.. SPDX-License-Identifier: GPL-2.0+
.. sectionauthor:: Dzmitry Sankouski <dsankouski@gmail.com>

Snapdragon 845
==============

About this
----------

This document describes the information about Qualcomm Snapdragon 845
supported boards and it's usage steps.

SDM845 - hi-end qualcomm chip, introduced in late 2017.
Mostly used in flagship phones and tablets of 2018.

The current boot flow support loading u-boot as an Android boot image via
Qualcomm's UEFI-based ABL (Android) Bootloader.

Installation
------------

Build
^^^^^

Setup ``CROSS_COMPILE`` for aarch64 and build U-Boot for your board::

	$ export CROSS_COMPILE=<aarch64 toolchain prefix>
	$ make <your board name here, see Boards section>_defconfig
	$ make

This will build ``u-boot.bin`` in the configured output directory.

Generate FIT image
^^^^^^^^^^^^^^^^^^

See doc/uImage.FIT for more details

Pack android boot image
^^^^^^^^^^^^^^^^^^^^^^^

We'll assemble android boot image with ``u-boot.bin`` instead of linux kernel,
and FIT image instead of ``initramfs``. Android bootloader expect gzipped kernel
with appended dtb, so let's mimic linux to satisfy stock bootloader.

Boards
------

starqlte
^^^^^^^^

The starqltechn is a production board for Samsung S9 (SM-G9600) phone,
based on the Qualcomm SDM845 SoC.

Steps:

- Build u-boot::

	$ export CROSS_COMPILE=<aarch64 toolchain prefix>
	$ make starqltechn_defconfig
	$ make

- Create dump dtb::

	workdir=/tmp/prepare_payload
	mkdir -p "$workdir"
	cd "$workdir"
	mock_dtb="$workdir"/payload_mock.dtb

	dtc -I dts -O dtb -o "$mock_dtb" << EOF
	/dts-v1/;
	/ {
		memory {
			/* We expect the bootloader to fill in the size */
			reg = <0 0 0 0>;
		};

		chosen { };
	};
	EOF

- gzip u-boot::

	gzip u-boot.bin

- Append dtb to gzipped u-boot::

	cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb

- Now we've got everything to build android boot image::

	mkbootimg --base 0x0 --kernel_offset 0x00008000 \
	--ramdisk_offset 0x02000000 --tags_offset 0x01e00000 \
	--pagesize 4096 --second_offset 0x00f00000 \
	--ramdisk "$fit_image" \
	--kernel u-boot.bin.gz-dtb \
	-o boot.img

- Flash image with your phone's flashing method.

More information can be found on the `Samsung S9 page`_.

dragonboard845c
^^^^^^^^^^^^^^^

The dragonboard845c is a Qualcomm Robotics RB3 Development Platform, based on
the Qualcomm SDM845 SoC.

Steps:

- Build u-boot::

	$ export CROSS_COMPILE=<aarch64 toolchain prefix>
	$ make dragonboard845c_defconfig
	$ make

- Create dummy dtb::

	workdir=/tmp/prepare_payload
	mkdir -p "$workdir"
	mock_dtb="$workdir"/payload_mock.dtb

	dtc -I dts -O dtb -o "$mock_dtb" << EOF
	/dts-v1/;
	/ {
		#address-cells = <2>;
		#size-cells = <2>;

		memory@80000000 {
			device_type = "memory";
			/* We expect the bootloader to fill in the size */
			reg = <0 0x80000000 0 0>;
		};

		chosen { };
	};
	EOF

- gzip u-boot::

	gzip u-boot.bin

- Append dtb to gzipped u-boot::

	 cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb

- A ``db845c.its`` file can be found in ``board/qualcomm/dragonboard845c/``
  directory. It expects a folder as ``db845c_imgs/`` in the main directory
  containing pre-built kernel, dts and ramdisk images. See ``db845c.its``
  for full path to images::

	mkimage -f db845c.its db845c.itb

- Now we've got everything to build android boot image::

	mkbootimg --kernel u-boot.bin.gz-dtb --ramdisk db845c.itb \
	--output boot.img --pagesize 4096 --base 0x80000000

- Flash boot.img using db845c fastboot method:

  .. code-block:: bash

      sudo fastboot flash boot boot.img

More information can be found on the `DragonBoard 845c page`_.

.. _Samsung S9 page: https://en.wikipedia.org/wiki/Samsung_Galaxy_S9
.. _DragonBoard 845c page: https://www.96boards.org/product/rb3-platform/