blob: 9ce68e1a47c90905763b3cad235f7135d416ab70 [file] [log] [blame]
/*
* linux/drivers/mtd/onenand/onenand_base.c
*
* Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <common.h>
#include <linux/mtd/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <malloc.h>
/* It should access 16-bit instead of 8-bit */
static inline void *memcpy_16(void *dst, const void *src, unsigned int len)
{
void *ret = dst;
short *d = dst;
const short *s = src;
len >>= 1;
while (len-- > 0)
*d++ = *s++;
return ret;
}
static const unsigned char ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
};
/**
* onenand_readw - [OneNAND Interface] Read OneNAND register
* @param addr address to read
*
* Read OneNAND register
*/
static unsigned short onenand_readw(void __iomem * addr)
{
return readw(addr);
}
/**
* onenand_writew - [OneNAND Interface] Write OneNAND register with value
* @param value value to write
* @param addr address to write
*
* Write OneNAND register with value
*/
static void onenand_writew(unsigned short value, void __iomem * addr)
{
writew(value, addr);
}
/**
* onenand_block_address - [DEFAULT] Get block address
* @param device the device id
* @param block the block
* @return translated block address if DDP, otherwise same
*
* Setup Start Address 1 Register (F100h)
*/
static int onenand_block_address(int device, int block)
{
if (device & ONENAND_DEVICE_IS_DDP) {
/* Device Flash Core select, NAND Flash Block Address */
int dfs = 0, density, mask;
density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
mask = (1 << (density + 6));
if (block & mask)
dfs = 1;
return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1));
}
return block;
}
/**
* onenand_bufferram_address - [DEFAULT] Get bufferram address
* @param device the device id
* @param block the block
* @return set DBS value if DDP, otherwise 0
*
* Setup Start Address 2 Register (F101h) for DDP
*/
static int onenand_bufferram_address(int device, int block)
{
if (device & ONENAND_DEVICE_IS_DDP) {
/* Device BufferRAM Select */
int dbs = 0, density, mask;
density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
mask = (1 << (density + 6));
if (block & mask)
dbs = 1;
return (dbs << ONENAND_DDP_SHIFT);
}
return 0;
}
/**
* onenand_page_address - [DEFAULT] Get page address
* @param page the page address
* @param sector the sector address
* @return combined page and sector address
*
* Setup Start Address 8 Register (F107h)
*/
static int onenand_page_address(int page, int sector)
{
/* Flash Page Address, Flash Sector Address */
int fpa, fsa;
fpa = page & ONENAND_FPA_MASK;
fsa = sector & ONENAND_FSA_MASK;
return ((fpa << ONENAND_FPA_SHIFT) | fsa);
}
/**
* onenand_buffer_address - [DEFAULT] Get buffer address
* @param dataram1 DataRAM index
* @param sectors the sector address
* @param count the number of sectors
* @return the start buffer value
*
* Setup Start Buffer Register (F200h)
*/
static int onenand_buffer_address(int dataram1, int sectors, int count)
{
int bsa, bsc;
/* BufferRAM Sector Address */
bsa = sectors & ONENAND_BSA_MASK;
if (dataram1)
bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */
else
bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */
/* BufferRAM Sector Count */
bsc = count & ONENAND_BSC_MASK;
return ((bsa << ONENAND_BSA_SHIFT) | bsc);
}
/**
* onenand_command - [DEFAULT] Send command to OneNAND device
* @param mtd MTD device structure
* @param cmd the command to be sent
* @param addr offset to read from or write to
* @param len number of bytes to read or write
*
* Send command to OneNAND device. This function is used for middle/large page
* devices (1KB/2KB Bytes per page)
*/
static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
size_t len)
{
struct onenand_chip *this = mtd->priv;
int value, readcmd = 0;
int block, page;
/* Now we use page size operation */
int sectors = 4, count = 4;
/* Address translation */
switch (cmd) {
case ONENAND_CMD_UNLOCK:
case ONENAND_CMD_LOCK:
case ONENAND_CMD_LOCK_TIGHT:
block = -1;
page = -1;
break;
case ONENAND_CMD_ERASE:
case ONENAND_CMD_BUFFERRAM:
block = (int)(addr >> this->erase_shift);
page = -1;
break;
default:
block = (int)(addr >> this->erase_shift);
page = (int)(addr >> this->page_shift);
page &= this->page_mask;
break;
}
/* NOTE: The setting order of the registers is very important! */
if (cmd == ONENAND_CMD_BUFFERRAM) {
/* Select DataRAM for DDP */
value = onenand_bufferram_address(this->device_id, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS2);
/* Switch to the next data buffer */
ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
if (block != -1) {
/* Write 'DFS, FBA' of Flash */
