doc: board: Move j721e document to doc/board/ti/ directory
Move j721e document from board/ti/j721e/README to
doc/board/ti/j721e_evm.rst after converting it to RST format.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
diff --git a/board/ti/j721e/README b/board/ti/j721e/README
deleted file mode 100644
index b1c9145..0000000
--- a/board/ti/j721e/README
+++ /dev/null
@@ -1,277 +0,0 @@
-Introduction:
--------------
-The J721e family of SoCs are part of K3 Multicore SoC architecture platform
-targeting automotive applications. They are designed as a low power, high
-performance and highly integrated device architecture, adding significant
-enhancement on processing power, graphics capability, video and imaging
-processing, virtualization and coherent memory support.
-
-The device is partitioned into three functional domains, each containing
-specific processing cores and peripherals:
-1. Wake-up (WKUP) domain:
- - Device Management and Security Controller (DMSC)
-2. Microcontroller (MCU) domain:
- - Dual Core ARM Cortex-R5F processor
-3. MAIN domain:
- - Dual core 64-bit ARM Cortex-A72
- - 2 x Dual cortex ARM Cortex-R5 subsystem
- - 2 x C66x Digital signal processor sub system
- - C71x Digital signal processor sub-system with MMA.
-
-More info can be found in TRM: http://www.ti.com/lit/pdf/spruil1
-
-Boot Flow:
-----------
-Boot flow is similar to that of AM65x SoC and extending it with remoteproc
-support. Below is the pictorial representation of boot flow:
-
-+------------------------------------------------------------------------+-----------------------+
-| DMSC | MCU R5 | A72 | MAIN R5/C66x/C7x |
-+------------------------------------------------------------------------+-----------------------+
-| +--------+ | | | |
-| | Reset | | | | |
-| +--------+ | | | |
-| : | | | |
-| +--------+ | +-----------+ | | |
-| | *ROM* |----------|-->| Reset rls | | | |
-| +--------+ | +-----------+ | | |
-| | | | : | | |
-| | ROM | | : | | |
-| |services| | : | | |
-| | | | +-------------+ | | |
-| | | | | *R5 ROM* | | | |
-| | | | +-------------+ | | |
-| | |<---------|---|Load and auth| | | |
-| | | | | tiboot3.bin | | | |
-| | | | +-------------+ | | |
-| | | | : | | |
-| | | | : | | |
-| | | | : | | |
-| | | | +-------------+ | | |
-| | | | | *R5 SPL* | | | |
-| | | | +-------------+ | | |
-| | | | | Load | | | |
-| | | | | sysfw.itb | | | |
-| | Start | | +-------------+ | | |
-| | System |<---------|---| Start | | | |
-| |Firmware| | | SYSFW | | | |
-| +--------+ | +-------------+ | | |
-| : | | | | | |
-| +---------+ | | Load | | | |
-| | *SYSFW* | | | system | | | |
-| +---------+ | | Config data | | | |
-| | |<--------|---| | | | |
-| | | | +-------------+ | | |
-| | | | | DDR | | | |
-| | | | | config | | | |
-| | | | +-------------+ | | |
-| | | | | Load | | | |
-| | | | | tispl.bin | | | |
-| | | | +-------------+ | | |
-| | | | | Load R5 | | | |
-| | | | | firmware | | | |
-| | | | +-------------+ | | |
-| | |<--------|---| Start A72 | | | |
-| | | | | and jump to | | | |
-| | | | | DM fw image | | | |
-| | | | +-------------+ | | |
-| | | | | +-----------+ | |
-| | |---------|-----------------------|---->| Reset rls | | |
-| | | | | +-----------+ | |
-| | TIFS | | | : | |
-| |Services | | | +-----------+ | |
-| | |<--------|-----------------------|---->|*ATF/OPTEE*| | |
-| | | | | +-----------+ | |
-| | | | | : | |
-| | | | | +-----------+ | |
-| | |<--------|-----------------------|---->| *A72 SPL* | | |
-| | | | | +-----------+ | |
-| | | | | | Load | | |
-| | | | | | u-boot.img| | |
-| | | | | +-----------+ | |
