fpga: xilinx: Simplify load/dump/info function handling
Connect FPGA version with appropriate operations
to remove huge switch-cases for every FPGA family.
Tested on Zynq. Spartan2/Spartan3/Virtex2 just compile test.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index b0e9cb3..8837f5c 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -19,17 +19,6 @@
#include <spartan3.h>
#include <zynqpl.h>
-#if 0
-#define FPGA_DEBUG
-#endif
-
-/* Define FPGA_DEBUG to get debug printf's */
-#ifdef FPGA_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
/* Local Static Functions */
static int xilinx_validate(xilinx_desc *desc, char *fn);
@@ -143,116 +132,22 @@
int xilinx_load(xilinx_desc *desc, const void *buf, size_t bsize)
{
- int ret_val = FPGA_FAIL; /* assume a failure */
-
if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
- } else
- switch (desc->family) {
- case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
- PRINTF ("%s: Launching the Spartan-II Loader...\n",
- __FUNCTION__);
- ret_val = spartan2_load(desc, buf, bsize);
-#else
- printf ("%s: No support for Spartan-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
- PRINTF ("%s: Launching the Spartan-III Loader...\n",
- __FUNCTION__);
- ret_val = spartan3_load(desc, buf, bsize);
-#else
- printf ("%s: No support for Spartan-III devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_virtex2:
-#if defined(CONFIG_FPGA_VIRTEX2)
- PRINTF ("%s: Launching the Virtex-II Loader...\n",
- __FUNCTION__);
- ret_val = virtex2_load(desc, buf, bsize);
-#else
- printf ("%s: No support for Virtex-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
- PRINTF("%s: Launching the Zynq PL Loader...\n",
- __func__);
- ret_val = zynq_load(desc, buf, bsize);
-#else
- printf("%s: No support for Zynq devices.\n",
- __func__);
-#endif
- break;
-
- default:
- printf ("%s: Unsupported family type, %d\n",
- __FUNCTION__, desc->family);
- }
+ return FPGA_FAIL;
+ }
- return ret_val;
+ return desc->operations->load(desc, buf, bsize);
}
int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize)
{
- int ret_val = FPGA_FAIL; /* assume a failure */
-
if (!xilinx_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
- } else
- switch (desc->family) {
- case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
- PRINTF ("%s: Launching the Spartan-II Reader...\n",
- __FUNCTION__);
- ret_val = spartan2_dump(desc, buf, bsize);
-#else
- printf ("%s: No support for Spartan-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
- PRINTF ("%s: Launching the Spartan-III Reader...\n",
- __FUNCTION__);
- ret_val = spartan3_dump(desc, buf, bsize);
-#else
- printf ("%s: No support for Spartan-III devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_virtex2:
-#if defined( CONFIG_FPGA_VIRTEX2)
- PRINTF ("%s: Launching the Virtex-II Reader...\n",
- __FUNCTION__);
- ret_val = virtex2_dump(desc, buf, bsize);
-#else
- printf ("%s: No support for Virtex-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
- PRINTF("%s: Launching the Zynq PL Reader...\n",
- __func__);
- ret_val = zynq_dump(desc, buf, bsize);
-#else
- printf("%s: No support for Zynq devices.\n",
- __func__);
-#endif
- break;
-
- default:
- printf ("%s: Unsupported family type, %d\n",
- __FUNCTION__, desc->family);
- }
+ return FPGA_FAIL;
+ }
- return ret_val;
+ return desc->operations->dump(desc, buf, bsize);
}
int xilinx_info(xilinx_desc *desc)
@@ -315,47 +210,7 @@
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
- switch (desc->family) {
- case xilinx_spartan2:
-#if defined(CONFIG_FPGA_SPARTAN2)
- spartan2_info(desc);
-#else
- /* just in case */
- printf ("%s: No support for Spartan-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_spartan3:
-#if defined(CONFIG_FPGA_SPARTAN3)
- spartan3_info(desc);
-#else
- /* just in case */
- printf ("%s: No support for Spartan-III devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_virtex2:
-#if defined(CONFIG_FPGA_VIRTEX2)
- virtex2_info(desc);
-#else
- /* just in case */
- printf ("%s: No support for Virtex-II devices.\n",
- __FUNCTION__);
-#endif
- break;
- case xilinx_zynq:
-#if defined(CONFIG_FPGA_ZYNQPL)
- zynq_info(desc);
-#else
- /* just in case */
- printf("%s: No support for Zynq devices.\n",
- __func__);
-#endif
- /* Add new family types here */
- default:
- /* we don't need a message here - we give one up above */
- ;
- }
+ desc->operations->info(desc);
} else
printf ("No Device Function Table.\n");