apalis_imx6: switch to zimage
Switch to the generic compressed Kernel image type (zImage) instead of
the U-Boot specific uImage format.
While at it also fix device tree naming for MMC DFU.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index a49b08b..c8aa1bd 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -118,17 +118,17 @@
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
-#else
+#else /* CONFIG_SPL_BUILD */
#define BOOTENV
-#endif
+#endif /* CONFIG_SPL_BUILD */
#define DFU_ALT_EMMC_INFO \
"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
"boot part 0 1;" \
"rootfs part 0 2;" \
- "uImage fat 0 1;" \
- "imx6q-colibri-eval-v3.dtb fat 0 1;" \
- "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+ "zImage fat 0 1;" \
+ "imx6q-apalis-eval.dtb fat 0 1;" \
+ "imx6q-apalis-cam-eval.dtb fat 0 1"
#define EMMC_BOOTCMD \
"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \
@@ -138,7 +138,7 @@
"${vidargs}; echo Booting from internal eMMC chip...; " \
"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} ${dtbparam}\0" \
"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
@@ -158,11 +158,11 @@
"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-#define SD_BOOTCMD \
+#define SD_BOOTCMD \
"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \
"rootwait\0" \
"sdboot=run setup; " \
@@ -170,7 +170,7 @@
"${vidargs}; echo Booting from SD card; " \
"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} ${dtbparam}\0" \
"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
@@ -181,7 +181,7 @@
"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
"${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "bootz ${kernel_addr_r} ${dtbparam}\0" \
"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
@@ -197,7 +197,7 @@
"run distro_bootcmd ; " \
"usb start ; " \
"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
- "boot_file=uImage\0" \
+ "boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \