armv8: ls1088a: add icid setup for platform devices
Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
the format of the registers is different.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index 435ffb0..feb3304 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -40,6 +40,14 @@
.le = _le \
}
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
+#ifdef CONFIG_FSL_LSCH2
+
#ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
#define SCFG_IS_LE true
#elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
@@ -100,11 +108,7 @@
#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
{ .port_id = (_port_id), .icid = (streamid) }
-#ifdef CONFIG_SYS_FSL_SEC_LE
-#define SEC_IS_LE true
-#elif defined(CONFIG_SYS_FSL_SEC_BE)
-#define SEC_IS_LE false
-#endif
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
#define SET_SEC_QI_ICID(streamid) \
SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
@@ -112,6 +116,38 @@
CONFIG_SYS_FSL_SEC_ADDR, \
CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define GUR_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define GUR_IS_LE false
+#endif
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+ SET_ICID_ENTRY(compat, streamid, streamid, \
+ offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+ compataddr, GUR_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+ SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+ CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+ SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+ AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(streamid) \
+ SET_GUR_ICID("fsl,esdhc", streamid, sdmm1_amqr,\
+ CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) (streamid)
+
+#endif /* CONFIG_FSL_LSCH2 */
+
#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
SET_ICID_ENTRY( \
(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
@@ -120,24 +156,22 @@
? NULL \
: "fsl,sec-v4.0-job-ring"), \
streamid, \
- (((streamid) << 16) | (streamid)), \
+ SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, \
FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+ SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+ SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
extern struct icid_id_table icid_tbl[];
-extern struct fman_icid_id_table fman_icid_tbl[];
extern int icid_tbl_sz;
-extern int fman_icid_tbl_sz;
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index c53cc57..383eb25 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -98,4 +98,10 @@
#define FSL_DPAA2_STREAM_ID_START 23
#define FSL_DPAA2_STREAM_ID_END 63
+#define FSL_SEC_STREAM_ID 64
+#define FSL_SEC_JR1_STREAM_ID 65
+#define FSL_SEC_JR2_STREAM_ID 66
+#define FSL_SEC_JR3_STREAM_ID 67
+#define FSL_SEC_JR4_STREAM_ID 68
+
#endif