value = onenand_block_address(this->device_id, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS1);
}
if (page != -1) {
int dataram;
switch (cmd) {
case ONENAND_CMD_READ:
case ONENAND_CMD_READOOB:
dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
readcmd = 1;
break;
default:
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
/* Write 'FPA, FSA' of Flash */
value = onenand_page_address(page, sectors);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS8);
/* Write 'BSA, BSC' of DataRAM */
value = onenand_buffer_address(dataram, sectors, count);
this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
if (readcmd) {
/* Select DataRAM for DDP */
value =
onenand_bufferram_address(this->device_id, block);
this->write_word(value,
this->base +
ONENAND_REG_START_ADDRESS2);
}
}
/* Interrupt clear */
this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
/* Write command */
this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
return 0;
}
/**
* onenand_wait - [DEFAULT] wait until the command is done
* @param mtd MTD device structure
* @param state state to select the max. timeout value
*
* Wait for command done. This applies to all OneNAND command
* Read can take up to 30us, erase up to 2ms and program up to 350us
* according to general OneNAND specs
*/
static int onenand_wait(struct mtd_info *mtd, int state)
{
struct onenand_chip *this = mtd->priv;
unsigned int flags = ONENAND_INT_MASTER;
unsigned int interrupt = 0;
unsigned int ctrl, ecc;
while (1) {
interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
if (interrupt & flags)
break;
}
ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_wait: controller error = 0x%04x\n", ctrl);
return -EAGAIN;
}
if (ctrl & ONENAND_CTRL_LOCK) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_wait: it's locked error = 0x%04x\n", ctrl);
return -EIO;
}
if (interrupt & ONENAND_INT_READ) {
ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
if (ecc & ONENAND_ECC_2BIT_ALL) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_wait: ECC error = 0x%04x\n", ecc);
return -EBADMSG;
}
}
return 0;
}
/**
* onenand_bufferram_offset - [DEFAULT] BufferRAM offset
* @param mtd MTD data structure
* @param area BufferRAM area
* @return offset given area
*
* Return BufferRAM offset given area
*/
static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
{
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
return mtd->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
return 0;
}
/**
* onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Read the BufferRAM area
*/
static int onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
memcpy_16(buffer, bufferram + offset, count);
return 0;
}
/**
* onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Read the BufferRAM area with Sync. Burst Mode
*/
static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
memcpy_16(buffer, bufferram + offset, count);
this->mmcontrol(mtd, 0);
return 0;
}
/**
* onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
* @param mtd MTD data structure
* @param area BufferRAM area
* @param buffer the databuffer to put/get data
* @param offset offset to read from or write to
* @param count number of bytes to read/write
*
* Write the BufferRAM area
*/
static int onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer, int offset,
size_t count)
{
struct onenand_chip *this = mtd->priv;
void __iomem *bufferram;
bufferram = this->base + area;
bufferram += onenand_bufferram_offset(mtd, area);
memcpy_16(bufferram + offset, buffer, count);
return 0;
}
/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
* @param addr address to check
* @return 1 if there are valid data, otherwise 0
*
* Check bufferram if there is data we required
*/
static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
{
struct onenand_chip *this = mtd->priv;
int block, page;
int i;
block = (int)(addr >> this->erase_shift);
page = (int)(addr >> this->page_shift);
page &= this->page_mask;
i = ONENAND_CURRENT_BUFFERRAM(this);
/* Is there valid data? */
if (this->bufferram[i].block == block &&
this->bufferram[i].page == page && this->bufferram[i].valid)
return 1;
return 0;
}
/**
* onenand_update_bufferram - [GENERIC] Update BufferRAM information
* @param mtd MTD data structure
* @param addr address to update
* @param valid valid flag
*
* Update BufferRAM information
*/
static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
int valid)
{
struct onenand_chip *this = mtd->priv;
int block, page;
int i;
block = (int)(addr >> this->erase_shift);
page = (int)(addr >> this->page_shift);
page &= this->page_mask;
