gpio: at91: Implement ops set_flags
Support GPIO configuration with following flags:
- in, out, out_active
- open_drain, pull_up
Signed-off-by: Zixun LI <admin@hifiphile.com>
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index ee45aaf..c3d0dd6 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -228,6 +228,17 @@
val = readl(&at91_port->psr);
return !!(val & mask);
}
+
+static void at91_set_port_multi_drive(struct at91_port *at91_port, int offset, int is_on)
+{
+ u32 mask;
+
+ mask = 1 << offset;
+ if (is_on)
+ writel(mask, &at91_port->mder);
+ else
+ writel(mask, &at91_port->mddr);
+}
#endif
static void at91_set_port_input(struct at91_port *at91_port, int offset,
@@ -567,6 +578,33 @@
return GPIOF_INPUT;
}
+static int at91_gpio_set_flags(struct udevice *dev, unsigned int offset,
+ ulong flags)
+{
+ struct at91_port_priv *port = dev_get_priv(dev);
+ ulong supported_mask;
+
+ supported_mask = GPIOD_OPEN_DRAIN | GPIOD_MASK_DIR | GPIOD_PULL_UP;
+ if (flags & ~supported_mask)
+ return -ENOTSUPP;
+
+ if (flags & GPIOD_IS_OUT) {
+ if (flags & GPIOD_OPEN_DRAIN)
+ at91_set_port_multi_drive(port->regs, offset, true);
+ else
+ at91_set_port_multi_drive(port->regs, offset, false);
+
+ at91_set_port_output(port->regs, offset, flags & GPIOD_IS_OUT_ACTIVE);
+
+ } else if (flags & GPIOD_IS_IN) {
+ at91_set_port_input(port->regs, offset, false);
+ }
+ if (flags & GPIOD_PULL_UP)
+ at91_set_port_pullup(port->regs, offset, true);
+
+ return 0;
+}
+
static const char *at91_get_bank_name(uint32_t base_addr)
{
switch (base_addr) {
@@ -595,6 +633,7 @@
.get_value = at91_gpio_get_value,
.set_value = at91_gpio_set_value,
.get_function = at91_gpio_get_function,
+ .set_flags = at91_gpio_set_flags,
};
static int at91_gpio_probe(struct udevice *dev)