Merge with rsync://git-user@source.denx.net/git/u-boot.git
diff --git a/CHANGELOG b/CHANGELOG
index 281072e..27c013f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -46,6 +46,29 @@
Eliminates the CONFIG_MPC8560 option entirely. Distributes the
new CONFIG_CPM2 option to each 8260 board.
+* Patch by Stefan Roese, 01 Aug 2005:
+ - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+ (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+ for details.
+ - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+ to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+ - Add support for AMCC PPC440EP/GR.
+ - Add support for AMCC Yosemite PPC440EP eval board.
+ - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+ - fix alignment of NAND size
+ - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+ The code is provided for, and was tested on, the Yukon/Alaska
+ and PM520 boards only.
+
+ A bug in flash_real_protect() for the Yukon board was fixed by
+ adding a function that tells if two banks are on one flash chip.
+
* Fix sysmon POST problem: check I2C error codes
This fixes a problem of displaying bogus voltages when the voltages
are so low that the I2C devices start failing while the rest of the
diff --git a/MAINTAINERS b/MAINTAINERS
index 088ef98..7525dcc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -210,6 +210,11 @@
GEN860T MPC860T
GEN860T_SC MPC860T
+Stefan Roese <sr@denx.de>
+
+ sycamore PPC4xx
+ walnut PPC4xx
+
Frank Panno <fpanno@delphintech.com>
ep8260 MPC8260
@@ -327,7 +332,6 @@
CRAYL1 PPC4xx
ERIC PPC4xx
- WALNUT405 PPC4xx
MOUSSE MPC824x
diff --git a/MAKEALL b/MAKEALL
index 2a70320..e221de9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -60,16 +60,17 @@
#########################################################################
LIST_4xx=" \
- ADCIOP AR405 ASH405 BUBINGA405EP \
+ ADCIOP AR405 ASH405 bubinga \
CANBT CPCI405 CPCI4052 CPCI405AB \
CPCI440 CPCIISER4 CRAYL1 csb272 \
csb472 DASA_SIM DP405 DU405 \
- EBONY ERIC EXBITGEN HUB405 \
+ ebony ERIC EXBITGEN HUB405 \
JSE MIP405 MIP405T ML2 \
- ml300 OCOTEA OCRTC ORSG \
+ ml300 ocotea OCRTC ORSG \
PCI405 PIP405 PLU405 PMC405 \
PPChameleonEVB VOH405 W7OLMC W7OLMG \
- WALNUT405 WUH405 XPEDITE1K \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 90a6228..4e7fa6b 100644
--- a/Makefile
+++ b/Makefile
@@ -710,8 +710,11 @@
ASH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
-BUBINGA405EP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -762,8 +765,8 @@
DU405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
-EBONY_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -797,8 +800,8 @@
ml300_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
-OCOTEA_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
@@ -849,6 +852,10 @@
sbc405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx sbc405
+sycamore_config: unconfig
+ @echo "Configuring for sycamore board as subset of walnut..."
+ @./mkconfig -a walnut ppc ppc4xx walnut amcc
+
VOH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
@@ -859,8 +866,8 @@
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
-WALNUT405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
WUH405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -868,6 +875,12 @@
XPEDITE1K_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+yosemite_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
#########################################################################
## MPC8220 Systems
#########################################################################
diff --git a/README b/README
index b20ede4..9283c5e 100644
--- a/README
+++ b/README
@@ -295,7 +295,7 @@
CONFIG_FADS823 CONFIG_NETTA CONFIG_V37
CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMC
CONFIG_FADS860T CONFIG_NX823 CONFIG_W7OLMG
- CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT405
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT
CONFIG_FPS850L CONFIG_ORSG CONFIG_ZPC1900
CONFIG_FPS860L CONFIG_OXC CONFIG_ZUMA
@@ -2192,7 +2192,7 @@
FADS850SAR_config omap1510inn_config TQM850L_config
FADS860T_config omap1610h2_config TQM855L_config
FPS850L_config omap1610inn_config TQM860L_config
- omap5912osk_config WALNUT405_config
+ omap5912osk_config walnut_config
omap2420h4_config Yukon8220_config
ZPC1900_config
@@ -3135,7 +3135,7 @@
CFG_INIT_RAM_ADDR should be somewhere that won't interfere
with your processor/board/system design. The default value
you will find in any recent u-boot distribution in
- Walnut405.h should work for you. I'd set it to a value larger
+ walnut.h should work for you. I'd set it to a value larger
than your SDRAM module. If you have a 64MB SDRAM module, set
it above 400_0000. Just make sure your board has no resources
that are supposed to respond to that address! That code in
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
index 48c9472..383491f 100644
--- a/board/alaska/flash.c
+++ b/board/alaska/flash.c
@@ -64,7 +64,6 @@
#define FLASH_CYCLE2 0x02aa
#define WR_BLOCK 0x20
-
/*-----------------------------------------------------------------------
* Functions
*/
@@ -74,6 +73,9 @@
static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
static void flash_get_offsets (ulong base, flash_info_t * info);
void inline spin_wheel (void);
+static void flash_sync_real_protect (flash_info_t * info);
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
+static unsigned char same_chip_banks (int bank1, int bank2);
/*-----------------------------------------------------------------------
*/
@@ -115,6 +117,9 @@
break;
}
size += flash_info[i].size;
+
+ /* get the h/w and s/w protection status in sync */
+ flash_sync_real_protect(&flash_info[i]);
}
/* Protect monitor and environment sectors
@@ -167,7 +172,6 @@
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE);
- info->protect[i] = 0;
}
}
}
@@ -305,6 +309,98 @@
}
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+static void flash_sync_real_protect (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F128J3A:
+ for (i = 0; i < info->sector_count; ++i) {
+ info->protect[i] = intel_sector_protected(info, i);
+ }
+ break;
+ case FLASH_AM040:
+ default:
+ /* no h/w protect support */
+ break;
+ }
+}
+
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
+{
+ FPWV *addr;
+ FPWV *lock_conf_addr;
+ ulong start;
+ unsigned char ret;
+
+ /*
+ * first, wait for the WSM to be finished. The rationale for
+ * waiting for the WSM to become idle for at most
+ * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * because of: (1) erase, (2) program or (3) lock bit
+ * configuration. So we just wait for the longest timeout of
+ * the (1)-(3), i.e. the erase timeout.
+ */
+
+ /* wait at least 35ns (W12) before issuing Read Status Register */
+ udelay(1);
+ addr = (FPWV *) info->start[sector];
+ *addr = (FPW) INTEL_STATUS;
+
+ start = get_timer (0);
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ printf("WSM busy too long, can't get prot status\n");
+ return 1;
+ }
+ }
+
+ /* issue the Read Identifier Codes command */
+ *addr = (FPW) INTEL_READID;
+
+ /* wait at least 35ns (W12) before reading */
+ udelay(1);
+
+ /* Intel example code uses offset of 4 for 8-bit flash */
+ lock_conf_addr = (FPWV *) info->start[sector] + 4;
+ ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+ /* put flash back in read mode */
+ *addr = (FPW) INTEL_RESET;
+
+ return ret;
+}
+
+
+/*
+ * Checks if "bank1" and "bank2" are on the same chip. Returns 1 if they
+ * are and 0 otherwise.
+ */
+static unsigned char same_chip_banks (int bank1, int bank2)
+{
+ unsigned char same_chip[CFG_MAX_FLASH_BANKS][CFG_MAX_FLASH_BANKS] = {
+ {1, 1, 0, 0},
+ {1, 1, 0, 0},
+ {0, 0, 1, 1},
+ {0, 0, 1, 1}
+ };
+ return same_chip[bank1][bank2];
+}
+
+
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
@@ -729,7 +825,9 @@
int flash_real_protect (flash_info_t * info, long sector, int prot)
{
ulong start;
- int i;
+ int i, j;
+ int curr_bank;
+ int bank;
int rc = 0;
FPWV *addr = (FPWV *) (info->start[sector]);
int flag = disable_interrupts ();
@@ -779,23 +877,54 @@
* we have to restore lock bits of protected sectors.
*/
if (!prot) {
- for (i = 0; i < info->sector_count; i++) {
- if (info->protect[i]) {
- start = get_timer (0);
- addr = (FPWV *) (info->start[i]);
- *addr = INTEL_LOCKBIT; /* Sector lock bit */
- *addr = INTEL_PROTECT; /* set */
- while ((*addr & INTEL_FINISHED) !=
- INTEL_FINISHED) {
- if (get_timer (start) >
- CFG_FLASH_UNLOCK_TOUT) {
- printf ("Flash lock bit operation timed out\n");
- rc = 1;
- break;
+ /*
+ * re-locking must be done for all banks that belong on one
+ * FLASH chip, as all the sectors on the chip were unlocked
+ * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope
+ * that banks never span chips, in particular chips which
+ * support h/w protection differently).
+ */
+
+ /* find the current bank number */
+ curr_bank = CFG_MAX_FLASH_BANKS + 1;
+ for (j = 0; j < CFG_MAX_FLASH_BANKS; ++j) {
+ if (&flash_info[j] == info) {
+ curr_bank = j;
+ }
+ }
+ if (curr_bank == CFG_MAX_FLASH_BANKS + 1) {
+ printf("Error: can't determine bank number!\n");
+ }
+
+ for (bank = 0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
+ if (!same_chip_banks(curr_bank, bank)) {
+ continue;
+ }
+ info = &flash_info[bank];
+ for (i = 0; i < info->sector_count; i++) {
+ if (info->protect[i]) {
+ start = get_timer (0);
+ addr = (FPWV *) (info->start[i]);
+ *addr = INTEL_LOCKBIT; /* Sector lock bit */
+ *addr = INTEL_PROTECT; /* set */
+ while ((*addr & INTEL_FINISHED) !=
+ INTEL_FINISHED) {
+ if (get_timer (start) >
+ CFG_FLASH_UNLOCK_TOUT) {
+ printf ("Flash lock bit operation timed out\n");
+ rc = 1;
+ break;
+ }
}
}
}
}
+
+ /*
+ * get the s/w sector protection status in sync with the h/w,
+ * in case something went wrong during the re-locking.
+ */
+ flash_sync_real_protect(info); /* resets flash to read mode */
}
if (flag)
diff --git a/board/bubinga405ep/Makefile b/board/amcc/bamboo/Makefile
similarity index 95%
copy from board/bubinga405ep/Makefile
copy to board/amcc/bamboo/Makefile
index 97d6a1e..0b97906 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/bamboo/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,7 +25,8 @@
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+OBJS = $(BOARD).o
+#OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
new file mode 100644
index 0000000..7b2d3f4
--- /dev/null
+++ b/board/amcc/bamboo/bamboo.c
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
+
+#if 0 /* test-only */
+ mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+
+ mtebc(pb1ap, 0x00000000);
+ mtebc(pb1cr, 0x00000000);
+
+ mtebc(pb2ap, 0x04814500);
+ /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
+#else
+ mtebc(pb0ap, 0x04055200); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfff18000); /* BAS=0xfe0 1MB r/w 8-bit */
+#endif
+
+ mtebc(pb3ap, 0x00000000);
+ mtebc(pb3cr, 0x00000000);
+
+ mtebc(pb4ap, 0x00000000);
+ mtebc(pb4cr, 0x00000000);
+
+ mtebc(pb5ap, 0x00000000);
+ mtebc(pb5cr, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /*CPLD cs */
+ /*setup Address lines for flash sizes larger than 16Meg. */
+ out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+ /*setup emac */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+ out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+ /*UART1 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+ out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+ /*setup USB 2.0 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+ out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+ /*--------------------------------------------------------------------
+ * Setup other serial configuration
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
+ mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
+ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
+
+#if 0 /* test-only */
+ /*clear tmrclk divisor */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /*enable ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+ /*enable usb 1.1 fs device and remove usb 2.0 reset */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+ /*get rid of flash write protect */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ sys_info_t sysinfo;
+ unsigned char *s = getenv("serial#");
+
+ get_sys_info(&sysinfo);
+
+ printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ return (0);
+}
+
+/*************************************************************************
+ * sdram_init -- doesn't use serial presence detect.
+ *
+ * Assumes: 256 MB, ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_clktr, 0x40000000); /* ?? */
+ mtsdram(mem_wddctr, 0x40000000); /* ?? */
+
+ /*clear this first, if the DDR is enabled by a debugger
+ then you can not make changes. */
+ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+
+ mtsdram(mem_tr0, 0x410a4012); /* ?? */
+ mtsdram(mem_tr1, 0x8080080b); /* ?? */
+ mtsdram(mem_rtr, 0x04080000); /* ?? */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram(mem_cfg0, 0x84000000); /* Enable */
+
+ for (;;) {
+ mfsdram(mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ sdram_init();
+ return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long strap;
+ unsigned long addr;
+
+ /*--------------------------------------------------------------------------+
+ * Bamboo is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 EP PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Bamboo is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/ebony/config.mk b/board/amcc/bamboo/config.mk
similarity index 95%
copy from board/ebony/config.mk
copy to board/amcc/bamboo/config.mk
index 84e3e52..4ab0ea0 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -25,10 +25,10 @@
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
+#TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+TEXT_BASE = 0xFBD00000
else
TEXT_BASE = 0xFFF80000
endif
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
new file mode 100644
index 0000000..7ba43c7
--- /dev/null
+++ b/board/amcc/bamboo/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ /*
+ 0xf0000000 must be first, before relocation SA_I must be off to use the
+ dcache as stack. It is patched after relocation to enable SA_I
+ */
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+ /* USB 2.0 Device */
+ tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+ tlbtab_end
diff --git a/board/ebony/u-boot.lds b/board/amcc/bamboo/u-boot.lds
similarity index 98%
copy from board/ebony/u-boot.lds
copy to board/amcc/bamboo/u-boot.lds
index 7ea7caf..a4016d5 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/bamboo/u-boot.lds
@@ -67,7 +67,7 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ebony/init.o (.text)
+ board/amcc/bamboo/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/bubinga405ep/Makefile b/board/amcc/bubinga/Makefile
similarity index 98%
rename from board/bubinga405ep/Makefile
rename to board/amcc/bubinga/Makefile
index 97d6a1e..f5bda55 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -26,7 +26,6 @@
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
new file mode 100644
index 0000000..b4e9349
--- /dev/null
+++ b/board/amcc/bubinga/bubinga.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+long int spd_sdram(void);
+
+#include <common.h>
+#include <asm/processor.h>
+
+int board_early_init_f(void)
+{
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000010);
+ mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */
+ mtdcr(uictr, 0x00000010); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ unsigned char *s = getenv("serial#");
+
+ puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+/* -------------------------------------------------------------------------
+ initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ the necessary info for SDRAM controller configuration
+ ------------------------------------------------------------------------- */
+long int initdram(int board_type)
+{
+ long int ret;
+
+ ret = spd_sdram();
+ return ret;
+}
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("test: xxx MB - ok\n");
+
+ return (0);
+}
diff --git a/board/bubinga405ep/config.mk b/board/amcc/bubinga/config.mk
similarity index 91%
rename from board/bubinga405ep/config.mk
rename to board/amcc/bubinga/config.mk
index 8426bb3..1bdf5e4 100644
--- a/board/bubinga405ep/config.mk
+++ b/board/amcc/bubinga/config.mk
@@ -21,9 +21,4 @@
# MA 02111-1307 USA
#
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
new file mode 100644
index 0000000..e4832eb
--- /dev/null
+++ b/board/amcc/bubinga/flash.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 =
+ flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ size_b1 = 0;
+ flash_info[0].size = size_b0;
+ }
+
+ /* 2 banks */
+ else {
+ size_b1 =
+ flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+ &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 |
+ (((size_b1 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 |
+ (((size_b0 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets(base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+ /* Also protect sector containing initial power-up instruction */
+ /* (flash_protect() checks address range - other call ignored) */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET,
+ 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 =
+ flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets(base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - 1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ } /* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
diff --git a/board/walnut405/u-boot.lds b/board/amcc/bubinga/u-boot.lds
similarity index 98%
copy from board/walnut405/u-boot.lds
copy to board/amcc/bubinga/u-boot.lds
index 7a75f6a..b8f08ea 100644
--- a/board/walnut405/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,7 +62,6 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/walnut405/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
@@ -125,7 +124,6 @@
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
-
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
new file mode 100644
index 0000000..7311c4e
--- /dev/null
+++ b/board/amcc/common/flash.c
@@ -0,0 +1,555 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+void flash_print_info(flash_info_t * info)
+{
+ int i;
+ int k;
+ int size;
+ int erased;
+ volatile unsigned long *flash;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_STM:
+ printf("STM ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM040:
+ printf("AM29F040 (512 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_AM400B:
+ printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM400T:
+ printf("AM29LV400T (4 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM800B:
+ printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM800T:
+ printf("AM29LV800T (8 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_AM160B:
+ printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T:
+ printf("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B:
+ printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM033C:
+ printf("AM29LV033C (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_SST800A:
+ printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+ break;
+ case FLASH_SST160A:
+ printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ break;
+ }
+
+ printf(" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count - 1))
+ size = info->start[i + 1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff) {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf("\n ");
+ printf(" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ", info->protect[i] ? "RO " : " ");
+ }
+ printf("\n");
+ return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+ DEBUGF("FLASH MANUFACT: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+ info->flash_id = FLASH_MAN_SST;
+ break;
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+
+ DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x0080000; /* => 512 ko */
+ break;
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+ info->flash_id += FLASH_AMDLV033C;
+ info->sector_count = 64;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+ ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+ info->protect[i] = 0;
+ else
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay(1000); /* wait 1 ms */
+ } else {
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7(info, sect);
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf(" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
diff --git a/board/ebony/Makefile b/board/amcc/ebony/Makefile
similarity index 100%
rename from board/ebony/Makefile
rename to board/amcc/ebony/Makefile
diff --git a/board/ebony/config.mk b/board/amcc/ebony/config.mk
similarity index 97%
rename from board/ebony/config.mk
rename to board/amcc/ebony/config.mk
index 84e3e52..e5722dd 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -30,7 +30,7 @@
ifeq ($(ramsym),1)
TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/ebony/ebony.c b/board/amcc/ebony/ebony.c
similarity index 60%
rename from board/ebony/ebony.c
rename to board/amcc/ebony/ebony.c
index a5b3fb6..f6bb837 100644
--- a/board/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -20,9 +20,7 @@
* MA 02111-1307 USA
*/
-
#include <common.h>
-#include "ebony.h"
#include <asm/processor.h>
#include <spd_sdram.h>
@@ -30,99 +28,102 @@
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
-long int fixed_sdram (void);
+long int fixed_sdram(void);
-int board_early_init_f (void)
+int board_early_init_f(void)
{
uint reg;
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
unsigned char status;
-
/*--------------------------------------------------------------------
* Setup the external bus controller/chip selects
*-------------------------------------------------------------------*/
- mtdcr (ebccfga, xbcfg);
- reg = mfdcr (ebccfgd);
- mtdcr (ebccfgd, reg | 0x04000000); /* Set ATC */
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc (pb1ap, 0x02815480); /* NVRAM/RTC */
- mtebc (pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
- mtebc (pb7ap, 0x01015280); /* FPGA registers */
- mtebc (pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
+ mtebc(pb1ap, 0x02815480); /* NVRAM/RTC */
+ mtebc(pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
+ mtebc(pb7ap, 0x01015280); /* FPGA registers */
+ mtebc(pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
/* read FPGA_REG0 and set the bus controller */
status = *fpga_base;
if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
- mtebc (pb0ap, 0x9b015480); /* FLASH/SRAM */
- mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
- mtebc (pb2ap, 0x9b015480); /* 4MB FLASH */
- mtebc (pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
+ mtebc(pb0ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
+ mtebc(pb2ap, 0x9b015480); /* 4MB FLASH */
+ mtebc(pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
} else {
- mtebc (pb0ap, 0x9b015480); /* 4MB FLASH */
- mtebc (pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
+ mtebc(pb0ap, 0x9b015480); /* 4MB FLASH */
+ mtebc(pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
/* set CS2 if FLASH_ONBD_N == 0 */
if (!(status & FLASH_ONBD_N)) {
- mtebc (pb2ap, 0x9b015480); /* FLASH/SRAM */
- mtebc (pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
+ mtebc(pb2ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc(pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
}
}
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr (uic0sr, 0xffffffff); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000000); /* all non-critical */
- mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
return 0;
}
-
-int checkboard (void)
+int checkboard(void)
{
sys_info_t sysinfo;
+ unsigned char *s = getenv("serial#");
- get_sys_info (&sysinfo);
+ get_sys_info(&sysinfo);
- printf ("Board: IBM 440GP Evaluation Board (Ebony)\n");
- printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
- printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
- printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
- printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
- printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
return (0);
}
-
-long int initdram (int board_type)
+long int initdram(int board_type)
{
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
+ dram_size = spd_sdram(0);
#else
- dram_size = fixed_sdram ();
+ dram_size = fixed_sdram();
#endif
return dram_size;
}
-
#if defined(CFG_DRAM_TEST)
-int testdram (void)
+int testdram(void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
@@ -133,7 +134,7 @@
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
+ printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
@@ -143,7 +144,7 @@
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
+ printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
@@ -159,18 +160,18 @@
* PLB @ 133 MHz
*
************************************************************************/
-long int fixed_sdram (void)
+long int fixed_sdram(void)
{
uint reg;
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
@@ -178,28 +179,27 @@
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
- udelay (400); /* Delay 200 usecs (min) */
+ mtsdram(mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram(mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
for (;;) {
- mfsdram (mem_mcsts, reg);
+ mfsdram(mem_mcsts, reg);
if (reg & 0x80000000)
break;
}
return (128 * 1024 * 1024); /* 128 MB */
}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
+#endif /* !defined(CONFIG_SPD_EEPROM) */
/*************************************************************************
* pci_pre_init
@@ -214,23 +214,23 @@
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller * hose )
+int pci_pre_init(struct pci_controller *hose)
{
- unsigned long strap;
+ unsigned long strap;
/*--------------------------------------------------------------------------+
* The ebony board is always configured as the host & requires the
* PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
- strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00100000) == 0 ){
- printf("PCI: CPC0_STRP1[PAE] not set.\n");
- return 0;
- }
+ strap = mfdcr(cpc0_strp1);
+ if ((strap & 0x00100000) == 0) {
+ printf("PCI: CPC0_STRP1[PAE] not set.\n");
+ return 0;
+ }
- return 1;
+ return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
/*************************************************************************
* pci_target_init
@@ -241,38 +241,37 @@
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
+void pci_target_init(struct pci_controller *hose)
{
DECLARE_GLOBAL_DATA_PTR;
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0SA, 0 ); /* disable */
- out32r( PCIX0_PIM1SA, 0 ); /* disable */
- out32r( PCIX0_PIM2SA, 0 ); /* disable */
- out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+ out32r(PCIX0_PIM0SA, 0); /* disable */
+ out32r(PCIX0_PIM1SA, 0); /* disable */
+ out32r(PCIX0_PIM2SA, 0); /* disable */
+ out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
/*--------------------------------------------------------------------------+
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
- out32r( PCIX0_PIM0LAH, 0 );
- out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+ out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out32r(PCIX0_PIM0LAH, 0);
+ out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out32r( PCIX0_BAR0, 0 );
+ out32r(PCIX0_BAR0, 0);
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+ out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+ out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
/*************************************************************************
* is_pci_host
@@ -292,7 +291,7 @@
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
- /* The ebony board is always configured as host. */
- return(1);
+ /* The ebony board is always configured as host. */
+ return (1);
}
-#endif /* defined(CONFIG_PCI) */
+#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
new file mode 100644
index 0000000..e8fbbc4
--- /dev/null
+++ b/board/amcc/ebony/flash.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
+ {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
+ {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
+ {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
+ {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned short index = 0;
+ int i;
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ /* check the bitmap of switch status */
+ if (switch_status & BOOT_SMALL_FLASH) {
+ index += BOOT_SMALL_FLASH_VAL;
+ }
+ if (switch_status & FLASH_ONBD_N) {
+ index += FLASH_ONBD_N_VAL;
+ }
+ if (switch_status & FLASH_SRAM_SEL) {
+ index += FLASH_SRAM_SEL_VAL;
+ }
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *)
+ flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[2]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/ebony/init.S b/board/amcc/ebony/init.S
similarity index 100%
rename from board/ebony/init.S
rename to board/amcc/ebony/init.S
diff --git a/board/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
similarity index 98%
copy from board/ebony/u-boot.lds
copy to board/amcc/ebony/u-boot.lds
index 7ea7caf..0ec3fad 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -67,7 +67,7 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ebony/init.o (.text)
+ board/amcc/ebony/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/ocotea/Makefile b/board/amcc/ocotea/Makefile
similarity index 100%
rename from board/ocotea/Makefile
rename to board/amcc/ocotea/Makefile
diff --git a/board/ocotea/config.mk b/board/amcc/ocotea/config.mk
similarity index 100%
rename from board/ocotea/config.mk
rename to board/amcc/ocotea/config.mk
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
new file mode 100644
index 0000000..5614e20
--- /dev/null
+++ b/board/amcc/ocotea/flash.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
+ {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
+ {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