-| | | | | : | |
-| | | | | +-----------+ | |
-| | |<--------|-----------------------|---->| *U-Boot* | | |
-| | | | | +-----------+ | |
-| | | | | | prompt | | |
-| | | | | +-----------+ | |
-| | | | | | Load R5 | | |
-| | | | | | Firmware | | |
-| | | | | +-----------+ | |
-| | |<--------|-----------------------|-----| Start R5 | | +-----------+ |
-| | |---------|-----------------------|-----+-----------+-----|----->| R5 starts | |
-| | | | | | Load C6 | | +-----------+ |
-| | | | | | Firmware | | |
-| | | | | +-----------+ | |
-| | |<--------|-----------------------|-----| Start C6 | | +-----------+ |
-| | |---------|-----------------------|-----+-----------+-----|----->| C6 starts | |
-| | | | | | Load C7 | | +-----------+ |
-| | | | | | Firmware | | |
-| | | | | +-----------+ | |
-| | |<--------|-----------------------|-----| Start C7 | | +-----------+ |
-| | |---------|-----------------------|-----+-----------+-----|----->| C7 starts | |
-| +---------+ | | | +-----------+ |
-| | | | |
-+------------------------------------------------------------------------+-----------------------+
-
-- Here DMSC acts as master and provides all the critical services. R5/A72
-requests DMSC to get these services done as shown in the above diagram.
-
-Sources:
---------
-1. SYSFW:
- Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git
- Branch: master
-
-2. ATF:
- Tree: https://github.com/ARM-software/arm-trusted-firmware.git
- Branch: master
-
-3. OPTEE:
- Tree: https://github.com/OP-TEE/optee_os.git
- Branch: master
-
-4. U-Boot:
- Tree: https://source.denx.de/u-boot/u-boot
- Branch: master
-
-Build procedure:
-----------------
-1. SYSFW:
-$ make CROSS_COMPILE=arm-linux-gnueabihf-
-
-2. ATF:
-$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
-
-3. OPTEE:
-$ make PLATFORM=k3-j721e CFG_ARM64_core=y
-
-4. U-Boot:
-
-4.1. R5:
-$ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5
-$ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
-
-4.2. A72:
-$ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72
-$ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
-
-Target Images
---------------
-Copy the below images to an SD card and boot:
-- sysfw.itb from step 1
-- tiboot3.bin from step 4.1
-- tispl.bin, u-boot.img from 4.2
-
-Image formats:
---------------
-
-- tiboot3.bin:
- +-----------------------+
- | X.509 |
- | Certificate |
- | +-------------------+ |
- | | | |
- | | R5 | |
- | | u-boot-spl.bin | |
- | | | |
- | +-------------------+ |
- | | | |
- | | FIT header | |
- | | +---------------+ | |
- | | | | | |
- | | | DTB 1...N | | |
- | | +---------------+ | |
- | +-------------------+ |
- +-----------------------+
-
-- tispl.bin
- +-----------------------+
- | |
- | FIT HEADER |
- | +-------------------+ |
- | | | |
- | | A72 ATF | |
- | +-------------------+ |
- | | | |
- | | A72 OPTEE | |
- | +-------------------+ |
- | | | |
- | | R5 DM FW | |
- | +-------------------+ |
- | | | |
- | | A72 SPL | |
- | +-------------------+ |
- | | | |
- | | SPL DTB 1...N | |
- | +-------------------+ |
- +-----------------------+
-
-- sysfw.itb
- +-----------------------+
- | |
- | FIT HEADER |
- | +-------------------+ |
- | | | |
- | | sysfw.bin | |
- | +-------------------+ |
- | | | |
- | | board config | |
- | +-------------------+ |
- | | | |
- | | PM config | |
- | +-------------------+ |
- | | | |
- | | RM config | |
- | +-------------------+ |
- | | | |
- | | Secure config | |
- | +-------------------+ |
- +-----------------------+
-
-OSPI:
------
-ROM supports booting from OSPI from offset 0x0.
