Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index 619d9b7..3136e3f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -497,9 +497,7 @@
rev x0, x0 /* BE to LE conversion */
cpu_is_le:
ldr x5, [x11, #24]
- ldr x6, =IH_ARCH_DEFAULT
- cmp x6, x5
- b.eq 1f
+ cbz x5, 1f
#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
adr x4, secondary_switch_to_el1
@@ -541,9 +539,7 @@
ldr x4, [x11]
ldr x5, [x11, #24]
- ldr x6, =IH_ARCH_DEFAULT
- cmp x6, x5
- b.eq 2f
+ cbz x5, 2f
ldr x5, =ES_TO_AARCH32
bl switch_to_el1
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index 80fe1ad..ab61ac3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -29,9 +29,14 @@
u64 *table = get_spin_tbl_addr();
int i;
- for (i = 1; i < CONFIG_MAX_CPUS; i++)
- table[i * WORDS_PER_SPIN_TABLE_ENTRY +
- SPIN_TABLE_ELEM_OS_ARCH_IDX] = os_arch;
+ for (i = 1; i < CONFIG_MAX_CPUS; i++) {
+ if (os_arch == IH_ARCH_DEFAULT)
+ table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+ SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_SAME;
+ else
+ table[i * WORDS_PER_SPIN_TABLE_ENTRY +
+ SPIN_TABLE_ELEM_ARCH_COMP_IDX] = OS_ARCH_DIFF;
+ }
}
#ifdef CONFIG_FSL_LSCH3
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/mp.h b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
index fd3f851..88f40c0 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/mp.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/mp.h
@@ -13,7 +13,7 @@
* uint64_t entry_addr;
* uint64_t status;
* uint64_t lpid;
-* uint64_t os_arch;
+* uint64_t arch_comp;
* };
* we pad this struct to 64 bytes so each entry is in its own cacheline
* the actual spin table is an array of these structures
@@ -21,10 +21,16 @@
#define SPIN_TABLE_ELEM_ENTRY_ADDR_IDX 0
#define SPIN_TABLE_ELEM_STATUS_IDX 1
#define SPIN_TABLE_ELEM_LPID_IDX 2
-#define SPIN_TABLE_ELEM_OS_ARCH_IDX 3
+/* compare os arch and cpu arch */
+#define SPIN_TABLE_ELEM_ARCH_COMP_IDX 3
#define WORDS_PER_SPIN_TABLE_ENTRY 8 /* pad to 64 bytes */
#define SPIN_TABLE_ELEM_SIZE 64
+/* os arch is same as cpu arch */
+#define OS_ARCH_SAME 0
+/* os arch is different from cpu arch */
+#define OS_ARCH_DIFF 1
+
#define id_to_core(x) ((x & 3) | (x >> 6))
#ifndef __ASSEMBLY__
extern u64 __spin_table[];
@@ -43,7 +49,4 @@
u32 cpu_pos_mask(void);
#endif
-#define IH_ARCH_ARM 2 /* ARM */
-#define IH_ARCH_ARM64 22 /* ARM64 */
-
#endif /* _FSL_LAYERSCAPE_MP_H */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 497afe7..aeb1273 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -65,8 +65,8 @@
#define SVR_LS2084A 0x870910
#define SVR_LS2048A 0x870920
#define SVR_LS2044A 0x870930
-#define SVR_LS2081A 0x870919
-#define SVR_LS2041A 0x870915
+#define SVR_LS2081A 0x870918
+#define SVR_LS2041A 0x870914
#define SVR_DEV_LS2080A 0x8701
diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index 2cd4fba..dfe5d20 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -81,7 +81,13 @@
* bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script)
*/
setenv("bootdelay", "0");
+
+#ifdef CONFIG_ARM
+ setenv("secureboot", "y");
+#else
setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD);
+#endif
+
return 0;
}
#endif
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index cf99770..c8cb215 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -46,3 +46,4 @@
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index cdbf5a2..29d6ea1 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -45,3 +45,4 @@
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index d13652a..8689fa7 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -61,3 +61,4 @@
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index b87a6d3..8647365 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -57,3 +57,4 @@
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index 9ab9e25..b254f3b 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -64,3 +64,4 @@
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_FSL_DCU_FB=y
# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index ada88c7..c7077fc 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -40,3 +40,4 @@
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 03e7adf..a551867 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -38,3 +38,4 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 61c0d38..a96cc56 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -56,3 +56,4 @@
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index d129832..1b18179 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -53,3 +53,4 @@
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index a5cfd09..08637e2 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -22,6 +22,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 20e5737..94d0ea9 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -22,6 +22,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index fd45148..6fc5d6e 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -23,6 +23,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index da550fc..802c69c 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -28,6 +28,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index 3a3cff6..c47be08 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -23,6 +23,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index 6d4bd74..f93854a 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -28,6 +28,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index fd916a5..62a9b2e 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -28,6 +28,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 17e3be8..a315ac1 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -25,6 +25,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 13a73dc..6d40587 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -21,6 +21,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
