arm: spear: Move to common SPL infrastructure
The SPL implementation for SPEAr600 is older than the common SPL
infrastructure. This patch now moves the SPEAr600 SPL over to the
common SPL code.
Tested on the only SPEAr board that currently uses SPL in mainline
U-Boot, the x600.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>
diff --git a/arch/arm/cpu/arm926ejs/spear/spl.c b/arch/arm/cpu/arm926ejs/spear/spl.c
index b550404..a60f583 100644
--- a/arch/arm/cpu/arm926ejs/spear/spl.c
+++ b/arch/arm/cpu/arm926ejs/spear/spl.c
@@ -8,12 +8,14 @@
*/
#include <common.h>
+#include <spl.h>
#include <version.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_defs.h>
#include <asm/arch/spr_misc.h>
#include <asm/arch/spr_syscntl.h>
+#include <linux/mtd/st_smi.h>
static void ddr_clock_init(void)
{
@@ -205,55 +207,51 @@
#endif
}
-void lowlevel_init(void)
+/*
+ * SNOR (Serial NOR flash) related functions
+ */
+static void snor_init(void)
+{
+ struct smi_regs *const smicntl =
+ (struct smi_regs * const)CONFIG_SYS_SMI_BASE;
+
+ /* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
+ writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
+ &smicntl->smi_cr1);
+}
+
+u32 spl_boot_device(void)
+{
+ u32 mode;
+
+ /* Currently only SNOR is supported as the only */
+ if (snor_boot_selected()) {
+ /* SNOR-SMI initialization */
+ snor_init();
+
+ mode = BOOT_DEVICE_NOR;
+ }
+
+ return mode;
+}
+
+void board_init_f(ulong dummy)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
- const char *u_boot_rev = U_BOOT_VERSION;
/* Initialize PLLs */
sys_init();
- /* Initialize UART */
- serial_init();
-
- /* Print U-Boot SPL version string */
- serial_puts("\nU-Boot SPL ");
- /* Avoid a second "U-Boot" coming from this string */
- u_boot_rev = &u_boot_rev[7];
- serial_puts(u_boot_rev);
- serial_puts(" (");
- serial_puts(U_BOOT_DATE);
- serial_puts(" - ");
- serial_puts(U_BOOT_TIME);
- serial_puts(")\n");
-
-#if defined(CONFIG_OS_BOOT)
- writel(readl(&misc_p->periph1_clken) | PERIPH_UART1,
- &misc_p->periph1_clken);
-#endif
+ preloader_console_init();
+ arch_cpu_init();
/* Enable IPs (release reset) */
writel(PERIPH_RST_ALL, &misc_p->periph1_rst);
/* Initialize MPMC */
- serial_puts("Configure DDR\n");
+ puts("Configure DDR\n");
mpmc_init();
-
- /* SoC specific initialization */
- soc_init();
-}
-
-void spear_late_init(void)
-{
- struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ spear_late_init();
- writel(0x80000007, &misc_p->arb_icm_ml1);
- writel(0x80000007, &misc_p->arb_icm_ml2);
- writel(0x80000007, &misc_p->arb_icm_ml3);
- writel(0x80000007, &misc_p->arb_icm_ml4);
- writel(0x80000007, &misc_p->arb_icm_ml5);
- writel(0x80000007, &misc_p->arb_icm_ml6);
- writel(0x80000007, &misc_p->arb_icm_ml7);
- writel(0x80000007, &misc_p->arb_icm_ml8);
- writel(0x80000007, &misc_p->arb_icm_ml9);
+ board_init_r(NULL, 0);
}