diff --git a/src/arm/nxp/imx/e60k02.dtsi b/src/arm/nxp/imx/e60k02.dtsi
index dd03e38..13756d3 100644
--- a/src/arm/nxp/imx/e60k02.dtsi
+++ b/src/arm/nxp/imx/e60k02.dtsi
@@ -127,7 +127,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
diff --git a/src/arm/nxp/imx/e70k02.dtsi b/src/arm/nxp/imx/e70k02.dtsi
index 4e1bf08..dcc3c9d 100644
--- a/src/arm/nxp/imx/e70k02.dtsi
+++ b/src/arm/nxp/imx/e70k02.dtsi
@@ -145,7 +145,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
diff --git a/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
index abc9233..31b3fc9 100644
--- a/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
+++ b/src/arm/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -15,6 +15,22 @@
 		device_type = "memory";
 		reg = <0xa0000000 0x08000000>; /* 128MB */
 	};
+
+	usbotgphy: usbotgphy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgphy>;
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbh2phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
 };
 
 &cspi1 {
@@ -84,6 +100,52 @@
 				MX27_PAD_NFWE_B__NFWE_B 0x0
 			>;
 		};
+
+		pinctrl_usbotgphy: usbotgphygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RCV__GPIO2_25		0x1 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbh2phy: usbh2phygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
 	};
 };
 
@@ -95,3 +157,19 @@
 	nand-on-flash-bbt;
 	status = "okay";
 };
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "ulpi";
+	phys = <&usbotgphy>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	phys = <&usbh2phy>;
+	status = "okay";
+};
diff --git a/src/arm/nxp/imx/imx51-ts4800.dts b/src/arm/nxp/imx/imx51-ts4800.dts
index f740872..2bd0761 100644
--- a/src/arm/nxp/imx/imx51-ts4800.dts
+++ b/src/arm/nxp/imx/imx51-ts4800.dts
@@ -45,7 +45,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
+		pwms = <&pwm1 0 78770 0>;
 		brightness-levels = <0 150 200 255>;
 		default-brightness-level = <1>;
 		power-supply = <&backlight_reg>;
@@ -113,7 +113,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx53-kp-ddc.dts b/src/arm/nxp/imx/imx53-kp-ddc.dts
index 0e7f071..f6f1163 100644
--- a/src/arm/nxp/imx/imx53-kp-ddc.dts
+++ b/src/arm/nxp/imx/imx53-kp-ddc.dts
@@ -13,7 +13,7 @@
 
 	backlight_lcd: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		power-supply = <&reg_backlight>;
 		brightness-levels = <0 24 28 32 36
 				     40 44 48 52 56
diff --git a/src/arm/nxp/imx/imx53-kp.dtsi b/src/arm/nxp/imx/imx53-kp.dtsi
index 4508f34..ae5f87b 100644
--- a/src/arm/nxp/imx/imx53-kp.dtsi
+++ b/src/arm/nxp/imx/imx53-kp.dtsi
@@ -13,7 +13,7 @@
 		compatible = "pwm-beeper";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
+		pwms = <&pwm1 0 500000 0>;
 	};
 
 	gpio-buttons {
@@ -162,14 +162,6 @@
 	>;
 };
 
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
 &uart1 {
 	status = "okay";
 };
diff --git a/src/arm/nxp/imx/imx53-m53evk.dts b/src/arm/nxp/imx/imx53-m53evk.dts
index c323b4d..1353d98 100644
--- a/src/arm/nxp/imx/imx53-m53evk.dts
+++ b/src/arm/nxp/imx/imx53-m53evk.dts
@@ -41,7 +41,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
+		pwms = <&pwm1 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_backlight>;
@@ -313,7 +313,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx53-mba53.dts b/src/arm/nxp/imx/imx53-mba53.dts
index 6a37616..2117de8 100644
--- a/src/arm/nxp/imx/imx53-mba53.dts
+++ b/src/arm/nxp/imx/imx53-mba53.dts
@@ -17,7 +17,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;
diff --git a/src/arm/nxp/imx/imx53-ppd.dts b/src/arm/nxp/imx/imx53-ppd.dts
index 70c4a48..e939acc 100644
--- a/src/arm/nxp/imx/imx53-ppd.dts
+++ b/src/arm/nxp/imx/imx53-ppd.dts
@@ -167,7 +167,7 @@
 