+ {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
+ {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned short index = 0;
+ int i;
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ /* check the bitmap of switch status */
+ if (switch_status & BOOT_SMALL_FLASH) {
+ index += BOOT_SMALL_FLASH_VAL;
+ }
+ if (switch_status & FLASH_ONBD_N) {
+ index += FLASH_ONBD_N_VAL;
+ }
+ if (switch_status & FLASH_SRAM_SEL) {
+ index += FLASH_SRAM_SEL_VAL;
+ }
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] =
+ flash_get_size((vu_long *) flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf
+ ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[i]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/ocotea/init.S b/board/amcc/ocotea/init.S
similarity index 100%
rename from board/ocotea/init.S
rename to board/amcc/ocotea/init.S
diff --git a/board/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
similarity index 98%
rename from board/ocotea/ocotea.c
rename to board/amcc/ocotea/ocotea.c
index 1c532a3..5f436ea 100644
--- a/board/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -1,6 +1,9 @@
/*
* Copyright (C) 2004 PaulReynolds@lhsolutions.com
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -184,10 +187,17 @@
int checkboard (void)
{
sys_info_t sysinfo;
+ unsigned char *s = getenv ("serial#");
get_sys_info (&sysinfo);
+ printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
- printf ("Board: IBM 440GX Evaluation Board\n");
printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
diff --git a/board/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
similarity index 100%
rename from board/ocotea/ocotea.h
rename to board/amcc/ocotea/ocotea.h
diff --git a/board/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
similarity index 98%
rename from board/ocotea/u-boot.lds
rename to board/amcc/ocotea/u-boot.lds
index 8a54617..a985246 100644
--- a/board/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -67,7 +67,7 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ocotea/init.o (.text)
+ board/amcc/ocotea/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/bubinga405ep/Makefile b/board/amcc/walnut/Makefile
similarity index 98%
copy from board/bubinga405ep/Makefile
copy to board/amcc/walnut/Makefile
index 97d6a1e..f5bda55 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -26,7 +26,6 @@
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/bubinga405ep/config.mk b/board/amcc/walnut/config.mk
similarity index 91%
copy from board/bubinga405ep/config.mk
copy to board/amcc/walnut/config.mk
index 8426bb3..1bdf5e4 100644
--- a/board/bubinga405ep/config.mk
+++ b/board/amcc/walnut/config.mk
@@ -21,9 +21,4 @@
# MA 02111-1307 USA
#
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
new file mode 100644
index 0000000..056f9b9
--- /dev/null
+++ b/board/amcc/walnut/flash.c
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 =
+ flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ size_b1 = 0;
+ flash_info[0].size = size_b0;
+ } else {
+ /* 2 banks */
+ size_b1 =
+ flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+ &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr =
+ (pbcr & 0x0001ffff) | base_b1 |
+ (((size_b1 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr =
+ (pbcr & 0x0001ffff) | base_b0 |
+ (((size_b0 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets(base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0 + size_b0 - monitor_flash_len,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 =
+ flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets(base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1 + size_b1 -
+ monitor_flash_len,
+ base_b1 + size_b1 - 1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 -
+ monitor_flash_len,
+ base_b0 + size_b0 - 1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ } /* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
diff --git a/board/walnut405/u-boot.lds b/board/amcc/walnut/u-boot.lds
similarity index 98%
rename from board/walnut405/u-boot.lds
rename to board/amcc/walnut/u-boot.lds
index 7a75f6a..7107880 100644
--- a/board/walnut405/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,7 +62,6 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/walnut405/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
new file mode 100644
index 0000000..9fca0a6
--- /dev/null
+++ b/board/amcc/walnut/walnut.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the Walnut/Sycamore board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED
+ | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+ | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+ | IRQ 27 (EXT IRQ 2) Not Used
+ | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+ | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+ | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+ | Note for Walnut board:
+ | An interrupt taken for the FPGA (IRQ 25) indicates that either
+ | the Mouse, Keyboard, IRDA, or External Expansion caused the
+ | interrupt. The FPGA must be read to determine which device
+ | caused the interrupt. The default setting of the FPGA clears
+ |
+ +-------------------------------------------------------------------------*/
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC 0xF0300004
+ *(volatile char *)(FPGA_BRDC) |= 0x1;
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ unsigned char *s = getenv("serial#");
+ uint pvr = get_pvr();
+
+ if (pvr == PVR_405GPR_RB) {
+ puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+ } else {
+ puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
+ }
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+/*
+ * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ * the necessary info for SDRAM controller configuration
+ */
+long int initdram(int board_type)
+{
+ return spd_sdram(0);
+}
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("test: xxx MB - ok\n");
+
+ return (0);
+}
diff --git a/board/bubinga405ep/Makefile b/board/amcc/yellowstone/Makefile
similarity index 95%
copy from board/bubinga405ep/Makefile
copy to board/amcc/yellowstone/Makefile
index 97d6a1e..5654f91 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/yellowstone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,7 +25,8 @@
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+OBJS = $(BOARD).o
+OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/ebony/config.mk b/board/amcc/yellowstone/config.mk
similarity index 95%
copy from board/ebony/config.mk
copy to board/amcc/yellowstone/config.mk
index 84e3e52..4ab0ea0 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/yellowstone/config.mk
@@ -25,10 +25,10 @@
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
+#TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+TEXT_BASE = 0xFBD00000
else
TEXT_BASE = 0xFFF80000
endif
diff --git a/board/ocotea/flash.c b/board/amcc/yellowstone/flash.c
similarity index 60%
copy from board/ocotea/flash.c
copy to board/amcc/yellowstone/flash.c
index bc0d2c9..99fcfb5 100644
--- a/board/ocotea/flash.c
+++ b/board/amcc/yellowstone/flash.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2004-2005
+ * (C) Copyright 2002-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
@@ -15,7 +15,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -31,40 +31,35 @@
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
+/*
+ * Ported to XPedite1000, 1/2 mb boot flash only
+ * Travis B. Sawyer, <travis.sawyer@sandburst.com>
+ */
+
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#undef DEBUG
-
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
-#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
+ {0xfe000000}
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
- {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
- {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
- {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
- {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
- {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
- {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
- {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
- {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
};
/*-----------------------------------------------------------------------
@@ -73,12 +68,9 @@
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-#ifdef CONFIG_OCOTEA
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
+#define ADDR0 0xaaaa
+#define ADDR1 0x5554
+#define FLASH_WORD_SIZE unsigned short
/*-----------------------------------------------------------------------
*/
@@ -87,25 +79,9 @@
{
unsigned long total_b = 0;
unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
- unsigned char switch_status;
unsigned short index = 0;
int i;
- /* read FPGA base register FPGA_REG0 */
- switch_status = *fpga_base;
-
- /* check the bitmap of switch status */
- if (switch_status & BOOT_SMALL_FLASH) {
- index += BOOT_SMALL_FLASH_VAL;
- }
- if (switch_status & FLASH_ONBD_N) {
- index += FLASH_ONBD_N_VAL;
- }
- if (switch_status & FLASH_SRAM_SEL) {
- index += FLASH_SRAM_SEL_VAL;
- }
-
DEBUGF("\n");
DEBUGF("FLASH: Index: %d\n", index);
@@ -121,11 +97,14 @@
}
/* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
+ size_b[i] = flash_get_size((vu_long *)
+ flash_addr_table[index][i],
+ &flash_info[i]);
flash_info[i].size = size_b[i];
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i] << 20);
+ printf
+ ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}
@@ -133,11 +112,9 @@
total_b += flash_info[i].size;
}
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
- 0xffffffff,
- &flash_info[2]);
+ /* FLASH protect Monitor */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
return total_b;
}
@@ -161,9 +138,6 @@
case FLASH_MAN_AMD:
printf("AMD ");
break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
case FLASH_MAN_FUJ:
printf("FUJITSU ");
break;
@@ -176,6 +150,9 @@
}
switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
case FLASH_AM040:
printf("AM29F040 (512 Kbit, uniform sector size)\n");
break;
@@ -203,9 +180,6 @@
case FLASH_AM320T:
printf("AM29LV320T (32 Mbit, top boot sector)\n");
break;
- case FLASH_AMDLV033C:
- printf("AM29LV033C (32 Mbit, top boot sector)\n");
- break;
case FLASH_SST800A:
printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
break;
@@ -230,7 +204,7 @@
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
- flash = (volatile unsigned long *) info->start[i];
+ flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k = 0; k < size; k++) {
if (*flash++ != 0xffffffff) {
@@ -252,6 +226,9 @@
/*-----------------------------------------------------------------------
*/
+/*-----------------------------------------------------------------------
+ */
+
/*
* The following code cannot be run from FLASH!
*/
@@ -262,18 +239,19 @@
ulong base = (ulong) addr;
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
- DEBUGF("FLASH ADDR: %08x\n", (unsigned) addr);
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
udelay(1000);
value = addr2[0];
+
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
@@ -293,96 +271,29 @@
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- return (0); /* no or unknown flash */
+ return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+#ifdef CONFIG_ADCIOP
+ value = addr2[0]; /* device ID */
+ debug("\ndev_code=%x\n", value);
+#else
+ value = addr2[1]; /* device ID */
+#endif
DEBUGF("\nFLASH DEVICEID: %x\n", value);
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) STM_ID_M29W040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_LV033C:
- info->flash_id += FLASH_AMDLV033C;
- info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
+ info->flash_id = 0;
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ info->size = 0x02000000;
/* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
- ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-
- /* For AMD29033C flash we need to resend the command of *
- * reading flash protection for upper 8 Mb of flash */
- if ( i == 32 ) {
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
+ info->start[i] = (int)base + (i * 0x00020000);
+ info->protect[i] = 0;
}
- /* issue bank reset to return to read mode */
- addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- /* ? ? ? */
- }
+ *(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0; /* reset bank */
return (info->size);
}
@@ -391,7 +302,7 @@
{
ulong start, now, last;
volatile FLASH_WORD_SIZE *addr =
- (FLASH_WORD_SIZE *) (info->start[sect]);
+ (FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
@@ -457,24 +368,31 @@
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+ printf("Erasing sector %p\n", addr2);
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x0080;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ asm("sync");
+ asm("isync");
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- for (i = 0; i < 50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- }
l_sect = sect;
/*
* Wait for each sector to complete, it's more
@@ -494,6 +412,16 @@
/* wait at least 80us - let's wait 1 ms */
udelay(1000);
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+ DONE:
+#endif
/* reset to read mode */
addr = (FLASH_WORD_SIZE *) info->start[0];
addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
@@ -512,36 +440,45 @@
{
ulong cp, wp, data;
int i, l, rc;
+ ulong status_value = 0;
- wp = (addr & ~3); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
+
+ /*print status if needed */
+ if ((wp >= (status_value + 0x20000))
+ && (status_value < 0xFFFE0000)) {
+ status_value = wp;
+ printf("writing to sector 0x%X\n", status_value);
+ }
+
data = 0;
for (i = 0; i < 4; ++i) {
data = (data << 8) | *src++;
@@ -580,14 +517,14 @@
*/
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile vu_long *addr2 = (vu_long *) (info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
ulong start;
int i;
/* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ if ((*((volatile FLASH_WORD_SIZE *)dest) &
(FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
return (2);
}
@@ -598,9 +535,18 @@
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00A0;
+ asm("sync");
+ asm("isync");
dest2[i] = data2[i];
@@ -621,3 +567,6 @@
return (0);
}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S
new file mode 100644
index 0000000..7ba43c7
--- /dev/null
+++ b/board/amcc/yellowstone/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ /*
+ 0xf0000000 must be first, before relocation SA_I must be off to use the
+ dcache as stack. It is patched after relocation to enable SA_I
+ */
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+ /* USB 2.0 Device */
+ tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+ tlbtab_end
diff --git a/board/ebony/u-boot.lds b/board/amcc/yellowstone/u-boot.lds
similarity index 98%
copy from board/ebony/u-boot.lds
copy to board/amcc/yellowstone/u-boot.lds
index 7ea7caf..769eed3 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/yellowstone/u-boot.lds
@@ -67,7 +67,7 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ebony/init.o (.text)
+ board/amcc/yellowstone/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
new file mode 100644
index 0000000..840a46c
--- /dev/null
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -0,0 +1,426 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
+
+ mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+
+ mtebc(pb1ap, 0x00000000);
+ mtebc(pb1cr, 0x00000000);
+
+ mtebc(pb2ap, 0x04814500);
+ /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
+
+ mtebc(pb3ap, 0x00000000);
+ mtebc(pb3cr, 0x00000000);
+
+ mtebc(pb4ap, 0x00000000);
+ mtebc(pb4cr, 0x00000000);
+
+ mtebc(pb5ap, 0x00000000);
+ mtebc(pb5cr, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /*CPLD cs */
+ /*setup Address lines for flash sizes larger than 16Meg. */
+ out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+ /*setup emac */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+ out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+ /*UART1 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+ out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+ /*setup USB 2.0 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+ out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+ /*--------------------------------------------------------------------
+ * Setup other serial configuration
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
+ mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
+ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
+
+ /*clear tmrclk divisor */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /*enable ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+ /*enable usb 1.1 fs device and remove usb 2.0 reset */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+ /*get rid of flash write protect */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+
+ printf("Board: AMCC YELLOWSTONE\n");
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+ return (0);
+}
+
+/*************************************************************************
+ * sdram_init -- doesn't use serial presence detect.
+ *
+ * Assumes: 256 MB, ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_clktr, 0x40000000); /* ?? */
+ mtsdram(mem_wddctr, 0x40000000); /* ?? */
+
+ /*clear this first, if the DDR is enabled by a debugger
+ then you can not make changes. */
+ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+ mtsdram(mem_tr0, 0x410a4012); /* ?? */
+ mtsdram(mem_tr1, 0x8080080b); /* ?? */
+ mtsdram(mem_rtr, 0x04080000); /* ?? */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram(mem_cfg0, 0x84000000); /* Enable */
+
+ for (;;) {
+ mfsdram(mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ sdram_init();
+ return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long strap;
+ unsigned long addr;
+
+ /*--------------------------------------------------------------------------+
+ * Bamboo is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ u16 cmdstat;
+
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 EP PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Bamboo is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+}
+#endif
diff --git a/board/bubinga405ep/Makefile b/board/amcc/yosemite/Makefile
similarity index 95%
copy from board/bubinga405ep/Makefile
copy to board/amcc/yosemite/Makefile
index 97d6a1e..5654f91 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/yosemite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,7 +25,8 @@
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+OBJS = $(BOARD).o
+OBJS += flash.o
SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
diff --git a/board/ebony/config.mk b/board/amcc/yosemite/config.mk
similarity index 95%
copy from board/ebony/config.mk
copy to board/amcc/yosemite/config.mk
index 84e3e52..4ab0ea0 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/yosemite/config.mk
@@ -25,10 +25,10 @@
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
+#TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+TEXT_BASE = 0xFBD00000
else
TEXT_BASE = 0xFFF80000
endif
diff --git a/board/ocotea/flash.c b/board/amcc/yosemite/flash.c
similarity index 60%
rename from board/ocotea/flash.c
rename to board/amcc/yosemite/flash.c
index bc0d2c9..cd6a2e6 100644
--- a/board/ocotea/flash.c
+++ b/board/amcc/yosemite/flash.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2004-2005
+ * (C) Copyright 2002-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
@@ -15,7 +15,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -31,40 +31,35 @@
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
+/*
+ * Ported to XPedite1000, 1/2 mb boot flash only
+ * Travis B. Sawyer, <travis.sawyer@sandburst.com>
+ */
+
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#undef DEBUG
-
#ifdef DEBUG
#define DEBUGF(x...) printf(x)
#else
#define DEBUGF(x...)
#endif /* DEBUG */
-#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+unsigned long flash_addr_table[512][CFG_MAX_FLASH_BANKS] = {
+ {0xfe000000}
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
- {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
- {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
- {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
- {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
- {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
- {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
- {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
- {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
};
/*-----------------------------------------------------------------------
@@ -73,12 +68,9 @@
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-#ifdef CONFIG_OCOTEA
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
+#define ADDR0 0xaaaa
+#define ADDR1 0x5554
+#define FLASH_WORD_SIZE unsigned short
/*-----------------------------------------------------------------------
*/
@@ -87,25 +79,9 @@
{
unsigned long total_b = 0;
unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
- unsigned char switch_status;
unsigned short index = 0;
int i;
- /* read FPGA base register FPGA_REG0 */
- switch_status = *fpga_base;
-
- /* check the bitmap of switch status */
- if (switch_status & BOOT_SMALL_FLASH) {
- index += BOOT_SMALL_FLASH_VAL;
- }
- if (switch_status & FLASH_ONBD_N) {
- index += FLASH_ONBD_N_VAL;
- }
- if (switch_status & FLASH_SRAM_SEL) {
- index += FLASH_SRAM_SEL_VAL;
- }
-
DEBUGF("\n");
DEBUGF("FLASH: Index: %d\n", index);
@@ -121,11 +97,14 @@
}
/* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
+ size_b[i] = flash_get_size((vu_long *)
+ flash_addr_table[index][i],
+ &flash_info[i]);
flash_info[i].size = size_b[i];
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i] << 20);
+ printf
+ ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}
@@ -133,11 +112,9 @@
total_b += flash_info[i].size;
}
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
- 0xffffffff,
- &flash_info[2]);
+ /* FLASH protect Monitor */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE, 0xFFFFFFFF, &flash_info[0]);
return total_b;
}
@@ -161,9 +138,6 @@
case FLASH_MAN_AMD:
printf("AMD ");
break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
case FLASH_MAN_FUJ:
printf("FUJITSU ");
break;
@@ -176,6 +150,9 @@
}
switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
case FLASH_AM040:
printf("AM29F040 (512 Kbit, uniform sector size)\n");
break;
@@ -203,9 +180,6 @@
case FLASH_AM320T:
printf("AM29LV320T (32 Mbit, top boot sector)\n");
break;
- case FLASH_AMDLV033C:
- printf("AM29LV033C (32 Mbit, top boot sector)\n");
- break;
case FLASH_SST800A:
printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
break;
@@ -230,7 +204,7 @@
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
- flash = (volatile unsigned long *) info->start[i];
+ flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k = 0; k < size; k++) {
if (*flash++ != 0xffffffff) {
@@ -252,6 +226,9 @@
/*-----------------------------------------------------------------------
*/
+/*-----------------------------------------------------------------------
+ */
+
/*
* The following code cannot be run from FLASH!
*/
@@ -262,18 +239,19 @@
ulong base = (ulong) addr;
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
- DEBUGF("FLASH ADDR: %08x\n", (unsigned) addr);
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x00AA;
udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) = (FLASH_WORD_SIZE) 0x0055;
udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) = (FLASH_WORD_SIZE) 0x0090;
udelay(1000);
value = addr2[0];
+
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
@@ -293,96 +271,29 @@
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- return (0); /* no or unknown flash */
+ return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+#ifdef CONFIG_ADCIOP
+ value = addr2[0]; /* device ID */
+ debug("\ndev_code=%x\n", value);
+#else
+ value = addr2[1]; /* device ID */
+#endif
DEBUGF("\nFLASH DEVICEID: %x\n", value);
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) STM_ID_M29W040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_LV033C:
- info->flash_id += FLASH_AMDLV033C;
- info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
- }
+ info->flash_id = 0;
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ info->size = 0x02000000;
/* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
- ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-
- /* For AMD29033C flash we need to resend the command of *
- * reading flash protection for upper 8 Mb of flash */
- if ( i == 32 ) {
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
+ info->start[i] = (int)base + (i * 0x00020000);
+ info->protect[i] = 0;
}
- /* issue bank reset to return to read mode */
- addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- /* ? ? ? */
- }
+ *(FLASH_WORD_SIZE *) ((int)addr) = (FLASH_WORD_SIZE) 0x00F0; /* reset bank */
return (info->size);
}
@@ -391,7 +302,7 @@
{
ulong start, now, last;
volatile FLASH_WORD_SIZE *addr =
- (FLASH_WORD_SIZE *) (info->start[sect]);
+ (FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
@@ -418,7 +329,6 @@
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
volatile FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
- int i;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
@@ -457,24 +367,31 @@
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+ printf("Erasing sector %p\n", addr2);
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x0080;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ asm("sync");
+ asm("isync");
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- for (i = 0; i < 50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- }
l_sect = sect;
/*
* Wait for each sector to complete, it's more
@@ -494,6 +411,16 @@
/* wait at least 80us - let's wait 1 ms */
udelay(1000);
+#if 0
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+ wait_for_DQ7(info, l_sect);
+
+ DONE:
+#endif
/* reset to read mode */
addr = (FLASH_WORD_SIZE *) info->start[0];
addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
@@ -512,36 +439,45 @@
{
ulong cp, wp, data;
int i, l, rc;
+ ulong status_value = 0;
- wp = (addr & ~3); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
+
+ /*print status if needed */
+ if ((wp >= (status_value + 0x20000))
+ && (status_value < 0xFFFE0000)) {
+ status_value = wp;
+ printf("writing to sector 0x%X\n", status_value);
+ }
+
data = 0;
for (i = 0; i < 4; ++i) {
data = (data << 8) | *src++;
@@ -580,14 +516,14 @@
*/
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+ vu_long *addr2 = (vu_long *) (info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
ulong start;
int i;
/* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ if ((*((volatile FLASH_WORD_SIZE *)dest) &
(FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
return (2);
}
@@ -598,9 +534,18 @@
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00AA;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR1) =
+ (FLASH_WORD_SIZE) 0x0055;
+ asm("sync");
+ asm("isync");
+ *(FLASH_WORD_SIZE *) ((int)addr2 + ADDR0) =
+ (FLASH_WORD_SIZE) 0x00A0;
+ asm("sync");
+ asm("isync");
dest2[i] = data2[i];
@@ -621,3 +566,6 @@
return (0);
}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S
new file mode 100644
index 0000000..7ba43c7
--- /dev/null
+++ b/board/amcc/yosemite/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ /*
+ 0xf0000000 must be first, before relocation SA_I must be off to use the
+ dcache as stack. It is patched after relocation to enable SA_I
+ */
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+ /* USB 2.0 Device */
+ tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+ tlbtab_end
diff --git a/board/ebony/u-boot.lds b/board/amcc/yosemite/u-boot.lds
similarity index 98%
rename from board/ebony/u-boot.lds
rename to board/amcc/yosemite/u-boot.lds
index 7ea7caf..62dc988 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/yosemite/u-boot.lds
@@ -67,7 +67,7 @@
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ebony/init.o (.text)
+ board/amcc/yosemite/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
new file mode 100644
index 0000000..6c8a883
--- /dev/null
+++ b/board/amcc/yosemite/yosemite.c
@@ -0,0 +1,424 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
+
+ mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+
+ mtebc(pb1ap, 0x00000000);
+ mtebc(pb1cr, 0x00000000);
+
+ mtebc(pb2ap, 0x04814500);
+ /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
+
+ mtebc(pb3ap, 0x00000000);
+ mtebc(pb3cr, 0x00000000);
+
+ mtebc(pb4ap, 0x00000000);
+ mtebc(pb4cr, 0x00000000);
+
+ mtebc(pb5ap, 0x00000000);
+ mtebc(pb5cr, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /*CPLD cs */
+ /*setup Address lines for flash sizes larger than 16Meg. */
+ out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+ /*setup emac */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+ out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+ /*UART1 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+ out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+ /*setup USB 2.0 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+ out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+ /*--------------------------------------------------------------------
+ * Setup other serial configuration
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
+ mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
+ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
+
+ /*clear tmrclk divisor */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /*enable ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+ /*enable usb 1.1 fs device and remove usb 2.0 reset */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+ /*get rid of flash write protect */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+
+ printf("Board: AMCC YOSEMITE\n");
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+ return (0);
+}
+
+/*************************************************************************
+ * sdram_init -- doesn't use serial presence detect.
