sunxi: Re-enable h3 emac support
With the recent bug fixes for the sun8i_emac driver all known issues
are resolved, so we can re-enable the driver.
While at it, also enable the emac on the Orange Pi One.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Corentin LABBE <clabbe.montjoie@gmail.com>
Cc: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Jagan Teki <jteki@openedev.com>
diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts
index 0adf932..8df5c74 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts
@@ -94,6 +94,17 @@
status = "okay";
};
+&emac {
+ phy = <&phy1>;
+ phy-mode = "mii";
+ allwinner,use-internal-phy;
+ allwinner,leds-active-low;
+ status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig
index be8afca..81299e6 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/orangepi_one_defconfig
@@ -13,3 +13,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_USB_EHCI_HCD=y
+CONFIG_SUN8I_EMAC=y
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index 366fa08..2281aed 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -14,3 +14,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_SUN8I_EMAC=y
diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig
index c78aec3..3ec6dac 100644
--- a/configs/orangepi_pc_plus_defconfig
+++ b/configs/orangepi_pc_plus_defconfig
@@ -15,3 +15,4 @@
# CONFIG_CMD_FPGA is not set
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_SUN8I_EMAC=y
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
index 0bf79bf..5c97de1 100644
--- a/configs/pine64_plus_defconfig
+++ b/configs/pine64_plus_defconfig
@@ -10,3 +10,4 @@
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
+CONFIG_SUN8I_EMAC=y