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
 				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
 				     73 76 79 81 84 86 89 91 94 96 99 102 104
@@ -187,7 +187,7 @@
 
 		led-1 {
 			label = "alarm-brightness";
-			pwms = <&pwm1 0 100000>;
+			pwms = <&pwm1 0 100000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -628,14 +628,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx53-qsb-common.dtsi b/src/arm/nxp/imx/imx53-qsb-common.dtsi
index d804404..05d7a46 100644
--- a/src/arm/nxp/imx/imx53-qsb-common.dtsi
+++ b/src/arm/nxp/imx/imx53-qsb-common.dtsi
@@ -85,7 +85,7 @@
 		};
 	};
 
-	panel {
+	panel_dpi: panel {
 		compatible = "sii,43wvf1g";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display_power>;
diff --git a/src/arm/nxp/imx/imx53-qsb-hdmi.dtso b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
index c84e9b0..151e9ce 100644
--- a/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
+++ b/src/arm/nxp/imx/imx53-qsb-hdmi.dtso
@@ -10,8 +10,6 @@
 /plugin/;
 
 &{/} {
-	/delete-node/ panel;
-
 	hdmi: connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -82,6 +80,10 @@
 	};
 };
 
+&panel_dpi {
+	status = "disabled";
+};
+
 &tve {
 	status = "disabled";
 };
diff --git a/src/arm/nxp/imx/imx53-tqma53.dtsi b/src/arm/nxp/imx/imx53-tqma53.dtsi
index 294811b..b2d7271 100644
--- a/src/arm/nxp/imx/imx53-tqma53.dtsi
+++ b/src/arm/nxp/imx/imx53-tqma53.dtsi
@@ -202,14 +202,6 @@
 	};
 };
 
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/src/arm/nxp/imx/imx6dl-aristainetos_4.dts b/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a4..a5ac793 100644
--- a/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
+++ b/src/arm/nxp/imx/imx6dl-aristainetos_4.dts
@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -79,6 +79,5 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/src/arm/nxp/imx/imx6dl-aristainetos_7.dts b/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb788..5a25bdb 100644
--- a/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
+++ b/src/arm/nxp/imx/imx6dl-aristainetos_7.dts
@@ -49,7 +49,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
+		pwms = <&pwm3 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
@@ -69,6 +69,5 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/src/arm/nxp/imx/imx6dl-mamoj.dts b/src/arm/nxp/imx/imx6dl-mamoj.dts
index 0289519..72ee236 100644
--- a/src/arm/nxp/imx/imx6dl-mamoj.dts
+++ b/src/arm/nxp/imx/imx6dl-mamoj.dts
@@ -21,7 +21,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */
 		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
 		default-brightness-level = <7>;
 	};
@@ -303,7 +303,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-ba16.dtsi b/src/arm/nxp/imx/imx6q-ba16.dtsi
index f266f1b..09d9ca0 100644
--- a/src/arm/nxp/imx/imx6q-ba16.dtsi
+++ b/src/arm/nxp/imx/imx6q-ba16.dtsi
@@ -55,7 +55,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
 				      10  11  12  13  14  15  16  17  18  19
 				      20  21  22  23  24  25  26  27  28  29
@@ -349,7 +349,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-bosch-acc.dts b/src/arm/nxp/imx/imx6q-bosch-acc.dts
index 0264880..d3f14b4 100644
--- a/src/arm/nxp/imx/imx6q-bosch-acc.dts
+++ b/src/arm/nxp/imx/imx6q-bosch-acc.dts
@@ -36,7 +36,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 200000>;
+		pwms = <&pwm1 0 200000 0>;
 		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
 		num-interpolated-steps = <10>;
 		default-brightness-level = <60>;
@@ -117,14 +117,14 @@
 			color = <LED_COLOR_ID_RED>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm2 0 500000>;
+			pwms = <&pwm2 0 500000 0>;
 		};
 