+ *
+ * Assumes: 256 MB, ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_clktr, 0x40000000); /* ?? */
+ mtsdram(mem_wddctr, 0x40000000); /* ?? */
+
+ /*clear this first, if the DDR is enabled by a debugger
+ then you can not make changes. */
+ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+
+ mtsdram(mem_tr0, 0x410a4012); /* ?? */
+ mtsdram(mem_tr1, 0x8080080b); /* ?? */
+ mtsdram(mem_rtr, 0x04080000); /* ?? */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram(mem_cfg0, 0x84000000); /* Enable */
+
+ for (;;) {
+ mfsdram(mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ sdram_init();
+ return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long strap;
+ unsigned long addr;
+
+ /*--------------------------------------------------------------------------+
+ * Bamboo is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 EP PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Bamboo is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c
deleted file mode 100644
index 0be7965..0000000
--- a/board/bubinga405ep/bubinga405ep.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-long int spd_sdram (void);
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-int board_early_init_f (void)
-{
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000010);
- mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */
- mtdcr (uictr, 0x00000010); /* set int trigger levels */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
-
-#if 0
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
- /* CS1 */
- /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb1ap, 0x02815480);
- mtebc (pb1cr, 0xF0018000);
-
- p = (unsigned int*)0xEF600708;
- t = *p;
- t = t | 0x00000400;
- *p = t;
-
- /* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb2ap, 0x04815A80);
- mtebc (pb2cr, 0xF0118000);
-
- /* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb3ap, 0x01815280);
- mtebc (pb3cr, 0xF0218000);
-
- /* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb7ap, 0x01815280);
- mtebc (pb7cr, 0xF0318000);
-
-
- /* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC 0xF0300004
- *(volatile char *) (FPGA_BRDC) |= 0x1;
-
-#endif
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- unsigned char *s = getenv ("serial#");
-
- puts ("Board: IBM 405EP Eval Board");
-
- if (s != NULL) {
- puts (", serial# ");
- puts (s);
- }
- putc ('\n');
-
- return (0);
-}
-
-
-/* -------------------------------------------------------------------------
- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- the necessary info for SDRAM controller configuration
- ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
- long int ret;
-
- ret = spd_sdram ();
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/bubinga405ep/bubinga405ep.h b/board/bubinga405ep/bubinga405ep.h
deleted file mode 100644
index 5fc313a..0000000
--- a/board/bubinga405ep/bubinga405ep.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
diff --git a/board/bubinga405ep/flash.c b/board/bubinga405ep/flash.c
deleted file mode 100644
index 85179d0..0000000
--- a/board/bubinga405ep/flash.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_BUBINGA405EP
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
- uint pbcr;
- unsigned long base_b0, base_b1;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 << 20);
- }
-
- /* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1) {
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM + CFG_MONITOR_LEN - 1,
- &flash_info[0]);
- /* Also protect sector containing initial power-up instruction */
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
- size_b1 = 0;
- flash_info[0].size = size_b0;
- }
-
- /* 2 banks */
- else {
- size_b1 = flash_get_size ((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1]);
-
- /* Re-do sizing to get full correct info */
-
- if (size_b1) {
- mtdcr (ebccfga, pb0cr);
- pbcr = mfdcr (ebccfgd);
- mtdcr (ebccfga, pb0cr);
- base_b1 = -size_b1;
- pbcr = (pbcr & 0x0001ffff) | base_b1 |
- (((size_b1 / 1024 / 1024) - 1) << 17);
- mtdcr (ebccfgd, pbcr);
- /* printf("pb1cr = %x\n", pbcr); */
- }
-
- if (size_b0) {
- mtdcr (ebccfga, pb1cr);
- pbcr = mfdcr (ebccfgd);
- mtdcr (ebccfga, pb1cr);
- base_b0 = base_b1 - size_b0;
- pbcr = (pbcr & 0x0001ffff) | base_b0 |
- (((size_b0 / 1024 / 1024) - 1) << 17);
- mtdcr (ebccfgd, pbcr);
- /* printf("pb0cr = %x\n", pbcr); */
- }
-
- size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
- flash_get_offsets (base_b0, &flash_info[0]);
-
- /* monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
- base_b0 + size_b0 - 1, &flash_info[0]);
- /* Also protect sector containing initial power-up instruction */
- /* (flash_protect() checks address range - other call ignored) */
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
-
- if (size_b1) {
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
- flash_get_offsets (base_b1, &flash_info[1]);
-
- /* monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- base_b1 + size_b1 - CFG_MONITOR_LEN,
- base_b1 + size_b1 - 1,
- &flash_info[1]);
- /* monitor protection OFF by default (one is enough) */
- (void) flash_protect (FLAG_PROTECT_CLEAR,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
- base_b0 + size_b0 - 1,
- &flash_info[0]);
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- } /* else 2 banks */
- return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *) info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-#if 0 /* test-only */
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " "
-#else
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ", info->protect[i] ? "RO " : " "
-#endif
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- /* printf("\ndev_code=%x\n", value); */
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE) AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE) SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *) info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7 (flash_info_t * info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[sect]);
-
- start = get_timer (0);
- last = 0;
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- printf ("Erasing sector %p\n", addr2); /* CLH */
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- for (i = 0; i < 50; i++)
- udelay (1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7 (info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7 (info, l_sect);
-
- DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/bubinga405ep/init.S b/board/bubinga405ep/init.S
deleted file mode 100644
index e478525..0000000
--- a/board/bubinga405ep/init.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function: ext_bus_cntlr_init */
-/* Description: Initializes the External Bus Controller for the external */
-/* peripherals. IMPORTANT: For pass1 this code must run from */
-/* cache since you can not reliably change a peripheral banks */
-/* timing register (pbxap) while running code from that bank. */
-/* For ex., since we are running from ROM on bank 0, we can NOT */
-/* execute the code that modifies bank 0 timings from ROM, so */
-/* we run it from cache. */
-/* Bank 0 - Flash and SRAM */
-/* Bank 1 - NVRAM/RTC */
-/* Bank 2 - Keyboard/Mouse controller */
-/* Bank 3 - IR controller */
-/* Bank 4 - not used */
-/* Bank 5 - not used */
-/* Bank 6 - not used */
-/* Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-/*----------------------------------------------------------------------------- */
-/* Function: sdram_init */
-/* Description: Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
- .globl sdram_init
-sdram_init:
- blr
diff --git a/board/bubinga405ep/u-boot.lds b/board/bubinga405ep/u-boot.lds
deleted file mode 100644
index 3894614..0000000
--- a/board/bubinga405ep/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- .resetvec 0xFFFFFFFC :
- {
- *(.resetvec)
- } = 0xffff
-
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/ppc4xx/start.o (.text)
- board/bubinga405ep/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- cpu/ppc4xx/405gp_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* . = env_offset;*/
-/* common/environment.o(.text)*/
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/bubinga405ep/u-boot.lds.debug b/board/bubinga405ep/u-boot.lds.debug
deleted file mode 100644
index df50b7d..0000000
--- a/board/bubinga405ep/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
-/*
- cpu/ppc4xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
-*/
- cpu/ppc4xx/start.o (.text)
- board/bubinga405ep/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- cpu/ppc4xx/405gp_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 0bd43bd..1f6512d 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -261,7 +261,7 @@
debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE);
totlen += nand_probe (CFG_NAND1_BASE);
- printf ("%4lu MB\n", totlen >>20);
+ printf ("%3lu MB\n", totlen >>20);
}
#endif
diff --git a/board/ebony/ebony.h b/board/ebony/ebony.h
deleted file mode 100644
index 73d489e..0000000
--- a/board/ebony/ebony.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
deleted file mode 100644
index d8b4757..0000000
--- a/board/ebony/flash.c
+++ /dev/null
@@ -1,743 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
-
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
- {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
- {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
- {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
- {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
- {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_EBONY
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void) {
- unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
- unsigned char switch_status;
- unsigned short index = 0;
- int i;
-
-
- /* read FPGA base register FPGA_REG0 */
- switch_status = *fpga_base;
-
- /* check the bitmap of switch status */
- if (switch_status & BOOT_SMALL_FLASH) {
- index += BOOT_SMALL_FLASH_VAL;
- }
- if (switch_status & FLASH_ONBD_N) {
- index += FLASH_ONBD_N_VAL;
- }
- if (switch_status & FLASH_SRAM_SEL) {
- index += FLASH_SRAM_SEL_VAL;
- }
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size(
- (vu_long *)flash_addr_table[index][i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i]<<20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040) ||
- (info->flash_id == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n");
- break;
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
- );
- }
- printf ("\n");
- return;
- }
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
- static ulong flash_get_size (vu_long *addr, flash_info_t *info)
- {
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
- /* Write auto select command: read Manufacturer ID */
- udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
- udelay(1000);
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- DEBUGF("FLASH MANUFACT: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case (FLASH_WORD_SIZE)STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_F016D:
- info->flash_id += FLASH_AMD016;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
- case (FLASH_WORD_SIZE)STM_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE)AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040) ||
- (info->flash_id == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *)info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
- }
-
- int wait_for_DQ7(flash_info_t *info, int sect)
- {
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
- }
-
-/*-----------------------------------------------------------------------
- */
-
- int flash_erase (flash_info_t *info, int s_first, int s_last)
- {
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- printf("Erasing sector %p\n", addr2);
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
- DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
- }
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
- int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
- {
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
- }
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
- static int write_word (flash_info_t * info, ulong dest, ulong data)
- {
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
- }
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/ebony/u-boot.lds.debug b/board/ebony/u-boot.lds.debug
deleted file mode 100644
index af497b1..0000000
--- a/board/ebony/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
- ppc/extable.o (.text)
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index 03b3cdf..4acddef 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -208,22 +208,22 @@
}
static unsigned long UPMATable[] = {
- 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, //Words 0 to 3
- 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, //Words 4 to 7
- 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 8 to 11
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 12 to 15
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 16 to 19
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 20 to 23
- 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, //Words 24 to 27
- 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, //Words 28 to 31
- 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, //Words 32 to 35
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 36 to 39
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 40 to 43
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 44 to 47
- 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 48 to 51
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 52 to 55
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 56 to 59
- 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 //Words 60 to 63
+ 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, /* Words 0 to 3 */
+ 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, /* Words 4 to 7 */
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 8 to 11 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 12 to 15 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 16 to 19 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 20 to 23 */
+ 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, /* Words 24 to 27 */
+ 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */
+ 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, /* Words 32 to 35 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 36 to 39 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 40 to 43 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 44 to 47 */
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 48 to 51 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
+ 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 /* Words 60 to 63 */
};
int board_early_init_f (void)
diff --git a/board/ocotea/u-boot.lds.debug b/board/ocotea/u-boot.lds.debug
deleted file mode 100644
index 41534de..0000000
--- a/board/ocotea/u-boot.lds.debug
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/ppc4xx/start.o (.text)
- board/ocotea/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- cpu/ppc4xx/440gx_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* common/environment.o(.text) */
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
index 572cc9b..3868221 100644
--- a/board/pm520/flash.c
+++ b/board/pm520/flash.c
@@ -75,6 +75,8 @@
static int write_data (flash_info_t *info, ulong dest, FPW data);
static void flash_get_offsets (ulong base, flash_info_t *info);
void inline spin_wheel (void);
+static void flash_sync_real_protect (flash_info_t * info);
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
/*-----------------------------------------------------------------------
*/
@@ -101,6 +103,9 @@
break;
}
size += flash_info[i].size;
+
+ /* get the h/w and s/w protection status in sync */
+ flash_sync_real_protect(&flash_info[i]);
}
/* Protect monitor and environment sectors
@@ -138,7 +143,6 @@
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
}
}
}
@@ -270,6 +274,83 @@
}
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+static void flash_sync_real_protect (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+
+ case FLASH_28F128J3A:
+ case FLASH_28F640J3A:
+ case FLASH_28F320J3A:
+ for (i = 0; i < info->sector_count; ++i) {
+ info->protect[i] = intel_sector_protected(info, i);
+ }
+ break;
+ default:
+ /* no h/w protect support */
+ break;
+ }
+}
+
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
+{
+ FPWV *addr;
+ FPWV *lock_conf_addr;
+ ulong start;
+ unsigned char ret;
+
+ /*
+ * first, wait for the WSM to be finished. The rationale for
+ * waiting for the WSM to become idle for at most
+ * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * because of: (1) erase, (2) program or (3) lock bit
+ * configuration. So we just wait for the longest timeout of
+ * the (1)-(3), i.e. the erase timeout.
+ */
+
+ /* wait at least 35ns (W12) before issuing Read Status Register */
+ udelay(1);
+ addr = (FPWV *) info->start[sector];
+ *addr = (FPW) INTEL_STATUS;
+
+ start = get_timer (0);
+ while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+ if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ *addr = (FPW) INTEL_RESET; /* restore read mode */
+ printf("WSM busy too long, can't get prot status\n");
+ return 1;
+ }
+ }
+
+ /* issue the Read Identifier Codes command */
+ *addr = (FPW) INTEL_READID;
+
+ /* wait at least 35ns (W12) before reading */
+ udelay(1);
+
+ /* Intel example code uses offset of 2 for 16 bit flash */
+ lock_conf_addr = (FPWV *) info->start[sector] + 2;
+ ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+ /* put flash back in read mode */
+ *addr = (FPW) INTEL_RESET;
+
+ return ret;
+}
+
/*-----------------------------------------------------------------------
*/
@@ -491,7 +572,7 @@
* 0 - OK
* 1 - Error (timeout, voltage problems, etc.)
*/
-int flash_real_protect(flash_info_t *info, long sector, int prot)
+int flash_real_protect (flash_info_t *info, long sector, int prot)
{
ulong start;
int i;
@@ -531,6 +612,11 @@
/*
* Clear lock bit command clears all sectors lock bits, so
* we have to restore lock bits of protected sectors.
+ * WARNING: code below re-locks sectors only for one bank (info).
+ * This causes problems on boards where several banks share
+ * the same chip, as sectors in othere banks will be unlocked
+ * but not re-locked. It works fine on pm520 though, as there
+ * is only one chip and one bank.
*/
if (!prot)
{
@@ -553,6 +639,11 @@
}
}
}
+ /*
+ * get the s/w sector protection status in sync with the h/w,
+ * in case something went wrong during the re-locking.
+ */
+ flash_sync_real_protect(info); /* resets flash to read mode */
}
if (flag)
diff --git a/board/walnut405/Makefile b/board/walnut405/Makefile
deleted file mode 100644
index 97d6a1e..0000000
--- a/board/walnut405/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS = $(BOARD).o flash.o
-SOBJS = init.o
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/board/walnut405/config.mk b/board/walnut405/config.mk
deleted file mode 100644
index 8426bb3..0000000
--- a/board/walnut405/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
deleted file mode 100644
index 462c09e..0000000
--- a/board/walnut405/flash.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
- uint pbcr;
- unsigned long base_b0, base_b1;
-
- /* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1)
- {
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM+monitor_flash_len-1,
- &flash_info[0]);
- size_b1 = 0 ;
- flash_info[0].size = size_b0;
- }
-
- /* 2 banks */
- else
- {
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- /* Re-do sizing to get full correct info */
-
- if (size_b1)
- {
- mtdcr(ebccfga, pb0cr);
- pbcr = mfdcr(ebccfgd);
- mtdcr(ebccfga, pb0cr);
- base_b1 = -size_b1;
- pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
- mtdcr(ebccfgd, pbcr);
- /* printf("pb1cr = %x\n", pbcr); */
- }
-
- if (size_b0)
- {
- mtdcr(ebccfga, pb1cr);
- pbcr = mfdcr(ebccfgd);
- mtdcr(ebccfga, pb1cr);
- base_b0 = base_b1 - size_b0;
- pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
- mtdcr(ebccfgd, pbcr);
- /* printf("pb0cr = %x\n", pbcr); */
- }
-
- size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
-
- flash_get_offsets (base_b0, &flash_info[0]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- base_b0+size_b0-monitor_flash_len,
- base_b0+size_b0-1,
- &flash_info[0]);
-
- if (size_b1) {
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
-
- flash_get_offsets (base_b1, &flash_info[1]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- base_b1+size_b1-monitor_flash_len,
- base_b1+size_b1-1,
- &flash_info[1]);
- /* monitor protection OFF by default (one is enough) */
- (void)flash_protect(FLAG_PROTECT_CLEAR,
- base_b0+size_b0-monitor_flash_len,
- base_b0+size_b0-1,
- &flash_info[0]);
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- }/* else 2 banks */
- return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)){
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-#if 0 /* test-only */
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
-#else
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
-#endif
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- /* printf("\ndev_code=%x\n", value); */
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE)AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)){
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *)info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- printf("Erasing sector %p\n", addr2); /* CLH */
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
deleted file mode 100644
index 70d029a..0000000
--- a/board/walnut405/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function: ext_bus_cntlr_init */
-/* Description: Initializes the External Bus Controller for the external */
-/* peripherals. IMPORTANT: For pass1 this code must run from */
-/* cache since you can not reliably change a peripheral banks */
-/* timing register (pbxap) while running code from that bank. */
-/* For ex., since we are running from ROM on bank 0, we can NOT */
-/* execute the code that modifies bank 0 timings from ROM, so */
-/* we run it from cache. */
-/* Bank 0 - Flash and SRAM */
-/* Bank 1 - NVRAM/RTC */
-/* Bank 2 - Keyboard/Mouse controller */
-/* Bank 3 - IR controller */
-/* Bank 4 - not used */
-/* Bank 5 - not used */
-/* Bank 6 - not used */
-/* Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
- .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
- mflr r4 /* save link register */
- bl ..getAddr
-..getAddr:
- mflr r3 /* get address of ..getAddr */
- mtlr r4 /* restore link register */
- addi r4,0,14 /* set ctr to 10; used to prefetch */
- mtctr r4 /* 10 cache lines to fit this function */
- /* in cache (gives us 8x10=80 instrctns) */
-..ebcloop:
- icbt r0,r3 /* prefetch cache line for addr in r3 */
- addi r3,r3,32 /* move to next cache line */
- bdnz ..ebcloop /* continue for 10 cache lines */
-
- /*------------------------------------------------------------------- */
- /* Delay to ensure all accesses to ROM are complete before changing */
- /* bank 0 timings. 200usec should be enough. */
- /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
- /*------------------------------------------------------------------- */
- addis r3,0,0x0
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
-..spinlp:
- bdnz ..spinlp /* spin loop */
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 0 (Flash and SRAM) initialization */
- /*----------------------------------------------------------------------- */
- addi r4,0,pb0ap
- mtdcr ebccfga,r4
- addis r4,0,0x9B01
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
-
- addi r4,0,pb0cr
- mtdcr ebccfga,r4
- addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
- ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
- mtdcr ebccfgd,r4
-
- blr
-
-
-/*----------------------------------------------------------------------------- */
-/* Function: sdram_init */
-/* Description: Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
- .globl sdram_init
-sdram_init:
- blr
diff --git a/board/walnut405/u-boot.lds.debug b/board/walnut405/u-boot.lds.debug
deleted file mode 100644
index d483424..0000000
--- a/board/walnut405/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/walnut405/walnut405.c b/board/walnut405/walnut405.c
deleted file mode 100644
index 7035599..0000000
--- a/board/walnut405/walnut405.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "walnut405.h"
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-int board_early_init_f (void)
-{
- /*-------------------------------------------------------------------------+
- | Interrupt controller setup for the Walnut board.
- | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
- | IRQ 16 405GP internally generated; active low; level sensitive
- | IRQ 17-24 RESERVED
- | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
- | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
- | IRQ 27 (EXT IRQ 2) Not Used
- | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
- | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
- | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
- | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
- | Note for Walnut board:
- | An interrupt taken for the FPGA (IRQ 25) indicates that either
- | the Mouse, Keyboard, IRDA, or External Expansion caused the
- | interrupt. The FPGA must be read to determine which device
- | caused the interrupt. The default setting of the FPGA clears
- |
- +-------------------------------------------------------------------------*/
-
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
-
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
- /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb1ap, 0x02815480);
- mtebc (pb1cr, 0xF0018000);
-
- /* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb2ap, 0x04815A80);
- mtebc (pb2cr, 0xF0118000);
-
- /* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb3ap, 0x01815280);
- mtebc (pb3cr, 0xF0218000);
-
- /* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb7ap, 0x01815280);
- mtebc (pb7cr, 0xF0318000);
-
- /* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC 0xF0300004
- *(volatile char *) (FPGA_BRDC) |= 0x1;
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- unsigned char *s = getenv ("serial#");
- unsigned char *e;
-
- puts ("Board: ");
-
- if (!s || strncmp (s, "WALNUT405", 9)) {
- puts ("### No HW ID - assuming WALNUT405");
- } else {
- for (e = s; *e; ++e) {
- if (*e == ' ')
- break;
- }
- for (; s < e; ++s) {
- putc (*s);
- }
- }
- putc ('\n');
-
- return (0);
-}
-
-
-/* -------------------------------------------------------------------------
- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- the necessary info for SDRAM controller configuration
- ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
- return spd_sdram (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/walnut405/walnut405.h b/board/walnut405/walnut405.h
deleted file mode 100644
index 5fc313a..0000000
--- a/board/walnut405/walnut405.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index c118f06..4914ac5 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -61,13 +61,15 @@
#endif
print_num ("bootflags", bd->bi_bootflags );
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300)
+ defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
+ defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
+ defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
-#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300 */
+#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
#if defined(CONFIG_CPM2)
print_str ("vco", strmhz(buf, bd->bi_vco));
print_str ("sccfreq", strmhz(buf, bd->bi_sccfreq));
@@ -78,7 +80,7 @@
print_str ("cpmfreq", strmhz(buf, bd->bi_cpmfreq));
#endif
print_str ("busfreq", strmhz(buf, bd->bi_busfreq));
-#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300 */
+#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440_EP CONFIG_440_GR */
#if defined(CONFIG_MPC8220)
print_str ("inpfreq", strmhz(buf, bd->bi_inpfreq));
print_str ("flbfreq", strmhz(buf, bd->bi_flbfreq));
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 37286e8..eccf2e9 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -78,7 +78,7 @@
* ====================================================================== */
int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_WALNUT405) || \
+#if defined(CONFIG_WALNUT) || \
defined(CFG_VXWORKS_MAC_PTR)
DECLARE_GLOBAL_DATA_PTR;
#endif
@@ -121,7 +121,7 @@
* This will vary from board to board
*/
-#if defined(CONFIG_WALNUT405)
+#if defined(CONFIG_WALNUT)
tmp = (char *) CFG_NVRAM_BASE_ADDR + 0x500;
memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[3], 3);
#elif defined(CFG_VXWORKS_MAC_PTR)
diff --git a/common/lynxkdi.c b/common/lynxkdi.c
index 14aa175..19f0620 100644
--- a/common/lynxkdi.c
+++ b/common/lynxkdi.c
@@ -20,7 +20,7 @@
#if defined(CONFIG_LYNXKDI)
#include <lynxkdi.h>
-#if defined(CONFIG_MPC8260)
+#if defined(CONFIG_MPC8260) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
void lynxkdi_boot ( image_header_t *hdr )
{
void (*lynxkdi)(void) = (void(*)(void))hdr->ih_ep;
diff --git a/common/usb.c b/common/usb.c
index 811ed24..03eccf8 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -46,7 +46,6 @@
#include <405gp_pci.h>
#endif
-
#undef USB_DEBUG
#ifdef USB_DEBUG
@@ -523,6 +522,7 @@
if (result > 0)
break;
}
+
return result;
}
@@ -723,6 +723,7 @@
/* find the port number we're at */
if (parent) {
+
for (j = 0; j < parent->maxchild; j++) {
if (parent->children[j] == dev) {
port = j;
@@ -956,6 +957,7 @@
return -1;
if (portstatus & USB_PORT_STAT_ENABLE) {
+
break;
}
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
index eb80b1c..b4cc744 100644
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/cpu/arm920t/s3c24x0/usb_ohci.c
@@ -53,6 +53,7 @@
#define OHCI_USE_NPS /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
@@ -1219,7 +1220,6 @@
return stat;
}
-
/*-------------------------------------------------------------------------*/
/* common code for handling submit messages - used for all but root hub */
diff --git a/cpu/ppc4xx/405gp_enet.c b/cpu/ppc4xx/405gp_enet.c
index 9d8e2b6..9c17e31 100644
--- a/cpu/ppc4xx/405gp_enet.c
+++ b/cpu/ppc4xx/405gp_enet.c
@@ -227,7 +227,12 @@
/* wait for reset */
while (mfdcr (malmcr) & MAL_CR_MMSR) {
};
-#if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ out32 (ZMII_FER, 0);
+ udelay(100);
+ /* set RII mode */
+ out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
+#elif defined(CONFIG_440)
/* set RMII mode */
out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
#endif /* CONFIG_440 */
@@ -461,6 +466,18 @@
out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
else
out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ mfsdr(sdr_mfr, reg);
+ /* set speed */
+ if (speed == _100BASET) {
+ out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
+ reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
+ } else {
+ reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
+ out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
+ }
+ mtsdr(sdr_mfr, reg);
+#endif
#endif
/* Enable broadcast and indvidual address */
@@ -498,11 +515,6 @@
/*
* Connect interrupt service routines
*/
-#if !defined(CONFIG_405EP)
- /* 405EP has one EWU interrupt */
- irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2),
- (interrupt_handler_t *) enetInt, dev);
-#endif
irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
(interrupt_handler_t *) enetInt, dev);
}
@@ -993,12 +1005,6 @@
mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */
mtdcr (malier, mal_ier);
-#if defined(CONFIG_405EP)
- /* 405EP has one EWU interrupt */
- irq_install_handler (VECNUM_EWU0,
- (interrupt_handler_t *) enetInt,
- dev);
-#endif
/* install MAL interrupt handler */
irq_install_handler (VECNUM_MS,
(interrupt_handler_t *) enetInt,
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 4f1754a..ebbcfd5 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -437,7 +437,7 @@
* The PCI initialization sequence enable bit must be set ... if not abort
* pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
-#if defined (CONFIG_440_GX)
+#if defined (CONFIG_440_GX) || defined (CONFIG_440_EP) || defined(CONFIG_440_GR)
mfsdr(sdr_sdstp1,strap);
if ( (strap & 0x00010000) == 0 ){
printf("PCI: SDR0_STRP1[PISE] not set.\n");
@@ -498,7 +498,7 @@
#if defined(CONFIG_440_GX)
out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
-#else
+#elif defined(PCIX0_BRDGOPT1)
out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */
#endif
@@ -531,7 +531,9 @@
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
+#if !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
+#endif
hose->last_busno = pci_hose_scan(hose);
}
}
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/440gx_enet.c
index 871f83b..24e6ef3 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/440gx_enet.c
@@ -167,6 +167,8 @@
/* EMAC RESET */
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
+ hw_p->print_speed = 1; /* print speed message again next time */
+
return;
}
@@ -277,7 +279,9 @@
unsigned short devnum;
unsigned short reg_short;
sys_info_t sysinfo;
+#if defined(CONFIG_440_GX)
int ethgroup;
+#endif
EMAC_440GX_HW_PST hw_p = dev->priv;
@@ -289,7 +293,6 @@
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
-
msr = mfmsr ();
mtmsr (msr & ~(MSR_EE)); /* disable interrupts */
@@ -320,7 +323,12 @@
/* MAL Channel RESET */
/* 1st reset MAL channel */
/* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
+#else
mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
+#endif
+
mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
/* wait for reset */
@@ -354,7 +362,9 @@
out32 (ZMII_FER, 0);
udelay (100);
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+#elif defined(CONFIG_440_GX)
ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
#else
if ((devnum == 0) || (devnum == 1)) {
@@ -499,6 +509,15 @@
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ mfsdr(sdr_mfr, reg);
+ if (speed == 100) {
+ reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
+ } else {
+ reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
+ }
+ mtsdr(sdr_mfr, reg);
+#endif
/* Set ZMII/RGMII speed according to the phy link speed */
reg = in32 (ZMII_SSR);
if ( (speed == 100) || (speed == 1000) )
@@ -618,8 +637,12 @@
switch (devnum) {
case 1:
/* setup MAL tx & rx channel pointers */
- mtdcr (maltxbattr, 0x0);
+#if defined (CONFIG_440_EP) || defined (CONFIG_440_GR)
+ mtdcr (maltxctp2r, hw_p->tx);
+#else
mtdcr (maltxctp1r, hw_p->tx);
+#endif
+ mtdcr (maltxbattr, 0x0);
mtdcr (malrxbattr, 0x0);
mtdcr (malrxctp1r, hw_p->rx);
/* set RX buffer size */
@@ -658,7 +681,11 @@
}
/* Enable MAL transmit and receive channels */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
+#else
mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
+#endif
mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
/* set transmit enable & receive enable */
@@ -1148,19 +1175,24 @@
int ppc_440x_eth_initialize (bd_t * bis)
{
static int virgin = 0;
- unsigned long pfc1;
struct eth_device *dev;
int eth_num = 0;
-
EMAC_440GX_HW_PST hw = NULL;
+#if defined(CONFIG_440_GX)
+ unsigned long pfc1;
+
mfsdr (sdr_pfc1, pfc1);
pfc1 &= ~(0x01e00000);
pfc1 |= 0x01200000;
mtsdr (sdr_pfc1, pfc1);
+#endif
/* set phy num and mode */
bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+#if defined(CONFIG_PHY1_ADDR)
bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+#endif
+#if defined(CONFIG_440_GX)
bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
bis->bi_phymode[0] = 0;
@@ -1171,6 +1203,7 @@
#if defined (CONFIG_440_GX)
ppc_440x_eth_setup_bridge(0, bis);
#endif
+#endif
for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
@@ -1256,6 +1289,7 @@
}
hw->devnum = eth_num;
+ hw->print_speed = 1;
sprintf (dev->name, "ppc_440x_eth%d", eth_num);
dev->priv = (void *) hw;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index a841109..5b16754 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -31,7 +31,7 @@
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
miiphy.o miiphy_440.o sdram.o serial.o \
- spd_sdram.o speed.o traps.o
+ spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o
OBJS = $(AOBJS) $(COBJS)
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 06acb81..ae45a23 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -71,17 +71,17 @@
get_sys_info(&sys_info);
#ifdef CONFIG_405GP
- puts ("IBM PowerPC 405GP");
+ puts ("AMCC PowerPC 405GP");
if (pvr == PVR_405GPR_RB) {
putc('r');
}
puts (" Rev. ");
#endif
#ifdef CONFIG_405CR
- puts ("IBM PowerPC 405CR Rev. ");
+ puts ("AMCC PowerPC 405CR Rev. ");
#endif
#ifdef CONFIG_405EP
- puts ("IBM PowerPC 405EP Rev. ");
+ puts ("AMCC PowerPC 405EP Rev. ");
#endif
switch (pvr) {
case PVR_405GP_RB:
@@ -152,10 +152,10 @@
#endif
#if defined(CONFIG_440)
- puts ("IBM PowerPC 440 G");
+ puts ("AMCC PowerPC 440 ");
switch(pvr) {
case PVR_440GP_RB:
- puts("P Rev. B");
+ puts("GP Rev. B");
/* See errata 1.12: CHIP_4 */
if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) ||
(mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){
@@ -167,19 +167,35 @@
}
break;
case PVR_440GP_RC:
- puts("P Rev. C");
+ puts("GP Rev. C");
break;
case PVR_440GX_RA:
- puts("X Rev. A");
+ puts("GX Rev. A");
break;
case PVR_440GX_RB:
- puts("X Rev. B");
+ puts("GX Rev. B");
break;
case PVR_440GX_RC:
- puts("X Rev. C");
+ puts("GX Rev. C");
break;
+#if defined(CONFIG_440_GR)
+ case PVR_440EP_RA:
+ puts("GR Rev. A");
+ break;
+ case PVR_440EP_RB:
+ puts("GR Rev. B");
+ break;
+#else
+ case PVR_440EP_RA:
+ puts("EP Rev. A");
+ break;
+ case PVR_440EP_RB:
+ puts("EP Rev. B");
+ break;
+#endif
+
default:
- printf (" UNKNOWN (PVR=%08x)", pvr);
+ printf ("UNKNOWN (PVR=%08x)", pvr);
break;
}
#endif
@@ -193,6 +209,12 @@
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
+#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
+ /*give reset to BCSR*/
+ *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
+
+#else
+
/*
* Initiate system reset in debug control register DBCR
*/
@@ -202,6 +224,8 @@
#else
__asm__ __volatile__("mtspr 0x3f2, 3");
#endif
+
+#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
return 1;
}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 25508e7..74f0135 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -188,7 +188,11 @@
unsigned long val;
val = mfspr(tcr);
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ val |= 0xb8000000; /* generate system reset after 1.34 seconds */
+#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
+#endif
mtspr(tcr, val);
val = mfspr(tsr);
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 90899dd..c0e51f9 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -430,7 +430,10 @@
#endif /* CONFIG_440_GX */
#endif /* CONFIG_440 */
- if (irqa[i].handler != NULL) {
+ /*
+ * print warning when replacing with a different irq vector
+ */
+ if ((irqa[i].handler != NULL) && (irqa[i].handler != handler)) {
printf ("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
vec, (uint) handler, (uint) irqa[i].handler);
}
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 4abd3fc..92f8ddb 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -269,9 +269,14 @@
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
#if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
+#else
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
-#if defined(CONFIG_440_GX)
+#endif
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
@@ -301,14 +306,14 @@
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define UART0_SDR sdr_uart1
#define UART1_SDR sdr_uart0
#endif /* CONFIG_440_GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#endif /* CONFIG_440_GX */
@@ -460,7 +465,7 @@
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index 794a72c..520107a 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -16,6 +16,9 @@
* Jun Gu, Artesyn Technology, jung@artesyncp.com
* Support for IBM 440 based on OpenBIOS draminit.c from IBM.
