binman: Update various pieces of the documentation
A few sections are a little out of date now. Update them.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/doc/develop/package/entries.rst b/doc/develop/package/entries.rst
new file mode 120000
index 0000000..ecedceb
--- /dev/null
+++ b/doc/develop/package/entries.rst
@@ -0,0 +1 @@
+../../../tools/binman/entries.rst
\ No newline at end of file
diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst
index 1cdc9de..15314d1 100644
--- a/tools/binman/binman.rst
+++ b/tools/binman/binman.rst
@@ -9,39 +9,43 @@
grouped together and placed in MMC flash. When the system starts, it must be
able to find these pieces.
-So far U-Boot has not provided a way to handle creating such images in a
-general way. Each SoC does what it needs to build an image, often packing or
-concatenating images in the U-Boot build system.
+Building firmware should be separate from packaging it. Many of the complexities
+of modern firmware build systems come from trying to do both at once. With
+binman, you build all the pieces that are needed, using whatever assortment of
+projects and build systems are needed, then use binman to stitch everything
+together.
-Binman aims to provide a mechanism for building images, from simple
-SPL + U-Boot combinations, to more complex arrangements with many parts.
-
What it does
------------
Binman reads your board's device tree and finds a node which describes the
-required image layout. It uses this to work out what to place where. The
-output file normally contains the device tree, so it is in principle possible
-to read an image and extract its constituent parts.
+required image layout. It uses this to work out what to place where.
+
+Binman provides a mechanism for building images, from simple SPL + U-Boot
+combinations, to more complex arrangements with many parts. It also allows
+users to inspect images, extract and replace binaries within them, repacking if
+needed.
Features
--------
-So far binman is pretty simple. It supports binary blobs, such as 'u-boot',
-'spl' and 'fdt'. It supports empty entries (such as setting to 0xff). It can
-place entries at a fixed location in the image, or fit them together with
-suitable padding and alignment. It provides a way to process binaries before
-they are included, by adding a Python plug-in. The device tree is available
-to U-Boot at run-time so that the images can be interpreted.
+Apart from basic padding, alignment and positioning features, Binman supports
+hierarchical images, compression, hashing and dealing with the binary blobs
+which are a sad trend in open-source firmware at present.
-Binman can update the device tree with the final location of everything when it
-is done. Entry positions can be provided to U-Boot SPL as run-time symbols,
-avoiding device-tree code overhead.
+Executable binaries can access the location of other binaries in an image by
+using special linker symbols (zero-overhead but somewhat limited) or by reading
+the devicetree description of the image.
-Binman can also support incorporating filesystems in the image if required.
-For example x86 platforms may use CBFS in some cases.
+Binman is designed primarily for use with U-Boot and associated binaries such
+as ARM Trusted Firmware, but it is suitable for use with other projects, such
+as Zephyr. Binman also provides facilities useful in Chromium OS, such as CBFS,
+vblocks and and the like.
+
+Binman provides a way to process binaries before they are included, by adding a
+Python plug-in.
Binman is intended for use with U-Boot but is designed to be general enough
to be useful in other image-packaging situations.
@@ -50,11 +54,11 @@
Motivation
----------
-Packaging of firmware is quite a different task from building the various
-parts. In many cases the various binaries which go into the image come from
-separate build systems. For example, ARM Trusted Firmware is used on ARMv8
-devices but is not built in the U-Boot tree. If a Linux kernel is included
-in the firmware image, it is built elsewhere.
+As mentioned above, packaging of firmware is quite a different task from
+building the various parts. In many cases the various binaries which go into
+the image come from separate build systems. For example, ARM Trusted Firmware
+is used on ARMv8 devices but is not built in the U-Boot tree. If a Linux kernel
+is included in the firmware image, it is built elsewhere.
It is of course possible to add more and more build rules to the U-Boot
build system to cover these cases. It can shell out to other Makefiles and
@@ -215,17 +219,12 @@
Enabling binman for a board
---------------------------
-At present binman is invoked from a rule in the main Makefile. Typically you
-will have a rule like::
+At present binman is invoked from a rule in the main Makefile. You should be
+able to enable CONFIG_BINMAN to enable this rule.
- ifneq ($(CONFIG_ARCH_<something>),)
- u-boot-<your_suffix>.bin: <input_file_1> <input_file_2> checkbinman FORCE
- $(call if_changed,binman)
- endif
-
-This assumes that u-boot-<your_suffix>.bin is a target, and is the final file
-that you need to produce. You can make it a target by adding it to INPUTS-y
-either in the main Makefile or in a config.mk file in your arch subdirectory.
+The output file is typically named image.bin and is located in the output
+directory. If input files are needed to you add these to INPUTS-y either in the
+main Makefile or in a config.mk file in your arch subdirectory.
Once binman is executed it will pick up its instructions from a device-tree
file, typically <soc>-u-boot.dtsi, where <soc> is your CONFIG_SYS_SOC value.
@@ -786,13 +785,18 @@
Entry Documentation
--------------------
+===================
For details on the various entry types supported by binman and how to use them,
-see README.entries. This is generated from the source code using:
+see entries.rst which is generated from the source code using:
+
+ binman entry-docs >tools/binman/entries.rst
- binman entry-docs >tools/binman/README.entries
+.. toctree::
+ :maxdepth: 2
+ entries
+
Managing images
===============
@@ -1136,7 +1140,8 @@
Some ideas:
- Use of-platdata to make the information available to code that is unable
- to use device tree (such as a very small SPL image)
+ to use device tree (such as a very small SPL image). For now, limited info is
+ available via linker symbols
- Allow easy building of images by specifying just the board name
- Support building an image for a board (-b) more completely, with a
configurable build directory