arm: dts: sync the Rockhip 3328 SoCs from Linux
Sync the rk3328 DTs and associated bits from 5.14-rc1.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index 6abc6f4..ff6b466 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -10,6 +10,12 @@
model = "Rockchip RK3328 EVB";
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -41,7 +47,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -70,6 +76,18 @@
cpu-supply = <&vdd_arm>;
};
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
@@ -82,11 +100,10 @@
&gmac2phy {
phy-supply = <&vcc_phy>;
clock_in_out = "output";
- assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
assigned-clock-rate = <50000000>;
assigned-clocks = <&cru SCLK_MAC2PHY>;
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
-
+ status = "okay";
};
&i2c1 {
diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
index 9e2ced1..8db5e55 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -20,7 +20,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts b/arch/arm/dts/rk3328-nanopi-r2s.dts
index 5445c5c..3857d48 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s.dts
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -13,6 +13,11 @@
model = "FriendlyElec NanoPi R2S";
compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+ aliases {
+ ethernet1 = &rtl8153;
+ mmc0 = &sdmmc;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -50,6 +55,7 @@
sys_led: led-1 {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
label = "nanopi-r2s:red:sys";
+ default-state = "on";
};
wan_led: led-2 {
@@ -71,15 +77,15 @@
regulator-settling-time-us = <5000>;
regulator-type = "voltage";
startup-delay-us = <2000>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
vin-supply = <&vcc_io_33>;
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
regulator-boot-on;
@@ -96,6 +102,18 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ vdd_5v_lan: vdd-5v-lan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&lan_vdd_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vdd_5v_lan";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
};
&cpu0 {
@@ -114,6 +132,10 @@
cpu-supply = <&vdd_arm>;
};
+&display_subsystem {
+ status = "disabled";
+};
+
&gmac2io {
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
@@ -134,8 +156,6 @@
#size-cells = <0>;
rtl8211e: ethernet-phy@1 {
- compatible = "ethernet-phy-id001c.c915",
- "ethernet-phy-ieee802.3-c22";
reg = <1>;
pinctrl-0 = <ð_phy_reset_pin>;
pinctrl-names = "default";
@@ -282,7 +302,7 @@
};
};
- ethernet-phy {
+ gmac2io {
eth_phy_reset_pin: eth-phy-reset-pin {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
@@ -302,6 +322,12 @@
};
};
+ lan {
+ lan_vdd_pin: lan-vdd-pin {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -359,6 +385,19 @@
&usb20_otg {
status = "okay";
dr_mode = "host";
+};
+
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Second port is for USB 3.0 */
+ rtl8153: device@2 {
+ compatible = "usbbda,8153";
+ reg = <2>;
+ };
};
&usb_host0_ehci {
diff --git a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
index 08806df..20a6213 100644
--- a/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-roc-cc-u-boot.dtsi
@@ -40,7 +40,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-roc-cc.dts b/arch/arm/dts/rk3328-roc-cc.dts
index 8d553c9..aa22a0c 100644
--- a/arch/arm/dts/rk3328-roc-cc.dts
+++ b/arch/arm/dts/rk3328-roc-cc.dts
@@ -10,6 +10,11 @@
model = "Firefly roc-rk3328-cc";
compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -34,7 +39,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-boot-on;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
@@ -45,8 +50,8 @@
vcc_sdio: sdmmcio-regulator {
compatible = "regulator-gpio";
gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
regulator-name = "vcc_sdio";
regulator-type = "voltage";
regulator-min-microvolt = <1800000>;
@@ -86,7 +91,7 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
label = "firefly:blue:power";
linux,default-trigger = "heartbeat";
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
@@ -94,7 +99,7 @@
mode = <0x23>;
};
- user {
+ user_led: led-1 {
label = "firefly:yellow:user";
linux,default-trigger = "mmc1";
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
@@ -104,6 +109,14 @@
};
};
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_arm>;
};
@@ -161,6 +174,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -270,6 +287,14 @@