@@ -36,3 +37,4 @@
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index a87c1b7..1dc74de 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -21,6 +21,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_FSL_CAAM=y
@@ -36,3 +37,4 @@
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 3256893..9fdc437 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -26,6 +26,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
@@ -44,3 +45,4 @@
CONFIG_DM_USB=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index a15b28d..16cb8f1 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -26,6 +26,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_DM=y
@@ -42,3 +43,4 @@
CONFIG_FSL_QSPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig
index da77d60..fe4bb27 100644
--- a/configs/ls2080ardb_defconfig
+++ b/configs/ls2080ardb_defconfig
@@ -40,3 +40,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig
index 3a02233..4addbaf 100644
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@@ -40,3 +40,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DISTRO_DEFAULTS=y
diff --git a/drivers/pci/pcie_layerscape.h b/drivers/pci/pcie_layerscape.h
index 308b073..782e3ab 100644
--- a/drivers/pci/pcie_layerscape.h
+++ b/drivers/pci/pcie_layerscape.h
@@ -118,8 +118,8 @@
#define SVR_LS2084A 0x870910
#define SVR_LS2048A 0x870920
#define SVR_LS2044A 0x870930
-#define SVR_LS2081A 0x870919
-#define SVR_LS2041A 0x870915
+#define SVR_LS2081A 0x870918
+#define SVR_LS2041A 0x870914
/* LS1021a PCIE space */
#define LS1021_PCIE_SPACE_OFFSET 0x4000000000ULL
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index e61c67b..1dfa89a 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -493,6 +493,8 @@
;
while (1) {
+ WATCHDOG_RESET();
+
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
@@ -530,6 +532,8 @@
i = 0;
while ((RX_BUFFER_SIZE >= len) && (len > 0)) {
+ WATCHDOG_RESET();
+
rbsr_reg = qspi_read32(priv->flags, ®s->rbsr);
if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[i]);
@@ -702,6 +706,8 @@
;
while (1) {
+ WATCHDOG_RESET();
+
reg = qspi_read32(priv->flags, ®s->rbsr);
if (reg & QSPI_RBSR_RDBFL_MASK) {
data = qspi_read32(priv->flags, ®s->rbdr[0]);
@@ -757,6 +763,8 @@
static u32 wr_sfaddr;
u32 txbuf;
+ WATCHDOG_RESET();
+
if (dout) {
if (flags & SPI_XFER_BEGIN) {
priv->cur_seqid = *(u8 *)dout;
diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c
index 4e642ae..823beb3 100644
--- a/drivers/usb/common/fsl-errata.c
+++ b/drivers/usb/common/fsl-errata.c
@@ -202,6 +202,10 @@
#ifdef CONFIG_ARM64
case SVR_LS2080A:
case SVR_LS2085A:
+ /* fallthrough */
+ case SVR_LS2088A:
+ /* fallthrough */
+ case SVR_LS2081A:
case SVR_LS1046A:
case SVR_LS1012A:
return IS_SVR_REV(svr, 1, 0);
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0aa6fdd..98e902e 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -354,7 +354,6 @@
#endif
#define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -366,19 +365,131 @@
#define CONFIG_FSL_DEVICE_DISABLE
+#include <config_distro_defaults.h>
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
#ifdef CONFIG_LPUART
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
- "fdt_high=0xffffffff\0"
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_size=0x2800000\0" \
+ BOOTENV \
+ "boot_scripts=ls1021atwr_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1021atwr_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm32.itb; " \
+ "bootm $load_addr#ls1021atwr\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
#endif
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run nor_bootcmd;"
+#endif
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0"
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 32f7162..443a665 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -259,29 +259,80 @@
"5m(kernel),1m(dtb),9m(file_system)"
#endif
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x80100000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x61100000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "console=ttyS0,115200\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0"
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
- "earlycon=uart8250,mmio,0x21c0500 " \
- MTDPARTS_DEFAULT
+ "console=ttyS0,115200\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1043ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls1043ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size && bootm $load_addr#$board\0"
+#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
- "e0000 f00000 && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
#else
-#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
- "$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run nor_bootcmd;"
#endif
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
+ "earlycon=uart8250,mmio,0x21c0500 " \
+ MTDPARTS_DEFAULT
#endif
/* Monitor Command Prompt */
@@ -292,8 +343,10 @@
#define CONFIG_SYS_LONGHELP
#ifndef SPL_NO_MISC
+#ifndef CONFIG_CMDLINE_EDITING
#define CONFIG_CMDLINE_EDITING 1
#endif
+#endif
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 1b91676..7d7da91 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -201,20 +201,72 @@
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
#ifndef SPL_NO_MISC
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "loadaddr=0x80100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "load_addr=0xa0000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "ramdisk_addr_r=0xa0000000\0" \
"kernel_start=0x1000000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyS0,115200\0" \
- MTDPARTS_DEFAULT "\0"
+ MTDPARTS_DEFAULT "\0" \
+ BOOTENV \
+ "boot_scripts=ls1046ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1046ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;" \
