sf: Adopt flash table INFO macro from Linux
INFO macro make flash table entries more adjustable like
adding new flash_info attributes, update ID length bytes
and so on and more over it will sync to Linux way of defining
flash_info attributes.
- Add JEDEC_ID
- Add JEDEC_EXT macro
- Add JEDEC_MFR
- spi_flash_params => spi_flash_info
- params => info
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@openedev.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c
index f59134f..d68ee4a 100644
--- a/drivers/mtd/spi/sandbox.c
+++ b/drivers/mtd/spi/sandbox.c
@@ -88,7 +88,7 @@
/* The current flash status (see STAT_XXX defines above) */
u16 status;
/* Data describing the flash we're emulating */
- const struct spi_flash_params *data;
+ const struct spi_flash_info *data;
/* The file on disk to serv up data from */
int fd;
};
@@ -112,7 +112,7 @@
struct sandbox_spi_flash *sbsf = dev_get_priv(dev);
const char *file;
size_t len, idname_len;
- const struct spi_flash_params *data;
+ const struct spi_flash_info *data;
struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev);
struct sandbox_state *state = state_get_current();
struct udevice *bus = dev->parent;
@@ -168,7 +168,7 @@
}
debug("%s: device='%s'\n", __func__, spec);
- for (data = spi_flash_params_table; data->name; data++) {
+ for (data = spi_flash_ids; data->name; data++) {
len = strlen(data->name);
if (idname_len != len)
continue;
@@ -359,7 +359,9 @@
debug(" id: off:%u tx:", sbsf->off);
if (sbsf->off < IDCODE_LEN) {
/* Extract correct byte from ID 0x00aabbcc */
- id = sbsf->data->jedec >>
+ id = ((((sbsf->data)->id[0]) << 16) |
+ (((sbsf->data)->id[1]) << 8 |
+ ((sbsf->data)->id[2]))) >>
(8 * (IDCODE_LEN - 1 - sbsf->off));
} else {
id = 0;
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index cde4cfb..a9455ac 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -103,24 +103,36 @@
#define CMD_SPANSION_RDAR 0x65 /* Read any device register */
#define CMD_SPANSION_WRAR 0x71 /* Write any device register */
#endif
+
+#define JEDEC_MFR(info) ((info)->id[0])
+#define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2]))
+#define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
+
/**
- * struct spi_flash_params - SPI/QSPI flash device params structure
+ * struct spi_flash_info - SPI/QSPI flash device params structure
*
* @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
- * @ext_jedec: Device ext_jedec ID
* @sector_size: Isn't necessarily a sector size from vendor,
* the size listed here is what works with CMD_ERASE_64K
* @nr_sectors: No.of sectors on this device
* @flags: Important param, for flash specific behaviour
*/
-struct spi_flash_params {
+struct spi_flash_info {
const char *name;
- u32 jedec;
- u16 ext_jedec;
+
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[5];
+ u8 id_len;
+
u32 sector_size;
u32 nr_sectors;
+ u16 page_size;
+
u16 flags;
#define SECT_4K BIT(0)
#define E_FSR BIT(1)
@@ -133,7 +145,7 @@
#define RD_FULL (RD_QUAD | RD_DUAL | RD_QUADIO | RD_DUALIO)
};
-extern const struct spi_flash_params spi_flash_params_table[];
+extern const struct spi_flash_info spi_flash_ids[];
/* Send a single-byte command to the device and read the response */
int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len);
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index 5b50114..7fcc3bc 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -12,125 +12,140 @@
#include "sf_internal.h"
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
+ .sector_size = (_sector_size), \
+ .nr_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags),
+
/* SPI/QSPI flash device params structure */
-const struct spi_flash_params spi_flash_params_table[] = {
+const struct spi_flash_info spi_flash_ids[] = {
#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, SECT_4K},
- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, SECT_4K},
- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, SECT_4K},
- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, SECT_4K},
- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, SECT_4K},
- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, SECT_4K},
- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, SECT_4K},
- {"AT25DF321A", 0x1f4701, 0x0, 64 * 1024, 64, SECT_4K},
- {"AT25DF321", 0x1f4700, 0x0, 64 * 1024, 64, SECT_4K},
