cfi_flash: enable M18 flash chips family support.
Added new command set ID. Buffered write command processing is changed
in order to support M18 flash chips family.
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 90cb966..a2d88ea 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -76,7 +76,9 @@
#define FLASH_CMD_PROTECT_SET 0x01
#define FLASH_CMD_PROTECT_CLEAR 0xD0
#define FLASH_CMD_CLEAR_STATUS 0x50
+#define FLASH_CMD_READ_STATUS 0x70
#define FLASH_CMD_WRITE_TO_BUFFER 0xE8
+#define FLASH_CMD_WRITE_BUFFER_PROG 0xE9
#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0
#define FLASH_STATUS_DONE 0x80
@@ -136,6 +138,7 @@
#define CFI_CMDSET_MITSU_STANDARD 256
#define CFI_CMDSET_MITSU_EXTENDED 257
#define CFI_CMDSET_SST 258
+#define CFI_CMDSET_INTEL_PROG_REGIONS 512
#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
# undef FLASH_CMD_RESET
@@ -613,6 +616,7 @@
int retval;
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
retval = !flash_isset (info, sect, 0, FLASH_STATUS_DONE);
@@ -672,6 +676,7 @@
retcode = flash_status_check (info, sector, tout, prompt);
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
if ((retcode == ERR_OK)
@@ -800,6 +805,7 @@
flag = disable_interrupts ();
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
flash_write_cmd (info, 0, 0, FLASH_CMD_CLEAR_STATUS);
@@ -854,6 +860,7 @@
int flag = 0;
uint offset = 0;
unsigned int shift;
+ uchar write_cmd;
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -908,10 +915,14 @@
sector = find_sector (info, dest);
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
+ write_cmd = (info->vendor == CFI_CMDSET_INTEL_PROG_REGIONS) ?
+ FLASH_CMD_WRITE_BUFFER_PROG : FLASH_CMD_WRITE_TO_BUFFER;
flash_write_cmd (info, sector, 0, FLASH_CMD_CLEAR_STATUS);
- flash_write_cmd (info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+ flash_write_cmd (info, sector, 0, FLASH_CMD_READ_STATUS);
+ flash_write_cmd (info, sector, 0, write_cmd);
retcode = flash_status_check (info, sector,
info->buffer_write_tout,
"write to buffer");
@@ -961,7 +972,7 @@
#endif
flash_write_cmd(info, sector, offset, AMD_CMD_WRITE_TO_BUFFER);
cnt = len >> shift;
- flash_write_cmd(info, sector, offset, cnt - 1);
+ flash_write_cmd(info, sector, offset, (uchar)cnt - 1);
switch (info->portwidth) {
case FLASH_CFI_8BIT:
@@ -1046,6 +1057,7 @@
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
flash_write_cmd (info, sect, 0,
@@ -1114,6 +1126,9 @@
info->size >> 20, info->sector_count);
printf (" ");
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
+ printf ("Intel Prog Regions");
+ break;
case CFI_CMDSET_INTEL_STANDARD:
printf ("Intel Standard");
break;
@@ -1504,6 +1519,7 @@
info->device_id2 = 0;
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
cmdset_intel_read_jedec_ids(info);
@@ -1558,6 +1574,7 @@
}
switch(info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
info->cmd_reset = FLASH_CMD_RESET;
@@ -1753,6 +1770,7 @@
#endif
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
cmdset_intel_init(info, &qry);
@@ -1830,6 +1848,7 @@
* supported devices (intel...)
*/
switch (info->vendor) {
+ case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
info->protect[sect_cnt] =