/* Invalidate BufferRAM */
for (i = 0; i < MAX_BUFFERRAM; i++) {
if (this->bufferram[i].block == block &&
this->bufferram[i].page == page)
this->bufferram[i].valid = 0;
}
/* Update BufferRAM */
i = ONENAND_CURRENT_BUFFERRAM(this);
this->bufferram[i].block = block;
this->bufferram[i].page = page;
this->bufferram[i].valid = valid;
return 0;
}
/**
* onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
* @param mtd MTD data structure
* @param addr start address to invalidate
* @param len length to invalidate
*
* Invalidate BufferRAM information
*/
static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
unsigned int len)
{
struct onenand_chip *this = mtd->priv;
int i;
loff_t end_addr = addr + len;
/* Invalidate BufferRAM */
for (i = 0; i < MAX_BUFFERRAM; i++) {
loff_t buf_addr = this->bufferram[i].block << this->erase_shift;
if (buf_addr >= addr && buf_addr < end_addr)
this->bufferram[i].valid = 0;
}
}
/**
* onenand_get_device - [GENERIC] Get chip for selected access
* @param mtd MTD device structure
* @param new_state the state which is requested
*
* Get the device and lock it for exclusive access
*/
static void onenand_get_device(struct mtd_info *mtd, int new_state)
{
/* Do nothing */
}
/**
* onenand_release_device - [GENERIC] release chip
* @param mtd MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
static void onenand_release_device(struct mtd_info *mtd)
{
/* Do nothing */
}
/**
* onenand_read_ecc - [MTD Interface] Read data with ECC
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
* @param oob_buf filesystem supplied oob data buffer
* @param oobsel oob selection structure
*
* OneNAND read with ECC
*/
static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf,
u_char * oob_buf, struct nand_oobinfo *oobsel)
{
struct onenand_chip *this = mtd->priv;
int read = 0, column;
int thislen;
int ret = 0;
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_ecc: "
"from = 0x%08x, len = %i\n",
(unsigned int)from, (int)len);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_ecc: "
"Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
while (read < len) {
thislen = min_t(int, mtd->writesize, len - read);
column = from & (mtd->writesize - 1);
if (column + thislen > mtd->writesize)
thislen = mtd->writesize - column;
if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from,
mtd->writesize);
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
onenand_update_bufferram(mtd, from, 1);
}
this->read_bufferram(mtd, ONENAND_DATARAM, buf, column,
thislen);
read += thislen;
if (read == len)
break;
if (ret) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_read_ecc: read failed = %d\n", ret);
break;
}
from += thislen;
buf += thislen;
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
*retlen = read;
return ret;
}
/**
* onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
*
* This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
*/
int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf)
{
return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
}
/**
* onenand_read_oob - [MTD Interface] OneNAND read out-of-band
* @param mtd MTD device structure
* @param from offset to read from
* @param len number of bytes to read
* @param retlen pointer to variable to store the number of read bytes
* @param buf the databuffer to put data
*
* OneNAND read out-of-band data from the spare area
*/
int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, u_char * buf)
{
struct onenand_chip *this = mtd->priv;
int read = 0, thislen, column;
int ret = 0;
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_read_oob: "
"from = 0x%08x, len = %i\n",
(unsigned int)from, (int)len);
/* Initialize return length value */
*retlen = 0;
/* Do not allow reads past end of device */
if (unlikely((from + len) > mtd->size)) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_read_oob: "
"Attempt read beyond end of device\n");
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_READING);
column = from & (mtd->oobsize - 1);
while (read < len) {
thislen = mtd->oobsize - column;
thislen = min_t(int, thislen, len);
this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
onenand_update_bufferram(mtd, from, 0);
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column,
thislen);
read += thislen;
if (read == len)
break;
if (ret) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_read_oob: read failed = %d\n", ret);
break;
}
buf += thislen;
/* Read more? */
if (read < len) {
/* Page size */
from += mtd->writesize;
column = 0;
}
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
*retlen = read;
return ret;
}