- {"AT26DF081A", 0x1f4501, 0x0, 64 * 1024, 16, SECT_4K},
+ {"AT45DB011D", INFO(0x1f2200, 0x0, 64 * 1024, 4, SECT_4K) },
+ {"AT45DB021D", INFO(0x1f2300, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"AT45DB041D", INFO(0x1f2400, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"AT45DB081D", INFO(0x1f2500, 0x0, 64 * 1024, 16, SECT_4K) },
+ {"AT45DB161D", INFO(0x1f2600, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"AT45DB321D", INFO(0x1f2700, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"AT45DB641D", INFO(0x1f2800, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"AT25DF321A", INFO(0x1f4701, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"AT25DF321", INFO(0x1f4700, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"AT26DF081A", INFO(0x1f4501, 0x0, 64 * 1024, 16, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_EON /* EON */
- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0},
- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K},
- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0},
- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0},
+ {"EN25Q32B", INFO(0x1c3016, 0x0, 64 * 1024, 64, 0) },
+ {"EN25Q64", INFO(0x1c3017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"EN25Q128B", INFO(0x1c3018, 0x0, 64 * 1024, 256, 0) },
+ {"EN25S64", INFO(0x1c3817, 0x0, 64 * 1024, 128, 0) },
#endif
#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K},
- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K},
+ {"GD25Q64B", INFO(0xc84017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"GD25LQ32", INFO(0xc86016, 0x0, 64 * 1024, 64, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_ISSI /* ISSI */
- {"IS25LP032", 0x9d6016, 0x0, 64 * 1024, 64, 0},
- {"IS25LP064", 0x9d6017, 0x0, 64 * 1024, 128, 0},
- {"IS25LP128", 0x9d6018, 0x0, 64 * 1024, 256, 0},
+ {"IS25LP032", INFO(0x9d6016, 0x0, 64 * 1024, 64, 0) },
+ {"IS25LP064", INFO(0x9d6017, 0x0, 64 * 1024, 128, 0) },
+ {"IS25LP128", INFO(0x9d6018, 0x0, 64 * 1024, 256, 0) },
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0},
- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0},
- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0},
- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0},
- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0},
- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0},
- {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP},
- {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP},
- {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP},
- {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP},
+ {"MX25L2006E", INFO(0xc22012, 0x0, 64 * 1024, 4, 0) },
+ {"MX25L4005", INFO(0xc22013, 0x0, 64 * 1024, 8, 0) },
+ {"MX25L8005", INFO(0xc22014, 0x0, 64 * 1024, 16, 0) },
+ {"MX25L1605D", INFO(0xc22015, 0x0, 64 * 1024, 32, 0) },
+ {"MX25L3205D", INFO(0xc22016, 0x0, 64 * 1024, 64, 0) },
+ {"MX25L6405D", INFO(0xc22017, 0x0, 64 * 1024, 128, 0) },
+ {"MX25L12805", INFO(0xc22018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) },
+ {"MX25L25635F", INFO(0xc22019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP) },
+ {"MX25L51235F", INFO(0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP) },
+ {"MX25L12855E", INFO(0xc22618, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) },
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0},
- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0},
- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0},
- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0},
- {"S25FL116K", 0x014015, 0x0, 64 * 1024, 128, 0},
- {"S25FL164K", 0x014017, 0x0140, 64 * 1024, 128, 0},
- {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL | WR_QPP},
- {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL | WR_QPP},
- {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL | WR_QPP},
- {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL | WR_QPP},
- {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64, RD_FULL | WR_QPP},
- {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL | WR_QPP},
- {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL | WR_QPP},
- {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL | WR_QPP},
- {"S25FS512S", 0x010220, 0x4D00, 128 * 1024, 512, RD_FULL | WR_QPP},
- {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL | WR_QPP},