 		led_white: led-1 {
 			color = <LED_COLOR_ID_WHITE>;
 			max-brightness = <248>;
 			default-state = "off";
-			pwms = <&pwm3 0 500000>;
+			pwms = <&pwm3 0 500000 0>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -484,28 +484,24 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-kp.dtsi b/src/arm/nxp/imx/imx6q-kp.dtsi
index 091903f..c425d42 100644
--- a/src/arm/nxp/imx/imx6q-kp.dtsi
+++ b/src/arm/nxp/imx/imx6q-kp.dtsi
@@ -15,7 +15,7 @@
 / {
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 255>;
 		num-interpolated-steps = <255>;
 		default-brightness-level = <250>;
@@ -23,7 +23,7 @@
 
 	beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 500000>;
+		pwms = <&pwm2 0 500000 0>;
 	};
 
 	lcd_display: display {
@@ -378,14 +378,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-novena.dts b/src/arm/nxp/imx/imx6q-novena.dts
index a7d5a68..d392b5b 100644
--- a/src/arm/nxp/imx/imx6q-novena.dts
+++ b/src/arm/nxp/imx/imx6q-novena.dts
@@ -67,7 +67,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 10000000>;
+		pwms = <&pwm1 0 10000000 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight_novena>;
 		power-supply = <&reg_lvds_lcd>;
@@ -465,7 +465,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx6q-pistachio.dts b/src/arm/nxp/imx/imx6q-pistachio.dts
index 46c6b96..56b77cc 100644
--- a/src/arm/nxp/imx/imx6q-pistachio.dts
+++ b/src/arm/nxp/imx/imx6q-pistachio.dts
@@ -124,7 +124,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0  /*1  2  3  4  5  6*/  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -571,7 +571,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-prti6q.dts b/src/arm/nxp/imx/imx6q-prti6q.dts
index 3508a2c..a7d5693 100644
--- a/src/arm/nxp/imx/imx6q-prti6q.dts
+++ b/src/arm/nxp/imx/imx6q-prti6q.dts
@@ -22,7 +22,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
 		default-brightness-level = <1>;
@@ -292,7 +292,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6q-var-dt6customboard.dts b/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
index 2290c12..0225a62 100644
--- a/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
+++ b/src/arm/nxp/imx/imx6q-var-dt6customboard.dts
@@ -18,7 +18,7 @@
 
 	backlight_lvds: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 248>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -203,7 +203,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi b/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
index 338d292..3a46ade 100644
--- a/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -13,7 +13,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <0>;
 		power-supply = <&reg_5v>;
@@ -212,7 +212,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi b/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
index db1bc51..758eaf9 100644
--- a/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -46,7 +46,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -346,7 +346,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi b/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
index 1e530d8..761566a 100644
--- a/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -64,7 +64,7 @@
 			active-low;
 			label = "imx6:red:front";
 			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 
@@ -233,7 +233,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx6qdl-emcon.dtsi b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
index 42b2ba2..a308a35 100644
--- a/src/arm/nxp/imx/imx6qdl-emcon.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-emcon.dtsi
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds_bl>;
 		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0 4 8 16 32 64 80 96 112
 			128 144 160 176 250
@@ -78,7 +78,7 @@
 	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
+		pwms = <&pwm4 0 50000 0>;
 		cooling-levels = <0 64 127 191 255>;
 		status = "disabled";
 	};
@@ -145,7 +145,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rgb_bl>;
 		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <
 			250 176 160 144 128 112
 			96 80 64 48 32 16 8 1
@@ -736,17 +736,14 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
index 535679c..48ffb3e 100644
--- a/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -520,7 +520,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
index 3e1c572..1eae438 100644
--- a/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -517,7 +517,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi b/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
index 0ffa035..c2ec857 100644
--- a/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -26,7 +26,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -570,7 +570,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;
diff --git a/src/arm/nxp/imx/imx6qdl-gw560x.dtsi b/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
index 46cf408..7cee983 100644
--- a/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw560x.dtsi
@@ -66,7 +66,7 @@
 
 	backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -619,7 +619,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-gw5903.dtsi b/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
index a74cde0..fbc704c 100644
--- a/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw5903.dtsi
@@ -56,7 +56,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -502,7 +502,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-gw5904.dtsi b/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
index 1e72380..0705062 100644
--- a/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-gw5904.dtsi
@@ -70,7 +70,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -586,7 +586,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-icore.dtsi b/src/arm/nxp/imx/imx6qdl-icore.dtsi
index efe1152..9975b6e 100644
--- a/src/arm/nxp/imx/imx6qdl-icore.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-icore.dtsi
@@ -20,7 +20,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
+		pwms = <&pwm3 0 100000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -245,7 +245,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-mba6.dtsi b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
index 4d2abcd..60aa1e9 100644
--- a/src/arm/nxp/imx/imx6qdl-mba6.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-mba6.dtsi
@@ -298,6 +298,7 @@
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		vdd-supply = <&reg_mba6_3p3v>;
 