#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
/**
* onenand_verify_page - [GENERIC] verify the chip contents after a write
* @param mtd MTD device structure
* @param buf the databuffer to verify
*
* Check DataRAM area directly
*/
static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
loff_t addr)
{
struct onenand_chip *this = mtd->priv;
void __iomem *dataram0, *dataram1;
int ret = 0;
this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
ret = this->wait(mtd, FL_READING);
if (ret)
return ret;
onenand_update_bufferram(mtd, addr, 1);
/* Check, if the two dataram areas are same */
dataram0 = this->base + ONENAND_DATARAM;
dataram1 = dataram0 + mtd->writesize;
if (memcmp(dataram0, dataram1, mtd->writesize))
return -EBADMSG;
return 0;
}
#else
#define onenand_verify_page(...) (0)
#endif
#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0)
/**
* onenand_write_ecc - [MTD Interface] OneNAND write with ECC
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
* @param eccbuf filesystem supplied oob data buffer
* @param oobsel oob selection structure
*
* OneNAND write with ECC
*/
static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
size_t * retlen, const u_char * buf,
u_char * eccbuf, struct nand_oobinfo *oobsel)
{
struct onenand_chip *this = mtd->priv;
int written = 0;
int ret = 0;
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_ecc: "
"to = 0x%08x, len = %i\n",
(unsigned int)to, (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: "
"Attempt write to past end of device\n");
return -EINVAL;
}
/* Reject writes, which are not page aligned */
if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_ecc: "
"Attempt to write not page aligned data\n");
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, mtd->writesize, len - written);
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize);
this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0,
mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
onenand_update_bufferram(mtd, to, 1);
ret = this->wait(mtd, FL_WRITING);
if (ret) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_write_ecc: write filaed %d\n", ret);
break;
}
written += thislen;
/* Only check verify write turn on */
ret = onenand_verify_page(mtd, (u_char *) buf, to);
if (ret) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_write_ecc: verify failed %d\n", ret);
break;
}
if (written == len)
break;
to += thislen;
buf += thislen;
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
*retlen = written;
return ret;
}
/**
* onenand_write - [MTD Interface] compability function for onenand_write_ecc
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
*
* This function simply calls onenand_write_ecc
* with oob buffer and oobsel = NULL
*/
int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t * retlen, const u_char * buf)
{
return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL);
}
/**
* onenand_write_oob - [MTD Interface] OneNAND write out-of-band
* @param mtd MTD device structure
* @param to offset to write to
* @param len number of bytes to write
* @param retlen pointer to variable to store the number of written bytes
* @param buf the data to write
*
* OneNAND write out-of-band
*/
int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
size_t * retlen, const u_char * buf)
{
struct onenand_chip *this = mtd->priv;
int column, status;
int written = 0;
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_write_oob: "
"to = 0x%08x, len = %i\n",
(unsigned int)to, (int)len);
/* Initialize retlen, in case of early exit */
*retlen = 0;
/* Do not allow writes past end of device */
if (unlikely((to + len) > mtd->size)) {
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_write_oob: "
"Attempt write to past end of device\n");
return -EINVAL;
}
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, mtd->oobsize, len - written);
column = to & (mtd->oobsize - 1);
this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0,
mtd->oobsize);
this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column,
thislen);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
status = this->wait(mtd, FL_WRITING);
if (status)
break;
written += thislen;
if (written == len)
break;
to += thislen;
buf += thislen;
}
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
*retlen = written;
return 0;
}
/**
* onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
* @param mtd MTD device structure
* @param ofs offset from device start
* @param allowbbt 1, if its allowed to access the bbt area
*
* Check, if the block is bad, Either by reading the bad block table or
* calling of the scan function.
