Merge branch 'master' of git://git.denx.de/u-boot-mmc
diff --git a/README b/README
index 216f0c7..7cb7c4f 100644
--- a/README
+++ b/README
@@ -1525,6 +1525,16 @@
this to the maximum filesize (in bytes) for the buffer.
Default is 4 MiB if undefined.
+ DFU_DEFAULT_POLL_TIMEOUT
+ Poll timeout [ms], is the timeout a device can send to the
+ host. The host must wait for this timeout before sending
+ a subsequent DFU_GET_STATUS request to the device.
+
+ DFU_MANIFEST_POLL_TIMEOUT
+ Poll timeout [ms], which the device sends to the host when
+ entering dfuMANIFEST state. Host waits this timeout, before
+ sending again an USB request to the device.
+
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
CONFIG_JFFS2_NAND_DEV
diff --git a/common/Makefile b/common/Makefile
index e2ff0cb..cecd81a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -159,6 +159,9 @@
obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
+ifdef CONFIG_LZMA
+obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
+endif
ifdef CONFIG_CMD_USB
obj-y += cmd_usb.o
obj-y += usb.o usb_hub.o
diff --git a/common/cmd_lzmadec.c b/common/cmd_lzmadec.c
new file mode 100644
index 0000000..7b0b3fd
--- /dev/null
+++ b/common/cmd_lzmadec.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2013 Patrice Bouchand <pbfwdlist_gmail_com>
+ * lzma uncompress command in Uboot
+ *
+ * made from existing cmd_unzip.c file of Uboot
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include <lzma/LzmaTools.h>
+
+static int do_lzmadec(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ unsigned long src, dst;
+ unsigned long src_len = ~0UL, dst_len = ~0UL;
+ int ret;
+
+ switch (argc) {
+ case 4:
+ dst_len = simple_strtoul(argv[3], NULL, 16);
+ /* fall through */
+ case 3:
+ src = simple_strtoul(argv[1], NULL, 16);
+ dst = simple_strtoul(argv[2], NULL, 16);
+ break;
+ default:
+ return CMD_RET_USAGE;
+ }
+
+ ret = lzmaBuffToBuffDecompress(map_sysmem(dst, dst_len), &src_len,
+ map_sysmem(src, 0), dst_len);
+
+ if (ret != SZ_OK)
+ return 1;
+ printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len);
+ setenv_hex("filesize", src_len);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ lzmadec, 4, 1, do_lzmadec,
+ "lzma uncompress a memory region",
+ "srcaddr dstaddr [dstsize]"
+);
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index 07011e9..f94c412 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -126,6 +126,28 @@
return ret;
}
+int dfu_flush(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
+{
+ int ret = 0;
+
+ if (dfu->flush_medium)
+ ret = dfu->flush_medium(dfu);
+
+ printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
+
+ /* clear everything */
+ dfu_free_buf();
+ dfu->crc = 0;
+ dfu->offset = 0;
+ dfu->i_blk_seq_num = 0;
+ dfu->i_buf_start = dfu_buf;
+ dfu->i_buf_end = dfu_buf;
+ dfu->i_buf = dfu->i_buf_start;
+ dfu->inited = 0;
+
+ return ret;
+}
+
int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
{
int ret = 0;
@@ -196,26 +218,6 @@
ret = tret;
}
- /* end? */
- if (size == 0) {
- /* Now try and flush to the medium if needed. */
- if (dfu->flush_medium)
- ret = dfu->flush_medium(dfu);
- printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
-
- /* clear everything */
- dfu_free_buf();
- dfu->crc = 0;
- dfu->offset = 0;