};
};
+&i2s0 {
+ status = "okay";
+};
+
+&i2s1 {
+ status = "okay";
+};
+
&io_domains {
status = "okay";
@@ -334,6 +359,12 @@
};
&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbdrd3 {
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
index 4fc055e..9d557eb 100644
--- a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -37,7 +37,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
@@ -46,7 +46,7 @@
};
&usb_host0_xhci {
- vbus-supply = <&vcc5v0_host_xhci>;
+ vbus-supply = <&vcc_host_5v>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts
index 4b9f9a8..018a3a5 100644
--- a/arch/arm/dts/rk3328-rock-pi-e.dts
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -1,58 +1,118 @@
-// SPDX-License-Identifier: GPL-2.0+
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * (C) Copyright 2020 Radxa
+ * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on ./rk3328-rock64.dts, which is
+ *
+ * Copyright (c) 2017 PINE64
*/
/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
#include "rk3328.dtsi"
/ {
- model = "Radxa Rockpi E";
- compatible = "radxa,rock-pi-e", "rockchip,rk3328";
+ model = "Radxa ROCK Pi E";
+ compatible = "radxa,rockpi-e", "rockchip,rk3328";
+
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ };
chosen {
- stdout-path = "serial2:1500000n8";
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1750000>;
+
+ /* This button is unpopulated out of the factory. */
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
};
gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pin>;
+ pinctrl-names = "default";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
};
vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
- regulator-name = "vcc_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_io>;
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ regulator-name = "vcc_sd";
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
};
- vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
- compatible = "regulator-fixed";
- enable-active-high;
- regulator-name = "vcc5v0_host_xhci";
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ enable-active-high;
+ regulator-name = "vcc_host_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
};
vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_wifi: vcc-wifi-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_en>;
+ regulator-name = "vcc_wifi";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_io>;
};
};
+&analog_sound {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_arm>;
};
@@ -72,13 +132,11 @@
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
+ mmc-ddr-1_8v;
mmc-hs200-1_8v;
- supports-emmc;
- disable-wp;
non-removable;
- num-slots = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc18_emmc>;
status = "okay";
@@ -88,180 +146,245 @@
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
clock_in_out = "input";
- phy-supply = <&vcc_io>;
+ phy-handle = <&rtl8211e>;
phy-mode = "rgmii";
+ phy-supply = <&vcc_io>;
pinctrl-names = "default";
pinctrl-0 = <&rgmiim1_pins>;
- snps,force_thresh_dma_mode;
- snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
+ snps,aal;
+ snps,rxpbl = <0x4>;
+ snps,txpbl = <0x4>;
tx_delay = <0x26>;
rx_delay = <0x11>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: ethernet-phy@1 {
+ reg = <1>;
+ pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
};
-&i2c1 {
+&gmac2phy {
status = "okay";
+};
- rk805: rk805@18 {
- compatible = "rockchip,rk805";
+&i2c1 {
status = "okay";
- reg = <0x18>;
- interrupt-parent = <&gpio2>;
- interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk805-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc5-supply = <&vcc_io>;
- vcc6-supply = <&vcc_sys>;
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-name = "vdd_logic";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1450000>;
- regulator-ramp-delay = <12500>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
- vcc_io: DCDC_REG4 {
- regulator-name = "vcc_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
- vcc_18: LDO_REG1 {
- regulator-name = "vcc_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
- vcc18_emmc: LDO_REG2 {
- regulator-name = "vcc18_emmc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
- vdd_10: LDO_REG3 {
- regulator-name = "vdd_10";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
- };