-
-Flashing images to OSPI:
-
-Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
-and sysfw.itb over tftp and then flash those to OSPI at their respective
-addresses.
-
-=> sf probe
-=> tftp ${loadaddr} tiboot3.bin
-=> sf update $loadaddr 0x0 $filesize
-=> tftp ${loadaddr} tispl.bin
-=> sf update $loadaddr 0x80000 $filesize
-=> tftp ${loadaddr} u-boot.img
-=> sf update $loadaddr 0x280000 $filesize
-=> tftp ${loadaddr} sysfw.itb
-=> sf update $loadaddr 0x6C0000 $filesize
-
-Flash layout for OSPI:
-
- 0x0 +----------------------------+
- | ospi.tiboot3(512K) |
- | |
- 0x80000 +----------------------------+
- | ospi.tispl(2M) |
- | |
- 0x280000 +----------------------------+
- | ospi.u-boot(4M) |
- | |
- 0x680000 +----------------------------+
- | ospi.env(128K) |
- | |
- 0x6A0000 +----------------------------+
- | ospi.env.backup (128K) |
- | |
- 0x6C0000 +----------------------------+
- | ospi.sysfw(1M) |
- | |
- 0x7C0000 +----------------------------+
- | padding (256k) |
- 0x800000 +----------------------------+
- | ospi.rootfs(UBIFS) |
- | |
- +----------------------------+
diff --git a/doc/board/index.rst b/doc/board/index.rst
index a6b3952..9e90978 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -27,6 +27,7 @@
socionext/index
st/index
tbs/index
+ ti/index
toradex/index
xen/index
xilinx/index
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
new file mode 100644
index 0000000..8b46070
--- /dev/null
+++ b/doc/board/ti/j721e_evm.rst
@@ -0,0 +1,316 @@
+.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+.. sectionauthor:: Lokesh Vutla <lokeshvutla@ti.com>
+
+Texas Instruments K3 Platforms
+==============================
+
+Introduction:
+-------------
+The J721e family of SoCs are part of K3 Multicore SoC architecture platform
+targeting automotive applications. They are designed as a low power, high
+performance and highly integrated device architecture, adding significant
+enhancement on processing power, graphics capability, video and imaging
+processing, virtualization and coherent memory support.
+
+The device is partitioned into three functional domains, each containing
+specific processing cores and peripherals:
+
+1. Wake-up (WKUP) domain:
+ * Device Management and Security Controller (DMSC)
+
+2. Microcontroller (MCU) domain:
+ * Dual Core ARM Cortex-R5F processor
+
+3. MAIN domain:
+ * Dual core 64-bit ARM Cortex-A72
+ * 2 x Dual cortex ARM Cortex-R5 subsystem
+ * 2 x C66x Digital signal processor sub system
+ * C71x Digital signal processor sub-system with MMA.