 		ethernet@1 {
 			compatible = "usb424,9e00";
@@ -441,8 +442,6 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
-
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
 			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
 			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
diff --git a/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi b/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
index f2542d7..a30cf0d 100644
--- a/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -108,7 +108,7 @@
 
 	backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -117,7 +117,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -499,7 +499,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -512,7 +511,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 32a110a..33174fe 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -183,7 +183,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -192,7 +192,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -201,7 +201,7 @@
 
 	backlight_lvds1: backlight-lvds1 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
+		pwms = <&pwm2 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -735,14 +735,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -755,7 +753,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 414196b..8e64314 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -17,7 +17,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -26,7 +26,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -641,7 +641,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -654,7 +653,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi b/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
index f278b14..1211772 100644
--- a/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -134,7 +134,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -143,7 +143,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -596,7 +596,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -609,7 +608,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi b/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
index 1ca4d21..0b4c09b 100644
--- a/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -15,7 +15,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		status = "okay";
 	};
 
@@ -224,7 +224,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi b/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
index 68e9718..6656e2e 100644
--- a/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -144,8 +144,8 @@
 	};
 
 	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
+		compatible = "fsl,imx-sabreauto-spdif",
+			     "fsl,imx-audio-spdif";
 		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
@@ -153,7 +153,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -802,7 +802,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi b/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
index 84c8a95..9c502bf 100644
--- a/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -99,7 +99,7 @@
 		#clock-cells = <0>;
 		clock-frequency = <22000000>;
 		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+		pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
 		status = "okay";
 	};
 
@@ -162,7 +162,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -171,7 +171,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -654,21 +654,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-sabresd.dtsi b/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
index 4fe5876..8f4f5fb 100644
--- a/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-sabresd.dtsi
@@ -119,7 +119,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -755,7 +755,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-savageboard.dtsi b/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36..6823a63 100644
--- a/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-savageboard.dtsi
@@ -83,7 +83,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <4>;
 		power-supply = <&reg_3p3v>;
-		pwms = <&pwm1 0 10000>;
+		pwms = <&pwm1 0 10000 0>;
 	};
 
 	reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
index d59d5d0..6ab71a7 100644
--- a/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -282,7 +282,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/src/arm/nxp/imx/imx6qdl-udoo.dtsi b/src/arm/nxp/imx/imx6qdl-udoo.dtsi
index 647ba5e..14272b4 100644
--- a/src/arm/nxp/imx/imx6qdl-udoo.dtsi
+++ b/src/arm/nxp/imx/imx6qdl-udoo.dtsi
@@ -59,16 +59,6 @@
 		};
 	};
 
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-		gpio = <&gpio7 12 0>;
-	};
-
 	reg_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_panel";
@@ -285,9 +275,18 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usbotg {
diff --git a/src/arm/nxp/imx/imx6qdl.dtsi b/src/arm/nxp/imx/imx6qdl.dtsi
index 8431b8a..d2200c9 100644
--- a/src/arm/nxp/imx/imx6qdl.dtsi
+++ b/src/arm/nxp/imx/imx6qdl.dtsi
@@ -397,11 +397,10 @@
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_ESAI_MEM>,
 						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 						 <&clks IMX6QDL_CLK_ESAI_IPG>,
 						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "spba";
+					clock-names = "core", "extal", "fsys", "spba";
 					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 					dma-names = "rx", "tx";
 					status = "disabled";
diff --git a/src/arm/nxp/imx/imx6sl-evk.dts b/src/arm/nxp/imx/imx6sl-evk.dts
index 239bc6d..31eee04 100644
--- a/src/arm/nxp/imx/imx6sl-evk.dts
+++ b/src/arm/nxp/imx/imx6sl-evk.dts
@@ -23,7 +23,7 @@
 
