microblaze: fix style in board.c
Make microblaze's board.c checkpatch clean.
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 815fb5a..3a6d81a 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -74,15 +74,15 @@
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
- gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
- bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
+ gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
+ bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
- GENERATED_BD_INFO_SIZE);
#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
asm ("nop"); /* FIXME gd is not initialize - wait */
- memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
- memset ((void *)bd, 0, GENERATED_BD_INFO_SIZE);
+ memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
+ memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
gd->bd = bd;
gd->baudrate = CONFIG_BAUDRATE;
bd->bi_baudrate = CONFIG_BAUDRATE;
@@ -108,57 +108,55 @@
* aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
* as our monitory code is run from SDRAM
*/
- mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
+ mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
serial_initialize();
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- WATCHDOG_RESET ();
- if ((*init_fnc_ptr) () != 0) {
- hang ();
- }
+ WATCHDOG_RESET();
+ if ((*init_fnc_ptr) () != 0)
+ hang();
}
#ifdef CONFIG_OF_CONTROL
/* For now, put this check after the console is ready */
- if (fdtdec_prepare_fdt()) {
- panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
- "doc/README.fdt-control");
- } else
+ if (fdtdec_prepare_fdt())
+ panic("** No FDT - please see doc/README.fdt-control");
+ else
printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
#endif
- puts ("SDRAM :\n");
- printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
- printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
- printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
+ puts("SDRAM :\n");
+ printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
+ printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
+ printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
#if defined(CONFIG_CMD_FLASH)
- puts ("Flash: ");
+ puts("Flash: ");
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
flash_size = flash_init();
if (bd->bi_flashstart && flash_size > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
- print_size (flash_size, "");
+ print_size(flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
if (getenv_yesno("flashchecksum") == 1) {
- printf (" CRC: %08X",
- crc32(0, (const u8 *)bd->bi_flashstart,
- flash_size)
+ printf(" CRC: %08X",
+ crc32(0, (const u8 *)bd->bi_flashstart,
+ flash_size)
);
}
- putc ('\n');
+ putc('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
- print_size (flash_size, "\n");
+ print_size(flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
bd->bi_flashsize = flash_size;
bd->bi_flashoffset = bd->bi_flashstart + flash_size;
} else {
- puts ("Flash init FAILED");
+ puts("Flash init FAILED");
bd->bi_flashstart = 0;
bd->bi_flashsize = 0;
bd->bi_flashoffset = 0;
@@ -166,10 +164,10 @@
#endif
/* relocate environment function pointers etc. */
- env_relocate ();
+ env_relocate();
/* Initialize stdio devices */
- stdio_init ();
+ stdio_init();
/* Initialize the jump table for applications */
jumptable_init();
@@ -193,13 +191,14 @@
/* main_loop */
for (;;) {
- WATCHDOG_RESET ();
- main_loop ();
+ WATCHDOG_RESET();
+ main_loop();
}
}
-void hang (void)
+void hang(void)
{
- puts ("### ERROR ### Please RESET the board ###\n");
- for (;;) ;
+ puts("### ERROR ### Please RESET the board ###\n");
+ for (;;)
+ ;
}