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -53,7 +56,9 @@
#define CFG_I2C_SLAVE 0xFE
#endif
+#define ONE_BILLION 1000000000
+
-#ifndef CONFIG_440 /* for 405 WALNUT board */
+#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
#define SDRAM0_CFG_DCE 0x80000000
#define SDRAM0_CFG_SRE 0x40000000
@@ -111,7 +116,7 @@
long int spd_sdram(int(read_spd)(uint addr))
{
- int bus_period,tmp,row,col;
+ int tmp,row,col;
int total_size,bank_size,bank_code;
int ecc_on;
int mode;
@@ -141,226 +146,189 @@
int t_rc;
int min_cas;
- if(read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- }
-
+ PPC405_SYS_INFO sys_info;
+ unsigned long bus_period_x_10;
/*
- * Calculate the bus period, we do it this
- * way to minimize stack utilization.
+ * get the board info
*/
-#ifndef CONFIG_405EP
- tmp = (mfdcr(pllmd) >> (31-6)) & 0xf; /* get FBDV bits */
- tmp = CONFIG_SYS_CLK_FREQ * tmp; /* get plb freq */
-#else
- {
- unsigned long freqCPU;
- unsigned long pllmr0;
- unsigned long pllmr1;
- unsigned long pllFbkDiv;
- unsigned long pllPlbDiv;
- unsigned long pllmr0_ccdv;
-
- /*
- * Read PLL Mode registers
- */
- pllmr0 = mfdcr (cpc0_pllmr0);
- pllmr1 = mfdcr (cpc0_pllmr1);
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
- pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
- if (pllFbkDiv == 0) {
- pllFbkDiv = 16;
- }
- pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
- /*
- * Determine CPU clock frequency
- */
- pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
- if (pllmr1 & PLLMR1_SSCS_MASK) {
- freqCPU = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / pllmr0_ccdv;
- } else {
- freqCPU = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
- }
-
+ if (read_spd == 0){
+ read_spd=spd_read;
/*
- * Determine PLB clock frequency
+ * Make sure I2C controller is initialized
+ * before continuing.
*/
- tmp = freqCPU / pllPlbDiv;
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
}
-#endif
- bus_period = sdram_HZ_to_ns(tmp); /* get sdram speed */
/* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04){
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
-/*------------------------------------------------------------------
- configure memory timing register
+ if (read_spd(2) != 0x04) {
+ SPD_ERR("SDRAM - non SDRAM memory module found\n");
+ }
- data from DIMM:
- 27 IN Row Precharge Time ( t RP)
- 29 MIN RAS to CAS Delay ( t RCD)
- 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- -------------------------------------------------------------------*/
+ /* ------------------------------------------------------------------
+ * configure memory timing register
+ *
+ * data from DIMM:
+ * 27 IN Row Precharge Time ( t RP)
+ * 29 MIN RAS to CAS Delay ( t RCD)
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * -------------------------------------------------------------------*/
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
+ /*
+ * first figure out which cas latency mode to use
+ * use the min supported mode
+ */
tmp = read_spd(127) & 0x6;
- if(tmp == 0x02){ /* only cas = 2 supported */
- min_cas = 2;
+ if (tmp == 0x02){ /* only cas = 2 supported */
+ min_cas = 2;
/* t_ck = read_spd(9); */
/* t_ac = read_spd(10); */
- }
- else if (tmp == 0x04){ /* only cas = 3 supported */
- min_cas = 3;
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
+ min_cas = 3;
/* t_ck = read_spd(9); */
/* t_ac = read_spd(10); */
- }
- else if (tmp == 0x06){ /* 2,3 supported, so use 2 */
- min_cas = 2;
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+ min_cas = 2;
/* t_ck = read_spd(23); */
/* t_ac = read_spd(24); */
- }
- else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
+ } else {
+ SPD_ERR("SDRAM - unsupported CAS latency \n");
}
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
+ /* get some timing values, t_rp,t_rcd,t_ras,t_rc
+ */
+ t_rp = read_spd(27);
+ t_rcd = read_spd(29);
+ t_ras = read_spd(30);
+ t_rc = t_ras + t_rp;
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= (((t_rp - 1)/bus_period) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = ((t_rc - t_rcd - t_rp -1) / bus_period) & 0x3;
- if(tmp<1) tmp=1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = ( (t_rc - 1) / bus_period)-3;
- if(tmp<0)tmp=0;
- if(tmp>6)tmp=6;
+ /* The following timing calcs subtract 1 before deviding.
+ * this has effect of using ceiling instead of floor rounding,
+ * and also subtracting 1 to convert number to reg value
+ */
+ /* set up CASL */
+ sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+ /* set up PTA */
+ sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+ /* set up CTP */
+ tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+ if (tmp < 1)
+ tmp = 1;
+ sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+ /* set LDF = 2 cycles, reg value = 1 */
+ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+ /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+ tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+ if (tmp < 0)
+ tmp = 0;
+ if (tmp > 6)
+ tmp = 6;
sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= (((t_rcd - 1) / bus_period) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+ /* set RCD = t_rcd/bus_period*/
+ sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-/*------------------------------------------------------------------
- configure RTR register
- -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch(tmp){
+ /*------------------------------------------------------------------
+ * configure RTR register
+ * -------------------------------------------------------------------*/
+ row = read_spd(3);
+ col = read_spd(4);
+ tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+ switch (tmp) {
case 0x00:
- tmp=15625;
- break;
+ tmp = 15625;
+ break;
case 0x01:
- tmp=15625/4;
- break;
+ tmp = 15625 / 4;
+ break;
case 0x02:
- tmp=15625/2;
- break;
+ tmp = 15625 / 2;
+ break;
case 0x03:
- tmp=15625*2;
- break;
+ tmp = 15625 * 2;
+ break;
case 0x04:
- tmp=15625*4;
- break;
+ tmp = 15625 * 4;
+ break;
case 0x05:
- tmp=15625*8;
- break;
+ tmp = 15625 * 8;
+ break;
default:
- SPD_ERR("SDRAM - Bad refresh period \n");
+ SPD_ERR("SDRAM - Bad refresh period \n");
}
/* convert from nsec to bus cycles */
- tmp = tmp/bus_period;
- sdram0_rtr = (tmp & 0x3ff8)<< SDRAM0_RTR_SHIFT;
+ tmp = (tmp * 10) / bus_period_x_10;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-/*------------------------------------------------------------------
- determine the number of banks used
- -------------------------------------------------------------------*/
+ /*------------------------------------------------------------------
+ * determine the number of banks used
+ * -------------------------------------------------------------------*/
/* byte 7:6 is module data width */
- if(read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
+ if (read_spd(7) != 0)
+ SPD_ERR("SDRAM - unsupported module width\n");
tmp = read_spd(6);
if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
+ SPD_ERR("SDRAM - unsupported module width\n");
else if (tmp < 64)
- bank_cnt=1; /* one bank per sdram side */
+ bank_cnt = 1; /* one bank per sdram side */
else if (tmp < 73)
- bank_cnt=2; /* need two banks per side */
+ bank_cnt = 2; /* need two banks per side */
else if (tmp < 161)
- bank_cnt=4; /* need four banks per side */
+ bank_cnt = 4; /* need four banks per side */
else
- SPD_ERR("SDRAM - unsupported module width\n");
+ SPD_ERR("SDRAM - unsupported module width\n");
/* byte 5 is the module row count (refered to as dimm "sides") */
tmp = read_spd(5);
- if(tmp==1);
- else if(tmp==2) bank_cnt *=2;
- else if(tmp==4) bank_cnt *=4;
- else bank_cnt = 8; /* 8 is an error code */
+ if (tmp == 1)
+ ;
+ else if (tmp==2)
+ bank_cnt *= 2;
+ else if (tmp==4)
+ bank_cnt *= 4;
+ else
+ bank_cnt = 8; /* 8 is an error code */
- if(bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
+ if (bank_cnt > 4) /* we only have 4 banks to work with */
+ SPD_ERR("SDRAM - unsupported module rows for this width\n");
/* now check for ECC ability of module. We only support ECC
* on 32 bit wide devices with 8 bit ECC.
*/
- if ( (read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8) ){
- sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- }
- else{
- sdram0_ecccfg=0;
- ecc_on = 0;
+ if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+ sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+ ecc_on = 1;
+ } else {
+ sdram0_ecccfg = 0;
+ ecc_on = 0;
}
-/*------------------------------------------------------------------
- calculate total size
- -------------------------------------------------------------------*/
+ /*------------------------------------------------------------------
+ * calculate total size
+ * -------------------------------------------------------------------*/
/* calculate total size and do sanity check */
tmp = read_spd(31);
- total_size=1<<22; /* total_size = 4MB */
+ total_size = 1 << 22; /* total_size = 4MB */
/* now multiply 4M by the smallest device row density */
/* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)){
- total_size= total_size<<1;
- tmp = tmp>>1;
- }
+ while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+ total_size = total_size << 1;
+ tmp = tmp >> 1;
+ }
total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-/*------------------------------------------------------------------
- map rows * cols * banks to a mode
- -------------------------------------------------------------------*/
+ /*------------------------------------------------------------------
+ * map rows * cols * banks to a mode
+ * -------------------------------------------------------------------*/
- switch( row )
- {
+ switch (row) {
case 11:
- switch ( col )
- {
+ switch (col) {
case 8:
mode=4; /* mode 5 */
break;
@@ -369,12 +337,11 @@
mode=0; /* mode 1 */
break;
default:
- SPD_ERR("SDRAM - unsupported mode\n");
+ SPD_ERR("SDRAM - unsupported mode\n");
}
break;
case 12:
- switch ( col )
- {
+ switch (col) {
case 8:
mode=3; /* mode 4 */
break;
@@ -383,37 +350,36 @@
mode=1; /* mode 2 */
break;
default:
- SPD_ERR("SDRAM - unsupported mode\n");
+ SPD_ERR("SDRAM - unsupported mode\n");
}
break;
case 13:
- switch ( col )
- {
+ switch (col) {
case 8:
mode=5; /* mode 6 */
break;
case 9:
case 10:
- if (read_spd(17) ==2 )
- mode=6; /* mode 7 */
+ if (read_spd(17) == 2)
+ mode = 6; /* mode 7 */
else
- mode=2; /* mode 3 */
+ mode = 2; /* mode 3 */
break;
case 11:
- mode=2; /* mode 3 */
+ mode = 2; /* mode 3 */
break;
default:
- SPD_ERR("SDRAM - unsupported mode\n");
+ SPD_ERR("SDRAM - unsupported mode\n");
}
break;
default:
- SPD_ERR("SDRAM - unsupported mode\n");
+ SPD_ERR("SDRAM - unsupported mode\n");
}
-/*------------------------------------------------------------------
- using the calculated values, compute the bank
- config register values.
- -------------------------------------------------------------------*/
+ /*------------------------------------------------------------------
+ * using the calculated values, compute the bank
+ * config register values.
+ * -------------------------------------------------------------------*/
sdram0_b1cr = 0;
sdram0_b2cr = 0;
sdram0_b3cr = 0;
@@ -421,44 +387,46 @@
/* compute the size of each bank */
bank_size = total_size / bank_cnt;
/* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp=bank_size; /* start with tmp = bank_size */
- bank_code=0; /* and bank_code = 0 */
- while (tmp>1){ /* this takes log2 of tmp */
+ by takeing log2(bank_size) - 22 */
+ tmp = bank_size; /* start with tmp = bank_size */
+ bank_code = 0; /* and bank_code = 0 */
+ while (tmp > 1) { /* this takes log2 of tmp */
bank_code++; /* and stores result in bank_code */
- tmp=tmp>>1;
- } /* bank_code is now log2(bank_size) */
- bank_code-=22; /* subtract 22 to get the code */
+ tmp = tmp >> 1;
+ } /* bank_code is now log2(bank_size) */
+ bank_code -= 22; /* subtract 22 to get the code */
tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size) * 0 | tmp;
+ sdram0_b0cr = (bank_size * 0) | tmp;
#ifndef CONFIG_405EP /* not on PPC405EP */
- if(bank_cnt>1) sdram0_b2cr = (bank_size) * 1 | tmp;
- if(bank_cnt>2) sdram0_b1cr = (bank_size) * 2 | tmp;
- if(bank_cnt>3) sdram0_b3cr = (bank_size) * 3 | tmp;
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
#else
/* PPC405EP chip only supports two SDRAM banks */
- if(bank_cnt>1) sdram0_b1cr = (bank_size) * 1 | tmp;
- if(bank_cnt>2) total_size -= (bank_size) * (bank_cnt - 2);
+ if (bank_cnt > 1)
+ sdram0_b1cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ total_size = 2 * bank_size;
#endif
-
/*
* enable sdram controller DCE=1
* enable burst read prefetch to 32 bytes BRPF=2
* leave other functions off
*/
-/*------------------------------------------------------------------
- now that we've done our calculations, we are ready to
- program all the registers.
- -------------------------------------------------------------------*/
-
+ /*------------------------------------------------------------------
+ * now that we've done our calculations, we are ready to
+ * program all the registers.
+ * -------------------------------------------------------------------*/
#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
/* disable memcontroller so updates work */
- sdram0_cfg = 0;
- mtsdram0( mem_mcopt1, sdram0_cfg );
+ mtsdram0( mem_mcopt1, 0 );
#ifndef CONFIG_405EP /* not on PPC405EP */
mtsdram0( mem_besra , sdram0_besr0 );
@@ -479,15 +447,10 @@
/* SDRAM have a power on delay, 500 micro should do */
udelay(500);
sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if(ecc_on) sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram0( mem_mcopt1, sdram0_cfg );
+ if (ecc_on)
+ sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+ mtsdram0(mem_mcopt1, sdram0_cfg);
-
- /* kernel 2.4.2 from mvista has a bug with memory over 128MB */
-#ifdef MVISTA_MEM_BUG
- if (total_size > 128*1024*1024 )
- total_size=128*1024*1024;
-#endif
return (total_size);
}
@@ -504,8 +467,8 @@
#else /* CONFIG_440 */
/*-----------------------------------------------------------------------------
-| Memory Controller Options 0
-+-----------------------------------------------------------------------------*/
+ | Memory Controller Options 0
+ +-----------------------------------------------------------------------------*/
#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
@@ -520,39 +483,39 @@
#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
/*-----------------------------------------------------------------------------
-| Memory Controller Options 1
-+-----------------------------------------------------------------------------*/
+ | Memory Controller Options 1
+ +-----------------------------------------------------------------------------*/
#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
/*-----------------------------------------------------------------------------+
-| SDRAM DEVPOT Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM DEVPOT Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_DEVOPT_DLL 0x80000000
#define SDRAM_DEVOPT_DS 0x40000000
/*-----------------------------------------------------------------------------+
-| SDRAM MCSTS Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM MCSTS Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_MCSTS_MRSC 0x80000000
#define SDRAM_MCSTS_SRMS 0x40000000
#define SDRAM_MCSTS_CIS 0x20000000
/*-----------------------------------------------------------------------------
-| SDRAM Refresh Timer Register
-+-----------------------------------------------------------------------------*/
+ | SDRAM Refresh Timer Register
+ +-----------------------------------------------------------------------------*/
#define SDRAM_RTR_RINT_MASK 0xFFFF0000
#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
/*-----------------------------------------------------------------------------+
-| SDRAM UABus Base Address Reg
-+-----------------------------------------------------------------------------*/
+ | SDRAM UABus Base Address Reg
+ +-----------------------------------------------------------------------------*/
#define SDRAM_UABBA_UBBA_MASK 0x0000000F
/*-----------------------------------------------------------------------------+
-| Memory Bank 0-7 configuration
-+-----------------------------------------------------------------------------*/
+ | Memory Bank 0-7 configuration
+ +-----------------------------------------------------------------------------*/
#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
@@ -570,8 +533,8 @@
#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
/*-----------------------------------------------------------------------------+
-| SDRAM TR0 Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM TR0 Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_TR0_SDWR_MASK 0x80000000
#define SDRAM_TR0_SDWR_2_CLK 0x00000000
#define SDRAM_TR0_SDWR_3_CLK 0x80000000
@@ -609,8 +572,8 @@
#define SDRAM_TR0_SDRD_4_CLK 0x00000003
/*-----------------------------------------------------------------------------+
-| SDRAM TR1 Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM TR1 Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_TR1_RDSS_MASK 0xC0000000
#define SDRAM_TR1_RDSS_TR0 0x00000000
#define SDRAM_TR1_RDSS_TR1 0x40000000
@@ -630,8 +593,8 @@
#define SDRAM_TR1_RDCT_MAX 0x000001FF
/*-----------------------------------------------------------------------------+
-| SDRAM WDDCTR Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM WDDCTR Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
@@ -639,8 +602,8 @@
#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
-| SDRAM CLKTR Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM CLKTR Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
@@ -648,18 +611,17 @@
#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
-| SDRAM DLYCAL Options
-+-----------------------------------------------------------------------------*/
+ | SDRAM DLYCAL Options
+ +-----------------------------------------------------------------------------*/
#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
/*-----------------------------------------------------------------------------+
-| General Definition
-+-----------------------------------------------------------------------------*/
+ | General Definition
+ +-----------------------------------------------------------------------------*/
#define DEFAULT_SPD_ADDR1 0x53
#define DEFAULT_SPD_ADDR2 0x52
-#define ONE_BILLION 1000000000
#define MAXBANKS 4 /* at most 4 dimm banks */
#define MAX_SPD_BYTES 256
#define NUMHALFCYCLES 4
@@ -670,22 +632,22 @@
#define FALSE 0
const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55}
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55}
};
@@ -696,14 +658,14 @@
unsigned long num_dimm_banks);
void check_mem_type
- (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
void check_volt_type
- (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+(unsigned long* dimm_populated,
+ unsigned char* iic0_dimm_addr,
+ unsigned long num_dimm_banks);
void program_cfg0(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
@@ -741,14 +703,14 @@
*/
long int spd_sdram(void) {
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
- unsigned long total_size;
- unsigned long cfg0;
- unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+ unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+ unsigned long total_size;
+ unsigned long cfg0;
+ unsigned long mcsts;
+ unsigned long num_dimm_banks; /* on board dimm banks */
- num_dimm_banks = sizeof(iic0_dimm_addr);
+ num_dimm_banks = sizeof(iic0_dimm_addr);
/*
* Make sure I2C controller is initialized
@@ -756,90 +718,90 @@
*/
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- /*
- * Read the SPD information using I2C interface. Check to see if the
- * DIMM slots are populated.
- */
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * Read the SPD information using I2C interface. Check to see if the
+ * DIMM slots are populated.
+ */
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * Check the memory type for the dimms plugged.
- */
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * Check the memory type for the dimms plugged.
+ */
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * Check the voltage type for the dimms plugged.
- */
- check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * Check the voltage type for the dimms plugged.
