ARM: dts: rmobile: Import proper DTS for H2 Stout
Replace the placeholder DTS for R8A7790 H2 Stout with a proper
DTS from Linux next .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/arch/arm/dts/r8a7790-stout.dts b/arch/arm/dts/r8a7790-stout.dts
index eb82934..301cb72 100644
--- a/arch/arm/dts/r8a7790-stout.dts
+++ b/arch/arm/dts/r8a7790-stout.dts
@@ -8,19 +8,112 @@
/dts-v1/;
#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Stout";
compatible = "renesas,stout", "renesas,r8a7790";
aliases {
- serial0 = &scif0;
+ serial0 = &scifa0;
};
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ };
+ led5 {
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fixedregulator3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ osc1_clk: osc1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ osc4_clk: osc4-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
+ <&osc1_clk>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ port@1 {
+ lvds_connector0: endpoint {
+ };
+ };
+ port@2 {
+ lvds_connector1: endpoint {
+ };
+ };
+ };
};
&extal_clk {
@@ -28,27 +121,244 @@
};
&pfc {
+
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
- scif0_pins: scif0 {
- groups = "scif0_data";
- function = "scif0";
+ du_pins: du {
+ groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
+ function = "du";
};
+ scifa0_pins: scifa0 {
+ groups = "scifa0_data_b";
+ function = "scifa0";
+ };
+
scif_clk_pins: scif_clk {
groups = "scif_clk";
function = "scif_clk";
};
+
+ ether_pins: ether {
+ groups = "eth_link", "eth_mdio", "eth_rmii";
+ function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ groups = "intc_irq1";
+ function = "intc";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ qspi_pins: qspi {
+ groups = "qspi_ctrl", "qspi_data4";
+ function = "qspi";
+ };
+
+ iic2_pins: iic2 {
+ groups = "iic2_b";
+ function = "iic2";
+ };
+
+ iic3_pins: iic3 {
+ groups = "iic3";
+ function = "iic3";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
};
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&cmt0 {
status = "okay";
};
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash: flash@0 {
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "uboot";
+ reg = <0x00080000 0x00040000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "uboot-env";
+ reg = <0x000c0000 0x00040000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "flash";
+ reg = <0x00100000 0x03f00000>;
+ };
+ };
+ };
+};
+
+&scifa0 {
+ pinctrl-0 = <&scifa0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&scif_clk {
clock-frequency = <14745600>;
};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic2 {
+ status = "okay";
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "default";
+
+ clock-frequency = <100000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&osc4_clk>;
+ clock-names = "cec";
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+};
+
+&iic3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&iic3_pins>;
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+
+ vdd_dvfs: regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd: regulator@70 {
+ compatible = "dlg,da9210";
+ reg = <0x70>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};