ARM: remove broken "modnet50" board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Thomas Elste <info@elste.org>
diff --git a/doc/README.modnet50 b/doc/README.modnet50
deleted file mode 100644
index 2ac3c8f..0000000
--- a/doc/README.modnet50
+++ /dev/null
@@ -1,62 +0,0 @@
-U-BOOT Port for FSForth ModNET50 Board
---------------------------------------
-
-author: Thomas Elste <info@elste.org>
- IMMS gGmbH <www.imms.de>
-
-The port based upon an early (partial complete)
-armboot-port from Stephan Linz for the ModNET50 Board.
-
-
-Overview:
-
-- board with Netsilicon NET+50 ARM7TDMI CPU without MMU
-- 16 MB SDRAM
-- 2 MB Flash (MBL29LV160BE)
-- 10/100 Ethernet PHY (LXT971A)
-
-
-Current Configuration (include/configs/modnet50.h):
-
-Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
- 0x10000000 - 0x101FFFFF 2M Flash
-
-The Flash uses a BB-Architectur with 35 sectors
-(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
-the first 5 sectors.
-
-The environment is located at the end of the 4th Flash
-sector (0x1001C000-0x1001FFFF).
-
-Build:
-
-U-boot should be build by using the ELDK Toolchain (arm-linux-*).
-
- make modnet50_config
- make
-
-
-Status:
-
-Everything seems to work fine. Booting images was tested by
-booting uCLinux (with and without a separate ramdisk image) from
-flash.
-
-
-Files:
-
-arch/arm/cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
-
-board/modnet50/lowlevel_init.S .. memory setup for ModNET50
-board/modnet50/flash.c .. flash routines
-board/modnet50/modnet50.c .. some board init stuff
-
-drivers/net/netarm_eth.c .. ethernet driver for the NET+50 CPU
-drivers/net/netarm_eth.h .. header for ethernet driver
-
-include/configs/modnet50.h .. configuration file for ModNET50
-
-include/netarm_*.h .. register and macro definitions for
- the NETARM CPU family
-
-doc/README.modnet50 .. this readme
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 44b43ad..2a9b1b4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+modnet50 arm arm720t - 2011-09-05 Thomas Elste <info@elste.org>
lpc2292sodimm arm arm720t - 2011-09-05
lart arm sa1100 - 2011-09-05 Alex Züpke <azu@sysgo.de>
impa7 arm arm720t - 2011-09-05 Marius Gröger <mag@sysgo.de>