+ */
+ check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
#if defined(CONFIG_440_GX)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(sdr_srst, SDR0_SRST_DMC);
- mtsdr(sdr_srst, 0x00000000);
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(sdr_srst, SDR0_SRST_DMC);
+ mtsdr(sdr_srst, 0x00000000);
#endif
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG0)
- */
- program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG0)
+ */
+ program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG1)
- */
- program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * program 440GP SDRAM controller options (SDRAM0_CFG1)
+ */
+ program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * program SDRAM refresh register (SDRAM0_RTR)
- */
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * program SDRAM refresh register (SDRAM0_RTR)
+ */
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * program SDRAM Timing Register 0 (SDRAM0_TR0)
- */
- program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+ /*
+ * program SDRAM Timing Register 0 (SDRAM0_TR0)
+ */
+ program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
- /*
- * program the BxCR registers to find out total sdram installed
- */
- total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
- num_dimm_banks);
+ /*
+ * program the BxCR registers to find out total sdram installed
+ */
+ total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+ num_dimm_banks);
- /*
- * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
- */
- mtsdram(mem_clktr, 0x40000000);
+ /*
+ * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+ */
+ mtsdram(mem_clktr, 0x40000000);
- /*
- * delay to ensure 200 usec has elapsed
- */
- udelay(400);
+ /*
+ * delay to ensure 200 usec has elapsed
+ */
+ udelay(400);
- /*
- * enable the memory controller
- */
- mfsdram(mem_cfg0, cfg0);
- mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
+ /*
+ * enable the memory controller
+ */
+ mfsdram(mem_cfg0, cfg0);
+ mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
- /*
- * wait for SDRAM_CFG0_DC_EN to complete
- */
- while(1) {
- mfsdram(mem_mcsts, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
- break;
+ /*
+ * wait for SDRAM_CFG0_DC_EN to complete
+ */
+ while (1) {
+ mfsdram(mem_mcsts, mcsts);
+ if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
+ break;
+ }
}
- }
- /*
- * program SDRAM Timing Register 1, adding some delays
- */
- program_tr1();
+ /*
+ * program SDRAM Timing Register 1, adding some delays
+ */
+ program_tr1();
- /*
- * if ECC is enabled, initialize parity bits
- */
+ /*
+ * if ECC is enabled, initialize parity bits
+ */
return total_size;
}
@@ -847,76 +809,78 @@
unsigned char spd_read(uchar chip, uint addr) {
unsigned char data[2];
- if (i2c_read(chip, addr, 1, data, 1) == 0)
- return data[0];
- else
- return 0;
+ if (i2c_probe(chip) == 0) {
+ if (i2c_read(chip, addr, 1, data, 1) == 0) {
+ return data[0];
+ }
+ }
+
+ return 0;
}
void get_spd_info(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
#if 0
- printf("DIMM slot %lu: populated\n", dimm_num);
+ printf("DIMM slot %lu: populated\n", dimm_num);
#endif
- }
- else {
- dimm_populated[dimm_num] = FALSE;
+ } else {
+ dimm_populated[dimm_num] = FALSE;
#if 0
- printf("DIMM slot %lu: Not populated\n", dimm_num);
+ printf("DIMM slot %lu: Not populated\n", dimm_num);
#endif
+ }
}
- }
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- hang();
- }
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ hang();
+ }
}
void check_mem_type(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned char dimm_type;
+ unsigned long dimm_num;
+ unsigned char dimm_type;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 7:
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 7:
#if 0
- printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+ printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
#endif
- break;
- default:
- printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
- dimm_num);
- printf("Only DDR SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- break;
- }
+ break;
+ default:
+ printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+ dimm_num);
+ printf("Only DDR SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ }
+ }
}
- }
}
@@ -924,894 +888,877 @@
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long voltage_type;
+ unsigned long dimm_num;
+ unsigned long voltage_type;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (voltage_type != 0x04) {
- printf("ERROR: DIMM %lu with unsupported voltage level.\n",
- dimm_num);
- hang();
- }
- else {
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ if (voltage_type != 0x04) {
+ printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+ dimm_num);
+ hang();
+ } else {
#if 0
- printf("DIMM %lu voltage level supported.\n", dimm_num);
+ printf("DIMM %lu voltage level supported.\n", dimm_num);
#endif
- }
- break;
+ }
+ break;
+ }
}
- }
}
void program_cfg0(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long cfg0;
- unsigned long ecc_enabled;
- unsigned char ecc;
- unsigned char attributes;
- unsigned long data_width;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
+ unsigned long dimm_num;
+ unsigned long cfg0;
+ unsigned long ecc_enabled;
+ unsigned char ecc;
+ unsigned char attributes;
+ unsigned long data_width;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(mem_cfg0, cfg0);
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(mem_cfg0, cfg0);
- /*
- * clear bits
- */
- cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
- SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
- SDRAM_CFG0_DMWD_MASK |
- SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+ /*
+ * clear bits
+ */
+ cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+ SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+ SDRAM_CFG0_DMWD_MASK |
+ SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
- /*
- * FIXME: assume the DDR SDRAMs in both banks are the same
- */
- ecc_enabled = TRUE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) {
- ecc_enabled = FALSE;
- }
+ /*
+ * FIXME: assume the DDR SDRAMs in both banks are the same
+ */
+ ecc_enabled = TRUE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) {
+ ecc_enabled = FALSE;
+ }
- /*
- * program Registered DIMM Enable
- */
- attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
- if ((attributes & 0x02) != 0x00) {
- cfg0 |= SDRAM_CFG0_RDEN;
- }
+ /*
+ * program Registered DIMM Enable
+ */
+ attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+ if ((attributes & 0x02) != 0x00) {
+ cfg0 |= SDRAM_CFG0_RDEN;
+ }
- /*
- * program DDR SDRAM Data Width
- */
- data_width =
- (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
- if (data_width == 64 || data_width == 72) {
- dimm_64bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_64;
- }
- else if (data_width == 32 || data_width == 40) {
- dimm_32bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_32;
- }
- else {
- printf("WARNING: DIMM with datawidth of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- hang();
- }
- break;
+ /*
+ * program DDR SDRAM Data Width
+ */
+ data_width =
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+ if (data_width == 64 || data_width == 72) {
+ dimm_64bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_64;
+ } else if (data_width == 32 || data_width == 40) {
+ dimm_32bit = TRUE;
+ cfg0 |= SDRAM_CFG0_DMWD_32;
+ } else {
+ printf("WARNING: DIMM with datawidth of %lu bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+ hang();
+ }
+ break;
+ }
}
- }
- /*
- * program Memory Data Error Checking
- */
- if (ecc_enabled == TRUE) {
- cfg0 |= SDRAM_CFG0_MCHK_GEN;
- }
- else {
- cfg0 |= SDRAM_CFG0_MCHK_NON;
- }
+ /*
+ * program Memory Data Error Checking
+ */
+ if (ecc_enabled == TRUE) {
+ cfg0 |= SDRAM_CFG0_MCHK_GEN;
+ } else {
+ cfg0 |= SDRAM_CFG0_MCHK_NON;
+ }
- /*
- * program Page Management Unit
- */
- cfg0 |= SDRAM_CFG0_PMUD;
+ /*
+ * program Page Management Unit
+ */
+ cfg0 |= SDRAM_CFG0_PMUD;
- /*
- * program Memory Controller Options 0
- * Note: DCEN must be enabled after all DDR SDRAM controller
- * configuration registers get initialized.
- */
- mtsdram(mem_cfg0, cfg0);
+ /*
+ * program Memory Controller Options 0
+ * Note: DCEN must be enabled after all DDR SDRAM controller
+ * configuration registers get initialized.
+ */
+ mtsdram(mem_cfg0, cfg0);
}
void program_cfg1(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long cfg1;
- mfsdram(mem_cfg1, cfg1);
+ unsigned long cfg1;
+ mfsdram(mem_cfg1, cfg1);
- /*
- * Self-refresh exit, disable PM
- */
- cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+ /*
+ * Self-refresh exit, disable PM
+ */
+ cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
- /*
- * program Memory Controller Options 1
- */
- mtsdram(mem_cfg1, cfg1);
+ /*
+ * program Memory Controller Options 1
+ */
+ mtsdram(mem_cfg1, cfg1);
}
void program_rtr (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long bus_period_x_10;
- unsigned long refresh_rate = 0;
- unsigned char refresh_rate_type;
- unsigned long refresh_interval;
- unsigned long sdram_rtr;
- PPC440_SYS_INFO sys_info;
+ unsigned long dimm_num;
+ unsigned long bus_period_x_10;
+ unsigned long refresh_rate = 0;
+ unsigned char refresh_rate_type;
+ unsigned long refresh_interval;
+ unsigned long sdram_rtr;
+ PPC440_SYS_INFO sys_info;
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
- switch (refresh_rate_type) {
- case 0x00:
- refresh_rate = 15625;
- break;
- case 0x01:
- refresh_rate = 15625/4;
- break;
- case 0x02:
- refresh_rate = 15625/2;
- break;
- case 0x03:
- refresh_rate = 15626*2;
- break;
- case 0x04:
- refresh_rate = 15625*4;
- break;
- case 0x05:
- refresh_rate = 15625*8;
- break;
- default:
- printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
- dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n");
- break;
- }
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+ switch (refresh_rate_type) {
+ case 0x00:
+ refresh_rate = 15625;
+ break;
+ case 0x01:
+ refresh_rate = 15625/4;
+ break;
+ case 0x02:
+ refresh_rate = 15625/2;
+ break;
+ case 0x03:
+ refresh_rate = 15626*2;
+ break;
+ case 0x04:
+ refresh_rate = 15625*4;
+ break;
+ case 0x05:
+ refresh_rate = 15625*8;
+ break;
+ default:
+ printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+ dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n");
+ break;
+ }
- break;
+ break;
+ }
}
- }
- refresh_interval = refresh_rate * 10 / bus_period_x_10;
- sdram_rtr = (refresh_interval & 0x3ff8) << 16;
+ refresh_interval = refresh_rate * 10 / bus_period_x_10;
+ sdram_rtr = (refresh_interval & 0x3ff8) << 16;
- /*
- * program Refresh Timer Register (SDRAM0_RTR)
- */
- mtsdram(mem_rtr, sdram_rtr);
+ /*
+ * program Refresh Timer Register (SDRAM0_RTR)
+ */
+ mtsdram(mem_rtr, sdram_rtr);
}
void program_tr0 (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long tr0;
- unsigned char wcsbc;
- unsigned char t_rp_ns;
- unsigned char t_rcd_ns;
- unsigned char t_ras_ns;
- unsigned long t_rp_clk;
- unsigned long t_ras_rcd_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rfc_clk;
- unsigned long plb_check;
- unsigned char cas_bit;
- unsigned long cas_index;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned long cycle_time_ns_x_10[3];
- unsigned long tcyc_3_0_ns_x_10;
- unsigned long tcyc_2_5_ns_x_10;
- unsigned long tcyc_2_0_ns_x_10;
- unsigned long tcyc_reg;
- unsigned long bus_period_x_10;
- PPC440_SYS_INFO sys_info;
- unsigned long residue;
+ unsigned long dimm_num;
+ unsigned long tr0;
+ unsigned char wcsbc;
+ unsigned char t_rp_ns;
+ unsigned char t_rcd_ns;
+ unsigned char t_ras_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_ras_rcd_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rfc_clk;
+ unsigned long plb_check;
+ unsigned char cas_bit;
+ unsigned long cas_index;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned long cycle_time_ns_x_10[3];
+ unsigned long tcyc_3_0_ns_x_10;
+ unsigned long tcyc_2_5_ns_x_10;
+ unsigned long tcyc_2_0_ns_x_10;
+ unsigned long tcyc_reg;
+ unsigned long bus_period_x_10;
+ PPC440_SYS_INFO sys_info;
+ unsigned long residue;
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(mem_tr0, tr0);
- tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
- SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
- SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
- SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(mem_tr0, tr0);
+ tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+ SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+ SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+ SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
- /*
- * initialization
- */
- wcsbc = 0;
- t_rp_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- tcyc_2_0_ns_x_10 = 0;
- tcyc_2_5_ns_x_10 = 0;
- tcyc_3_0_ns_x_10 = 0;
+ /*
+ * initialization
+ */
+ wcsbc = 0;
+ t_rp_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ tcyc_2_0_ns_x_10 = 0;
+ tcyc_2_5_ns_x_10 = 0;
+ tcyc_3_0_ns_x_10 = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
- t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
- t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+ t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+ t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+ t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
- if ((tcyc_reg & 0x0F) >= 10) {
- printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
- dimm_num);
- hang();
- }
+ if ((tcyc_reg & 0x0F) >= 10) {
+ printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+ dimm_num);
+ hang();
+ }
- cycle_time_ns_x_10[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
- }
+ cycle_time_ns_x_10[cas_index] =
+ (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+ }
- cas_index = 0;
+ cas_index = 0;
- if ((cas_bit & 0x80) != 0) {
- cas_index += 3;
- }
- else if ((cas_bit & 0x40) != 0) {
- cas_index += 2;
- }
- else if ((cas_bit & 0x20) != 0) {
- cas_index += 1;
- }
+ if ((cas_bit & 0x80) != 0) {
+ cas_index += 3;
+ } else if ((cas_bit & 0x40) != 0) {
+ cas_index += 2;
+ } else if ((cas_bit & 0x20) != 0) {
+ cas_index += 1;
+ }
- if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
- tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- }
- else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_3_0_available = FALSE;
- }
+ if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+ tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_3_0_available = FALSE;
+ }
- if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
- tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- }
- else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_5_available = FALSE;
- }
+ if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+ tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_5_available = FALSE;
+ }
- if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
- tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- }
- else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_0_available = FALSE;
- }
+ if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+ tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+ cas_index++;
+ } else {
+ if (cas_index != 0) {
+ cas_index++;
+ }
+ cas_2_0_available = FALSE;
+ }
- break;
+ break;
+ }
}
- }
- /*
- * Program SD_WR and SD_WCSBC fields
- */
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
- switch (wcsbc) {
- case 0:
- tr0 |= SDRAM_TR0_SDWD_0_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDWD_1_CLK;
- break;
- }
+ /*
+ * Program SD_WR and SD_WCSBC fields
+ */
+ tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
+ switch (wcsbc) {
+ case 0:
+ tr0 |= SDRAM_TR0_SDWD_0_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDWD_1_CLK;
+ break;
+ }
- /*
- * Program SD_CASL field
- */
- if ((cas_2_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
- }
- else if((cas_2_5_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
- }
- else if((cas_3_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
- }
- else {
- printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
- printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range.\n");
- hang();
- }
+ /*
+ * Program SD_CASL field
+ */
+ if ((cas_2_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+ } else if ((cas_2_5_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+ } else if ((cas_3_0_available == TRUE) &&
+ (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+ tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+ } else {
+ printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+ printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range.\n");
+ hang();
+ }
- /*
- * Calculate Trp in clock cycles and round up if necessary
- * Program SD_PTA field
- */
- t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rp_clk++;
- }
- switch ((unsigned long)t_rp_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDPA_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDPA_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDPA_4_CLK;
- break;
- }
+ /*
+ * Calculate Trp in clock cycles and round up if necessary
+ * Program SD_PTA field
+ */
+ t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rp_clk++;
+ }
+ switch ((unsigned long)t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDPA_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDPA_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDPA_4_CLK;
+ break;
+ }
- /*
- * Program SD_CTP field
- */
- t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
- plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
- if (sys_info.freqPLB != plb_check) {
- t_ras_rcd_clk++;
- }
- switch (t_ras_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDCP_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDCP_3_CLK;
- break;
- case 4:
- tr0 |= SDRAM_TR0_SDCP_4_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDCP_5_CLK;
- break;
- }
+ /*
+ * Program SD_CTP field
+ */
+ t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+ plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+ if (sys_info.freqPLB != plb_check) {
+ t_ras_rcd_clk++;
+ }
+ switch (t_ras_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDCP_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDCP_3_CLK;
+ break;
+ case 4:
+ tr0 |= SDRAM_TR0_SDCP_4_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDCP_5_CLK;
+ break;
+ }
- /*
- * Program SD_LDF field
- */
- tr0 |= SDRAM_TR0_SDLD_2_CLK;
+ /*
+ * Program SD_LDF field
+ */
+ tr0 |= SDRAM_TR0_SDLD_2_CLK;
- /*
- * Program SD_RFTA field
- * FIXME tRFC hardcoded as 75 nanoseconds
- */
- t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
- residue = sys_info.freqPLB % (ONE_BILLION / 75);
- if (residue >= (ONE_BILLION / 150)) {
- t_rfc_clk++;
- }
- switch (t_rfc_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- tr0 |= SDRAM_TR0_SDRA_6_CLK;
- break;
- case 7:
- tr0 |= SDRAM_TR0_SDRA_7_CLK;
- break;
- case 8:
- tr0 |= SDRAM_TR0_SDRA_8_CLK;
- break;
- case 9:
- tr0 |= SDRAM_TR0_SDRA_9_CLK;
- break;
- case 10:
- tr0 |= SDRAM_TR0_SDRA_10_CLK;
- break;
- case 11:
- tr0 |= SDRAM_TR0_SDRA_11_CLK;
- break;
- case 12:
- tr0 |= SDRAM_TR0_SDRA_12_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRA_13_CLK;
- break;
- }
+ /*
+ * Program SD_RFTA field
+ * FIXME tRFC hardcoded as 75 nanoseconds
+ */
+ t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+ residue = sys_info.freqPLB % (ONE_BILLION / 75);
+ if (residue >= (ONE_BILLION / 150)) {
+ t_rfc_clk++;
+ }
+ switch (t_rfc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ tr0 |= SDRAM_TR0_SDRA_6_CLK;
+ break;
+ case 7:
+ tr0 |= SDRAM_TR0_SDRA_7_CLK;
+ break;
+ case 8:
+ tr0 |= SDRAM_TR0_SDRA_8_CLK;
+ break;
+ case 9:
+ tr0 |= SDRAM_TR0_SDRA_9_CLK;
+ break;
+ case 10:
+ tr0 |= SDRAM_TR0_SDRA_10_CLK;
+ break;
+ case 11:
+ tr0 |= SDRAM_TR0_SDRA_11_CLK;
+ break;
+ case 12:
+ tr0 |= SDRAM_TR0_SDRA_12_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRA_13_CLK;
+ break;
+ }
- /*
- * Program SD_RCD field
- */
- t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rcd_clk++;
- }
- switch (t_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDRD_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDRD_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRD_4_CLK;
- break;
- }
+ /*
+ * Program SD_RCD field
+ */
+ t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+ plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+ if (sys_info.freqPLB != plb_check) {
+ t_rcd_clk++;
+ }
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ case 2:
+ tr0 |= SDRAM_TR0_SDRD_2_CLK;
+ break;
+ case 3:
+ tr0 |= SDRAM_TR0_SDRD_3_CLK;
+ break;
+ default:
+ tr0 |= SDRAM_TR0_SDRD_4_CLK;
+ break;
+ }
#if 0
- printf("tr0: %x\n", tr0);
+ printf("tr0: %x\n", tr0);
#endif
- mtsdram(mem_tr0, tr0);
+ mtsdram(mem_tr0, tr0);
}
void program_tr1 (void)
{
- unsigned long tr0;
- unsigned long tr1;
- unsigned long cfg0;
- unsigned long ecc_temp;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long i, j, k;
- unsigned long bxcr_num;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- unsigned long rdclt;
- unsigned long rdclt_offset;
- long max_start;
- long max_end;
- long rdclt_average;
- unsigned char window_found;
- unsigned char fail_found;
- unsigned char pass_found;
- unsigned long * membase;
- PPC440_SYS_INFO sys_info;
+ unsigned long tr0;
+ unsigned long tr1;
+ unsigned long cfg0;
+ unsigned long ecc_temp;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long i, j, k;
+ unsigned long bxcr_num;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ unsigned long rdclt;
+ unsigned long rdclt_offset;
+ long max_start;
+ long max_end;
+ long rdclt_average;
+ unsigned char window_found;
+ unsigned char fail_found;
+ unsigned char pass_found;
+ unsigned long * membase;
+ PPC440_SYS_INFO sys_info;
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(mem_tr1, tr1);
- tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
- SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+ /*
+ * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+ */
+ mfsdram(mem_tr1, tr1);
+ tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+ SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
- mfsdram(mem_tr0, tr0);
- if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
- (sys_info.freqPLB > 100000000)) {
- tr1 |= SDRAM_TR1_RDSS_TR2;
- tr1 |= SDRAM_TR1_RDSL_STAGE3;
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- }
- else {
- tr1 |= SDRAM_TR1_RDSS_TR1;
- tr1 |= SDRAM_TR1_RDSL_STAGE2;
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
+ mfsdram(mem_tr0, tr0);
+ if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+ (sys_info.freqPLB > 100000000)) {
+ tr1 |= SDRAM_TR1_RDSS_TR2;
+ tr1 |= SDRAM_TR1_RDSL_STAGE3;
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDSS_TR1;
+ tr1 |= SDRAM_TR1_RDSL_STAGE2;
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
- /*
- * save CFG0 ECC setting to a temporary variable and turn ECC off
- */
- mfsdram(mem_cfg0, cfg0);
- ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+ /*
+ * save CFG0 ECC setting to a temporary variable and turn ECC off
+ */
+ mfsdram(mem_cfg0, cfg0);
+ ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
- /*
- * get the delay line calibration register value
- */
- mfsdram(mem_dlycal, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(mem_dlycal, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- rdclt_offset = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ rdclt_offset = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
#ifdef DEBUG
- printf("Starting memory test ");
+ printf("Starting memory test ");
#endif
- for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
- /*
- * Set the timing reg for the test.
- */
- mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+ for (k = 0; k < NUMHALFCYCLES; k++) {
+ for (rdclt = 0; rdclt < dly_val; rdclt++) {
+ /*
+ * Set the timing reg for the test.
+ */
+ mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
- if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
+ if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+ /* Bank is enabled */
+ membase = (unsigned long*)
+ (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
+ /*
+ * Run the short memory test
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- break;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((unsigned long)&(membase[j]));
+ break;
+ }
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
- if (j < NUMMEMWORDS) {
- break;
- }
- }
+ if (j < NUMMEMWORDS) {
+ break;
+ }
+ }
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS) {
- break;
- }
- }
- }
+ /*
+ * see if the rdclt value passed
+ */
+ if (i < NUMMEMTESTS) {
+ break;
+ }
+ }
+ }
- if (bxcr_num == MAXBXCR) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0) {
- current_start = rdclt_offset + rdclt;
- }
+ if (bxcr_num == MAXBXCR) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0) {
+ current_start = rdclt_offset + rdclt;
+ }
- current_fail_length = 0;
- current_pass_length++;
+ current_fail_length = 0;
+ current_pass_length++;
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rdclt_offset + rdclt;
- }
- }
- }
- else {
- current_pass_length = 0;
- current_fail_length++;
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rdclt_offset + rdclt;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
- if (current_fail_length >= (dly_val>>2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- }
- else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
+ if (current_fail_length >= (dly_val>>2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
}
- }
- }
#ifdef DEBUG
- printf(".");
+ printf(".");
#endif
- if (window_found == TRUE) {
- break;
- }
+ if (window_found == TRUE) {
+ break;
+ }
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- rdclt_offset += dly_val;
- }
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ rdclt_offset += dly_val;
+ }
#ifdef DEBUG
- printf("\n");
+ printf("\n");
#endif
- /*
- * make sure we find the window
- */
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay.\n");
- hang();
- }
+ /*
+ * make sure we find the window
+ */
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay.\n");
+ hang();
+ }
- /*
- * restore the orignal ECC setting
- */
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+ /*
+ * restore the orignal ECC setting
+ */
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
- /*
- * set the SDRAM TR1 RDCD value
- */
- tr1 &= ~SDRAM_TR1_RDCD_MASK;
- if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- }
- else {
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
+ /*
+ * set the SDRAM TR1 RDCD value
+ */
+ tr1 &= ~SDRAM_TR1_RDCD_MASK;
+ if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+ tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+ } else {
+ tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+ }
- /*
- * set the SDRAM TR1 RDCLT value
- */
- tr1 &= ~SDRAM_TR1_RDCT_MASK;
- while (max_end >= (dly_val<<1)) {
- max_end -= (dly_val<<1);
- max_start -= (dly_val<<1);
- }
+ /*
+ * set the SDRAM TR1 RDCLT value
+ */
+ tr1 &= ~SDRAM_TR1_RDCT_MASK;
+ while (max_end >= (dly_val << 1)) {
+ max_end -= (dly_val << 1);
+ max_start -= (dly_val << 1);
+ }
- rdclt_average = ((max_start + max_end) >> 1);
- if (rdclt_average >= 0x60)
- while(1);
+ rdclt_average = ((max_start + max_end) >> 1);
+ if (rdclt_average >= 0x60)
+ while (1)
+ ;
- if (rdclt_average < 0) {
- rdclt_average = 0;
- }
+ if (rdclt_average < 0) {
+ rdclt_average = 0;
+ }
- if (rdclt_average >= dly_val) {
- rdclt_average -= dly_val;
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- }
- tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+ if (rdclt_average >= dly_val) {
+ rdclt_average -= dly_val;
+ tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+ }
+ tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
#if 0
- printf("tr1: %x\n", tr1);
+ printf("tr1: %x\n", tr1);
#endif
- /*
- * program SDRAM Timing Register 1 TR1
- */
- mtsdram(mem_tr1, tr1);
+ /*
+ * program SDRAM Timing Register 1 TR1
+ */
+ mtsdram(mem_tr1, tr1);
}
unsigned long program_bxcr(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
unsigned long num_dimm_banks)
{
- unsigned long dimm_num;
- unsigned long bxcr_num;
- unsigned long bank_base_addr;
- unsigned long bank_size_bytes;
- unsigned long cr;
- unsigned long i;
- unsigned long temp;
- unsigned char num_row_addr;
- unsigned char num_col_addr;
- unsigned char num_banks;
- unsigned char bank_size_id;
+ unsigned long dimm_num;
+ unsigned long bxcr_num;
+ unsigned long bank_base_addr;
+ unsigned long bank_size_bytes;
+ unsigned long cr;
+ unsigned long i;
+ unsigned long temp;
+ unsigned char num_row_addr;
+ unsigned char num_col_addr;
+ unsigned char num_banks;
+ unsigned char bank_size_id;
- /*
- * Set the BxCR regs. First, wipe out the bank config registers.
- */
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
- mtdcr(memcfgd, 0x00000000);
- }
+ /*
+ * Set the BxCR regs. First, wipe out the bank config registers.