- {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL | WR_QPP},
- {"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL | WR_QPP},
+ {"S25FL008A", INFO(0x010213, 0x0, 64 * 1024, 16, 0) },
+ {"S25FL016A", INFO(0x010214, 0x0, 64 * 1024, 32, 0) },
+ {"S25FL032A", INFO(0x010215, 0x0, 64 * 1024, 64, 0) },
+ {"S25FL064A", INFO(0x010216, 0x0, 64 * 1024, 128, 0) },
+ {"S25FL116K", INFO(0x014015, 0x0, 64 * 1024, 128, 0) },
+ {"S25FL164K", INFO(0x014017, 0x0140, 64 * 1024, 128, 0) },
+ {"S25FL128P_256K", INFO(0x012018, 0x0300, 256 * 1024, 64, RD_FULL | WR_QPP) },
+ {"S25FL128P_64K", INFO(0x012018, 0x0301, 64 * 1024, 256, RD_FULL | WR_QPP) },
+ {"S25FL032P", INFO(0x010215, 0x4d00, 64 * 1024, 64, RD_FULL | WR_QPP) },
+ {"S25FL064P", INFO(0x010216, 0x4d00, 64 * 1024, 128, RD_FULL | WR_QPP) },
+ {"S25FL128S_256K", INFO(0x012018, 0x4d00, 256 * 1024, 64, RD_FULL | WR_QPP) },
+ {"S25FL128S_64K", INFO(0x012018, 0x4d01, 64 * 1024, 256, RD_FULL | WR_QPP) },
+ {"S25FL256S_256K", INFO(0x010219, 0x4d00, 256 * 1024, 128, RD_FULL | WR_QPP) },
+ {"S25FL256S_64K", INFO(0x010219, 0x4d01, 64 * 1024, 512, RD_FULL | WR_QPP) },
+ {"S25FS512S", INFO(0x010220, 0x4D00, 128 * 1024, 512, RD_FULL | WR_QPP) },
+ {"S25FL512S_256K", INFO(0x010220, 0x4d00, 256 * 1024, 256, RD_FULL | WR_QPP) },
+ {"S25FL512S_64K", INFO(0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL | WR_QPP) },
+ {"S25FL512S_512K", INFO(0x010220, 0x4f00, 256 * 1024, 256, RD_FULL | WR_QPP) },
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0},
- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0},
- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0},
- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0},
- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0},
- {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0},
- {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_QUAD | RD_DUAL},
- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0},
- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0},
- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0},
- {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, SECT_4K},
- {"N25Q016A", 0x20bb15, 0x0, 64 * 1024, 32, SECT_4K},
- {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP},
- {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP},
- {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K},
- {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP | E_FSR | SECT_4K},
- {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP | E_FSR | SECT_4K},
- {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP | E_FSR | SECT_4K},
+ {"M25P10", INFO(0x202011, 0x0, 32 * 1024, 4, 0) },
+ {"M25P20", INFO(0x202012, 0x0, 64 * 1024, 4, 0) },
+ {"M25P40", INFO(0x202013, 0x0, 64 * 1024, 8, 0) },
+ {"M25P80", INFO(0x202014, 0x0, 64 * 1024, 16, 0) },
+ {"M25P16", INFO(0x202015, 0x0, 64 * 1024, 32, 0) },
+ {"M25PE16", INFO(0x208015, 0x1000, 64 * 1024, 32, 0) },
+ {"M25PX16", INFO(0x207115, 0x1000, 64 * 1024, 32, RD_QUAD | RD_DUAL) },
+ {"M25P32", INFO(0x202016, 0x0, 64 * 1024, 64, 0) },
+ {"M25P64", INFO(0x202017, 0x0, 64 * 1024, 128, 0) },
+ {"M25P128", INFO(0x202018, 0x0, 256 * 1024, 64, 0) },
+ {"M25PX64", INFO(0x207117, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"N25Q016A", INFO(0x20bb15, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"N25Q32", INFO(0x20ba16, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q32A", INFO(0x20bb16, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q64", INFO(0x20ba17, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q64A", INFO(0x20bb17, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q128", INFO(0x20ba18, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) },
+ {"N25Q128A", INFO(0x20bb18, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP) },
+ {"N25Q256", INFO(0x20ba19, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q256A", INFO(0x20bb19, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K) },
+ {"N25Q512", INFO(0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP | E_FSR | SECT_4K) },
+ {"N25Q512A", INFO(0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL | WR_QPP | E_FSR | SECT_4K) },
+ {"N25Q1024", INFO(0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP | E_FSR | SECT_4K) },
