spl: Allow tiny printf() to be controlled in SPL and TPL
At present there is only one control for this and it is used for both SPL
and TPL. But SPL might have a lot more space than TPL so the extra cost of
a full printf() might be acceptable.
Split the option into two, providing separate SPL and TPL controls. The
TPL setting defaults to the same as SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b0e315..7086db3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -954,7 +954,7 @@
select USB if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
imply CMD_GPT
imply CMD_UBI if NAND
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ed8056e..4c87cbc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,7 +11,7 @@
select ARM_ERRATA_454179
select ARM_ERRATA_621766
select ARM_ERRATA_725233
- select USE_TINY_PRINTF if SPL
+ select SPL_USE_TINY_PRINTF if SPL
imply NAND_OMAP_GPMC
imply SPL_FS_EXT4
imply SPL_FS_FAT
@@ -31,7 +31,7 @@
config OMAP44XX
bool "OMAP44XX SoC"
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply NAND_OMAP_ELM
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
@@ -124,7 +124,7 @@
imply SPL_NAND_SUPPORT
imply SYS_I2C_OMAP24XX
imply SYS_THUMB_BUILD
- imply USE_TINY_PRINTF
+ imply SPL_USE_TINY_PRINTF
help
Support for AM335x SOC from Texas Instruments.
The AM335x high performance SOC features a Cortex-A8
diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig
index 52ab891..8343000 100644
--- a/arch/arm/mach-rmobile/Kconfig
+++ b/arch/arm/mach-rmobile/Kconfig
@@ -32,7 +32,7 @@
imply SPL_SYS_MALLOC_SIMPLE
imply SPL_TINY_MEMSET
imply SPL_YMODEM_SUPPORT
- imply USE_TINY_PRINTF
+ imply SPL_USE_TINY_PRINTF
config RZA1
prompt "Renesas ARM SoCs RZ/A1 (32bit)"
diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32
index 1441c80..d5e437f 100644
--- a/arch/arm/mach-rmobile/Kconfig.32
+++ b/arch/arm/mach-rmobile/Kconfig.32
@@ -65,7 +65,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_KOELSCH
@@ -74,7 +74,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_LAGER
@@ -83,7 +83,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_KZM9G
@@ -95,7 +95,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_SILK
@@ -104,7 +104,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_PORTER
@@ -113,7 +113,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_STOUT
@@ -122,7 +122,7 @@
select DM_SERIAL
select SPL_TINY_MEMSET
select SUPPORT_SPL
- select USE_TINY_PRINTF
+ select SPL_USE_TINY_PRINTF
imply CMD_DM
endchoice
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 1d91464..ee79953 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -45,7 +45,7 @@
select SPL_SYSCON if SPL
select ETH_DESIGNWARE_SOCFPGA
imply FPGA_SOCFPGA
- imply USE_TINY_PRINTF
+ imply SPL_USE_TINY_PRINTF
config TARGET_SOCFPGA_CYCLONE5
bool
@@ -59,7 +59,7 @@
imply SPL_SIZE_LIMIT_SUBTRACT_MALLOC
imply SPL_STACK_R
imply SPL_SYS_MALLOC_SIMPLE
- imply USE_TINY_PRINTF
+ imply SPL_USE_TINY_PRINTF
config TARGET_SOCFPGA_STRATIX10
bool