0x01) != 0x01) &&
 		(nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) {
 		udelay(DELAY_ABORT_SEQ);
-		last = in_8(&dev->dr);
+		last = in_8(&base->dr);
 		nbr_read++;
 	}
 	if ((last & 0x01) != 0x01)
@@ -56,10 +58,10 @@
 		printf("[INFO] i2c abort after %d bytes (0x%02x)\n",
 			nbr_read, last);
 	udelay(DELAY_ABORT_SEQ);
-	out_8(&dev->cr, (I2C_CR_MEN));
+	out_8(&base->cr, (I2C_CR_MEN));
 	udelay(DELAY_ABORT_SEQ);
 	/* clear status reg */
-	out_8(&dev->sr, 0);
+	out_8(&base->sr, 0);
 
 	for (i = 0; i < 5; i++)
 		i2c_write_start_seq();