diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README
index d48c7ba..1edccf6 100644
--- a/board/freescale/mx6ul_14x14_evk/README
+++ b/board/freescale/mx6ul_14x14_evk/README
@@ -1,7 +1,7 @@
-How to use U-boot on Freescale MX6UL 14x14 EVK
+How to use U-Boot on Freescale MX6UL 14x14 EVK
 -----------------------------------------------
 
-- Build U-boot for MX6UL 14x14 EVK:
+- Build U-Boot for MX6UL 14x14 EVK:
 
 $ make mrproper
 $ make mx6ul_14x14_evk_defconfig
@@ -28,5 +28,5 @@
 - Connect the USB cable between the EVK and the PC for the console.
 (The USB console connector is the one close the push buttons)
 
-- Insert the micro SD card in the board, power it up and U-boot messages should
+- Insert the micro SD card in the board, power it up and U-Boot messages should
 come up.
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index b9b3573..98d5675 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -394,7 +394,7 @@
 
 	/*
 	 * According to the board_mmc_init() the following map is done:
-	 * (U-boot device node)    (Physical Port)
+	 * (U-Boot device node)    (Physical Port)
 	 * mmc0                    USDHC1
 	 * mmc1                    USDHC2
 	 */