ram: rk3399: Fix dram setting to make dram more stable
There are some code different with rockchip vendor code which may lead
to different bugs, including:
1) Fix setting error about LPDDR3 dram size ODT.
2) Set phy io speed to 0x2.
3) Fix setting error about phy_pad_fdbk_drive.
4) Fix setting error about PI_WDQLVL_VREF_EN
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 47552fa..7b2bba0 100644
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -44,6 +44,11 @@
#define CS0_MR22_VAL 0
#define CS1_MR22_VAL 3
+/* LPDDR3 DRAM DS */
+#define LPDDR3_DS_34 0x1
+#define LPDDR3_DS_40 0x2
+#define LPDDR3_DS_48 0x3
+
#define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \
((n) << (8 + (ch) * 4)))
#define CRU_SFTRST_DDR_PHY(ch, n) ((0x1 << (9 + 16 + (ch) * 4)) | \
@@ -291,7 +296,8 @@
if (sdram_ch->cap_info.ddrconfig < 2 ||
sdram_ch->cap_info.ddrconfig == 4)
row = 16;
- else if (sdram_ch->cap_info.ddrconfig == 3)
+ else if (sdram_ch->cap_info.ddrconfig == 3 ||
+ sdram_ch->cap_info.ddrconfig == 5)
row = 14;
else
row = 15;
@@ -335,11 +341,12 @@
const struct rk3399_sdram_params *params, u32 mr5)
{
u32 *denali_phy = chan->publ->denali_phy;
+ u32 *denali_ctl = chan->pctl->denali_ctl;
u32 vref_mode_dq, vref_value_dq, vref_mode_ac, vref_value_ac;
u32 mode_sel;
- u32 reg_value;
- u32 drv_value, odt_value;
u32 speed;
+ u32 reg_value;
+ u32 ds_value, odt_value;
/* vref setting & mode setting */
if (params->base.dramtype == LPDDR4) {
@@ -365,12 +372,12 @@
} else if (params->base.dramtype == LPDDR3) {
if (params->base.odt == 1) {
vref_mode_dq = 0x5; /* LPDDR3 ODT */
- drv_value = (readl(&denali_phy[6]) >> 12) & 0xf;
+ ds_value = readl(&denali_ctl[138]) & 0xf;
odt_value = (readl(&denali_phy[6]) >> 4) & 0xf;
- if (drv_value == PHY_DRV_ODT_48) {
+ if (ds_value == LPDDR3_DS_48) {
switch (odt_value) {
case PHY_DRV_ODT_240:
- vref_value_dq = 0x16;
+ vref_value_dq = 0x1B;
break;
case PHY_DRV_ODT_120:
vref_value_dq = 0x26;
@@ -382,7 +389,7 @@
debug("Invalid ODT value.\n");
return -EINVAL;
}
- } else if (drv_value == PHY_DRV_ODT_40) {
+ } else if (ds_value == LPDDR3_DS_40) {
switch (odt_value) {
case PHY_DRV_ODT_240:
vref_value_dq = 0x19;
@@ -397,7 +404,7 @@
debug("Invalid ODT value.\n");
return -EINVAL;
}
- } else if (drv_value == PHY_DRV_ODT_34_3) {
+ } else if (ds_value == LPDDR3_DS_34) {
switch (odt_value) {
case PHY_DRV_ODT_240:
vref_value_dq = 0x17;
@@ -509,14 +516,7 @@
}
/* speed setting */
- if (params->base.ddr_freq < 400)
- speed = 0x0;
- else if (params->base.ddr_freq < 800)
- speed = 0x1;
- else if (params->base.ddr_freq < 1200)
- speed = 0x2;
- else
- speed = 0x3;
+ speed = 0x2;
/* PHY_924 PHY_PAD_FDBK_DRIVE */
clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21);
@@ -739,9 +739,9 @@
/* phy_pad_fdbk_drive 23bit DENALI_PHY_924/925 */
clrsetbits_le32(&denali_phy[924], 0xff,
- tsel_wr_select_dq_n | (tsel_wr_select_dq_p << 4));
+ tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 4));
clrsetbits_le32(&denali_phy[925], 0xff,
- tsel_rd_select_n | (tsel_rd_select_p << 4));
+ tsel_wr_select_dq_n | (tsel_wr_select_dq_p << 4));
/* phy_dq_tsel_enable_X 3bits DENALI_PHY_5/133/261/389 offset_16 */
reg_value = (tsel_rd_en | (tsel_wr_en << 1) | (tsel_idle_en << 2))
@@ -1340,10 +1340,9 @@
/*
* disable PI_WDQLVL_VREF_EN before wdq leveling?
- * PI_181 PI_WDQLVL_VREF_EN:RW:8:1
+ * PI_117 PI_WDQLVL_VREF_EN:RW:8:1
*/
- clrbits_le32(&denali_pi[181], 0x1 << 8);
-
+ clrbits_le32(&denali_pi[117], 0x1 << 8);
/* PI_124 PI_WDQLVL_EN:RW:16:2 */
clrsetbits_le32(&denali_pi[124], 0x3 << 16, 0x2 << 16);