 	backlight_display: backlight_display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -584,10 +584,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &reg_vdd1p1 {
diff --git a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
index 5636fb3..03d6965 100644
--- a/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/src/arm/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -138,7 +138,7 @@
 		pinctrl-0 = <&pinctrl_zforce>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 		touchscreen-size-x = <1072>;
@@ -163,7 +163,7 @@
 		pinctrl-0 = <&pinctrl_ricoh_gpio>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
diff --git a/src/arm/nxp/imx/imx6sll-evk.dts b/src/arm/nxp/imx/imx6sll-evk.dts
index e3e9b0e..febc2dd 100644
--- a/src/arm/nxp/imx/imx6sll-evk.dts
+++ b/src/arm/nxp/imx/imx6sll-evk.dts
@@ -26,7 +26,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -314,10 +314,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &snvs_poweroff {
diff --git a/src/arm/nxp/imx/imx6sll.dtsi b/src/arm/nxp/imx/imx6sll.dtsi
index 3659fd5..ddeb5b3 100644
--- a/src/arm/nxp/imx/imx6sll.dtsi
+++ b/src/arm/nxp/imx/imx6sll.dtsi
@@ -683,7 +683,6 @@
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
diff --git a/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts b/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
index cd9cbc9..1c1515a 100644
--- a/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
+++ b/src/arm/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -18,7 +18,7 @@
 
 	backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_3p3v>;
@@ -83,7 +83,7 @@
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
+		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
@@ -229,10 +229,8 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
 };
 
 &ssi1 {
diff --git a/src/arm/nxp/imx/imx6sx-sdb.dtsi b/src/arm/nxp/imx/imx6sx-sdb.dtsi
index c6e85e4..7d4170c 100644
--- a/src/arm/nxp/imx/imx6sx-sdb.dtsi
+++ b/src/arm/nxp/imx/imx6sx-sdb.dtsi
@@ -23,7 +23,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -184,8 +184,8 @@
 	};
 
 	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx6sx-sdb-spdif";
+		compatible = "fsl,imx6sx-sdb-spdif",
+			     "fsl,imx-audio-spdif";
 		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -295,10 +295,8 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
 };
 
 &snvs_poweroff {
diff --git a/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts b/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
index bfcd8f7..f999eb2 100644
--- a/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
+++ b/src/arm/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -46,19 +46,19 @@
 		led-1 {
 			label = "red";
 			max-brightness = <255>;
-			pwms = <&pwm6 0 50000>;
+			pwms = <&pwm6 0 50000 0>;
 		};
 
 		led-2 {
 			label = "green";
 			max-brightness = <255>;
-			pwms = <&pwm2 0 50000>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 
 		led-3 {
 			label = "blue";
 			max-brightness = <255>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 };
@@ -505,24 +505,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
 };
 
 &pwm6 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
 };
 
 &reg_arm {
diff --git a/src/arm/nxp/imx/imx6sx.dtsi b/src/arm/nxp/imx/imx6sx.dtsi
index 0de359d..b386448 100644
--- a/src/arm/nxp/imx/imx6sx.dtsi
+++ b/src/arm/nxp/imx/imx6sx.dtsi
@@ -339,15 +339,14 @@
 				};
 
 				esai: esai@2024000 {
-					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
 						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
+					clock-names = "core", "extal",
 						      "fsys", "spba";
 					dmas = <&sdma 23 21 0>,
 					       <&sdma 24 21 0>;
@@ -929,7 +928,6 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -957,7 +955,6 @@
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
diff --git a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
index f10f052..9cfb99a 100644
--- a/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/src/arm/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -16,7 +16,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -277,7 +277,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts b/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
index 1762bc4..ed61ae8 100644
--- a/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
+++ b/src/arm/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
@@ -18,7 +18,7 @@
 
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm5 0 50000>;
+		pwms = <&pwm5 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -168,7 +168,6 @@
 };
 
