arm: dts: j7200: dts sync with Linux 6.6-rc1
Sync j7200 dts with Linux 6.6-rc1
- k3-j7200-r5-common-proc-board.dts now inherits from
k3-j7200-common-proc-board.dts instead of k3-j7200-som-p0.dtsi. This
allows us to trim down the r5 file considerably by using existing
properties
- remove pimux nodes from r5 file
- remove duplicate nodes & node properties from r5/u-boot files
- mcu_timer0 now used instead of timer1
mcu_timer0 device id added to dev-data.c file in order to work
- remove cpsw node
This node is no longer required since the compatible is now fixed
- remove dummy_clock_19_2_mhz
This node wasn't being used anyhere, so it was removed
- remove dummy_clock_200mhz
main_sdhci0 & main_sdhci1 no longer need dummy clock for eMMC/SD
- fix secure proxy node
mcu_secproxy changed to used secure_prxy_mcu which is already
defined in k3-j7200-mcu-wakeup.dtsi
- removed &mcu_ringacc property override since they're present in
v6.6-rc1
Signed-off-by: Reid Tonking <reidt@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi
index 3472444..5a300d4 100644
--- a/arch/arm/dts/k3-j7200-som-p0.dtsi
+++ b/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -83,7 +83,7 @@
};
&wkup_pmx0 {
- mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
+ mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
@@ -101,7 +101,7 @@
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
@@ -118,8 +118,17 @@
};
};
+&wkup_pmx2 {
+ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+ >;
+ };
+};
+
&main_pmx0 {
- main_i2c0_pins_default: main-i2c0-pins-default {
+ main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
@@ -140,10 +149,42 @@
flash@0,0 {
compatible = "cypress,hyperflash", "cfi-flash";
reg = <0x00 0x00 0x4000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "hbmc.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "hbmc.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition@300000 {
+ label = "hbmc.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition@700000 {
+ label = "hbmc.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "hbmc.rootfs";
+ reg = <0x800000 0x3800000>;
+ };
+ };
};
};
&mailbox0_cluster0 {
+ status = "okay";
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -158,6 +199,7 @@
};
&mailbox0_cluster1 {
+ status = "okay";
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
@@ -171,66 +213,26 @@
};
};
-&mailbox0_cluster2 {
- status = "disabled";
-};
-
-&mailbox0_cluster3 {
- status = "disabled";
-};
-
-&mailbox0_cluster4 {
- status = "disabled";
-};
-
-&mailbox0_cluster5 {
- status = "disabled";
-};
-
-&mailbox0_cluster6 {
- status = "disabled";
-};
-
-&mailbox0_cluster7 {
- status = "disabled";
-};
-
-&mailbox0_cluster8 {
- status = "disabled";
-};
-
-&mailbox0_cluster9 {
- status = "disabled";
-};
-
-&mailbox0_cluster10 {
- status = "disabled";
-};
-
-&mailbox0_cluster11 {
- status = "disabled";
-};
-
&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
};
&mcu_r5fss0_core1 {
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
};
&main_r5fss0_core0 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
};
&main_r5fss0_core1 {
- mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
};
@@ -252,11 +254,24 @@
};
};
+&wkup_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
&ospi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
@@ -267,7 +282,46 @@
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
- #address-cells = <1>;
- #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "ospi.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition@300000 {
+ label = "ospi.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition@700000 {
+ label = "ospi.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition@740000 {
+ label = "ospi.env.backup";
+ reg = <0x740000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
};
};