diff --git a/board/data_modul/common/common.c b/board/data_modul/common/common.c
new file mode 100644
index 0000000..bf9a114
--- /dev/null
+++ b/board/data_modul/common/common.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+#include <common.h>
+#include <asm-generic/gpio.h>
+#include <asm-generic/sections.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <common.h>
+#include <dm/uclass.h>
+#include <hang.h>
+#include <i2c_eeprom.h>
+#include <image.h>
+#include <init.h>
+#include <net.h>
+#include <spl.h>
+
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
+
+u8 dmo_get_memcfg(void)
+{
+	struct gpio_desc gpio[4];
+	u8 memcfg = 0;
+	ofnode node;
+	int i, ret;
+
+	node = ofnode_path("/config");
+	if (!ofnode_valid(node)) {
+		printf("%s: no /config node?\n", __func__);
+		return BIT(2) | BIT(0);
+	}
+
+	ret = gpio_request_list_by_name_nodev(node,
+					      "dmo,ram-coding-gpios",
+					      gpio, ARRAY_SIZE(gpio),
+					      GPIOD_IS_IN);
+	for (i = 0; i < ret; i++)
+		memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i;
+
+	gpio_free_list_nodev(gpio, ret);
+
+	return memcfg;
+}
+
+int board_phys_sdram_size(phys_size_t *size)
+{
+	u8 memcfg = dmo_get_memcfg();
+
+	*size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G;
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void data_modul_imx_edm_sbc_early_init_f(const iomux_v3_cfg_t wdog_pad)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_pad(wdog_pad | MUX_PAD_CTRL(WDOG_PAD_CTRL));
+
+	set_wdog_reset(wdog);
+}
+
+__weak int data_modul_imx_edm_sbc_board_power_init(void)
+{
+	return 0;
+}
+
+static void spl_dram_init(struct dram_timing_info *dram_timing_info[8])
+{
+	u8 memcfg = dmo_get_memcfg();
+	int i;
+
+	printf("DDR:   %d GiB x%d [0x%x]\n",
+	       /* 0..4 GiB, 1..2 GiB, 0..1 GiB */
+	       4 >> ((memcfg >> 1) & 0x3),
+	       /* 0..x32, 1..x16 */
+	       32 >> (memcfg & BIT(0)),
+	       memcfg);
+
+	if (!dram_timing_info[memcfg]) {
+		printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n",
+		       memcfg);
+		for (i = 7; i >= 0; i--)
+			if (dram_timing_info[i])	/* Configuration found */
+				break;
+	}
+
+	ddr_init(dram_timing_info[memcfg]);
+}
+
+void dmo_board_init_f(const iomux_v3_cfg_t wdog_pad,
+		      struct dram_timing_info *dram_timing_info[8])
+{
+	struct udevice *dev;
+	int ret;
+
+	icache_enable();
+
+	arch_cpu_init();
+
+	init_uart_clk(2);
+
+	data_modul_imx_edm_sbc_early_init_f(wdog_pad);
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	ret = spl_early_init();
+	if (ret) {
+		debug("spl_early_init() failed: %d\n", ret);
+		hang();
+	}
+
+	preloader_console_init();
+
+	ret = uclass_get_device_by_name(UCLASS_CLK,
+					"clock-controller@30380000",
+					&dev);
+	if (ret < 0) {
+		printf("Failed to find clock node. Check device tree\n");
+		hang();
+	}
+
+	enable_tzc380();
+
+	data_modul_imx_edm_sbc_board_power_init();
+
+	/* DDR initialization */
+	spl_dram_init(dram_timing_info);
+
+	board_init_r(NULL, 0);
+}
+#else
+void dmo_setup_boot_device(void)
+{
+	int boot_device = get_boot_device();
+	char *devnum;
+
+	devnum = env_get("devnum");
+	if (devnum)	/* devnum is already set */
+		return;
+
+	if (boot_device == MMC3_BOOT)	/* eMMC */
+		env_set_ulong("devnum", 0);
+	else
+		env_set_ulong("devnum", 1);
+}
+
+void dmo_setup_mac_address(void)
+{
+	unsigned char enetaddr[6];
+	struct udevice *dev;
+	int off, ret;
+
+	ret = eth_env_get_enetaddr("ethaddr", enetaddr);
+	if (ret)	/* ethaddr is already set */
+		return;
+
+	off = fdt_path_offset(gd->fdt_blob, "eeprom0");
+	if (off < 0) {
+		printf("%s: No eeprom0 path offset\n", __func__);
+		return;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
+	if (ret) {
+		printf("Cannot find EEPROM!\n");
+		return;
+	}
+
+	ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6);
+	if (ret) {
+		printf("Error reading configuration EEPROM!\n");
+		return;
+	}
+
+	if (is_valid_ethaddr(enetaddr))
+		eth_env_set_enetaddr("ethaddr", enetaddr);
+}
+#endif