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
};
};
-&io_domains {
+&i2s1 {
status = "okay";
+};
+&io_domains {
+ pmuio-supply = <&vcc_io>;
vccio1-supply = <&vcc_io>;
vccio2-supply = <&vcc18_emmc>;
vccio3-supply = <&vcc_io>;
vccio4-supply = <&vcc_io>;
vccio5-supply = <&vcc_io>;
vccio6-supply = <&vcc_io>;
- pmuio-supply = <&vcc_io>;
+ status = "okay";
};
&pinctrl {
+ ephy {
+ eth_phy_int_pin: eth-phy-int-pin {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ eth_phy_reset_pin: eth-phy-reset-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ led_pin: led-pin {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
};
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_en: wifi-en {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
&sdmmc {
bus-width = <4>;
- cap-mmc-highspeed;
cap-sd-highspeed;
- card-detect-delay = <200>;
disable-wp;
- max-frequency = <150000000>;
- num-slots = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
- supports-sd;
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
vmmc-supply = <&vcc_sd>;
status = "okay";
};
&saradc {
+ vref-supply = <&vcc_18>;
status = "okay";
};
-&uart2 {
+&tsadc {
status = "okay";
};
-&usb20_otg {
+&u2phy {
status = "okay";
};
-&usb_host0_ehci {
+&u2phy_host {
+ status = "okay";
+};
+
+&uart2 {
status = "okay";
};
-&usb_host0_ohci {
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
index 2af32ae..3c3b137 100644
--- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -40,7 +40,7 @@
u-boot,dm-spl;
};
-&sdmmc0m1_gpio {
+&sdmmc0m1_pin {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/rk3328-rock64.dts b/arch/arm/dts/rk3328-rock64.dts
index ebf3eb2..1b0f7e4 100644
--- a/arch/arm/dts/rk3328-rock64.dts
+++ b/arch/arm/dts/rk3328-rock64.dts
@@ -10,6 +10,11 @@
model = "Pine64 Rock64";
compatible = "pine64,rock64", "rockchip,rk3328";
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -25,7 +30,7 @@
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -73,45 +78,43 @@
leds {
compatible = "gpio-leds";
- power {
+ power_led: led-0 {
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
- standby {
+ standby_led: led-1 {
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
+ spdif_sound: spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
- sound {
- compatible = "audio-graph-card";
- label = "rockchip,rk3328";
- dais = <&i2s1_p0
- &spdif_p0>;
+ simple-audio-card,codec {
+ sound-dai = <&spdif_dit>;
+ };
};
- spdif-dit {
+ spdif_dit: spdif-dit {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
-
- port {
- dit_p0_0: endpoint {
- remote-endpoint = <&spdif_p0_0>;
- };
- };
};
};
+&analog_sound {
+ status = "okay";
+};
+
&codec {
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
status = "okay";
-
- port@0 {
- codec_p0_0: endpoint {
- remote-endpoint = <&i2s1_p0_0>;
- };
- };
};
&cpu0 {
@@ -163,6 +166,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&hdmiphy {
status = "okay";
};
@@ -278,16 +285,12 @@
};
};
-&i2s1 {
+&i2s0 {
status = "okay";
+};
- i2s1_p0: port {
- i2s1_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&codec_p0_0>;
- };
- };
+&i2s1 {
+ status = "okay";
};
&io_domains {
@@ -337,12 +340,6 @@
&spdif {
pinctrl-0 = <&spdifm0_tx>;
status = "okay";
-
- spdif_p0: port {
- spdif_p0_0: endpoint {
- remote-endpoint = <&dit_p0_0>;
- };
- };
};
&spi0 {
@@ -384,6 +381,11 @@
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host0_ehci {
status = "okay";
};
diff --git a/arch/arm/dts/rk3328.dtsi b/arch/arm/dts/rk3328.dtsi
index 945387e..27e45d5 100644
--- a/arch/arm/dts/rk3328.dtsi
+++ b/arch/arm/dts/rk3328.dtsi
@@ -142,23 +142,6 @@
};
};
- amba: bus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dmac: dmac@ff1f0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff1f0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
- };
-
analog_sound: analog-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -305,7 +288,7 @@
status = "disabled";
};
- grf_gpio: grf-gpio {
+ grf_gpio: gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -317,15 +300,18 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_hevc@RK3328_PD_HEVC {
+ power-domain@RK3328_PD_HEVC {
reg = <RK3328_PD_HEVC>;
+ #power-domain-cells = <0>;
};
- pd_video@RK3328_PD_VIDEO {
+ power-domain@RK3328_PD_VIDEO {
reg = <RK3328_PD_VIDEO>;
+ #power-domain-cells = <0>;
};
- pd_vpu@RK3328_PD_VPU {
+ power-domain@RK3328_PD_VPU {
reg = <RK3328_PD_VPU>;
