mpc85xx: Add gdsys ControlCenter Digital board
The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC.
It boots from SPI-Flash but can be configured to boot from SD-card for
factory programming and testing.
On board peripherals include:
- 2x GbE
- Lattice ECP3 FPGA connected via PCIe
- mSATA RAID1
- USB host
- DisplayPort video output
- Atmel TPM
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc>
Signed-off-by: Andy Fleming <afleming@freescale.com>
diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c
new file mode 100644
index 0000000..e4323181
--- /dev/null
+++ b/board/gdsys/p1022/sdhc_boot.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <malloc.h>
+
+/*
+ * The environment variables are written to just after the u-boot image
+ * on SDCard, so we must read the MBR to get the start address and code
+ * length of the u-boot image, then calculate the address of the env.
+ */
+#define ESDHC_BOOT_IMAGE_SIZE 0x48
+#define ESDHC_BOOT_IMAGE_ADDR 0x50
+
+int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
+{
+ u8 *tmp_buf;
+ u32 blklen, code_offset, code_len, n;
+
+ blklen = mmc->read_bl_len;
+ tmp_buf = malloc(blklen);
+ if (!tmp_buf)
+ return 1;
+
+ /* read out the first block, get the config data information */
+ n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf);
+ if (!n) {
+ free(tmp_buf);
+ return 1;
+ }
+
+ /* Get the Source Address, from offset 0x50 */
+ code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR);
+
+ /* Get the code size from offset 0x48 */
+ code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
+
+ *env_addr = code_offset + code_len;
+
+ free(tmp_buf);
+
+ return 0;
+}