+
+More info can be found in TRM: http://www.ti.com/lit/pdf/spruil1
+
+Boot Flow:
+----------
+Boot flow is similar to that of AM65x SoC and extending it with remoteproc
+support. Below is the pictorial representation of boot flow:
+
+.. code-block:: text
+
+ +------------------------------------------------------------------------+-----------------------+
+ | DMSC | MCU R5 | A72 | MAIN R5/C66x/C7x |
+ +------------------------------------------------------------------------+-----------------------+
+ | +--------+ | | | |
+ | | Reset | | | | |
+ | +--------+ | | | |
+ | : | | | |
+ | +--------+ | +-----------+ | | |
+ | | *ROM* |----------|-->| Reset rls | | | |
+ | +--------+ | +-----------+ | | |
+ | | | | : | | |
+ | | ROM | | : | | |
+ | |services| | : | | |
+ | | | | +-------------+ | | |
+ | | | | | *R5 ROM* | | | |
+ | | | | +-------------+ | | |
+ | | |<---------|---|Load and auth| | | |
+ | | | | | tiboot3.bin | | | |
+ | | | | +-------------+ | | |
+ | | | | : | | |
+ | | | | : | | |
+ | | | | : | | |
+ | | | | +-------------+ | | |
+ | | | | | *R5 SPL* | | | |
+ | | | | +-------------+ | | |
+ | | | | | Load | | | |
+ | | | | | sysfw.itb | | | |
+ | | Start | | +-------------+ | | |
+ | | System |<---------|---| Start | | | |
+ | |Firmware| | | SYSFW | | | |
+ | +--------+ | +-------------+ | | |
+ | : | | | | | |
+ | +---------+ | | Load | | | |
+ | | *SYSFW* | | | system | | | |
+ | +---------+ | | Config data | | | |
+ | | |<--------|---| | | | |
+ | | | | +-------------+ | | |
+ | | | | | DDR | | | |
+ | | | | | config | | | |
+ | | | | +-------------+ | | |
+ | | | | | Load | | | |
+ | | | | | tispl.bin | | | |
+ | | | | +-------------+ | | |
+ | | | | | Load R5 | | | |
+ | | | | | firmware | | | |
+ | | | | +-------------+ | | |
+ | | |<--------|---| Start A72 | | | |
+ | | | | | and jump to | | | |
+ | | | | | DM fw image | | | |
+ | | | | +-------------+ | | |
+ | | | | | +-----------+ | |
+ | | |---------|-----------------------|---->| Reset rls | | |
+ | | | | | +-----------+ | |
+ | | TIFS | | | : | |
+ | |Services | | | +-----------+ | |
+ | | |<--------|-----------------------|---->|*ATF/OPTEE*| | |
+ | | | | | +-----------+ | |
+ | | | | | : | |
+ | | | | | +-----------+ | |
+ | | |<--------|-----------------------|---->| *A72 SPL* | | |
+ | | | | | +-----------+ | |
+ | | | | | | Load | | |
+ | | | | | | u-boot.img| | |
+ | | | | | +-----------+ | |
+ | | | | | : | |
+ | | | | | +-----------+ | |
+ | | |<--------|-----------------------|---->| *U-Boot* | | |
+ | | | | | +-----------+ | |
+ | | | | | | prompt | | |
+ | | | | | +-----------+ | |
+ | | | | | | Load R5 | | |
+ | | | | | | Firmware | | |
+ | | | | | +-----------+ | |
+ | | |<--------|-----------------------|-----| Start R5 | | +-----------+ |
+ | | |---------|-----------------------|-----+-----------+-----|----->| R5 starts | |
+ | | | | | | Load C6 | | +-----------+ |
+ | | | | | | Firmware | | |
+ | | | | | +-----------+ | |
+ | | |<--------|-----------------------|-----| Start C6 | | +-----------+ |
+ | | |---------|-----------------------|-----+-----------+-----|----->| C6 starts | |
+ | | | | | | Load C7 | | +-----------+ |
+ | | | | | | Firmware | | |
+ | | | | | +-----------+ | |
+ | | |<--------|-----------------------|-----| Start C7 | | +-----------+ |
+ | | |---------|-----------------------|-----+-----------+-----|----->| C7 starts | |
+ | +---------+ | | | +-----------+ |
+ | | | | |
+ +------------------------------------------------------------------------+-----------------------+
+
+- Here DMSC acts as master and provides all the critical services. R5/A72
+ requests DMSC to get these services done as shown in the above diagram.