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+ #power-domain-cells = <0>;
};
};
@@ -452,7 +438,7 @@
};
wdt: watchdog@ff1a0000 {
- compatible = "snps,dw-wdt";
+ compatible = "rockchip,rk3328-wdt", "snps,dw-wdt";
reg = <0x0 0xff1a0000 0x0 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_WDT>;
@@ -503,6 +489,17 @@
status = "disabled";
};
+ dmac: dmac@ff1f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff1f0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
thermal-zones {
soc_thermal: soc-thermal {
polling-delay-passive = <20>;
@@ -552,9 +549,9 @@
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
+ pinctrl-0 = <&otp_pin>;
pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
+ pinctrl-2 = <&otp_pin>;
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
rockchip,grf = <&grf>;
@@ -822,7 +819,7 @@
#address-cells = <1>;
#size-cells = <1>;
- u2phy: usb2-phy@100 {
+ u2phy: usb2phy@100 {
compatible = "rockchip,rk3328-usb2phy";
reg = <0x100 0x10>;
clocks = <&xin24m>;
@@ -922,11 +919,12 @@
"mac_clk_tx", "clk_mac_ref",
"aclk_mac", "pclk_mac",
"clk_macphy";
- resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
- reset-names = "stmmaceth", "mac-phy";
+ resets = <&cru SRST_GMAC2PHY_A>;
+ reset-names = "stmmaceth";
phy-mode = "rmii";
phy-handle = <&phy>;
snps,txpbl = <0x4>;
+ clock_in_out = "output";
status = "disabled";
mdio {
@@ -934,7 +932,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC2PHY_OUT>;
@@ -966,6 +964,25 @@
status = "disabled";
};
+ usbdrd3: usb@ff600000 {
+ compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ status = "disabled";
+ };
+
/*
* U-boot Specific Change
*
@@ -1163,7 +1180,7 @@
rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
<0 RK_PA6 2 &pcfg_pull_none>;
};
- i2c3_gpio: i2c3-gpio {
+ i2c3_pins: i2c3-pins {
rockchip,pins =
<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -1234,7 +1251,7 @@
};
tsadc {
- otp_gpio: otp-gpio {
+ otp_pin: otp-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
@@ -1245,8 +1262,8 @@
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>,
- <1 RK_PB0 1 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+ <1 RK_PB0 1 &pcfg_pull_up>;
};
uart0_cts: uart0-cts {
@@ -1257,15 +1274,15 @@
rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
};
- uart0_rts_gpio: uart0-rts-gpio {
+ uart0_rts_pin: uart0-rts-pin {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>,
- <3 RK_PA6 4 &pcfg_pull_none>;
+ rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+ <3 RK_PA6 4 &pcfg_pull_up>;
};
uart1_cts: uart1-cts {
@@ -1276,22 +1293,22 @@
rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
};
- uart1_rts_gpio: uart1-rts-gpio {
+ uart1_rts_pin: uart1-rts-pin {
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart2-0 {
uart2m0_xfer: uart2m0-xfer {
- rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>,
- <1 RK_PA1 2 &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+ <1 RK_PA1 2 &pcfg_pull_up>;
};
};
uart2-1 {
uart2m1_xfer: uart2m1-xfer {
- rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>,
- <2 RK_PA1 1 &pcfg_pull_none>;
+ rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+ <2 RK_PA1 1 &pcfg_pull_up>;
};
};
@@ -1502,7 +1519,7 @@
rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
};
- sdmmc0m0_gpio: sdmmc0m0-gpio {
+ sdmmc0m0_pin: sdmmc0m0-pin {
rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
};
};
@@ -1512,7 +1529,7 @@
rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
};
- sdmmc0m1_gpio: sdmmc0m1-gpio {
+ sdmmc0m1_pin: sdmmc0m1-pin {
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
};
};
@@ -1545,7 +1562,7 @@
<1 RK_PA3 1 &pcfg_pull_up_8ma>;
};
- sdmmc0_gpio: sdmmc0-gpio {
+ sdmmc0_pins: sdmmc0-pins {
rockchip,pins =
<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1587,7 +1604,7 @@
<3 RK_PA7 3 &pcfg_pull_up_4ma>;
};
- sdmmc0ext_gpio: sdmmc0ext-gpio {
+ sdmmc0ext_pins: sdmmc0ext-pins {
rockchip,pins =
<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1632,7 +1649,7 @@
<1 RK_PC1 1 &pcfg_pull_up_8ma>;
};
- sdmmc1_gpio: sdmmc1-gpio {
+ sdmmc1_pins: sdmmc1-pins {
rockchip,pins =
<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1826,7 +1843,7 @@
tsadc_int: tsadc-int {
rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
};
- tsadc_gpio: tsadc-gpio {
+ tsadc_pin: tsadc-pin {
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};