- dfu->i_blk_seq_num = 0;
- dfu->i_buf_start = dfu_buf;
- dfu->i_buf_end = dfu_buf;
- dfu->i_buf = dfu->i_buf_start;
-
- dfu->inited = 0;
-
- }
-
return ret = 0 ? size : ret;
}
diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c
index a045864..de75ff1 100644
--- a/drivers/usb/gadget/f_dfu.c
+++ b/drivers/usb/gadget/f_dfu.c
@@ -164,9 +164,14 @@
dfu_write(dfu_get_entity(f_dfu->altsetting), req->buf,
req->length, f_dfu->blk_seq_num);
+}
- if (req->length == 0)
- puts("DOWNLOAD ... OK\nCtrl+C to exit ...\n");
+static void dnload_request_flush(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_dfu *f_dfu = req->context;
+
+ dfu_flush(dfu_get_entity(f_dfu->altsetting), req->buf,
+ req->length, f_dfu->blk_seq_num);
}
static void handle_getstatus(struct usb_request *req)
@@ -174,19 +179,22 @@
struct dfu_status *dstat = (struct dfu_status *)req->buf;
struct f_dfu *f_dfu = req->context;
+ dfu_set_poll_timeout(dstat, 0);
+
switch (f_dfu->dfu_state) {
case DFU_STATE_dfuDNLOAD_SYNC:
case DFU_STATE_dfuDNBUSY:
f_dfu->dfu_state = DFU_STATE_dfuDNLOAD_IDLE;
break;
case DFU_STATE_dfuMANIFEST_SYNC:
+ f_dfu->dfu_state = DFU_STATE_dfuMANIFEST;
break;
+ case DFU_STATE_dfuMANIFEST:
+ dfu_set_poll_timeout(dstat, DFU_MANIFEST_POLL_TIMEOUT);
default:
break;
}
- dfu_set_poll_timeout(dstat, 0);
-
if (f_dfu->poll_timeout)
if (!(f_dfu->blk_seq_num %
(dfu_get_buf_size() / DFU_USB_BUFSIZ)))
@@ -446,10 +454,11 @@
switch (ctrl->bRequest) {
case USB_REQ_DFU_GETSTATUS:
/* We're MainfestationTolerant */
- f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+ f_dfu->dfu_state = DFU_STATE_dfuMANIFEST;
handle_getstatus(req);
f_dfu->blk_seq_num = 0;
value = RET_STAT_LEN;
+ req->complete = dnload_request_flush;
break;
case USB_REQ_DFU_GETSTATE:
handle_getstate(req);
@@ -460,6 +469,33 @@
break;
}
+ return value;
+}
+
+static int state_dfu_manifest(struct f_dfu *f_dfu,
+ const struct usb_ctrlrequest *ctrl,
+ struct usb_gadget *gadget,
+ struct usb_request *req)
+{
+ int value = 0;
+
+ switch (ctrl->bRequest) {
+ case USB_REQ_DFU_GETSTATUS:
+ /* We're MainfestationTolerant */
+ f_dfu->dfu_state = DFU_STATE_dfuIDLE;
+ handle_getstatus(req);
+ f_dfu->blk_seq_num = 0;
+ value = RET_STAT_LEN;
+ puts("DOWNLOAD ... OK\nCtrl+C to exit ...\n");
+ break;
+ case USB_REQ_DFU_GETSTATE:
+ handle_getstate(req);
+ break;
+ default:
+ f_dfu->dfu_state = DFU_STATE_dfuERROR;
+ value = RET_STALL;
+ break;
+ }
return value;
}
@@ -539,7 +575,7 @@
state_dfu_dnbusy, /* DFU_STATE_dfuDNBUSY */
state_dfu_dnload_idle, /* DFU_STATE_dfuDNLOAD_IDLE */
state_dfu_manifest_sync, /* DFU_STATE_dfuMANIFEST_SYNC */
- NULL, /* DFU_STATE_dfuMANIFEST */
+ state_dfu_manifest, /* DFU_STATE_dfuMANIFEST */
NULL, /* DFU_STATE_dfuMANIFEST_WAIT_RST */
state_dfu_upload_idle, /* DFU_STATE_dfuUPLOAD_IDLE */
state_dfu_error /* DFU_STATE_dfuERROR */
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 04171bd..fa62cb6 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -169,4 +169,6 @@
#define CONFIG_TPM_TIS_SANDBOX
+#define CONFIG_CMD_LZMADEC
+
#endif
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 98b6e72..721c4e6 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -265,6 +265,7 @@
#define CONFIG_DFU_NAND
#define CONFIG_CMD_DFU
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
