serial_mx31: allow it to work with mx27 too and rename to serial_mxc
UART hardware on i.MX27 is the same as on the i.MX31 so we just
need to provide the driver with correct address of the registers.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 9ac6eec..74f54c0 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -60,7 +60,7 @@
* Hardware drivers
*/
-#define CONFIG_MX31_UART 1
+#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
#define CONFIG_HARD_SPI 1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index cbc0b92..cb42a7c 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -64,7 +64,7 @@
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
-#define CONFIG_MX31_UART 1
+#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
/* allow to overwrite serial and ethaddr */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index c31c06a..363ea1b 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -57,7 +57,7 @@
* Hardware drivers
*/
-#define CONFIG_MX31_UART 1
+#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
#define CONFIG_HARD_SPI 1
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 7e67185..64d0214 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -49,7 +49,7 @@
* Hardware drivers
*/
-#define CONFIG_MX31_UART 1
+#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
/* FPGA */