+ */
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
+ mtdcr(memcfgd, 0x00000000);
+ }
- /*
- * reset the bank_base address
- */
- bank_base_addr = CFG_SDRAM_BASE;
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CFG_SDRAM_BASE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
- bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
- /*
- * Set the SDRAM0_BxCR regs
- */
- cr = 0;
- bank_size_bytes = 4 * 1024 * 1024 * bank_size_id;
- switch (bank_size_id) {
- case 0x02:
- cr |= SDRAM_BXCR_SDSZ_8;
- break;
- case 0x04:
- cr |= SDRAM_BXCR_SDSZ_16;
- break;
- case 0x08:
- cr |= SDRAM_BXCR_SDSZ_32;
- break;
- case 0x10:
- cr |= SDRAM_BXCR_SDSZ_64;
- break;
- case 0x20:
- cr |= SDRAM_BXCR_SDSZ_128;
- break;
- case 0x40:
- cr |= SDRAM_BXCR_SDSZ_256;
- break;
- case 0x80:
- cr |= SDRAM_BXCR_SDSZ_512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- bank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- }
+ /*
+ * Set the SDRAM0_BxCR regs
+ */
+ cr = 0;
+ bank_size_bytes = 4 * 1024 * 1024 * bank_size_id;
+ switch (bank_size_id) {
+ case 0x02:
+ cr |= SDRAM_BXCR_SDSZ_8;
+ break;
+ case 0x04:
+ cr |= SDRAM_BXCR_SDSZ_16;
+ break;
+ case 0x08:
+ cr |= SDRAM_BXCR_SDSZ_32;
+ break;
+ case 0x10:
+ cr |= SDRAM_BXCR_SDSZ_64;
+ break;
+ case 0x20:
+ cr |= SDRAM_BXCR_SDSZ_128;
+ break;
+ case 0x40:
+ cr |= SDRAM_BXCR_SDSZ_256;
+ break;
+ case 0x80:
+ cr |= SDRAM_BXCR_SDSZ_512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ bank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
- switch (num_col_addr) {
- case 0x08:
- cr |= SDRAM_BXCR_SDAM_1;
- break;
- case 0x09:
- cr |= SDRAM_BXCR_SDAM_2;
- break;
- case 0x0A:
- cr |= SDRAM_BXCR_SDAM_3;
- break;
- case 0x0B:
- cr |= SDRAM_BXCR_SDAM_4;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- hang();
- }
+ switch (num_col_addr) {
+ case 0x08:
+ cr |= SDRAM_BXCR_SDAM_1;
+ break;
+ case 0x09:
+ cr |= SDRAM_BXCR_SDAM_2;
+ break;
+ case 0x0A:
+ cr |= SDRAM_BXCR_SDAM_3;
+ break;
+ case 0x0B:
+ cr |= SDRAM_BXCR_SDAM_4;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+ dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
- /*
- * enable the bank
- */
- cr |= SDRAM_BXCR_SDBE;
+ /*
+ * enable the bank
+ */
+ cr |= SDRAM_BXCR_SDBE;
- /*------------------------------------------------------------------
- | This next section is hardware dependent and must be programmed
- | to match the hardware.
- +-----------------------------------------------------------------*/
- if (dimm_num == 0) {
- for (i = 0; i < num_banks; i++) {
- mtdcr(memcfga, mem_b0cr + (i << 2));
- temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
- SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK |
- SDRAM_BXCR_SDBE);
- cr |= temp;
- cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
- mtdcr(memcfgd, cr);
- bank_base_addr += bank_size_bytes;
- }
- }
- else {
- for (i = 0; i < num_banks; i++) {
- mtdcr(memcfga, mem_b2cr + (i << 2));
- temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
- SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK |
- SDRAM_BXCR_SDBE);
- cr |= temp;
- cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
- mtdcr(memcfgd, cr);
- bank_base_addr += bank_size_bytes;
+ /*------------------------------------------------------------------
+ | This next section is hardware dependent and must be programmed
+ | to match the hardware.
+ +-----------------------------------------------------------------*/
+ if (dimm_num == 0) {
+ for (i = 0; i < num_banks; i++) {
+ mtdcr(memcfga, mem_b0cr + (i << 2));
+ temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+ SDRAM_BXCR_SDSZ_MASK |
+ SDRAM_BXCR_SDAM_MASK |
+ SDRAM_BXCR_SDBE);
+ cr |= temp;
+ cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+ mtdcr(memcfgd, cr);
+ bank_base_addr += bank_size_bytes;
+ }
+ } else {
+ for (i = 0; i < num_banks; i++) {
+ mtdcr(memcfga, mem_b2cr + (i << 2));
+ temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+ SDRAM_BXCR_SDSZ_MASK |
+ SDRAM_BXCR_SDAM_MASK |
+ SDRAM_BXCR_SDBE);
+ cr |= temp;
+ cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+ mtdcr(memcfgd, cr);
+ bank_base_addr += bank_size_bytes;
+ }
+ }
}
- }
}
- }
- return(bank_base_addr);
+ return(bank_base_addr);
}
void program_ecc (unsigned long num_bytes)
{
- unsigned long bank_base_addr;
- unsigned long current_address;
- unsigned long end_address;
- unsigned long address_increment;
- unsigned long cfg0;
+ unsigned long bank_base_addr;
+ unsigned long current_address;
+ unsigned long end_address;
+ unsigned long address_increment;
+ unsigned long cfg0;
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(mem_cfg0, cfg0);
+ /*
+ * get Memory Controller Options 0 data
+ */
+ mfsdram(mem_cfg0, cfg0);
- /*
- * reset the bank_base address
- */
- bank_base_addr = CFG_SDRAM_BASE;
+ /*
+ * reset the bank_base address
+ */
+ bank_base_addr = CFG_SDRAM_BASE;
- if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
- SDRAM_CFG0_MCHK_GEN);
+ if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+ SDRAM_CFG0_MCHK_GEN);
- if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
- address_increment = 4;
- }
- else {
- address_increment = 8;
- }
+ if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
+ address_increment = 4;
+ } else {
+ address_increment = 8;
+ }
- current_address = (unsigned long)(bank_base_addr);
- end_address = (unsigned long)(bank_base_addr) + num_bytes;
+ current_address = (unsigned long)(bank_base_addr);
+ end_address = (unsigned long)(bank_base_addr) + num_bytes;
- while (current_address < end_address) {
- *((unsigned long*)current_address) = 0x00000000;
- current_address += address_increment;
- }
+ while (current_address < end_address) {
+ *((unsigned long*)current_address) = 0x00000000;
+ current_address += address_increment;
+ }
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
- SDRAM_CFG0_MCHK_CHK);
- }
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+ SDRAM_CFG0_MCHK_CHK);
+ }
}
#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 0d6d88a..7a4af75 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -194,7 +194,96 @@
#elif defined(CONFIG_440)
-#if !defined(CONFIG_440_GX)
+
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+void get_sys_info (sys_info_t *sysInfo)
+{
+ unsigned long temp;
+ unsigned long reg;
+ unsigned long lfdiv;
+ unsigned long m;
+ unsigned long prbdv0;
+ /*
+ WARNING: ASSUMES the following:
+ ENG=1
+ PRADV0=1
+ PRBDV0=1
+ */
+
+ /* Decode CPR0_PLLD0 for divisors */
+ mfclk(clk_plld, reg);
+ temp = (reg & PLLD_FWDVA_MASK) >> 16;
+ sysInfo->pllFwdDivA = temp ? temp : 16;
+ temp = (reg & PLLD_FWDVB_MASK) >> 8;
+ sysInfo->pllFwdDivB = temp ? temp: 8 ;
+ temp = (reg & PLLD_FBDV_MASK) >> 24;
+ sysInfo->pllFbkDiv = temp ? temp : 32;
+ lfdiv = reg & PLLD_LFBDV_MASK;
+
+ mfclk(clk_opbd, reg);
+ temp = (reg & OPBDDV_MASK) >> 24;
+ sysInfo->pllOpbDiv = temp ? temp : 4;
+
+ mfclk(clk_perd, reg);
+ temp = (reg & PERDV_MASK) >> 24;
+ sysInfo->pllExtBusDiv = temp ? temp : 8;
+
+ mfclk(clk_primbd, reg);
+ temp = (reg & PRBDV_MASK) >> 24;
+ prbdv0 = temp ? temp : 8;
+
+ mfclk(clk_spcid, reg);
+ temp = (reg & SPCID_MASK) >> 24;
+ sysInfo->pllPciDiv = temp ? temp : 4;
+
+ /* Calculate 'M' based on feedback source */
+ mfsdr(sdr_sdstp0, reg);
+ temp = (reg & PLLSYS0_SEL_MASK) >> 27;
+ if (temp == 0) { /* PLL output */
+ /* Figure which pll to use */
+ mfclk(clk_pllc, reg);
+ temp = (reg & PLLC_SRC_MASK) >> 29;
+ if (!temp) /* PLLOUTA */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
+ else /* PLLOUTB */
+ m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
+ }
+ else if (temp == 1) /* CPU output */
+ m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+ else /* PerClk */
+ m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+
+ /* Now calculate the individual clocks */
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+ sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
+ sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+ sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
+ sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
+
+ /* Figure which timer source to use */
+ if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
+ if (CONFIG_SYS_CLK_FREQ > temp)
+ sysInfo->freqTmrClk = temp;
+ else
+ sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
+ }
+ else /* Internal clock */
+ sysInfo->freqTmrClk = sysInfo->freqProcessor;
+}
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+ sys_info_t sys_info;
+ get_sys_info (&sys_info);
+ return sys_info.freqPCI;
+}
+
+#elif !defined(CONFIG_440_GX)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
@@ -220,8 +309,8 @@
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
+ if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+ sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 3473baa..3a8ff2b 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -344,7 +344,7 @@
lis r1,0x0002 /* set CE bit (Critical Exceptions) */
ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
mtmsr r1 /* change MSR */
-#else
+#elif !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
bl __440gx_msr_set
b __440gx_msr_continue
@@ -377,6 +377,21 @@
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ /* Clear Dcache to use as RAM */
+ lis r3,CFG_INIT_RAM_ADDR@h
+ li r4,CFG_INIT_RAM_END@l
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ran
+ addi r5,r5,0x0001
+..d_ran:
+ mtctr r5
+..d_ag:
+ dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag
+#else
#if defined (CONFIG_440_GX)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
@@ -408,6 +423,7 @@
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
#endif
+#endif
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
@@ -957,7 +973,7 @@
invalidate_dcache:
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
#else
@@ -983,7 +999,7 @@
mtdccr r10
/* do loop for # of congruence classes. */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */
ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
@@ -1210,6 +1226,15 @@
*/
.globl relocate_code
relocate_code:
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ dccci 0,0 /* Invalidate data cache, now no longer our stack */
+ sync
+ addi r1,r0,0x0000 /* Tlb entry #0 */
+ tlbre r0,r1,0x0002 /* Read contents */
+ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
+ tlbwe r0,r1,0x0002 /* Save it out */
+ isync
+#endif
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Init Data pointer */
mr r10, r5 /* Save copy of Destination Address */
@@ -1433,7 +1458,7 @@
#ifdef CONFIG_405EP
ppc405ep_init:
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
/*
* Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
* function) to support FPGA and NVRAM accesses below.
@@ -1513,7 +1538,7 @@
#endif
addi r3,0,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
/*
!-----------------------------------------------------------------------
! Check FPGA for PCI internal/external arbitration
@@ -1548,7 +1573,7 @@
/* and CPU has been reset */
/* so skip to next section */
-#ifdef CONFIG_BUBINGA405EP
+#ifdef CONFIG_BUBINGA
/*
!-----------------------------------------------------------------------
! Read NVRAM to get value to write in PLLMR.
@@ -1583,7 +1608,7 @@
cmpi cr0,0,r5,1 /* See if PLL is locked */
beq pll_write
..no_pllset:
-#endif /* CONFIG_BUBINGA405EP */
+#endif /* CONFIG_BUBINGA */
addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
ori r3,r3,PLLMR0_DEFAULT@l /* */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
new file mode 100644
index 0000000..d53909e
--- /dev/null
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -0,0 +1,1642 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
+ *
+ * (C) Copyright 2003-2004
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
+ *
+ * Note: Much of this code has been derived from Linux 2.4
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - this driver is intended for use with USB Mass Storage Devices
+ * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_OHCI
+
+#include <malloc.h>
+#include <usb.h>
+#include "usb_ohci.h"
+
+#include "usbdev.h"
+
+#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+ (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#define readl(a) (*((vu_long *)(a)))
+#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+#ifdef CONFIG_440_EP
+#define ohci_cpu_to_le16(x) (x)
+#define ohci_cpu_to_le32(x) (x)
+#else
+#define ohci_cpu_to_le16(x) swap_16(x)
+#define ohci_cpu_to_le32(x) swap_32(x)
+#endif
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+/* flag guarding URB transation */
+int urb_finished = 0;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = readl (&hc->regs->roothub.register); \
+ if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = readl (&hc->regs->roothub.register); \
+ temp; })
+
+static u32 roothub_a (struct ohci *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+ { return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+ { return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+ int i;
+ int last;
+ struct td * td;
+
+ last = urb->length - 1;
+ if (last >= 0) {
+ for (i = 0; i <= last; i++) {
+ td = urb->td[i];
+ if (td) {
+ td->usb_dev = NULL;
+ urb->td[i] = NULL;
+ }
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+ int transfer_len, struct devrequest * setup, char * str, int small)
+{
+ urb_priv_t * purb = &urb_priv;
+
+ dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+ str,
+ sohci_get_current_frame_number (dev),
+ usb_pipedevice (pipe),
+ usb_pipeendpoint (pipe),
+ usb_pipeout (pipe)? 'O': 'I',
+ usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+ (usb_pipecontrol (pipe)? "CTRL": "BULK"),
+ purb->actual_length,
+ transfer_len, dev->status);
+#ifdef OHCI_VERBOSE_DEBUG
+ if (!small) {
+ int i, len;
+
+ if (usb_pipecontrol (pipe)) {
+ printf (__FILE__ ": cmd(8):");
+ for (i = 0; i < 8 ; i++)
+ printf (" %02x", ((__u8 *) setup) [i]);
+ printf ("\n");
+ }
+ if (transfer_len > 0 && buffer) {
+ printf (__FILE__ ": data(%d/%d):",
+ purb->actual_length,
+ transfer_len);
+ len = usb_pipeout (pipe)?
+ transfer_len: purb->actual_length;
+ for (i = 0; i < 16 && i < len; i++)
+ printf (" %02x", ((__u8 *) buffer) [i]);
+ printf ("%s\n", i < len? "...": "");
+ }
+ }
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+ int i, j;
+ __u32 * ed_p;
+ for (i= 0; i < 32; i++) {
+ j = 5;
+ ed_p = &(ohci->hcca->int_table [i]);
+ if (*ed_p == 0)
+ continue;
+ printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+ while (*ed_p != 0 && j--) {
+ ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
+ printf (" ed: %4x;", ed->hwINFO);
+ ed_p = &ed->hwNextED;
+ }
+ printf ("\n");
+ }
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+ dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+ label,
+ mask,
+ (mask & OHCI_INTR_MIE) ? " MIE" : "",
+ (mask & OHCI_INTR_OC) ? " OC" : "",
+ (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+ (mask & OHCI_INTR_FNO) ? " FNO" : "",
+ (mask & OHCI_INTR_UE) ? " UE" : "",
+ (mask & OHCI_INTR_RD) ? " RD" : "",
+ (mask & OHCI_INTR_SF) ? " SF" : "",
+ (mask & OHCI_INTR_WDH) ? " WDH" : "",
+ (mask & OHCI_INTR_SO) ? " SO" : ""
+ );
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+ ed_t *edp = (ed_t *)value;
+
+ if (value) {
+ dbg ("%s %08x", label, value);
+ dbg ("%08x", edp->hwINFO);
+ dbg ("%08x", edp->hwTailP);
+ dbg ("%08x", edp->hwHeadP);
+ dbg ("%08x", edp->hwNextED);
+ }
+}
+
+static char * hcfs2string (int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET: return "reset";
+ case OHCI_USB_RESUME: return "resume";
+ case OHCI_USB_OPER: return "operational";
+ case OHCI_USB_SUSPEND: return "suspend";
+ }
+ return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+ struct ohci_regs *regs = controller->regs;
+ __u32 temp;
+
+ temp = readl (®s->revision) & 0xff;
+ if (temp != 0x10)
+ dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+ temp = readl (®s->control);
+ dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+ (temp & OHCI_CTRL_RWE) ? " RWE" : "",
+ (temp & OHCI_CTRL_RWC) ? " RWC" : "",
+ (temp & OHCI_CTRL_IR) ? " IR" : "",
+ hcfs2string (temp & OHCI_CTRL_HCFS),
+ (temp & OHCI_CTRL_BLE) ? " BLE" : "",
+ (temp & OHCI_CTRL_CLE) ? " CLE" : "",
+ (temp & OHCI_CTRL_IE) ? " IE" : "",
+ (temp & OHCI_CTRL_PLE) ? " PLE" : "",
+ temp & OHCI_CTRL_CBSR
+ );
+
+ temp = readl (®s->cmdstatus);
+ dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+ (temp & OHCI_SOC) >> 16,
+ (temp & OHCI_OCR) ? " OCR" : "",
+ (temp & OHCI_BLF) ? " BLF" : "",
+ (temp & OHCI_CLF) ? " CLF" : "",
+ (temp & OHCI_HCR) ? " HCR" : ""
+ );
+
+ ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
+ ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
+
+ maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
+
+ maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
+ maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
+
+ maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
+ maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
+
+ maybe_print_eds ("donehead", readl (®s->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+ __u32 temp, ndp, i;
+
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+
+ if (verbose) {
+ dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+ ((temp & RH_A_POTPGT) >> 24) & 0xff,
+ (temp & RH_A_NOCP) ? " NOCP" : "",
+ (temp & RH_A_OCPM) ? " OCPM" : "",
+ (temp & RH_A_DT) ? " DT" : "",
+ (temp & RH_A_NPS) ? " NPS" : "",
+ (temp & RH_A_PSM) ? " PSM" : "",
+ ndp
+ );
+ temp = roothub_b (controller);
+ dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+ temp,
+ (temp & RH_B_PPCM) >> 16,
+ (temp & RH_B_DR)
+ );
+ temp = roothub_status (controller);
+ dbg ("roothub.status: %08x%s%s%s%s%s%s",
+ temp,
+ (temp & RH_HS_CRWE) ? " CRWE" : "",
+ (temp & RH_HS_OCIC) ? " OCIC" : "",
+ (temp & RH_HS_LPSC) ? " LPSC" : "",
+ (temp & RH_HS_DRWE) ? " DRWE" : "",
+ (temp & RH_HS_OCI) ? " OCI" : "",
+ (temp & RH_HS_LPS) ? " LPS" : ""
+ );
+ }
+
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+ i,
+ temp,
+ (temp & RH_PS_PRSC) ? " PRSC" : "",
+ (temp & RH_PS_OCIC) ? " OCIC" : "",
+ (temp & RH_PS_PSSC) ? " PSSC" : "",
+ (temp & RH_PS_PESC) ? " PESC" : "",
+ (temp & RH_PS_CSC) ? " CSC" : "",
+
+ (temp & RH_PS_LSDA) ? " LSDA" : "",
+ (temp & RH_PS_PPS) ? " PPS" : "",
+ (temp & RH_PS_PRS) ? " PRS" : "",
+ (temp & RH_PS_POCI) ? " POCI" : "",
+ (temp & RH_PS_PSS) ? " PSS" : "",
+
+ (temp & RH_PS_PES) ? " PES" : "",
+ (temp & RH_PS_CCS) ? " CCS" : ""
+ );
+ }
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+ dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+ /* dumps some of the state we know about */
+ ohci_dump_status (controller);
+ if (verbose)
+ ep_print_int_eds (controller, "hcca");
+ dbg ("hcca frame #%04x", controller->hcca->frame_no);
+ ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ ohci_t *ohci;
+ ed_t * ed;
+ urb_priv_t *purb_priv;
+ int i, size = 0;
+
+ ohci = &gohci;
+
+ /* when controller's hung, permit only roothub cleanup attempts
+ * such as powering down ports */
+ if (ohci->disabled) {
+ err("sohci_submit_job: EPIPE");
+ return -1;
+ }
+
+ /* if we have an unfinished URB from previous transaction let's
+ * fail and scream as quickly as possible so as not to corrupt
+ * further communication */
+ if (!urb_finished) {
+ err("sohci_submit_job: URB NOT FINISHED");
+ return -1;
+ }
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb_finished = 0;
+
+ /* every endpoint has a ed, locate and fill it */
+ if (!(ed = ep_add_ed (dev, pipe))) {
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+
+ /* for the private part of the URB we need the number of TDs (size) */
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK: /* one TD for every 4096 Byte */
+ size = (transfer_len - 1) / 4096 + 1;
+ break;
+ case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+ size = (transfer_len == 0)? 2:
+ (transfer_len - 1) / 4096 + 3;
+ break;
+ }
+
+ if (size >= (N_URB_TD - 1)) {
+ err("need %d TDs, only have %d", size, N_URB_TD);
+ return -1;
+ }
+ purb_priv = &urb_priv;
+ purb_priv->pipe = pipe;
+
+ /* fill the private part of the URB */
+ purb_priv->length = size;
+ purb_priv->ed = ed;
+ purb_priv->actual_length = 0;
+
+ /* allocate the TDs */
+ /* note that td[0] was allocated in ep_add_ed */
+ for (i = 0; i < size; i++) {
+ purb_priv->td[i] = td_alloc (dev);
+ if (!purb_priv->td[i]) {
+ purb_priv->length = i;
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: ENOMEM");
+ return -1;
+ }
+ }
+
+ if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+ urb_free_priv (purb_priv);
+ err("sohci_submit_job: EINVAL");
+ return -1;
+ }
+
+ /* link the ed into a chain if is not already */
+ if (ed->state != ED_OPER)
+ ep_link (ohci, ed);
+
+ /* fill the TDs and link it to the ed */
+ td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+ ohci_t *ohci = &gohci;
+
+ return ohci_cpu_to_le16 (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->state = ED_OPER;
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ ed->hwNextED = 0;
+ if (ohci->ed_controltail == NULL) {
+ writel (ed, &ohci->regs->ed_controlhead);
+ } else {
+ ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_controltail;
+ if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_controltail = edi;
+ break;
+
+ case PIPE_BULK:
+ ed->hwNextED = 0;
+ if (ohci->ed_bulktail == NULL) {
+ writel (ed, &ohci->regs->ed_bulkhead);
+ } else {
+ ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
+ }
+ ed->ed_prev = ohci->ed_bulktail;
+ if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+ !ohci->ed_rm_list[1] && !ohci->sleeping) {
+ ohci->hc_control |= OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ ohci->ed_bulktail = edi;
+ break;
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
+{
+ volatile ed_t *ed = edi;
+
+ ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
+
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_CLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_controltail == ed) {
+ ohci->ed_controltail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+
+ case PIPE_BULK:
+ if (ed->ed_prev == NULL) {
+ if (!ed->hwNextED) {
+ ohci->hc_control &= ~OHCI_CTRL_BLE;
+ writel (ohci->hc_control, &ohci->regs->control);
+ }
+ writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+ } else {
+ ed->ed_prev->hwNextED = ed->hwNextED;
+ }
+ if (ohci->ed_bulktail == ed) {
+ ohci->ed_bulktail = ed->ed_prev;
+ } else {
+ ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+ }
+ break;
+ }
+ ed->state = ED_UNLINK;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+ td_t *td;
+ ed_t *ed_ret;
+ volatile ed_t *ed;
+
+ ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+ (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+ if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+ err("ep_add_ed: pending delete");
+ /* pending delete request */
+ return NULL;
+ }
+
+ if (ed->state == ED_NEW) {
+ ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
+ /* dummy td; end of td list for ed */
+ td = td_alloc (usb_dev);
+ ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
+ ed->hwHeadP = ed->hwTailP;
+ ed->state = ED_UNLINK;
+ ed->type = usb_pipetype (pipe);
+ ohci_dev.ed_cnt++;
+ }
+
+ ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
+ | usb_pipeendpoint (pipe) << 7
+ | (usb_pipeisoc (pipe)? 0x8000: 0)
+ | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+ | usb_pipeslow (pipe) << 13
+ | usb_maxpacket (usb_dev, pipe) << 16);
+
+ return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+ void *data, int len,
+ struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+ volatile td_t *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+ int i;
+#endif
+
+ if (index > urb_priv->length) {
+ err("index > length");
+ return;
+ }
+ /* use this td as the next dummy */
+ td_pt = urb_priv->td [index];
+ td_pt->hwNextTD = 0;
+
+ /* fill the old dummy TD */
+ td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
+
+ td->ed = urb_priv->ed;
+ td->next_dl_td = NULL;
+ td->index = index;
+ td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+ if ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe)) {
+ for (i = 0; i < len; i++)
+ printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
+ printf("\n");
+ }
+#endif
+ if (!len)
+ data = 0;
+
+ td->hwINFO = ohci_cpu_to_le32 (info);
+ td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
+ if (data)
+ td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
+ else
+ td->hwBE = 0;
+ td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
+
+ /* append to queue */
+ td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+ ohci_t *ohci = &gohci;
+ int data_len = transfer_len;
+ void *data;
+ int cnt = 0;
+ __u32 info = 0;
+ unsigned int toggle = 0;
+
+ /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+ if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+ toggle = TD_T_TOGGLE;
+ } else {
+ toggle = TD_T_DATA0;
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+ }
+ urb->td_cnt = 0;
+ if (data_len)
+ data = buffer;
+ else
+ data = 0;
+
+ switch (usb_pipetype (pipe)) {
+ case PIPE_BULK:
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+ while(data_len > 4096) {
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+ data += 4096; data_len -= 4096; cnt++;
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+ td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+ cnt++;
+
+ if (!ohci->sleeping)
+ writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+ break;
+
+ case PIPE_CONTROL:
+ info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+ td_fill (ohci, info, setup, 8, dev, cnt++, urb);
+ if (data_len > 0) {
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+ /* NOTE: mishandles transfers >8K, some >4K */
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ }
+ info = usb_pipeout (pipe)?
+ TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+ td_fill (ohci, info, data, 0, dev, cnt++, urb);
+ if (!ohci->sleeping)
+ writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+ break;
+ }
+ if (urb->length != cnt)
+ dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+ __u32 tdINFO, tdBE, tdCBP;
+ urb_priv_t *lurb_priv = &urb_priv;
+
+ tdINFO = ohci_cpu_to_le32 (td->hwINFO);
+ tdBE = ohci_cpu_to_le32 (td->hwBE);
+ tdCBP = ohci_cpu_to_le32 (td->hwCBP);
+
+
+ if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+ ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+ if (tdBE != 0) {
+ if (td->hwCBP == 0)
+ lurb_priv->actual_length += tdBE - td->data + 1;
+ else
+ lurb_priv->actual_length += tdCBP - td->data;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+ __u32 td_list_hc;
+ td_t *td_rev = NULL;
+ td_t *td_list = NULL;
+ urb_priv_t *lurb_priv = NULL;
+
+ td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
+ ohci->hcca->done_head = 0;
+
+ while (td_list_hc) {
+ td_list = (td_t *)td_list_hc;
+
+ if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
+ lurb_priv = &urb_priv;
+ dbg(" USB-error/status: %x : %p",
+ TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
+ if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
+ if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+ td_list->ed->hwHeadP =
+ (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
+ (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
+ lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+ } else
+ td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
+ }
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
+ }
+
+ td_list->next_dl_td = td_rev;
+ td_rev = td_list;
+ td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
+ }
+ return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+ td_t *td_list_next = NULL;
+ ed_t *ed;
+ int cc = 0;
+ int stat = 0;
+ /* urb_t *urb; */
+ urb_priv_t *lurb_priv;
+ __u32 tdINFO, edHeadP, edTailP;
+
+ while (td_list) {
+ td_list_next = td_list->next_dl_td;
+
+ lurb_priv = &urb_priv;
+ tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
+
+ ed = td_list->ed;
+
+ dl_transfer_length(td_list);
+
+ /* error code of transfer */
+ cc = TD_CC_GET (tdINFO);
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+ if ((ed->state & (ED_OPER | ED_UNLINK))
+ && (lurb_priv->state != URB_DEL)) {
+ dbg("ConditionCode %#x", cc);
+ stat = cc_to_error[cc];
+ urb_finished = 1;
+ }
+ }
+
+ if (ed->state != ED_NEW) {
+ edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
+ edTailP = ohci_cpu_to_le32 (ed->hwTailP);
+
+ /* unlink eds if they are not busy */
+ if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+ ep_unlink (ohci, ed);
+ }
+
+ td_list = td_list_next;
+ }
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x00,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+ 28, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'O', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'C', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x) len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT roothub_status(&gohci)
+#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+ __u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = roothub_a (controller);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = roothub_portstatus (controller, i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) &&
+ ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, struct devrequest *cmd)
+{
+ void * data = buffer;
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ __u32 datab[4];
+ __u8 *data_buf = (__u8 *)datab;
+ __u16 bmRType_bReq;
+ __u16 wValue;
+ __u16 wIndex;
+ __u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#endif
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ info("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = m16_swap (cmd->value);
+ wIndex = m16_swap (cmd->index);
+ wLength = m16_swap (cmd->length);
+
+ info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+ dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+ switch (bmRType_bReq) {
+ /* Request Destination:
+ without flags: Device,
+ RH_INTERFACE: interface,
+ RH_ENDPOINT: endpoint,
+ RH_CLASS means HUB here,
+ RH_OTHER | RH_CLASS almost ever means HUB_PORT here
+ */
+
+ case RH_GET_STATUS:
+ *(__u16 *) data_buf = m16_swap (1); OK (2);
+ case RH_GET_STATUS | RH_INTERFACE:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_ENDPOINT:
+ *(__u16 *) data_buf = m16_swap (0); OK (2);
+ case RH_GET_STATUS | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (
+ RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+ OK (4);
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ switch (wValue) {
+ case (RH_ENDPOINT_STALL): OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ OK(0);
+ case (RH_C_HUB_OVER_CURRENT):
+ WR_RH_STAT(RH_HS_OCIC); OK (0);
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+ case (RH_C_PORT_CONNECTION):
+ WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+ case (RH_C_PORT_ENABLE):
+ WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+ case (RH_C_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+ case (RH_C_PORT_OVER_CURRENT):
+ WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+ case (RH_C_PORT_RESET):
+ WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+ }
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ switch (wValue) {
+ case (RH_PORT_SUSPEND):
+ WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+ case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PRS);
+ OK (0);
+ case (RH_PORT_POWER):
+ WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+ case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+ if (RD_RH_PORTSTAT & RH_PS_CCS)
+ WR_RH_PORTSTAT (RH_PS_PES );
+ OK (0);
+ }
+ break;
+
+ case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+ case RH_GET_DESCRIPTOR:
+ switch ((wValue & 0xff00) >> 8) {
+ case (0x01): /* device descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des; OK(len);
+ case (0x02): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des; OK(len);
+ case (0x03): /* string descriptors */
+ if(wValue==0x0300) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ OK(len);
+ }
+ if(wValue==0x0301) {
+ len = min_t(unsigned int,
+ leni,
+ min_t(unsigned int,
+ sizeof (root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ OK(len);
+ }
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ {
+ __u32 temp = roothub_a (&gohci);
+
+ data_buf [0] = 9; /* min length; */
+ data_buf [1] = 0x29;
+ data_buf [2] = temp & RH_A_NDP;
+ data_buf [3] = 0;
+ if (temp & RH_A_PSM) /* per-port power switching? */
+ data_buf [3] |= 0x1;
+ if (temp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf [3] |= 0x10;
+ else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
+ data_buf [3] |= 0x8;
+
+ /* corresponds to data_buf[4-7] */
+ datab [1] = 0;
+ data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+ temp = roothub_b (&gohci);
+ data_buf [7] = temp & RH_B_DR;
+ if (data_buf [2] < 7) {
+ data_buf [8] = 0xff;
+ } else {
+ data_buf [0] += 2;
+ data_buf [8] = (temp & RH_B_DR) >> 8;
+ data_buf [10] = data_buf [9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf [0], wLength));
+ OK (len);
+ }
+
+ case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
+
+ case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
+
+ default:
+ dbg ("unsupported root hub command");
+ stat = USB_ST_STALLED;
+ }
+
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+
+ len = min_t(int, len, leni);
+ if (data != data_buf)
+ memcpy (data, data_buf, len);
+ dev->act_len = len;
+ dev->status = stat;
+
+#ifdef DEBUG
+ if (transfer_len)
+ urb_priv.actual_length = transfer_len;
+ pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#endif
+
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup, int interval)
+{
+ int stat = 0;
+ int maxsize = usb_maxpacket(dev, pipe);
+ int timeout;
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ dev->status = USB_ST_CRC_ERR;
+ return 0;
+ }
+
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_common_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+
+ if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+ err("sohci_submit_job failed");
+ return -1;
+ }
+
+ /* allow more time for a BULK device to react - some are slow */
+#define BULK_TO 5000 /* timeout in milliseconds */
+ if (usb_pipetype (pipe) == PIPE_BULK)
+ timeout = BULK_TO;
+ else
+ timeout = 100;
+
+ /* wait for it to complete */
+ for (;;) {
+ /* check whether the controller is done */
+ stat = hc_interrupt();
+ if (stat < 0) {
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+ /* 0xff is returned for an SF-interrupt */
+ break;
+ }
+
+ if (--timeout) {
+ wait_ms(1);
+ if (!urb_finished)
+ dbg("\%");
+
+ } else {
+ err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ stat = USB_ST_CRC_ERR;
+ urb_finished = 1;
+ break;
+ }
+ }
+#if 0
+ /* we got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+#ifdef DEBUG
+ ohci_dump_roothub (&gohci, 1);
+#endif
+ got_rhsc = 0;
+ /* abuse timeout */
+ timeout = rh_check_port_status(&gohci);
+ if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+ /* the called routine adds 1 to the passed value */
+ usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+ /*
+ * XXX
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+#endif
+
+ dev->status = stat;
+ dev->act_len = transfer_len;
+
+#ifdef DEBUG
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#endif
+
+ /* free TDs in urb_priv */
+ urb_free_priv (&urb_priv);
+ return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len)
+{
+ info("submit_bulk_msg");
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, struct devrequest *setup)
+{
+ int maxsize = usb_maxpacket(dev, pipe);
+
+ info("submit_control_msg");
+#ifdef DEBUG
+ urb_priv.actual_length = 0;
+ pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#endif
+ if (!maxsize) {
+ err("submit_control_message: pipesize for pipe %lx is zero",
+ pipe);
+ return -1;
+ }
+ if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+ gohci.rh.dev = dev;
+ /* root hub - redirect */
+ return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+ setup);
+ }
+
+ return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int transfer_len, int interval)
+{
+ info("submit_int_msg");
+ return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+ int timeout = 30;
+ int smm_timeout = 50; /* 0,5 sec */
+
+ if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+ writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+ info("USB HC TakeOver from SMM");
+ while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+ wait_ms (10);
+ if (--smm_timeout == 0) {
+ err("USB HC TakeOver failed!");
+ return -1;
+ }
+ }
+ }
+
+ /* Disable HC interrupts */
+ writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+ dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+ ohci->slot_name,
+ readl (&ohci->regs->control));
+
+ /* Reset USB (needed by some controllers) */
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* HC Reset requires max 10 us delay */
+ writel (OHCI_HCR, &ohci->regs->cmdstatus);
+ while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+ if (--timeout == 0) {
+ err("USB HC reset timed out!");
+ return -1;
+ }
+ udelay (1);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+ __u32 mask;
+ unsigned int fminterval;
+
+ ohci->disabled = 1;
+
+ /* Tell the controller where the control and bulk lists are
+ * The lists are empty now. */
+
+ writel (0, &ohci->regs->ed_controlhead);
+ writel (0, &ohci->regs->ed_bulkhead);
+
+ writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+ fminterval = 0x2edf;
+ writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+ fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+ writel (fminterval, &ohci->regs->fminterval);
+ writel (0x628, &ohci->regs->lsthresh);
+
+ /* start controller operations */
+ ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci->disabled = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
+
+ /* disable all interrupts */
+ mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+ OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+ OHCI_INTR_OC | OHCI_INTR_MIE);
+ writel (mask, &ohci->regs->intrdisable);
+ /* clear all interrupts */
+ mask &= ~OHCI_INTR_MIE;
+ writel (mask, &ohci->regs->intrstatus);
+ /* Choose the interrupts we care about now - but w/o MIE */
+ mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+ writel (mask, &ohci->regs->intrenable);
+
+#ifdef OHCI_USE_NPS
+ /* required for AMD-756 and some Mac platforms */
+ writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+ &ohci->regs->roothub.a);
+ writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif /* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+ /* POTPGT delay is bits 24-31, in 2 ms units. */
+ mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+ /* connect the virtual root hub */
+ ohci->rh.devnum = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+ ohci_t *ohci = &gohci;
+ struct ohci_regs *regs = ohci->regs;
+ int ints;
+ int stat = -1;
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
+
+ ints = OHCI_INTR_WDH;
+
+ } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+
+ } else if ((ints &= readl (®s->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+
+ /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+ if (ints & OHCI_INTR_RHSC) {
+ got_rhsc = 1;
+ stat = 0xff;
+ }
+
+ if (ints & OHCI_INTR_UE) {
+ ohci->disabled++;
+ err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+ ohci->slot_name);
+ /* e.g. due to PCI Master/Target Abort */
+
+#ifdef DEBUG
+ ohci_dump (ohci, 1);
+#endif
+ /* FIXME: be optimistic, hope that bug won't repeat often. */
+ /* Make some non-interrupt context restart the controller. */
+ /* Count and limit the retries though; either hardware or */
+ /* software errors can go forever... */
+ hc_reset (ohci);
+ return -1;
+ }
+
+ if (ints & OHCI_INTR_WDH) {
+ writel (OHCI_INTR_WDH, ®s->intrdisable);
+ stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+ writel (OHCI_INTR_WDH, ®s->intrenable);
+ }
+
+ if (ints & OHCI_INTR_SO) {
+ dbg("USB Schedule overrun\n");
+ writel (OHCI_INTR_SO, ®s->intrenable);
+ stat = -1;
+ }
+
+ /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
+ if (ints & OHCI_INTR_SF) {
+ unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
+ wait_ms(1);
+ writel (OHCI_INTR_SF, ®s->intrdisable);
+ if (ohci->ed_rm_list[frame] != NULL)
+ writel (OHCI_INTR_SF, ®s->intrenable);
+ stat = 0xff;
+ }
+
+ writel (ints, ®s->intrstatus);
+ return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+ dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+ if (!ohci->disabled)
+ hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+ memset (&gohci, 0, sizeof (ohci_t));
+ memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+ /* align the storage */
+ if ((__u32)&ghcca[0] & 0xff) {
+ err("HCCA not aligned!!");
+ return -1;
+ }
+ phcca = &ghcca[0];
+ info("aligned ghcca %p", phcca);
+ memset(&ohci_dev, 0, sizeof(struct ohci_device));
+ if ((__u32)&ohci_dev.ed[0] & 0x7) {
+ err("EDs not aligned!!");
+ return -1;
+ }
+ memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+ if ((__u32)gtd & 0x7) {
+ err("TDs not aligned!!");
+ return -1;
+ }
+ ptd = gtd;
+ gohci.hcca = phcca;
+ memset (phcca, 0, sizeof (struct ohci_hcca));
+
+ gohci.disabled = 1;
+ gohci.sleeping = 0;
+ gohci.irq = -1;
+ gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+
+ gohci.flags = 0;
+ gohci.slot_name = "ppc440";
+
+ if (hc_reset (&gohci) < 0) {
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+ if (hc_start (&gohci) < 0) {
+ err ("can't start usb-%s", gohci.slot_name);
+ hc_release_ohci (&gohci);
+ return -1;
+ }
+
+#ifdef DEBUG
+ ohci_dump (&gohci, 1);
+#endif
+ ohci_inited = 1;
+ urb_finished = 1;
+
+ /* init the device driver */
+ usb_dev_init();
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ /* this gets called really early - before the controller has */
+ /* even been initialized! */
+ if (!ohci_inited)
+ return 0;
+ /* TODO release any interrupts, etc. */
+ /* call hc_release_ohci() here ? */
+ hc_reset (&gohci);
+ return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/ppc4xx/usb_ohci.h b/cpu/ppc4xx/usb_ohci.h
new file mode 100644
index 0000000..706e05e
--- /dev/null
+++ b/cpu/ppc4xx/usb_ohci.h
@@ -0,0 +1,410 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+ /* No Error */ 0,
+ /* CRC Error */ USB_ST_CRC_ERR,
+ /* Bit Stuff */ USB_ST_BIT_ERR,
+ /* Data Togg */ USB_ST_CRC_ERR,
+ /* Stall */ USB_ST_STALLED,
+ /* DevNotResp */ -1,
+ /* PIDCheck */ USB_ST_BIT_ERR,
+ /* UnExpPID */ USB_ST_BIT_ERR,
+ /* DataOver */ USB_ST_BUF_ERR,
+ /* DataUnder */ USB_ST_BUF_ERR,
+ /* reservd */ -1,
+ /* reservd */ -1,
+ /* BufferOver */ USB_ST_BUF_ERR,
+ /* BuffUnder */ USB_ST_BUF_ERR,
+ /* Not Access */ -1,
+ /* Not Access */ -1
+};
+
+/* ED States */
+
+#define ED_NEW 0x00
+#define ED_UNLINK 0x01
+#define ED_OPER 0x02
+#define ED_DEL 0x04
+#define ED_URB_DEL 0x08
+
+/* usb_ohci_ed */
+struct ed {
+ __u32 hwINFO;
+ __u32 hwTailP;
+ __u32 hwHeadP;
+ __u32 hwNextED;
+
+ struct ed *ed_prev;
+ __u8 int_period;
+ __u8 int_branch;
+ __u8 int_load;
+ __u8 int_interval;
+ __u8 state;
+ __u8 type;
+ __u16 last_iso;
+ struct ed *ed_rm_list;
+
+ struct usb_device *usb_dev;
+ __u32 unused[3];
+} __attribute((aligned(16)));
+typedef struct ed ed_t;
+
+/* TD info field */
+#define TD_CC 0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC 0x0C000000
+#define TD_T 0x03000000
+#define TD_T_DATA0 0x02000000
+#define TD_T_DATA1 0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R 0x00040000
+#define TD_DI 0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP 0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN 0x00100000
+#define TD_DP_OUT 0x00080000
+
+#define TD_ISO 0x00010000
+#define TD_DEL 0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+#define TD_NOTACCESSED 0x0F
+
+#define MAXPSW 1
+
+struct td {
+ __u32 hwINFO;
+ __u32 hwCBP; /* Current Buffer Pointer */
+ __u32 hwNextTD; /* Next TD Pointer */
+ __u32 hwBE; /* Memory Buffer End Pointer */
+
+ __u16 hwPSW[MAXPSW];
+ __u8 unused;
+ __u8 index;
+ struct ed *ed;
+ struct td *next_dl_td;
+ struct usb_device *usb_dev;
+ int transfer_len;
+ __u32 data;
+
+ __u32 unused2[2];
+} __attribute((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP (1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of. It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32 /* part of the OHCI standard */
+struct ohci_hcca {
+ __u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
+ __u16 frame_no; /* current frame number */
+ __u16 pad1; /* set to 0 on each frame_no change */
+#endif
+ __u32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc[116];
+} __attribute((aligned(256)));
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region. This is Memory Mapped I/O. You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+ /* control and status registers */
+ __u32 revision;
+ __u32 control;
+ __u32 cmdstatus;
+ __u32 intrstatus;
+ __u32 intrenable;
+ __u32 intrdisable;
+ /* memory pointers */
+ __u32 hcca;
+ __u32 ed_periodcurrent;
+ __u32 ed_controlhead;
+ __u32 ed_controlcurrent;
+ __u32 ed_bulkhead;
+ __u32 ed_bulkcurrent;
+ __u32 donehead;
+ /* frame counters */
+ __u32 fminterval;
+ __u32 fmremaining;
+ __u32 fmnumber;
+ __u32 periodicstart;
+ __u32 lsthresh;
+ /* Root hub ports */
+ struct ohci_roothub_regs {
+ __u32 a;
+ __u32 b;
+ __u32 status;
+ __u32 portstatus[MAX_ROOT_PORTS];
+ } roothub;
+} __attribute((aligned(32)));
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+ int devnum; /* Address of Root Hub endpoint */
+ void *dev; /* was urb */
+ void *int_addr;
+ int send;
+ int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status */
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct {
+ ed_t *ed;
+ __u16 length; /* number of tds associated with this request */
+ __u16 td_cnt; /* number of tds already serviced */
+ int state;
+ unsigned long pipe;
+ int actual_length;
+ td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+typedef struct ohci {
+ struct ohci_hcca *hcca; /* hcca */
+ /*dma_addr_t hcca_dma; */
+
+ int irq;
+ int disabled; /* e.g. got a UE, we're hung */
+ int sleeping;
+ unsigned long flags; /* for HC bugs */
+
+ struct ohci_regs *regs; /* OHCI controller's memory */
+
+ ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
+ ed_t *ed_bulktail; /* last endpoint of bulk list */
+ ed_t *ed_controltail; /* last endpoint of control list */
+ int intrstatus;
+ __u32 hc_control; /* copy of the hc control reg */
+ struct usb_device *dev[32];
+ struct virt_root_hub rh;
+
+ const char *slot_name;
+} ohci_t;
+
+#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+ ed_t ed[NUM_EDS];
+ int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD + 1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *td_alloc(struct usb_device *usb_dev)
+{
+ int i;
+ struct td *td;
+
+ td = NULL;
+ for (i = 0; i < NUM_TD; i++) {
+ if (ptd[i].usb_dev == NULL) {
+ td = &ptd[i];
+ td->usb_dev = usb_dev;
+ break;
+ }
+ }
+
+ return td;
+}
+
+static inline void ed_free(struct ed *ed)
+{
+ ed->usb_dev = NULL;
+}
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
new file mode 100644
index 0000000..f0901ac
--- /dev/null
+++ b/cpu/ppc4xx/usbdev.c
@@ -0,0 +1,214 @@
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_440_EP
+
+#include <usb.h>
+#include "usbdev.h"
+#include "vecnum.h"
+
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+
+unsigned char set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+ /*will hold the packet received */
+ struct usb_device_descriptor usb_device_packet;
+ struct usb_config_descriptor usb_config_packet;
+ struct usb_string_descriptor usb_string_packet;
+ struct devrequest setup_packet;
+ unsigned int *setup_packet_pt;
+ unsigned char *packet_pt;
+ int temp, temp1;
+
+ int i;
+
+ /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+ /*set usb address, seems to not work unless it is done in the next
+ interrupt, so that is why it is done this way */
+ if (set_value != -1)
+ *(unsigned char *)USB2D0_FADDR_8 = set_value;
+
+ /*endpoint 1 */
+ if (usb2d0_intrin & 0x01) {
+ setup_packet_pt = (unsigned int *)&setup_packet;
+
+ /*copy packet */
+ setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+ setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+ temp = *(unsigned int *)USB2D0_FIFO_0;
+ temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+ /*do some swapping */
+ setup_packet.value = swap_16(setup_packet.value);
+ setup_packet.index = swap_16(setup_packet.index);
+ setup_packet.length = swap_16(setup_packet.length);
+
+ /*clear rx packet */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+ /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+ setup_packet.request, setup_packet.value,
+ setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+ switch (setup_packet.request) {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ switch (setup_packet.value >> 8) {
+ case USB_DT_DEVICE:
+ /*create packet */
+ usb_device_packet.bLength = 18;
+ usb_device_packet.bDescriptorType =
+ USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+ usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+ usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+ usb_device_packet.bDeviceClass = 0xff;
+ usb_device_packet.bDeviceSubClass = 0;
+ usb_device_packet.bDeviceProtocol = 0;
+ usb_device_packet.bMaxPacketSize0 = 32;
+ usb_device_packet.idVendor = swap_16(1);
+ usb_device_packet.idProduct = swap_16(2);
+ usb_device_packet.bcdDevice = swap_16(0x300);
+ usb_device_packet.iManufacturer = 1;
+ usb_device_packet.iProduct = 1;
+ usb_device_packet.iSerialNumber = 1;
+ usb_device_packet.bNumConfigurations = 1;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_device_packet;
+ break;
+
+ case USB_DT_CONFIG:
+ /*create packet */
+ usb_config_packet.bLength = 9;
+ usb_config_packet.bDescriptorType =
+ USB_DT_CONFIG;
+ usb_config_packet.wTotalLength = swap_16(25);
+ usb_config_packet.bNumInterfaces = 1;
+ usb_config_packet.bConfigurationValue = 1;
+ usb_config_packet.iConfiguration = 0;
+ usb_config_packet.bmAttributes = 0x40;
+ usb_config_packet.MaxPower = 0;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_config_packet;
+ break;
+
+ case USB_DT_STRING:
+ /*create packet */
+ usb_string_packet.bLength = 2;
+ usb_string_packet.bDescriptorType =
+ USB_DT_STRING;
+ usb_string_packet.wData[0] = 0x0094;
+
+ /*put packet in fifo */
+ packet_pt = (unsigned char *)&usb_string_packet;
+ break;
+ }
+
+ /*put packet in fifo */
+ for (i = 0; i < (setup_packet.length); i++) {
+ *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+ }
+
+ /*give tx command */
+ *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+
+ /*copy usb address */
+ set_value = setup_packet.value;
+
+ break;
+ }
+
+ }
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+ /*check for sof */
+ if (usb2d0_intrusb & 0x08) {
+ /*printf("{USB device} - sof detected\n"); */
+ }
+
+ /*check for reset */
+ if (usb2d0_intrusb & 0x04) {
+ /*printf("{USB device} - reset detected\n"); */
+
+ /*copy usb address of zero, need to do this when usb reset */
+ set_value = 0;
+ }
+
+ if (usb2d0_intrusb & 0x02) {
+ /*printf("{USB device} - resume detected\n"); */
+ }
+
+ if (usb2d0_intrusb & 0x01) {
+ /*printf("{USB device} - suspend detected\n"); */
+ }
+}
+
+int usbInt(void)
+{
+ /*Must read these 2 registers and use values to clear interrupts. If you
+ do not read them then the interrupt will not be cleared. If you do not
+ use the variable the optimizer will not do a read. */
+ volatile unsigned short usb2d0_intrin =
+ *(unsigned short *)USB2D0_INTRIN_16;
+ volatile unsigned char usb2d0_intrusb =
+ *(unsigned char *)USB2D0_INTRUSB_8;
+
+ /*check if there was an endpoint interrupt */
+ if (usb2d0_intrin != 0) {
+ process_endpoints(usb2d0_intrin);
+ }
+
+ /*check for other interrupts */
+ if (usb2d0_intrusb != 0) {
+ process_other(usb2d0_intrusb);
+ }
+
+ return 0;
+}
+
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+ printf("USB 2.0 Device init\n");
+ /*select 2.0 device */
+ mtsdr(sdr_usb0, 0x0); /* 2.0 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+#else
+ printf("USB 1.1 Device init\n");
+ /*select 1.1 device */
+ mtsdr(sdr_usb0, 0x2); /* 1.1 */
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
+#endif
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+
+#endif /*CONFIG_440_EP */
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
new file mode 100644
index 0000000..3446d98
--- /dev/null
+++ b/cpu/ppc4xx/usbdev.h
@@ -0,0 +1,31 @@
+#include <config.h>
+
+/*Common Registers*/
+#define USB2D0_INTRIN_16 (CFG_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8 (CFG_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8 (CFG_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16 (CFG_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16 (CFG_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8 (CFG_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8 (CFG_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CFG_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8 (CFG_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8 (CFG_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16 (CFG_USB_DEVICE | 0x10e)
+
+/*Indexed Registers*/
+#define USB2D0_INCSR0_8 (CFG_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16 (CFG_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16 (CFG_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16 (CFG_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16 (CFG_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CFG_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CFG_USB_DEVICE | 0x11a)
+
+/*FIFOs*/
+#define USB2D0_FIFO_0 (CFG_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CFG_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CFG_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CFG_USB_DEVICE | 0x12c)
+
+void usb_dev_init(void);
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index d493a5d..1038975 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -69,6 +69,7 @@
#define VECNUM_MS (32 + 0 ) /* MAL SERR */
#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */
#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */
+#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */
#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */
#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
diff --git a/doc/README.AMCC-eval-boards-cleanup b/doc/README.AMCC-eval-boards-cleanup
new file mode 100644
index 0000000..901bd87
--- /dev/null
+++ b/doc/README.AMCC-eval-boards-cleanup
@@ -0,0 +1,31 @@
+---------------------------------------------------------------------
+Cleanup of AMCC eval boards (Walnut/Sycamore, Bubinga, Ebony, Ocotea)
+---------------------------------------------------------------------
+
+Changes to all AMCC eval boards:
+--------------------------------
+
+o Changed u-boot image size to 256 kBytes instead of 512 kBytes on most
+ boards.
