clk: sunxi: Use a single driver for all variants
Now that all of the variants use the same bind/probe functions and ops,
there is no need to have a separate driver for each variant. Since most
SoCs contain two variants (the main CCU and PRCM CCU), this saves a bit
of firmware size and RAM.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[Andre: add F1C100s support]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/drivers/clk/sunxi/clk_h616.c b/drivers/clk/sunxi/clk_h616.c
index 1ecccd7..964636d 100644
--- a/drivers/clk/sunxi/clk_h616.c
+++ b/drivers/clk/sunxi/clk_h616.c
@@ -109,25 +109,9 @@
[RST_BUS_OTG] = RESET(0xa8c, BIT(24)),
};
-static const struct ccu_desc h616_ccu_desc = {
+const struct ccu_desc h616_ccu_desc = {
.gates = h616_gates,
.resets = h616_resets,
.num_gates = ARRAY_SIZE(h616_gates),
.num_resets = ARRAY_SIZE(h616_resets),
};
-
-static const struct udevice_id h616_ccu_ids[] = {
- { .compatible = "allwinner,sun50i-h616-ccu",
- .data = (ulong)&h616_ccu_desc },
- { }
-};
-
-U_BOOT_DRIVER(clk_sun50i_h616) = {
- .name = "sun50i_h616_ccu",
- .id = UCLASS_CLK,
- .of_match = h616_ccu_ids,
- .priv_auto = sizeof(struct ccu_priv),
- .ops = &sunxi_clk_ops,
- .probe = sunxi_clk_probe,
- .bind = sunxi_clk_bind,
-};