+ "\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls1046ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size && bootm $load_addr#$board\0"
+
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500 " \
@@ -228,10 +280,6 @@
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
#define CONFIG_SYS_LONGHELP
-#ifndef SPL_NO_MISC
-#define CONFIG_CMDLINE_EDITING 1
-#endif
-
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 53cdcf2..9dc74b4 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -144,7 +144,6 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
@@ -460,6 +459,7 @@
#define CONFIG_CMDLINE_TAG
+#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "sf probe && sf read $kernel_load " \
"e0000 f00000 && bootm $kernel_load"
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 10af410..3d3dfb1 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -219,7 +219,6 @@
#define CONFIG_USB_XHCI_FSL
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
#endif
@@ -239,10 +238,9 @@
#endif
#ifndef SPL_NO_MISC
-#define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \
- "$kernel_start $kernel_size;" \
- "bootm $kernel_load"
-
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+ "&& esbc_halt; run qspi_bootcmd;"
#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
"15m(u-boot),48m(kernel.itb);" \
"7e800000.flash:16m(nand_uboot)," \
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 6ce177e..6b943cd 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -235,7 +235,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024)
#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024)
#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET 0x200000
+#define CONFIG_ENV_OFFSET 0x300000
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x20000
#endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2a6aa8e..b86726f 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -356,97 +356,113 @@
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
+#ifdef CONFIG_QSPI_BOOT
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x20700000 && " \
+ "esbc_validate 0x20740000;" \
+ "fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#else
+#define MC_INIT_CMD \
+ "mcinitcmd=env exists secureboot && " \
+ "esbc_validate 0x580700000 && " \
+ "esbc_validate 0x580740000; " \
+ "fsl_mc start mc 0x580a00000 0x580e00000 \0"
+#endif
+
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"fdt_high=0xa0000000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
+ "fdt_addr=0x64f00000\0" \
+ "kernel_addr=0x65000000\0" \
+ "kernel_start=0x1000000\0" \
+ "kernelheader_start=0x800000\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ "fdtheader_addr_r=0x80100000\0" \
+ "kernelheader_addr_r=0x80200000\0" \
+ "kernelheader_addr=0x580800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "kernelheader_size=0x40000\0" \
+ "fdt_addr_r=0x90000000\0" \
+ "load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=esbc_validate 0x580700000;" \
- "esbc_validate 0x580740000;" \
- "fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
-#else
+ "console=ttyAMA0,38400n8\0" \
+ MC_INIT_CMD \
+ BOOTENV \
+ "boot_scripts=ls2088ardb_boot.scr\0" \
+ "boot_script_hdr=hdr_ls2088ardb_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "scan_dev_for_boot=" \
+ "echo Scanning ${devtype} " \
+ "${devnum}:${distro_bootpart}...; " \
+ "for prefix in ${boot_prefixes}; do " \
+ "run scan_dev_for_scripts; " \
+ "done;\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "installer=load mmc 0:2 $load_addr " \
+ "/flex_installer_arm64.itb; " \
+ "bootm $load_addr#ls2088ardb\0" \
+ "qspi_bootcmd=echo Trying load from qspi..;" \
+ "sf probe && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "nor_bootcmd=echo Trying load from nor..;" \
+ "cp.b $kernel_addr $load_addr " \
+ "$kernel_size ; env exists secureboot && " \
+ "cp.b $kernelheader_addr $kernelheader_addr_r " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ "bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_QSPI_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x21000000\0" \
- "mcmemsize=0x40000000\0" \
- "mcinitcmd=fsl_mc start mc 0x20a00000" \
- " 0x20e00000 \0" \
- BOOTENV
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x20780000; " \
+ "env exists mcinitcmd && " \
+ "fsl_mc lazyapply dpl 0x20d00000; " \
+ "run distro_bootcmd;run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "scriptaddr=0x80800000\0" \
- "kernel_addr_r=0x81000000\0" \
- "pxefile_addr_r=0x81000000\0" \
- "fdt_addr_r=0x88000000\0" \
- "ramdisk_addr_r=0x89000000\0" \
- "loadaddr=0x80100000\0" \
- "kernel_addr=0x100000\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xa0000000\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "kernel_start=0x581000000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "mcmemsize=0x40000000\0" \
- "fdtfile=fsl-ls2080a-rdb.dtb\0" \
- "mcinitcmd=fsl_mc start mc 0x580a00000" \
- " 0x580e00000 \0" \
- BOOTENV
-#endif
+/* Try to boot an on-NOR kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND \
+ "env exists mcinitcmd && env exists secureboot "\
+ "&& esbc_validate 0x580780000; env exists mcinitcmd "\
+ "&& fsl_mc lazyapply dpl 0x580d00000;" \
+ "run distro_bootcmd;run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt; "
#endif
-
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600 " \
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_QSPI_BOOT
-/* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
- " && bootm $kernel_start" \
- " || run distro_bootcmd"
-#else
-/* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
- " && cp.b $kernel_start $kernel_load $kernel_size" \
- " && bootm $kernel_load" \
- " || run distro_bootcmd"
-#endif
-
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_PHYLIB_10G