+
+o Use 115200 baud as default console baudrate.
+
+o Added config option to use redundant environment in flash. This is also
+ the default setting. Option for environment in nvram is still available
+ for backward compatibility.
+
+o Merged board specific flash drivers to common flash driver:
+ board/amcc/common/flash.c
+
+
+Sycamore/Walnut (one port supporting both eval boards):
+-------------------------------------------------------
+
+o Cleanup to allow easier "cloning" for different (custom) boards:
+
+ o Moved EBC configuration from board specific asm-file "init.S"
+ using defines in board configuration file. No board specific
+ asm file needed anymore.
+
+
+August 01 2005, Stefan Roese <sr@denx.de>
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index 584a4fc..4923209 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -52,7 +52,7 @@
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
-#elif defined(CONFIG_440_GX)
+#elif defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
diff --git a/include/405gp_enet.h b/include/405gp_enet.h
index 88ac4add..233ea11 100644
--- a/include/405gp_enet.h
+++ b/include/405gp_enet.h
@@ -67,7 +67,11 @@
/*Register addresses */
#if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
+#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
+#endif
#define ZMII_FER (ZMII_BASE)
#define ZMII_SSR (ZMII_BASE + 4)
#define ZMII_SMIISR (ZMII_BASE + 8)
@@ -77,7 +81,11 @@
#endif /* CONFIG_440 */
#if defined(CONFIG_440)
-#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
#else
#define EMAC_BASE 0xEF600800
#endif
diff --git a/include/440_i2c.h b/include/440_i2c.h
index b0ac592..9fdf7d8 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,11 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
+#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
+#endif /*CONFIG_440_EP CONFIG_440_GR*/
#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
diff --git a/include/440gx_enet.h b/include/440gx_enet.h
index 8caf969..022c5d8 100644
--- a/include/440gx_enet.h
+++ b/include/440gx_enet.h
@@ -140,7 +140,11 @@
/*ZMII Bridge Register addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
+#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
+#endif
#define ZMII_FER (ZMII_BASE)
#define ZMII_SSR (ZMII_BASE + 4)
#define ZMII_SMIISR (ZMII_BASE + 8)
@@ -272,7 +276,11 @@
/* Ethernet MAC Regsiter Addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
#define EMAC_M0 (EMAC_BASE)
#define EMAC_M1 (EMAC_BASE + 4)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index d4404c1..6b131b6 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -723,6 +723,8 @@
#define PVR_405GPR_RB 0x50910951
#define PVR_440GP_RB 0x40120440
#define PVR_440GP_RC 0x40120481
+#define PVR_440EP_RA 0x42221850
+#define PVR_440EP_RB 0x422218D3
#define PVR_440GX_RA 0x51B21850
#define PVR_440GX_RB 0x51B21851
#define PVR_440GX_RC 0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index e821e91..5b6cd6f 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -101,13 +101,18 @@
unsigned char bi_enet3addr[6];
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \
+ defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ int bi_phynum[2]; /* Determines phy mapping */
+ int bi_phymode[2]; /* Determines phy mode */
+#endif
#if defined(CONFIG_440_GX)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index d7025eb..ca0bd12 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -47,7 +47,7 @@
* CONFIG_PPCHAMELEON_CLK_33
*/
#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_PPCHAMELEON_CLK_33
+#define CONFIG_PPCHAMELEON_CLK_25
#endif
#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
diff --git a/include/configs/WALNUT405.h b/include/configs/WALNUT405.h
deleted file mode 100644
index 9155ce8..0000000
--- a/include/configs/WALNUT405.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_WALNUT405 1 /* ...on a WALNUT405 board */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-/*#define CFG_ENV_IS_IN_FLASH 1*/ /* use FLASH for environment vars */
-#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#if 1
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-#endif
-
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
-#else
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#endif
-
-#if 0
-#define CONFIG_BOOTARGS "root=/dev/nfs " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
- "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
-#else
-#define CONFIG_BOOTARGS "root=/dev/hda1 " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
-
-#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
-
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/*
- * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
- * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
- * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
- * The Linux BASE_BAUD define should match this configuration.
- * baseBaud = cpuClock/(uartDivisor*16)
- * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
- * set Linux BASE_BAUD to 403200.
- */
-#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD 691200
-
-/* The following table includes the supported baudrates */
-#define CFG_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
- /* resource configuration */
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-
-/*-----------------------------------------------------------------------
- * External peripheral base address
- *-----------------------------------------------------------------------
- */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
-
-#define CFG_KEY_REG_BASE_ADDR 0xF0100000
-#define CFG_IR_REG_BASE_ADDR 0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
- */
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFF80000
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/* BEG ENVIRONNEMENT FLASH */
-#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#endif
-/* END ENVIRONNEMENT FLASH */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
-#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
-#endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
-#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
-
-
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR 0xF0000500
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
-
-#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Definitions for Serial Presence Detect EEPROM address
- * (to get SDRAM settings)
- */
-#define SPD_EEPROM_ADDRESS 0x50
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
new file mode 100644
index 0000000..6ccd8b9
--- /dev/null
+++ b/include/configs/bamboo.h
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * bamboo.h - configuration for BAMBOO board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
+#define CONFIG_440_EP 1 /* Specific PPC440EP support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+/*#define CONFIG_SYS_CLK_FREQ 66666666 /X* external freq to pll */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+/*#define CFG_SDRAM_BANKS (2) */
+#define CFG_SDRAM_BANKS (1)
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 0 /* test-only */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+#else
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/BUBINGA405EP.h b/include/configs/bubinga.h
similarity index 82%
rename from include/configs/BUBINGA405EP.h
rename to include/configs/bubinga.h
index 507cb75..c745195 100644
--- a/include/configs/BUBINGA405EP.h
+++ b/include/configs/bubinga.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -28,11 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* Debug options */
-/*#define __DEBUG_START_FROM_SRAM__ */
-/*#define DEBUG 1*/
-
-
/*
* High Level Configuration Options
* (easy to change)
@@ -40,7 +35,7 @@
#define CONFIG_405EP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_BUBINGA405EP 1 /* ...on a BUBINGA405EP board */
+#define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
@@ -49,8 +44,6 @@
#define CONFIG_NO_SERIAL_EEPROM
/*#undef CONFIG_NO_SERIAL_EEPROM*/
/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
#ifdef CONFIG_NO_SERIAL_EEPROM
/*
@@ -75,49 +68,60 @@
#endif
/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*#define CFG_ENV_IS_IN_FLASH 1*/ /* use FLASH for environment vars */
-#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
-#if 1
-#define CONFIG_BOOTCOMMAND "" /* autoboot command */
-#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-#endif
+#undef CONFIG_BOOTARGS
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
-#else
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=bubinga\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/bubinga/uImage\0" \
+ "kernel_addr=fff80000\0" \
+ "ramdisk_addr=fff90000\0" \
+ "load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run net_nfs"
#if 0
-#define CONFIG_BOOTARGS "root=/dev/nfs " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
- "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#define CONFIG_BOOTARGS "root=/dev/hda1 " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_BAUDRATE 115200
+
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -126,29 +130,8 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
-/*
-#ifndef __DEBUG_START_FROM_SRAM__
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF )
-#endif
-*/
-
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
CFG_CMD_CACHE | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
@@ -156,14 +139,13 @@
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- 0 )
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -198,6 +180,7 @@
* If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
* set Linux BASE_BAUD to 403200.
*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
@@ -211,6 +194,17 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
@@ -224,7 +218,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#endif
-
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@@ -239,8 +232,8 @@
/* resource configuration */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
@@ -253,9 +246,6 @@
* External peripheral base address
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
-
#define CFG_KEY_REG_BASE_ADDR 0xF0100000
#define CFG_IR_REG_BASE_ADDR 0xF0200000
#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
@@ -266,20 +256,11 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_SRAM_BASE 0xFFF80000
-#define CFG_FLASH_BASE 0xFFF00000
-#define CFG_MONITOR_BASE CFG_SRAM_BASE
-#else
#define CFG_SRAM_BASE 0xFFF00000
#define CFG_FLASH_BASE 0xFFF80000
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#endif
-
-
-/*#define CFG_MONITOR_LEN (200 * 1024) /XXX* Reserve 200 kB for Monitor */
-#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 200 kB for Monitor */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
/*
* For booting Linux, the board info and command line data
@@ -287,6 +268,7 @@
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
/*-----------------------------------------------------------------------
* FLASH organization
*/
@@ -296,13 +278,20 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
-/* BEG ENVIRONNEMENT FLASH */
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* NVRAM organization
*/
@@ -332,7 +321,6 @@
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
-
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in data cache)
*/
@@ -424,7 +412,6 @@
#define FPGA_REG1_OFFB_FLASH 0x02 /* Off board flash */
#define FPGA_REG1_SRAM_BOOT 0x01 /* SRAM at 0xFFF80000 not Flash */
-
/*
* Internal Definitions
*
diff --git a/include/configs/EBONY.h b/include/configs/ebony.h
similarity index 71%
rename from include/configs/EBONY.h
rename to include/configs/ebony.h
index 46e729f..ebd0b53 100644
--- a/include/configs/EBONY.h
+++ b/include/configs/ebony.h
@@ -36,20 +36,31 @@
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */
-#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
+#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
-#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
@@ -69,7 +80,7 @@
*----------------------------------------------------------------------*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
@@ -87,16 +98,37 @@
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
#define CFG_MAX_FLASH_SECT 32 /* sectors per device */
-#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
@@ -112,22 +144,47 @@
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
+#undef CONFIG_BOOTARGS
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=ebony\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/ebony/uImage\0" \
+ "kernel_addr=ff800000\0" \
+ "ramdisk_addr=ff810000\0" \
+ "load=tftp 100000 /tftpboot/ebony/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
-#define CONFIG_BOOTARGS "root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#define CONFIG_BOOTDELAY -1 /* disable autoboot */
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -135,16 +192,22 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 8 /* PHY address */
-
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -173,6 +236,12 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* PCI stuff
@@ -188,7 +257,7 @@
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
diff --git a/include/configs/OCOTEA.h b/include/configs/ocotea.h
similarity index 74%
rename from include/configs/OCOTEA.h
rename to include/configs/ocotea.h
index 5e78b45..4f90b1b 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/ocotea.h
@@ -1,6 +1,9 @@
/*
* (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -85,6 +88,21 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
+
+
+/*-----------------------------------------------------------------------
* NVRAM/RTC
*
* NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
@@ -97,6 +115,12 @@
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
@@ -107,6 +131,20 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
@@ -122,22 +160,46 @@
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-#define CONFIG_ENV_OVERWRITE 1
+#undef CONFIG_BOOTARGS
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=ocotea\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/ocotea/uImage\0" \
+ "kernel_addr=fff00000\0" \
+ "ramdisk_addr=fff10000\0" \
+ "load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
-#define CONFIG_BOOTARGS "root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#define CONFIG_BOOTDELAY -1 /* disable autoboot */
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -151,32 +213,22 @@
#define CONFIG_PHY3_ADDR 0x18
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.1.2.3
-#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP 10.1.2.2
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -206,22 +258,28 @@
#define CFG_HZ 100 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
-#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
@@ -233,7 +291,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
new file mode 100644
index 0000000..3a8e61c
--- /dev/null
+++ b/include/configs/walnut.h
@@ -0,0 +1,334 @@
+/*
+ * (C) Copyright 2000-2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_WALNUT 1 /* ...on a WALNUT board */
+ /* ...and on a SYCAMORE board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=walnut\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/walnut/uImage\0" \
+ "kernel_addr=fff80000\0" \
+ "ramdisk_addr=fff80000\0" \
+ "load=tftp 100000 /tftpboot/walnut/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+
+#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFFF80000
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
+#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+ /* have only 8kB, 16kB is save here */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x9B015480
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB1AP 0x02815480
+#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB2AP 0x04815A80
+#define CFG_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB3AP 0x01815280
+#define CFG_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB7AP 0x01815280
+#define CFG_EBC_PB7CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#define CFG_KEY_REG_BASE_ADDR 0xF0100000
+#define CFG_IR_REG_BASE_ADDR 0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
+
+#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Definitions for Serial Presence Detect EEPROM address
+ * (to get SDRAM settings)
+ */
+#define SPD_EEPROM_ADDRESS 0x50
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
new file mode 100644
index 0000000..d83d8e7
--- /dev/null
+++ b/include/configs/yellowstone.h
@@ -0,0 +1,298 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yellowstone.h - configuration for YELLOWSTONE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
+#define CONFIG_440_GR 1 /* Specific PPC440GR support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
new file mode 100644
index 0000000..18d6623
--- /dev/null
+++ b/include/configs/yosemite.h
@@ -0,0 +1,312 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yosemite.h - configuration for YOSEMITE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
+#define CONFIG_440_EP 1 /* Specific PPC440EP support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 1 /* test-only */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+#else
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/pci.h b/include/pci.h
index 458be23..8f19997 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -160,6 +160,21 @@
#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+/* From 440ep */
+#define PCI_ERREN 0x48 /* Error Enable */
+#define PCI_ERRSTS 0x49 /* Error Status */
+#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */
+#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */
+#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */
+#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */
+#define PCI_CAPID 0x58 /* Capability Identifier */
+#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */
+#define PCI_PMC 0x5A /* Power Management Capabilities */
+#define PCI_PMCSR 0x5C /* Power Management Control Status */
+#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */
+#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */
+#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */
+
/* Header type 2 (CardBus bridges) */
#define PCI_CB_CAPABILITY_LIST 0x14
/* 0x15 reserved */
diff --git a/include/ppc440.h b/include/ppc440.h
index acd4572..3e9034f 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -78,7 +78,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -108,6 +108,7 @@
#define icdbtrh 0x39f /* instruction cache debug tag register high */
#define mmucr 0x3b2 /* mmu control register */
#define ccr0 0x3b3 /* core configuration register 0 */
+#define ccr1 0x378 /* core configuration for 440x5 only */
#define icdbdr 0x3d3 /* instruction cache debug data register */
#define dbdr 0x3f3 /* debug data register */
@@ -131,6 +132,7 @@
#define clk_opbd 0x00c0
#define clk_perd 0x00e0
#define clk_mald 0x0100
+#define clk_spcid 0x0120
#define clk_icfg 0x0140
/* 440gx sdr register definations */
@@ -149,19 +151,24 @@
#define sdr_ebc 0x0100
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
+#define sdr_uart2 0x0122 /* UART2 Config */
+#define sdr_uart3 0x0123 /* UART3 Config */
#define sdr_cp440 0x0180
#define sdr_xcr 0x01c0
#define sdr_xpllc 0x01c1
#define sdr_xplld 0x01c2
#define sdr_srst 0x0200
#define sdr_slpipe 0x0220
-#define sdr_amp 0x0240
+#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
+#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
#define sdr_mirq0 0x0260
#define sdr_mirq1 0x0261
#define sdr_maltbl 0x0280
#define sdr_malrbl 0x02a0
#define sdr_maltbs 0x02c0
#define sdr_malrbs 0x02e0
+#define sdr_pci0 0x0300
+#define sdr_usb0 0x0320
#define sdr_cust0 0x4000
#define sdr_sdstp2 0x4001
#define sdr_cust1 0x4002
@@ -234,6 +241,98 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x23 /* external bus core id reg */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PLB4 to PLB3 Bridge OUT */
+#define P4P3_DCR_BASE 0x020
+#define p4p3_esr0_read (P4P3_DCR_BASE+0x0)
+#define p4p3_esr0_write (P4P3_DCR_BASE+0x1)
+#define p4p3_eadr (P4P3_DCR_BASE+0x2)
+#define p4p3_euadr (P4P3_DCR_BASE+0x3)
+#define p4p3_esr1_read (P4P3_DCR_BASE+0x4)
+#define p4p3_esr1_write (P4P3_DCR_BASE+0x5)
+#define p4p3_confg (P4P3_DCR_BASE+0x6)
+#define p4p3_pic (P4P3_DCR_BASE+0x7)
+#define p4p3_peir (P4P3_DCR_BASE+0x8)
+#define p4p3_rev (P4P3_DCR_BASE+0xA)
+
+/* PLB3 to PLB4 Bridge IN */
+#define P3P4_DCR_BASE 0x030
+#define p3p4_esr0_read (P3P4_DCR_BASE+0x0)
+#define p3p4_esr0_write (P3P4_DCR_BASE+0x1)
+#define p3p4_eadr (P3P4_DCR_BASE+0x2)
+#define p3p4_euadr (P3P4_DCR_BASE+0x3)
+#define p3p4_esr1_read (P3P4_DCR_BASE+0x4)
+#define p3p4_esr1_write (P3P4_DCR_BASE+0x5)
+#define p3p4_confg (P3P4_DCR_BASE+0x6)
+#define p3p4_pic (P3P4_DCR_BASE+0x7)
+#define p3p4_peir (P3P4_DCR_BASE+0x8)
+#define p3p4_rev (P3P4_DCR_BASE+0xA)
+
+/* PLB3 Arbiter */
+#define PLB3_DCR_BASE 0x070
+#define plb3_revid (PLB3_DCR_BASE+0x2)
+#define plb3_besr (PLB3_DCR_BASE+0x3)
+#define plb3_bear (PLB3_DCR_BASE+0x6)
+#define plb3_acr (PLB3_DCR_BASE+0x7)
+
+/* PLB4 Arbiter - PowerPC440EP Pass1 */
+#define PLB4_DCR_BASE 0x080
+#define plb4_revid (PLB4_DCR_BASE+0x2)
+#define plb4_acr (PLB4_DCR_BASE+0x3)
+#define plb4_besr (PLB4_DCR_BASE+0x4)
+#define plb4_bearl (PLB4_DCR_BASE+0x6)
+#define plb4_bearh (PLB4_DCR_BASE+0x7)
+
+/* Nebula PLB4 Arbiter - PowerPC440EP */
+#define PLB_ARBITER_BASE 0x80
+
+#define plb0_revid (PLB_ARBITER_BASE+ 0x00)
+#define plb0_acr (PLB_ARBITER_BASE+ 0x01)
+#define plb0_acr_ppm_mask 0xF0000000
+#define plb0_acr_ppm_fixed 0x00000000
+#define plb0_acr_ppm_fair 0xD0000000
+#define plb0_acr_hbu_mask 0x08000000
+#define plb0_acr_hbu_disabled 0x00000000
+#define plb0_acr_hbu_enabled 0x08000000
+#define plb0_acr_rdp_mask 0x06000000
+#define plb0_acr_rdp_disabled 0x00000000
+#define plb0_acr_rdp_2deep 0x02000000
+#define plb0_acr_rdp_3deep 0x04000000
+#define plb0_acr_rdp_4deep 0x06000000
+#define plb0_acr_wrp_mask 0x01000000
+#define plb0_acr_wrp_disabled 0x00000000
+#define plb0_acr_wrp_2deep 0x01000000
+
+#define plb0_besrl (PLB_ARBITER_BASE+ 0x02)
+#define plb0_besrh (PLB_ARBITER_BASE+ 0x03)
+#define plb0_bearl (PLB_ARBITER_BASE+ 0x04)
+#define plb0_bearh (PLB_ARBITER_BASE+ 0x05)
+#define plb0_ccr (PLB_ARBITER_BASE+ 0x08)
+
+#define plb1_acr (PLB_ARBITER_BASE+ 0x09)
+#define plb1_acr_ppm_mask 0xF0000000
+#define plb1_acr_ppm_fixed 0x00000000
+#define plb1_acr_ppm_fair 0xD0000000
+#define plb1_acr_hbu_mask 0x08000000
+#define plb1_acr_hbu_disabled 0x00000000
+#define plb1_acr_hbu_enabled 0x08000000
+#define plb1_acr_rdp_mask 0x06000000
+#define plb1_acr_rdp_disabled 0x00000000
+#define plb1_acr_rdp_2deep 0x02000000
+#define plb1_acr_rdp_3deep 0x04000000
+#define plb1_acr_rdp_4deep 0x06000000
+#define plb1_acr_wrp_mask 0x01000000
+#define plb1_acr_wrp_disabled 0x00000000
+#define plb1_acr_wrp_2deep 0x01000000
+
+#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A)
+#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B)
+#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
+#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
+
+#else
+
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
@@ -265,6 +364,7 @@
#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
#endif /* CONFIG_440_GX */
+#endif /* !CONFIG_440_EP !CONFIG_440_GR*/
/*-----------------------------------------------------------------------------
| On-Chip Buses
@@ -417,10 +517,8 @@
#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
-#if defined(CONFIG_440_GX)
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
-#endif /* CONFIG_440_GX */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#if defined(CONFIG_440_GX)
@@ -893,6 +991,23 @@
#define SDR0_MFR_ECS_MASK 0x10000000
#define SDR0_MFR_ECS_INTERNAL 0x10000000
+#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+
#define SDR0_SRST_BGO 0x80000000
#define SDR0_SRST_PLB 0x40000000
#define SDR0_SRST_EBC 0x20000000
@@ -927,7 +1042,7 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440_GX)
+#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -945,7 +1060,7 @@
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
-#else /* !CONFIG_440_GX */
+#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */
#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
@@ -956,6 +1071,19 @@
#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
@@ -1023,6 +1151,34 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PCI Local Configuration Registers
+ --------------------------------- */
+#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */
+
+/* PCI Master Local Configuration Registers */
+#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
+#define PCIX0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
+#define PCIX0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
+#define PCIX0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
+#define PCIX0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
+#define PCIX0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
+#define PCIX0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
+#define PCIX0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
+#define PCIX0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
+#define PCIX0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
+#define PCIX0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
+#define PCIX0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
+
+/* PCI Target Local Configuration Registers */
+#define PCIX0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */
+#define PCIX0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
+#define PCIX0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */
+#define PCIX0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
+
+#else
+
#define PCIX0_VENDID (PCIX0_CFGBASE + PCI_VENDOR_ID )
#define PCIX0_DEVID (PCIX0_CFGBASE + PCI_DEVICE_ID )
#define PCIX0_CMD (PCIX0_CFGBASE + PCI_COMMAND )
@@ -1079,6 +1235,52 @@
#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
+#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */
+
+/******************************************************************************
+ * GPIO macro register defines
+ ******************************************************************************/
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00)
+#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00)
+
+#define GPIO0_OR (GPIO_BASE0+0x0)
+#define GPIO0_TCR (GPIO_BASE0+0x4)
+#define GPIO0_OSRL (GPIO_BASE0+0x8)
+#define GPIO0_OSRH (GPIO_BASE0+0xC)
+#define GPIO0_TSRL (GPIO_BASE0+0x10)
+#define GPIO0_TSRH (GPIO_BASE0+0x14)
+#define GPIO0_ODR (GPIO_BASE0+0x18)
+#define GPIO0_IR (GPIO_BASE0+0x1C)
+#define GPIO0_RR1 (GPIO_BASE0+0x20)
+#define GPIO0_RR2 (GPIO_BASE0+0x24)
+#define GPIO0_RR3 (GPIO_BASE0+0x28)
+#define GPIO0_ISR1L (GPIO_BASE0+0x30)
+#define GPIO0_ISR1H (GPIO_BASE0+0x34)
+#define GPIO0_ISR2L (GPIO_BASE0+0x38)
+#define GPIO0_ISR2H (GPIO_BASE0+0x3C)
+#define GPIO0_ISR3L (GPIO_BASE0+0x40)
+#define GPIO0_ISR3H (GPIO_BASE0+0x44)
+
+#define GPIO1_OR (GPIO_BASE1+0x0)
+#define GPIO1_TCR (GPIO_BASE1+0x4)
+#define GPIO1_OSRL (GPIO_BASE1+0x8)
+#define GPIO1_OSRH (GPIO_BASE1+0xC)
+#define GPIO1_TSRL (GPIO_BASE1+0x10)
+#define GPIO1_TSRH (GPIO_BASE1+0x14)
+#define GPIO1_ODR (GPIO_BASE1+0x18)
+#define GPIO1_IR (GPIO_BASE1+0x1C)
+#define GPIO1_RR1 (GPIO_BASE1+0x20)
+#define GPIO1_RR2 (GPIO_BASE1+0x24)
+#define GPIO1_RR3 (GPIO_BASE1+0x28)
+#define GPIO1_ISR1L (GPIO_BASE1+0x30)
+#define GPIO1_ISR1H (GPIO_BASE1+0x34)
+#define GPIO1_ISR2L (GPIO_BASE1+0x38)
+#define GPIO1_ISR2H (GPIO_BASE1+0x3C)
+#define GPIO1_ISR3L (GPIO_BASE1+0x40)
+#define GPIO1_ISR3H (GPIO_BASE1+0x44)
+#endif
+
/*
* Macros for accessing the indirect EBC registers
*/
@@ -1111,12 +1313,17 @@
unsigned long pllFwdDivB;
unsigned long pllFbkDiv;
unsigned long pllOpbDiv;
+ unsigned long pllPciDiv;
unsigned long pllExtBusDiv;
unsigned long freqVCOMhz; /* in MHz */
unsigned long freqProcessor;
+ unsigned long freqTmrClk;
unsigned long freqPLB;
unsigned long freqOPB;
unsigned long freqEPB;
+ unsigned long freqPCI;
+ unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
+ unsigned long pciClkSync; /* PCI clock is synchronous */
} PPC440_SYS_INFO;
#endif /* _ASMLANGUAGE */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 1bcf673..c4b16e8 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -547,7 +547,7 @@
bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
#elif defined(CONFIG_XILINX_ML300)