*/
static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
/* Return info from the table */
return bbm->isbad_bbt(mtd, ofs, allowbbt);
}
/**
* onenand_erase - [MTD Interface] erase block(s)
* @param mtd MTD device structure
* @param instr erase instruction
*
* Erase one ore more blocks
*/
int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct onenand_chip *this = mtd->priv;
unsigned int block_size;
loff_t addr;
int len;
int ret = 0;
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n",
(unsigned int)instr->addr, (unsigned int)instr->len);
block_size = (1 << this->erase_shift);
/* Start address must align on block boundary */
if (unlikely(instr->addr & (block_size - 1))) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_erase: Unaligned address\n");
return -EINVAL;
}
/* Length must align on block boundary */
if (unlikely(instr->len & (block_size - 1))) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_erase: Length not block aligned\n");
return -EINVAL;
}
/* Do not allow erase past end of device */
if (unlikely((instr->len + instr->addr) > mtd->size)) {
MTDDEBUG (MTD_DEBUG_LEVEL0,
"onenand_erase: Erase past end of device\n");
return -EINVAL;
}
instr->fail_addr = 0xffffffff;
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_ERASING);
/* Loop throught the pages */
len = instr->len;
addr = instr->addr;
instr->state = MTD_ERASING;
while (len) {
/* TODO Check badblock */
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
onenand_invalidate_bufferram(mtd, addr, block_size);
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
if (ret == -EPERM)
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
"Device is write protected!!!\n");
else
MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: "
"Failed erase, block %d\n",
(unsigned)(addr >> this->erase_shift));
instr->state = MTD_ERASE_FAILED;
instr->fail_addr = addr;
goto erase_exit;
}
len -= block_size;
addr += block_size;
}
instr->state = MTD_ERASE_DONE;
erase_exit:
ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
/* Do call back function */
if (!ret)
mtd_erase_callback(instr);
/* Deselect and wake up anyone waiting on the device */
onenand_release_device(mtd);
return ret;
}
/**
* onenand_sync - [MTD Interface] sync
* @param mtd MTD device structure
*
* Sync is actually a wait for chip ready function
*/
void onenand_sync(struct mtd_info *mtd)
{
MTDDEBUG (MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_SYNCING);
/* Release it and go back */
onenand_release_device(mtd);
}
/**
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
*
* Check whether the block is bad
*/
int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
int ret;
/* Check for invalid offset */
if (ofs > mtd->size)
return -EINVAL;
onenand_get_device(mtd, FL_READING);
ret = onenand_block_isbad_nolock(mtd,ofs, 0);
onenand_release_device(mtd);
return ret;
}
/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
*
* Mark the block as bad
*/
int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct onenand_chip *this = mtd->priv;
int ret;
ret = onenand_block_isbad(mtd, ofs);
if (ret) {
/* If it was bad already, return success and do nothing */
if (ret > 0)
return 0;
return ret;
}
ret = this->block_markbad(mtd, ofs);
return ret;
}
/**
* onenand_unlock - [MTD Interface] Unlock block(s)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to unlock
*
* Unlock one or more blocks
*/
int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
{
struct onenand_chip *this = mtd->priv;
int start, end, block, value, status;
start = ofs >> this->erase_shift;
end = len >> this->erase_shift;
/* Continuous lock scheme */
if (this->options & ONENAND_CONT_LOCK) {
/* Set start block address */
this->write_word(start,
this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Set end block address */
this->write_word(end - 1,
this->base + ONENAND_REG_END_BLOCK_ADDRESS);
/* Write unlock command */
this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
/* There's no return value */
this->wait(mtd, FL_UNLOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
& ONENAND_CTRL_ONGO)
continue;
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & ONENAND_WP_US))
printk(KERN_ERR "wp status = 0x%x\n", status);
return 0;
}
/* Block lock scheme */
for (block = start; block < end; block++) {
/* Set start block address */
this->write_word(block,
this->base + ONENAND_REG_START_BLOCK_ADDRESS);
/* Write unlock command */
this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
/* There's no return value */
this->wait(mtd, FL_UNLOCKING);
/* Sanity check */
while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
& ONENAND_CTRL_ONGO)
continue;
/* Set block address for read block status */
value = onenand_block_address(this->device_id, block);
this->write_word(value,
this->base + ONENAND_REG_START_ADDRESS1);
/* Check lock status */
