include/configs/xupv2p.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2007 Czech Technical University.
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include "../board/xilinx/xupv2p/xparameters.h"

 #define	CONFIG_MICROBLAZE	1	/* MicroBlaze CPU */
 #define	CONFIG_XUPV2P		1

 /* uart */
 #ifdef XILINX_UARTLITE_BASEADDR
 #define	XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
 #else
 #ifdef XILINX_UART16550_BASEADDR
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
 #define CFG_NS16550_REG_SIZE	4
 #define CONFIG_CONS_INDEX	1
 #define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
 #define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ

 #define	CONFIG_BAUDRATE		115200
 #define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
 #endif
 #endif

 /* ethernet */
 #ifdef XILINX_EMAC_BASEADDR
 #define XILINX_EMAC	1
 #else
 #ifdef XILINX_EMACLITE_BASEADDR
 #define XILINX_EMACLITE	1
 #endif
 #endif
 #undef ET_DEBUG

 /*
  * setting reset address
  *
  * TEXT_BASE is set to place, where the U-BOOT run in RAM, but
  * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS
  * to FLASH memory and after loading bitstream jump to FLASH.
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
 /* #define	CFG_RESET_ADDRESS	0x36000000 */

 /* gpio */
 #ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
 #endif

 /* interrupt controller */
 #define	CFG_INTC_0		1
 #define	CFG_INTC_0_ADDR		XILINX_INTC_BASEADDR
 #define	CFG_INTC_0_NUM		XILINX_INTC_NUM_INTR_INPUTS

 /* timer */
 #define	CFG_TIMER_0		1
 #define	CFG_TIMER_0_ADDR	XILINX_TIMER_BASEADDR
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )

 /*
  * memory layout - Example
  * TEXT_BASE = 0x3600_0000;
  * CFG_SRAM_BASE = 0x3000_0000;
  * CFG_SRAM_SIZE = 0x1000_0000;
  *
  * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000
  * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000
  * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000
  *
  * 0x3000_0000	CFG_SDRAM_BASE
  *					FREE
  * 0x3600_0000	TEXT_BASE
  *		U-BOOT code
  * 0x3602_0000
  *					FREE
  *
  *					STACK
  * 0x3FF7_F000	CFG_MALLOC_BASE
  *					MALLOC_AREA	256kB	Alloc
  * 0x3FFB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x3FFF_F000	CFG_GBL_DATA_OFFSET
  * 					GLOBAL_DATA	4kB	bd, gd
  * 0x4000_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */

 /* ddr sdram - main memory */
 #define	CFG_SDRAM_BASE		XILINX_RAM_START
 #define	CFG_SDRAM_SIZE		XILINX_RAM_SIZE
 #define	CFG_MEMTEST_START	CFG_SDRAM_BASE
 #define	CFG_MEMTEST_END		(CFG_SDRAM_BASE + 0x1000)

 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 #define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */

 /* monitor code */
 #define	SIZE			0x40000
 #define	CFG_MONITOR_LEN		SIZE
 #define	CFG_MONITOR_BASE	(CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
 #define	CFG_MONITOR_END		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define	CFG_MALLOC_LEN		SIZE
 #define	CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)

 /* stack */
 #define	CFG_INIT_SP_OFFSET	CFG_MALLOC_BASE

 #define	CFG_NO_FLASH		1
 #define	CFG_ENV_IS_NOWHERE	1
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_IMI
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_RUN
 #define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_LOADS
 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MISC
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MFSL

 #ifdef XILINX_SYSACE_BASEADDR
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #endif

 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
 #define	CFG_CBSIZE	512	/* size of console buffer */
 #define	CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
 #define	CFG_MAXARGS	15	/* max number of command args */
 #define	CFG_LONGHELP
 #define	CFG_LOAD_ADDR	0x12000000 /* default load address */

 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"xupv2p"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
 #define	CONFIG_GATEWAYIP 	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD

 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000

 #define CONFIG_PREBOOT	"echo U-BOOT by mONStR;"	\
 	"base 0;" \
 	"echo"

 /* system ace */
 #ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
 #endif

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2007 Czech Technical University.
	*
	* Michal SIMEK <monstr@monstr.eu>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include "../board/xilinx/xupv2p/xparameters.h"

	#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
	#define CONFIG_XUPV2P 1

	/* uart */
	#ifdef XILINX_UARTLITE_BASEADDR
	#define XILINX_UARTLITE
	#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
	#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
	#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
	#else
	#ifdef XILINX_UART16550_BASEADDR
	#define CFG_NS16550
	#define CFG_NS16550_SERIAL
	#define CFG_NS16550_REG_SIZE 4
	#define CONFIG_CONS_INDEX 1
	#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
	#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ

	#define CONFIG_BAUDRATE 115200
	#define CFG_BAUDRATE_TABLE { 9600, 115200 }
	#endif
	#endif

	/* ethernet */
	#ifdef XILINX_EMAC_BASEADDR
	#define XILINX_EMAC 1
	#else
	#ifdef XILINX_EMACLITE_BASEADDR
	#define XILINX_EMACLITE 1
	#endif
	#endif
	#undef ET_DEBUG

	/*
	* setting reset address
	*
	* TEXT_BASE is set to place, where the U-BOOT run in RAM, but
	* if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS
	* to FLASH memory and after loading bitstream jump to FLASH.
	* U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
	* jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
	*/
	/* #define CFG_RESET_ADDRESS 0x36000000 */

	/* gpio */
	#ifdef XILINX_GPIO_BASEADDR
	#define CFG_GPIO_0 1
	#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
	#endif

	/* interrupt controller */
	#define CFG_INTC_0 1
	#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR
	#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS

	/* timer */
	#define CFG_TIMER_0 1
	#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR
	#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
	#define FREQUENCE XILINX_CLOCK_FREQ
	#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )

	/*
	* memory layout - Example
	* TEXT_BASE = 0x3600_0000;
	* CFG_SRAM_BASE = 0x3000_0000;
	* CFG_SRAM_SIZE = 0x1000_0000;
	*
	* CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000
	* CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000
	* CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000
	*
	* 0x3000_0000 CFG_SDRAM_BASE
	* FREE
	* 0x3600_0000 TEXT_BASE
	* U-BOOT code
	* 0x3602_0000
	* FREE
	*
	* STACK
	* 0x3FF7_F000 CFG_MALLOC_BASE
	* MALLOC_AREA 256kB Alloc
	* 0x3FFB_F000 CFG_MONITOR_BASE
	* MONITOR_CODE 256kB Env
	* 0x3FFF_F000 CFG_GBL_DATA_OFFSET
	* GLOBAL_DATA 4kB bd, gd
	* 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
	*/

	/* ddr sdram - main memory */
	#define CFG_SDRAM_BASE XILINX_RAM_START
	#define CFG_SDRAM_SIZE XILINX_RAM_SIZE
	#define CFG_MEMTEST_START CFG_SDRAM_BASE
	#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000)

	/* global pointer */
	#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
	#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */

	/* monitor code */
	#define SIZE 0x40000
	#define CFG_MONITOR_LEN SIZE
	#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
	#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
	#define CFG_MALLOC_LEN SIZE
	#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)

	/* stack */
	#define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE

	#define CFG_NO_FLASH 1
	#define CFG_ENV_IS_NOWHERE 1
	#define CFG_ENV_SIZE 0x1000
	#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_MEMORY
	#define CONFIG_CMD_IRQ
	#define CONFIG_CMD_BDI
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_IMI
	#define CONFIG_CMD_ECHO
	#define CONFIG_CMD_CACHE
	#define CONFIG_CMD_RUN
	#define CONFIG_CMD_AUTOSCRIPT
	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_LOADS
	#define CONFIG_CMD_LOADB
	#define CONFIG_CMD_MISC
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_MFSL

	#ifdef XILINX_SYSACE_BASEADDR
	#define CONFIG_CMD_EXT2
	#define CONFIG_CMD_FAT
	#endif

	/* Miscellaneous configurable options */
	#define CFG_PROMPT "U-Boot-mONStR> "
	#define CFG_CBSIZE 512 /* size of console buffer */
	#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
	#define CFG_MAXARGS 15 /* max number of command args */
	#define CFG_LONGHELP
	#define CFG_LOAD_ADDR 0x12000000 /* default load address */

	#define CONFIG_BOOTDELAY 30
	#define CONFIG_BOOTARGS "root=romfs"
	#define CONFIG_HOSTNAME "xupv2p"
	#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
	#define CONFIG_IPADDR 192.168.0.3
	#define CONFIG_SERVERIP 192.168.0.5
	#define CONFIG_GATEWAYIP 192.168.0.1
	#define CONFIG_ETHADDR 00:E0:0C:00:00:FD

	/* architecture dependent code */
	#define CFG_USR_EXCEP /* user exception */
	#define CFG_HZ 1000

	#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \
	"base 0;" \
	"echo"

	/* system ace */
	#ifdef XILINX_SYSACE_BASEADDR
	#define CONFIG_SYSTEMACE
	/* #define DEBUG_SYSTEMACE */
	#define SYSTEMACE_CONFIG_FPGA
	#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
	#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
	#define CONFIG_DOS_PARTITION
	#endif

	#endif /* __CONFIG_H */