am33xx: init OTG hardware and new musb gadget driver
AM33xx has support for dual port MUSB OTG controller. This patch
adds initialization for the controller using new MUSB gadget
driver and ether gadget.
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123c..da5bc73 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -63,3 +68,83 @@
/* Not yet implemented */
return;
}
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+ (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN (1 << 0)
+#define CM_PHY_OTG_PWRDN (1 << 1)
+#define OTGVDET_EN (1 << 19)
+#define OTGSESSENDEN (1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+ if (on) {
+ clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+ OTGVDET_EN | OTGSESSENDEN);
+ } else {
+ clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+ }
+}
+
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+ am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+ .set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+ .mode = CONFIG_AM335X_USB0_MODE,
+ .config = &musb_config,
+ .power = 50,
+ .platform_ops = &musb_dsps_ops,
+ .board_data = &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+ am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+ .set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+ .mode = CONFIG_AM335X_USB1_MODE,
+ .config = &musb_config,
+ .power = 50,
+ .platform_ops = &musb_dsps_ops,
+ .board_data = &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+ musb_register(&otg0_plat, &otg0_board_data,
+ (void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+ musb_register(&otg1_plat, &otg1_board_data,
+ (void *)AM335X_USB1_OTG_BASE);
+#endif
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb6..0b4cb4e 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
#define CLK_MODE_MASK 0xfffffff8
#define CLK_DIV_SEL 0xFFFFFFE0
#define CPGMAC0_IDLE 0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL 0x300
const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@
writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
;
+
+ /* MUSB */
+ writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+ while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+ ;
}
static void mpu_pll_config(void)
@@ -290,6 +296,8 @@
while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
;
+
+ writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
}
void ddr_pll_config(unsigned int ddrpll_m)