turris_1x: Normalize Kconfig usage
We don't set many options in the board Kconfig entry file but instead
use defconfigs, select in some cases on the target itself, or update the
"default" options of the main entries when needed. In this case we can
remove most of the board Kconfig entries and just add them to the
defconfig like other platforms.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/turris_1x_nor_defconfig b/configs/turris_1x_nor_defconfig
index f06daaa..52819b1 100644
--- a/configs/turris_1x_nor_defconfig
+++ b/configs/turris_1x_nor_defconfig
@@ -1,7 +1,12 @@
CONFIG_PPC=y
CONFIG_TEXT_BASE=0xeff40000
CONFIG_SYS_MALLOC_F_LEN=0x1000
+CONFIG_NR_DRAM_BANKS=5
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_SYS_MONITOR_LEN=786432
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_ENV_ADDR=0xeff20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
# CONFIG_CMD_ERRATA is not set
@@ -10,6 +15,7 @@
CONFIG_L2_CACHE=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_AHCI=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
@@ -25,6 +31,7 @@
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run distro_bootcmd"
CONFIG_USE_PREBOOT=y
+CONFIG_PCI_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_EEPROM is not set
@@ -50,6 +57,9 @@
CONFIG_CMD_FS_UUID=y
CONFIG_OF_CONTROL=y
CONFIG_OF_INITIAL_DTB_READONLY=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth2"
# CONFIG_DM_DEVICE_REMOVE is not set
@@ -57,6 +67,7 @@
CONFIG_AHCI_PCI=y
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
+CONFIG_DDR_CLK_FREQ=66666666
CONFIG_CHIP_SELECTS_PER_CTRL=2
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xef001001
@@ -67,21 +78,45 @@
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xffa00801
CONFIG_SYS_OR3_PRELIM=0xfffe09f7
+CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_MISC=y
+CONFIG_ATSHA204A=y
# CONFIG_MMC_HW_PARTITIONING is not set
# CONFIG_MMC_VERBOSE is not set
+CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=128
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_ELBC=y
+CONFIG_NAND_FSL_ELBC_DT=y
CONFIG_MTD_UBI=y
+CONFIG_PHY_FIXED=y
CONFIG_DM_MDIO=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
CONFIG_NVME_PCI=y
+CONFIG_PCIE_FSL=y
CONFIG_SCSI=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_WDT=y
+CONFIG_WDT_MAX6370=y
+CONFIG_BCH=y
# CONFIG_BINMAN_FDT is not set
diff --git a/configs/turris_1x_sdcard_defconfig b/configs/turris_1x_sdcard_defconfig
index fb42e02..b402004 100644
--- a/configs/turris_1x_sdcard_defconfig
+++ b/configs/turris_1x_sdcard_defconfig
@@ -1,10 +1,20 @@
CONFIG_PPC=y
CONFIG_TEXT_BASE=0x11000000
CONFIG_SYS_MALLOC_F_LEN=0x1000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=5
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_SPL_TEXT_BASE=0xf8f80000
CONFIG_SYS_MONITOR_LEN=1048576
CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xffe04500
+CONFIG_DEBUG_UART_CLOCK=37500000
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_ENV_ADDR=0xeff20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR=y
@@ -16,6 +26,7 @@
CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
@@ -28,6 +39,8 @@
CONFIG_BOOTDELAY=3
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_USE_PREBOOT=y
+CONFIG_PCI_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SPL_MAX_SIZE=0x80200
CONFIG_SPL_PAD_TO=0x0
CONFIG_SPL_MMC_BOOT=y
@@ -36,6 +49,9 @@
CONFIG_SPL_RELOC_MALLOC=y
CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
CONFIG_SPL_TARGET="u-boot-with-spl.bin"
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_IMLS=y
@@ -66,6 +82,9 @@
CONFIG_CMD_FS_UUID=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="eth2"
CONFIG_NETCONSOLE=y
@@ -73,6 +92,7 @@
CONFIG_AHCI_PCI=y
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
+CONFIG_DDR_CLK_FREQ=66666666
CONFIG_CHIP_SELECTS_PER_CTRL=2
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xef001001
@@ -84,15 +104,37 @@
CONFIG_SYS_BR3_PRELIM=0xffa00801
CONFIG_SYS_OR3_PRELIM=0xfffe09f7
CONFIG_DM_PCA953X=y
+CONFIG_MPC8XXX_GPIO=y
CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
+CONFIG_MISC=y
+CONFIG_ATSHA204A=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x52
+CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=128
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_ELBC=y
+CONFIG_NAND_FSL_ELBC_DT=y
+CONFIG_PHY_FIXED=y
CONFIG_DM_MDIO=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
CONFIG_NVME_PCI=y
+CONFIG_PCIE_FSL=y
CONFIG_DM_RTC=y
CONFIG_RTC_DS1307=y
CONFIG_SCSI=y
@@ -102,5 +144,10 @@
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_EHCI_FSL=y
CONFIG_WDT=y
+CONFIG_WDT_MAX6370=y
CONFIG_FAT_WRITE=y
+CONFIG_BCH=y