status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
if (!(status & ONENAND_WP_US))
printk(KERN_ERR "block = %d, wp status = 0x%x\n",
block, status);
}
return 0;
}
/**
* onenand_print_device_info - Print device ID
* @param device device ID
*
* Print device ID
*/
char * onenand_print_device_info(int device)
{
int vcc, demuxed, ddp, density;
char *dev_info = malloc(80);
vcc = device & ONENAND_DEVICE_VCC_MASK;
demuxed = device & ONENAND_DEVICE_IS_DEMUX;
ddp = device & ONENAND_DEVICE_IS_DDP;
density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
demuxed ? "" : "Muxed ",
ddp ? "(DDP)" : "",
(16 << density), vcc ? "2.65/3.3" : "1.8", device);
return dev_info;
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
{ONENAND_MFR_SAMSUNG, "Samsung"},
{ONENAND_MFR_UNKNOWN, "Unknown"}
};
/**
* onenand_check_maf - Check manufacturer ID
* @param manuf manufacturer ID
*
* Check manufacturer ID
*/
static int onenand_check_maf(int manuf)
{
int i;
for (i = 0; onenand_manuf_ids[i].id; i++) {
if (manuf == onenand_manuf_ids[i].id)
break;
}
#ifdef ONENAND_DEBUG
printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n",
onenand_manuf_ids[i].name, manuf);
#endif
return (i != ONENAND_MFR_UNKNOWN);
}
/**
* onenand_probe - [OneNAND Interface] Probe the OneNAND device
* @param mtd MTD device structure
*
* OneNAND detection method:
* Compare the the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
int bram_maf_id, bram_dev_id, maf_id, dev_id;
int version_id;
int density;
/* Send the command for reading device ID from BootRAM */
this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
/* Read manufacturer and device IDs from BootRAM */
bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
/* Check manufacturer ID */
if (onenand_check_maf(bram_maf_id))
return -ENXIO;
/* Reset OneNAND to read default register values */
this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
/* Wait reset */
this->wait(mtd, FL_RESETING);
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
/* Check OneNAND device */
if (maf_id != bram_maf_id || dev_id != bram_dev_id)
return -ENXIO;
/* FIXME : Current OneNAND MTD doesn't support Flex-OneNAND */
if (dev_id & (1 << 9)) {
printk("Not yet support Flex-OneNAND\n");
return -ENXIO;
}
/* Flash device information */
mtd->name = onenand_print_device_info(dev_id);
this->device_id = dev_id;
density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
this->chipsize = (16 << density) << 20;
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
mtd->writesize =
this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
mtd->oobsize = mtd->writesize >> 5;
/* Pagers per block is always 64 in OneNAND */
mtd->erasesize = mtd->writesize << 6;
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->ppb_shift = (this->erase_shift - this->page_shift);
this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
/* REVIST: Multichip handling */
mtd->size = this->chipsize;
/* Version ID */
version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
#ifdef ONENAND_DEBUG
printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id);
#endif
/* Lock scheme */
if (density <= ONENAND_DEVICE_DENSITY_512Mb &&
!(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) {
printk(KERN_INFO "Lock scheme is Continues Lock\n");
this->options |= ONENAND_CONT_LOCK;
}
mtd->flags = MTD_CAP_NANDFLASH;
mtd->erase = onenand_erase;
mtd->read = onenand_read;
mtd->write = onenand_write;
mtd->read_oob = onenand_read_oob;
mtd->write_oob = onenand_write_oob;
mtd->sync = onenand_sync;
mtd->block_isbad = onenand_block_isbad;
mtd->block_markbad = onenand_block_markbad;
return 0;
}
/**
* onenand_scan - [OneNAND Interface] Scan for the OneNAND device
* @param mtd MTD device structure
* @param maxchips Number of chips to scan for
*
* This fills out all the not initialized function pointers
* with the defaults.
* The flash ID is read and the mtd/chip structures are
* filled with the appropriate values.
*/
int onenand_scan(struct mtd_info *mtd, int maxchips)
{
struct onenand_chip *this = mtd->priv;
if (!this->read_word)
this->read_word = onenand_readw;
if (!this->write_word)
this->write_word = onenand_writew;
if (!this->command)
this->command = onenand_command;
if (!this->wait)
this->wait = onenand_wait;
if (!this->read_bufferram)
this->read_bufferram = onenand_read_bufferram;
if (!this->write_bufferram)
this->write_bufferram = onenand_write_bufferram;
if (onenand_probe(mtd))
return -ENXIO;
/* Set Sync. Burst Read after probing */
if (this->mmcontrol) {
printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
this->read_bufferram = onenand_sync_read_bufferram;
}
onenand_unlock(mtd, 0, mtd->size);
return onenand_default_bbt(mtd);
}
/**
* onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
* @param mtd MTD device structure
*/
void onenand_release(struct mtd_info *mtd)
{
}