 &pwm5 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-geam.dts b/src/arm/nxp/imx/imx6ul-geam.dts
index 2ca18f3..cdbb8c4 100644
--- a/src/arm/nxp/imx/imx6ul-geam.dts
+++ b/src/arm/nxp/imx/imx6ul-geam.dts
@@ -21,7 +21,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -194,7 +194,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index af337f1..be3cacb 100644
--- a/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/src/arm/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -9,7 +9,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_5v>;
@@ -143,7 +143,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-isiot.dtsi b/src/arm/nxp/imx/imx6ul-isiot.dtsi
index 14fc482..ee86c36 100644
--- a/src/arm/nxp/imx/imx6ul-isiot.dtsi
+++ b/src/arm/nxp/imx/imx6ul-isiot.dtsi
@@ -20,7 +20,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -187,7 +187,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts b/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
index 0c64370..4e8191a 100644
--- a/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
+++ b/src/arm/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
+		pwms = <&pwm7 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -41,7 +41,6 @@
 };
 
 &pwm7 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi b/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
index 33d5f27..d8f7877 100644
--- a/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
+++ b/src/arm/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -35,7 +35,7 @@
 
 	pwm-beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
+		pwms = <&pwm8 0 5000 0>;
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -152,7 +152,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ul-pico.dtsi b/src/arm/nxp/imx/imx6ul-pico.dtsi
index 07dcecb..fe307f4 100644
--- a/src/arm/nxp/imx/imx6ul-pico.dtsi
+++ b/src/arm/nxp/imx/imx6ul-pico.dtsi
@@ -22,7 +22,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -177,7 +177,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
new file mode 100644
index 0000000..cfcd878
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
new file mode 100644
index 0000000..87c9434
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
new file mode 100644
index 0000000..6bb12e0
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_button>;
+
+		button-0 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			label = "SW2";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-blue {
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			label = "LED_B";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-green {
+			gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+			label = "LED_G";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "LED_R";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-user {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			label = "User";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	reg_5v_sys: regulator-5v-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3_in: regulator-3v3-in {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_IN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_in>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vmmc>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_csi1>;
+	status = "disabled"; /* LED Blue & Green shared */
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&reg_dcdc_3v3 {
+	vin-supply = <&reg_3v3_in>;
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_button: buttongrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x0b0b0
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x0b0b0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x79
+		>;
+	};
+
+	pinctrl_reg_vmmc: usdhc1regvmmc {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pin = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pin = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pin = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pin = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pin = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cd {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+};
diff --git a/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi b/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi
new file mode 100644
index 0000000..f5ad6b5
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-seeed-npi.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Seeed NPi-iMX6ULL Dev Board";
+	compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_dram_1v35: regulator-dram-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "DRAM_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ARM_SOC_IN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_dcdc_1v8: regulator-dcdc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vqmmc>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_1v8>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled";
+};
+
+&usdhc1 {
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_reg_vqmmc: usdhc1regvqmmc {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/src/arm/nxp/imx/imx6ull-tarragon-master.dts b/src/arm/nxp/imx/imx6ull-tarragon-master.dts
index 67007ce..f9bbd58 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-master.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-master.dts
@@ -45,7 +45,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 
@@ -63,7 +63,7 @@
 		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6ull-tarragon-slave.dts b/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
index cee223b..ef06619 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-slave.dts
@@ -23,7 +23,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts b/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
index 7fd53b7..83db65b 100644
--- a/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
+++ b/src/arm/nxp/imx/imx6ull-tarragon-slavext.dts
@@ -45,7 +45,7 @@
 		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 		spi-cpha;
 		spi-cpol;
-		spi-max-frequency = <16000000>;
+		spi-max-frequency = <12000000>;
 	};
 };
 