+ {"N25Q1024A", INFO(0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL | WR_QPP | E_FSR | SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_SST /* SST */
- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, SECT_4K | SST_WR},
- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, SECT_4K | SST_WR},
- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, SECT_4K | SST_WR},
- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, SECT_4K | SST_WR},
- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, SECT_4K},
- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, SECT_4K | SST_WR},
- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, SECT_4K | SST_WR},
- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, SECT_4K | SST_WR},
- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, SECT_4K | SST_WR},
- {"SST25WF040B", 0x621613, 0x0, 64 * 1024, 8, SECT_4K},
- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, SECT_4K | SST_WR},
+ {"SST25VF040B", INFO(0xbf258d, 0x0, 64 * 1024, 8, SECT_4K | SST_WR) },
+ {"SST25VF080B", INFO(0xbf258e, 0x0, 64 * 1024, 16, SECT_4K | SST_WR) },
+ {"SST25VF016B", INFO(0xbf2541, 0x0, 64 * 1024, 32, SECT_4K | SST_WR) },
+ {"SST25VF032B", INFO(0xbf254a, 0x0, 64 * 1024, 64, SECT_4K | SST_WR) },
+ {"SST25VF064C", INFO(0xbf254b, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"SST25WF512", INFO(0xbf2501, 0x0, 64 * 1024, 1, SECT_4K | SST_WR) },
+ {"SST25WF010", INFO(0xbf2502, 0x0, 64 * 1024, 2, SECT_4K | SST_WR) },
+ {"SST25WF020", INFO(0xbf2503, 0x0, 64 * 1024, 4, SECT_4K | SST_WR) },
+ {"SST25WF040", INFO(0xbf2504, 0x0, 64 * 1024, 8, SECT_4K | SST_WR) },
+ {"SST25WF040B", INFO(0x621613, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"SST25WF080", INFO(0xbf2505, 0x0, 64 * 1024, 16, SECT_4K | SST_WR) },
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0},
- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0},
- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0},
- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, SECT_4K},
- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, SECT_4K},
- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, SECT_4K},
- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, SECT_4K},
- {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K},
- {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K},
+ {"W25P80", INFO(0xef2014, 0x0, 64 * 1024, 16, 0) },
+ {"W25P16", INFO(0xef2015, 0x0, 64 * 1024, 32, 0) },
+ {"W25P32", INFO(0xef2016, 0x0, 64 * 1024, 64, 0) },
+ {"W25X40", INFO(0xef3013, 0x0, 64 * 1024, 8, SECT_4K) },
+ {"W25X16", INFO(0xef3015, 0x0, 64 * 1024, 32, SECT_4K) },
+ {"W25X32", INFO(0xef3016, 0x0, 64 * 1024, 64, SECT_4K) },
+ {"W25X64", INFO(0xef3017, 0x0, 64 * 1024, 128, SECT_4K) },
+ {"W25Q80BL", INFO(0xef4014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q16CL", INFO(0xef4015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q32BV", INFO(0xef4016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q64CV", INFO(0xef4017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q128BV", INFO(0xef4018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q256", INFO(0xef4019, 0x0, 64 * 1024, 512, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q80BW", INFO(0xef5014, 0x0, 64 * 1024, 16, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q16DW", INFO(0xef6015, 0x0, 64 * 1024, 32, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q32DW", INFO(0xef6016, 0x0, 64 * 1024, 64, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q64DW", INFO(0xef6017, 0x0, 64 * 1024, 128, RD_FULL | WR_QPP | SECT_4K) },
+ {"W25Q128FW", INFO(0xef6018, 0x0, 64 * 1024, 256, RD_FULL | WR_QPP | SECT_4K) },
#endif
{}, /* Empty entry to terminate the list */
/*
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 7f6e9ae..95ee5ac 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -165,7 +165,8 @@
return flash->bank_curr;
}
-static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
+static int spi_flash_read_bar(struct spi_flash *flash,
+ const struct spi_flash_info *info)
{
u8 curr_bank = 0;
int ret;
@@ -173,7 +174,7 @@
if (flash->size <= SPI_FLASH_16MB_BOUN)
goto bar_end;
- switch (idcode0) {
+ switch (JEDEC_MFR(info)) {
case SPI_FLASH_CFI_MFR_SPANSION:
flash->bank_read_cmd = CMD_BANKADDR_BRRD;
flash->bank_write_cmd = CMD_BANKADDR_BRWR;
@@ -924,9 +925,35 @@
}
#endif
-static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