+
+Sources:
+--------
+1. SYSFW:
+ Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git
+ Branch: master
+
+2. ATF:
+ Tree: https://github.com/ARM-software/arm-trusted-firmware.git
+ Branch: master
+
+3. OPTEE:
+ Tree: https://github.com/OP-TEE/optee_os.git
+ Branch: master
+
+4. U-Boot:
+ Tree: https://source.denx.de/u-boot/u-boot
+ Branch: master
+
+Build procedure:
+----------------
+1. SYSFW:
+
+.. code-block:: text
+
+ $ make CROSS_COMPILE=arm-linux-gnueabihf-
+
+2. ATF:
+
+.. code-block:: text
+
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
+
+3. OPTEE:
+
+.. code-block:: text
+
+ $ make PLATFORM=k3-j721e CFG_ARM64_core=y
+
+4. U-Boot:
+
+* 4.1 R5:
+
+.. code-block:: text
+
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+
+* 4.2 A72:
+
+.. code-block:: text
+
+ $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
+
+Target Images
+--------------
+Copy the below images to an SD card and boot:
+ - sysfw.itb from step 1
+ - tiboot3.bin from step 4.1
+ - tispl.bin, u-boot.img from 4.2
+
+Image formats:
+--------------
+
+- tiboot3.bin:
+
+.. code-block:: text
+
+ +-----------------------+
+ | X.509 |
+ | Certificate |
+ | +-------------------+ |
+ | | | |
+ | | R5 | |
+ | | u-boot-spl.bin | |
+ | | | |
+ | +-------------------+ |
+ | | | |
+ | | FIT header | |
+ | | +---------------+ | |
+ | | | | | |
+ | | | DTB 1...N | | |
+ | | +---------------+ | |
+ | +-------------------+ |
+ +-----------------------+
+
+- tispl.bin
+
+.. code-block:: text
+
+ +-----------------------+
+ | |
+ | FIT HEADER |
+ | +-------------------+ |
+ | | | |
+ | | A72 ATF | |
+ | +-------------------+ |
+ | | | |
+ | | A72 OPTEE | |
+ | +-------------------+ |
+ | | | |
+ | | R5 DM FW | |
+ | +-------------------+ |
+ | | | |
+ | | A72 SPL | |
+ | +-------------------+ |
+ | | | |
+ | | SPL DTB 1...N | |
+ | +-------------------+ |
+ +-----------------------+
+
+- sysfw.itb
+
+.. code-block:: text
+
+ +-----------------------+
+ | |
+ | FIT HEADER |
+ | +-------------------+ |
+ | | | |
+ | | sysfw.bin | |
+ | +-------------------+ |
+ | | | |
+ | | board config | |
+ | +-------------------+ |
+ | | | |
+ | | PM config | |
+ | +-------------------+ |
+ | | | |
+ | | RM config | |
+ | +-------------------+ |
+ | | | |
+ | | Secure config | |
+ | +-------------------+ |
+ +-----------------------+
+
+OSPI:
+-----
+ROM supports booting from OSPI from offset 0x0.
+
+Flashing images to OSPI:
+
+Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
+and sysfw.itb over tftp and then flash those to OSPI at their respective
+addresses.
+
+.. code-block:: text
+
+ => sf probe
+ => tftp ${loadaddr} tiboot3.bin
+ => sf update $loadaddr 0x0 $filesize
+ => tftp ${loadaddr} tispl.bin
+ => sf update $loadaddr 0x80000 $filesize
+ => tftp ${loadaddr} u-boot.img
+ => sf update $loadaddr 0x280000 $filesize
+ => tftp ${loadaddr} sysfw.itb
+ => sf update $loadaddr 0x6C0000 $filesize
+
+Flash layout for OSPI:
+
+.. code-block:: text
+
+ 0x0 +----------------------------+
+ | ospi.tiboot3(512K) |
+ | |
+ 0x80000 +----------------------------+
+ | ospi.tispl(2M) |
+ | |
+ 0x280000 +----------------------------+
+ | ospi.u-boot(4M) |
+ | |
+ 0x680000 +----------------------------+
+ | ospi.env(128K) |
+ | |
+ 0x6A0000 +----------------------------+
+ | ospi.env.backup (128K) |
+ | |
+ 0x6C0000 +----------------------------+
+ | ospi.sysfw(1M) |
+ | |
+ 0x7C0000 +----------------------------+
+ | padding (256k) |
+ 0x800000 +----------------------------+
+ | ospi.rootfs(UBIFS) |
+ | |
+ +----------------------------+