diff --git a/src/arm/nxp/imx/imx6ull-uti260b.dts b/src/arm/nxp/imx/imx6ull-uti260b.dts
new file mode 100644
index 0000000..e4576d5
--- /dev/null
+++ b/src/arm/nxp/imx/imx6ull-uti260b.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org>
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "UNI-T UTi260B Thermal Camera";
+	compatible = "uni-t,uti260b", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_backlight_enable>;
+		power-supply = <&reg_vsd>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		/* generic 26650 battery */
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <5000000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3300000>;
+	};
+
+	tp5000: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat1>;
+	};
+
+	fuel-gauge {
+		compatible = "adc-battery";
+		charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		io-channel-names = "voltage";
+		io-channels = <&adc1 7>;
+		monitored-battery = <&battery>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat2>;
+		power-supplies = <&tp5000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gpio_keys>;
+		autorepeat;
+
+		up-key {
+			label = "Up";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+
+		down-key {
+			label = "Down";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+		};
+
+		left-key {
+			label = "Left";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+		};
+
+		right-key {
+			label = "Right";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+		};
+
+		ok-key {
+			label = "Ok";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		return-key {
+			label = "Return";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+
+		play-key {
+			label = "Media";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEDIA>;
+		};
+
+		trigger-key {
+			label = "Trigger";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_TRIGGER>;
+		};
+
+		power-key {
+			label = "Power";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		light-key {
+			label = "Light";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_led_ctrl>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_FLASH;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff>;
+	};
+
+	reg_vref: regulator-vref-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	reg_vsd: regulator-vsd {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	#io-channel-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_adc>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_csi>;
+	status = "okay";
+
+	port {
+		parallel_from_gc0308: endpoint {
+			remote-endpoint = <&gc0308_to_parallel>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_spi3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "inanbo,t28cp45tn89-v17";
+		reg = <0>;
+		backlight = <&panel_backlight>;
+		power-supply = <&reg_vsd>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <1000000>;
+		spi-rx-bus-width = <0>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	ir-reset-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		line-name = "ir-reset-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_ir_reset>;
+	};
+};
+
+&gpio2 {
+	/* configuring this to output-high results in poweroff */
+	power-en-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		line-name = "power-en-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c1>;
+	status = "okay";
+
+	camera@21 {
+		compatible = "galaxycore,gc0308";
+		reg = <0x21>;
+		clocks = <&clks IMX6UL_CLK_CSI>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gc0308>;
+		powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		vdd28-supply = <&reg_vsd>;
+
+		port {
+			gc0308_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_gc0308>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <1>; /* active high */
+				vsync-active = <1>; /* active high */
+				data-active = <1>; /* active high */
+				pclk-sample = <1>; /* sample on rising edge */
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c2>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_pwm>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	/* USB-C connector */
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	/* thermal sensor */
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	/* MicroSD */
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>;
+	pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>;
+	pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>;
+	wakeup-source;
+	vmmc-supply = <&reg_vsd>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* eMMC */
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_sdhc2>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_wdog>;
+};
+
+&iomuxc {
+	mux_adc: adcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0xb0
+		>;
+	};
+
+	mux_backlight_enable: blenablegrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x3008
+		>;
+	};
+
+	mux_charger_stat1: charger1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x3008
+		>;
+	};
+
+	mux_charger_stat2: charger2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x3008
+		>;
+	};
+
+	mux_csi: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x1b088
+		>;
+	};
+
+	mux_gc0308: gc0308grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x1e038
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x1b088
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x1b088
+		>;
+	};
+
+	mux_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x3008
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x3008
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x3008
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x3008
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x3008
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x3008
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x3008
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x3008
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x3008
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x3008
+		>;
+	};
+
+	mux_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	mux_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x4001f8a8
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x4001f8a8
+		>;
+	};
+
+	mux_ir_reset: irresetgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x3008
+		>;
+	};
+
+	mux_lcd_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x79
+		>;
+	};
+
+	mux_lcd_data: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x79
+		>;
+	};
+
+	mux_led_ctrl: ledctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x3008
+		>;
+	};
+
+	mux_poweroff: poweroffgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x3008
+		>;
+	};
+
+	mux_poweroff2: poweroff2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x3008
+		>;
+	};
+
+	mux_pwm: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x110b0
+		>;
+	};
+
+	mux_sdhc1: sdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x17059
+		>;
+	};
+
+	mux_sdhc1_100mhz: sdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170b9
+		>;
+	};
+
+	mux_sdhc1_200mhz: sdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170f9
+		>;
+	};
+
+	mux_sdhc1_cd: sdhc1-cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x17059
+		>;
+	};
+
+	mux_sdhc2: sdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x17059
+		>;
+	};
+
+	mux_spi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x100b1
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x3008
+		>;
+	};
+
+	mux_uart: uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	mux_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x30b0
+		>;
+	};
+};
diff --git a/src/arm/nxp/imx/imx7s.dtsi b/src/arm/nxp/imx/imx7s.dtsi
index 9c81c6b..22dd724 100644
--- a/src/arm/nxp/imx/imx7s.dtsi
+++ b/src/arm/nxp/imx/imx7s.dtsi
@@ -636,6 +636,15 @@
 					clock-names = "snvs-rtc";
 				};
 
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;