+static const struct spi_flash_info *spi_flash_read_id(struct spi_flash *flash)
{
- switch (idcode0) {
+ int tmp;
+ u8 id[5];
+ const struct spi_flash_info *info;
+
+ tmp = spi_flash_cmd(flash->spi, CMD_READ_ID, id, 5);
+ if (tmp < 0) {
+ printf("SF: error %d reading JEDEC ID\n", tmp);
+ return ERR_PTR(tmp);
+ }
+
+ info = spi_flash_ids;
+ for (; info->name != NULL; info++) {
+ if (info->id_len) {
+ if (!memcmp(info->id, id, info->id_len))
+ return info;
+ }
+ }
+
+ printf("SF: unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
+ id[0], id[1], id[2]);
+ return ERR_PTR(-ENODEV);
+}
+
+static int set_quad_mode(struct spi_flash *flash,
+ const struct spi_flash_info *info)
+{
+ switch (JEDEC_MFR(info)) {
#ifdef CONFIG_SPI_FLASH_MACRONIX
case SPI_FLASH_CFI_MFR_MACRONIX:
return macronix_quad_enable(flash);
@@ -941,7 +968,8 @@
return micron_quad_enable(flash);
#endif
default:
- printf("SF: Need set QEB func for %02x flash\n", idcode0);
+ printf("SF: Need set QEB func for %02x flash\n",
+ JEDEC_MFR(info));
return -1;
}
}
@@ -1011,45 +1039,12 @@
int spi_flash_scan(struct spi_flash *flash)
{
struct spi_slave *spi = flash->spi;
- const struct spi_flash_params *params;
- u16 jedec, ext_jedec;
- u8 idcode[5];
- int ret;
-
- /* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
- if (ret) {
- printf("SF: Failed to get idcodes\n");
- return ret;
- }
-
-#ifdef DEBUG
- printf("SF: Got idcodes\n");
- print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
+ const struct spi_flash_info *info = NULL;
+ int ret = -1;
- jedec = idcode[1] << 8 | idcode[2];
- ext_jedec = idcode[3] << 8 | idcode[4];
-
- /* Validate params from spi_flash_params table */
- params = spi_flash_params_table;
- for (; params->name != NULL; params++) {
- if ((params->jedec >> 16) == idcode[0]) {
- if ((params->jedec & 0xFFFF) == jedec) {
- if (params->ext_jedec == 0)
- break;
- else if (params->ext_jedec == ext_jedec)
- break;
- }
- }
- }
-
- if (!params->name) {
- printf("SF: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- idcode[0], jedec, ext_jedec);
- return -EPROTONOSUPPORT;
- }
+ info = spi_flash_read_id(flash);
+ if (IS_ERR_OR_NULL(info))
+ return -ENOENT;
#ifdef CONFIG_SPI_FLASH_SPANSION
/*
@@ -1065,11 +1060,17 @@
* sector that is not overlaid by the parameter sectors.
* The uniform sector erase command has no effect on parameter sectors.
*/
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
- (ext_jedec & 0xff00) == 0x4d00) {
+ if ((JEDEC_ID(info) == 0x0219 || (JEDEC_ID(info) == 0x0220)) &&
+ (JEDEC_EXT(info) & 0xff00) == 0x4d00) {
int ret;
+ u8 idcode[5];
u8 id[6];
+ /* Read the ID codes again, 5 bytes */
+ ret = spi_flash_cmd(flash->spi, CMD_READ_ID, idcode, sizeof(idcode));
+ if (ret)
+ return -EIO;
+
/* Read the ID codes again, 6 bytes */
ret = spi_flash_cmd(flash->spi, CMD_READ_ID, id, sizeof(id));
if (ret)
@@ -1088,18 +1089,18 @@
}
#endif
/* Flash powers up read-only, so clear BP# bits */
- if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
- idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
- idcode[0] == SPI_FLASH_CFI_MFR_SST)
+ if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX ||
+ JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST)
write_sr(flash, 0);
/* Assign spi data */
- flash->name = params->name;
+ flash->name = info->name;
flash->memory_map = spi->memory_map;
flash->dual_flash = spi->option;
/* Assign spi flash flags */
- if (params->flags & SST_WR)
+ if (info->flags & SST_WR)
flash->flags |= SNOR_F_SST_WR;
/* Assign spi_flash ops */
@@ -1118,7 +1119,7 @@
#endif
/* lock hooks are flash specific - assign them based on idcode0 */
- switch (idcode[0]) {
+ switch (JEDEC_MFR(info)) {
#if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
case SPI_FLASH_CFI_MFR_STMICRO:
case SPI_FLASH_CFI_MFR_SST:
@@ -1128,28 +1129,26 @@
#endif
break;
default:
- debug("SF: Lock ops not supported for %02x flash\n", idcode[0]);
+ debug("SF: Lock ops not supported for %02x flash\n", JEDEC_MFR(info));
}
/* Compute the flash size */
flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
+ flash->page_size = info->page_size;
/*
* The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
* 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
* the 0x4d00 Extended JEDEC code have 512b pages. All of the others
* have 256b pages.