+#define DFU_MANIFEST_POLL_TIMEOUT 25000
#endif /* CONFIG_SPL_BUILD */
diff --git a/include/dfu.h b/include/dfu.h
index f973426..6c71ecb 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -80,6 +80,9 @@
#ifndef DFU_DEFAULT_POLL_TIMEOUT
#define DFU_DEFAULT_POLL_TIMEOUT 0
#endif
+#ifndef DFU_MANIFEST_POLL_TIMEOUT
+#define DFU_MANIFEST_POLL_TIMEOUT DFU_DEFAULT_POLL_TIMEOUT
+#endif
struct dfu_entity {
char name[DFU_NAME_SIZE];
@@ -138,6 +141,7 @@
int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
+int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
/* Device specific */
#ifdef CONFIG_DFU_MMC
extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s);
diff --git a/tools/patman/README b/tools/patman/README
index 59f1776..b3aba13 100644
--- a/tools/patman/README
+++ b/tools/patman/README
@@ -217,8 +217,10 @@
to update the log there and then, knowing that the script will
do the rest.
- Cc: Their Name <email>
- This copies a single patch to another email address.
+Patch-cc: Their Name <email>
+ This copies a single patch to another email address. Note that the
+ Cc: used by git send-email is ignored by patman, but will be
+ interpreted by git send-email if you use it.
Series-process-log: sort, uniq
This tells patman to sort and/or uniq the change logs. It is
@@ -246,8 +248,9 @@
Once the patches are created, patman sends them using git send-email. The
whole series is sent to the recipients in Series-to: and Series-cc.
-You can Cc individual patches to other people with the Cc: tag. Tags in the
-subject are also picked up to Cc patches. For example, a commit like this:
+You can Cc individual patches to other people with the Patch-cc: tag. Tags
+in the subject are also picked up to Cc patches. For example, a commit like
+this:
>>>>
commit 10212537b85ff9b6e09c82045127522c0f0db981
@@ -258,16 +261,16 @@
This should make sending out e-mails to the right people easier.
- Cc: sandbox, mikef, ag
- Cc: afleming
+ Patch-cc: sandbox, mikef, ag
+ Patch-cc: afleming
<<<<
will create a patch which is copied to x86, arm, sandbox, mikef, ag and
afleming.
-If you have a cover letter it will get sent to the union of the CC lists of
-all of the other patches. If you want to sent it to additional people you
-can add a tag:
+If you have a cover letter it will get sent to the union of the Patch-cc
+lists of all of the other patches. If you want to sent it to additional
+people you can add a tag:
Cover-letter-cc: <list of addresses>
diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py
index 684204c..c4017e0 100644
--- a/tools/patman/patchstream.py
+++ b/tools/patman/patchstream.py
@@ -36,7 +36,7 @@
re_commit_tag = re.compile('^Commit-([a-z-]*): *(.*)')
# Commit tags that we want to collect and keep
-re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)')
+re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Patch-cc): (.*)')
# The start of a new commit in the git log
re_commit = re.compile('^commit ([0-9a-f]*)$')
@@ -267,7 +267,7 @@
if (tag_match.group(1) == 'Tested-by' and
tag_match.group(2).find(os.getenv('USER') + '@') != -1):
self.warn.append("Ignoring %s" % line)
- elif tag_match.group(1) == 'Cc':
+ elif tag_match.group(1) == 'Patch-cc':
self.commit.AddCc(tag_match.group(2).split(','))
else:
self.tags.append(line);