*/
- if (ext_jedec == 0x4d00) {
- if ((jedec == 0x0215) || (jedec == 0x216) || (jedec == 0x220))
- flash->page_size = 256;
- else
+ if (JEDEC_EXT(info) == 0x4d00) {
+ if ((JEDEC_ID(info) != 0x0215) &&
+ (JEDEC_ID(info) != 0x0216))
flash->page_size = 512;
- } else {
- flash->page_size = 256;
}
flash->page_size <<= flash->shift;
- flash->sector_size = params->sector_size << flash->shift;
- flash->size = flash->sector_size * params->nr_sectors << flash->shift;
+ flash->sector_size = info->sector_size << flash->shift;
+ flash->size = flash->sector_size * info->nr_sectors << flash->shift;
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
flash->size <<= 1;
@@ -1157,7 +1156,7 @@
#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS
/* Compute erase sector and command */
- if (params->flags & SECT_4K) {
+ if (info->flags & SECT_4K) {
flash->erase_cmd = CMD_ERASE_4K;
flash->erase_size = 4096 << flash->shift;
} else
@@ -1174,13 +1173,13 @@
flash->read_cmd = CMD_READ_ARRAY_FAST;
if (spi->mode & SPI_RX_SLOW)
flash->read_cmd = CMD_READ_ARRAY_SLOW;
- else if (spi->mode & SPI_RX_QUAD && params->flags & RD_QUAD)
+ else if (spi->mode & SPI_RX_QUAD && info->flags & RD_QUAD)
flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST;
- else if (spi->mode & SPI_RX_DUAL && params->flags & RD_DUAL)
+ else if (spi->mode & SPI_RX_DUAL && info->flags & RD_DUAL)
flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
/* Look for write commands */
- if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
+ if (info->flags & WR_QPP && spi->mode & SPI_TX_QUAD)
flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
else
/* Go for default supported write cmd */
@@ -1190,9 +1189,10 @@
if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
(flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
(flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
- ret = set_quad_mode(flash, idcode[0]);
+ ret = set_quad_mode(flash, info);
if (ret) {
- debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+ debug("SF: Fail to set QEB for %02x\n",
+ JEDEC_MFR(info));
return -EINVAL;
}
}
@@ -1217,13 +1217,13 @@
}
#ifdef CONFIG_SPI_FLASH_STMICRO
- if (params->flags & E_FSR)
+ if (info->flags & E_FSR)
flash->flags |= SNOR_F_USE_FSR;
#endif
/* Configure the BAR - discover bank cmds and read current bank */
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bar(flash, idcode[0]);
+ ret = spi_flash_read_bar(flash, info);
if (ret < 0)
return ret;
#endif
diff --git a/include/linux/err.h b/include/linux/err.h
index e4d22d5..22e5756 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -36,6 +36,11 @@
return IS_ERR_VALUE((unsigned long)ptr);
}
+static inline bool IS_ERR_OR_NULL(const void *ptr)
+{
+ return !ptr || IS_ERR_VALUE((unsigned long)ptr);
+}
+
/**
* ERR_CAST - Explicitly cast an error-valued pointer to another pointer type
* @ptr: The pointer to cast.